2
E2 or E1 on-chip debugging emulator Design tool (with code generation function, etc.) www.renesas.com 2018.03 Coding tool (editor) Build tool (compiler) Debugging tool (E2, etc.) Bluetooth ® low energy Solution Using Bluetooth ® low energy to connect all sorts of IoT devices to the Internet Bluetooth ® low energy applications combining low power con- sumption and the ability to connect wirelessly with smartphones are proliferating rapidly. Examples include healthcare and fitness devices, electric home appliances, and wireless tags such as beacons. Renesas offers solutions that support Bluetooth ® low energy technology while achieving power consumption among the lowest in the industry. Available as a chip or a module IC (RL78/G1D) Module (RL78/G1D module) Bluetooth ® SIG certification can be cited when registering products. The chip incorporates a balun element and a filter, so it is only necessary to connect an antenna. The need for fewer external components helps simplify design and quality control. It also supports the long- term product supply program. Size: 8.95 × 13.35 × 1.7 mm The module incorporates an antenna and an RF circuit, so the many function pins of the RL78/G1D remain available for use. This is the best Bluetooth ® low energy module available, delivering a good balance between size and number of function pins. Note: Compliant with relevant radio laws (Japan, FCC, IC, CE) and Bluetooth ® SIG certified. Bluetooth ® SIG certified RL78/G1D and Bluetooth ® low energy protocol stack Solutions based on development tools for our general-purpose MCUs are available. Build Coding Debug Initial evaluation Development Mass production E2 or E1 programmer Flash programming software Renesas Flash Programmer Flash Programmer PG-FP6 ▪ Bluetooth ® low energy protocol stack ▪ Sample programs (drivers, apps) Software Application notes Emulator system IDE CS+ Module evaluation board Evaluation board RF evaluation, functional evaluation, etc. GUI tools Start using sample programs and GUI tools right away. Make use of development tools for general-purpose MCUs. Bluetooth ® low energy Accelerate Realization of IoT of Embedded Devices ▪ RF block board design guidelines ▪ Instructions for obtaining approval under the Japan Radio Law ▪ Quick start guide And more

Bluetooth® low energy Solution - Renesas Electronics · Bluetooth® low energy protocol stack The Bluetooth® low energy protocol stack is software required to operate the RL78/G1D

  • Upload
    others

  • View
    17

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Bluetooth® low energy Solution - Renesas Electronics · Bluetooth® low energy protocol stack The Bluetooth® low energy protocol stack is software required to operate the RL78/G1D

E2 or E1 on-chip debugging emulator

Design tool (with code generation function, etc.)

www.renesas.com 2018.03

Coding tool (editor)

Build tool (compiler)

Debugging tool (E2, etc.)

Bluetooth® low energy SolutionUsing Bluetooth® low energy to connect all sorts of IoT devices to the InternetBluetooth® low energy applications combining low power con-sumption and the ability to connect wirelessly with smartphones are proliferating rapidly. Examples include healthcare and fitness devices, electric home appliances, and wireless tags such as beacons. Renesas offers solutions that support Bluetooth® low energy technology while achieving power consumption among the lowest in the industry.

Available as a chip or a module

IC (RL78/G1D) Module (RL78/G1D module)

Bluetooth® SIG certification can be cited when registering products.

The chip incorporates a balun element and a filter, so it is only necessary to connect an antenna. The need for fewer external components helps simplify design and quality control. It also supports the long-term product supply program.

Size: 8.95 × 13.35 × 1.7 mmThe module incorporates an antenna and an RF circuit, so the many function pins of the RL78/G1D remain available for use. This is the best Bluetooth® low energy module available, delivering a good balance between size and number of function pins.Note: Compliant with relevant radio laws (Japan, FCC, IC, CE) and Bluetooth® SIG certified.

Bluetooth® SIG certified RL78/G1D and Bluetooth® low energy protocol stackSolutions based on development tools for our general-purpose MCUs are available.

