1
rack installations. Only one tank is re- quired for both striking and plating. The process plates out of the copper anodes rather than out of solution. Circle 412 on the reader service card Blast and Recovery Systems Empire Abrasive Equipmenf Co. Langhome, Pa. A new series of large-capacity PRS blast and recovery systems extends work cycles between media refills while reducing media purchase and disposal costs. These units are equipped with 10.5