Build

Coding Debug

Initial evaluation Development Mass production

E2 or E1 programmer

Flash programming softwareRenesas Flash Programmer

Flash ProgrammerPG-FP6

▪ Bluetooth® low energy protocol stack▪ Sample programs (drivers, apps)

SoftwareApplication notes

Emulator system

IDE CS+Module evaluation board

Evaluation board RF evaluation, functional evaluation, etc.

GUI tools

Start using sample programs and GUI tools right away. Make use of development tools for general-purpose MCUs.

Bluetooth® low energy

Accelerate Realization of IoT of Embedded Devices

▪ RF block board design guidelines▪ Instructions for obtaining approval under the Japan Radio Law▪ Quick start guideAnd more

Page 2: Bluetooth® low energy Solution - Renesas Electronics · Bluetooth® low energy protocol stack The Bluetooth® low energy protocol stack is software required to operate the RL78/G1D

R30PF0138EJ0100 © 2018 Renesas Electronics Corporation. All rights reserved.

Refer to "http://www.renesas.com" for information on the latest and detailed sales offices.

Module evaluation board

Detailed informationwww.renesas.com/solutions/bluetooth

Evaluation systems are available to let you try out our Bluetooth® low energy technology.

Evaluation system Development support tools

Bluetooth® low energy protocol stackThe Bluetooth® low energy protocol stack is software required

to operate the RL78/G1D. It supports modem configuration and

embedded configuration. It can also offer various profiles created

by Bluetooth® SIG. Of course, it can also adapt to custom profiles

created by customers. We offer Bluetooth® low energy software

solutions corresponding to a wide variety of application development.

Beacon stackThe beacon stack is designed specifically for beacon applications

and supports low power consumption. Beacons continuously transmit

identifiers such as IDs, URLs, or vendor information and can be used

to send ads or location information to smartphones, for example. It is

very important that they consume as little power as possible due to the

need to continue transmitting at all times.

GUI toolsEven if you are not familiar with BLE, you can easily conduct BLE

communication using GUI tools without writing a program. You can confirm the

API execution procedure and the setting values for various parameters while

actually conducting communication activities. Additionally, you can also develop

a program smoothly while referring to the results (logs) of the operation check.

This kit allows you to get started

using the Bluetooth® low energy

protocol stack right after purchasing

the evaluation board. It can be used

to evaluate the Renesas RL78/

G1D, to evaluate the operation of

Bluetooth® low energy systems, and

for proof-of-concept testing.

RL78/G1D evaluation board

Android/iOS application "RenesasBLE"The iOS/Android application, “RenesasBLE” created by

Renesas can be downloaded from each store. RenesasBLE

operates in conjunction with sample programs and you can immediately

experience Bluetooth® low energy. You can download all the sample

programs for Android, iOS and RL78/G1D. You can immediately link what

you experienced to the development.

Android/iOS application "GATTBrowser"The smartphone application, “GATTBrowser” can be

downloaded from App Store/Google Play. GATTBrowser

is the app to check the BLE behavior. It can scan BLE devices which

are advertising in around-device and can perform the GATT-based

communication with the connected BLE device. You can easy to check the

sample application behavior. GATTBrowser assist you to development of

RL78/G1D device.

Module evaluation board(Parts Number: RM-110-RFB-2)

(with terminal holes having a pitch of 2.54 mm)

Mountable on a breadboard. Sold by NAITO DENSEI MACHIDA MFG.CO.,LTD for early evaluation and

development.

* Bluetooth is a registered trademark of Bluetooth SIG, Inc. of the United States.

RL78/G1D evaluation board

Number of steps

Can also be interlocked with QE for BLE!

Total distance SpeedConnectable with RL78/G1D

evaluation board! Imitate the number of steps by

pushing the button.

GUI Tools

USB

RL78/G1D evaluation environment

Mountable on the RL78/G1D evaluation board (RTK0EN0001D01001BZ). Easily debuggable.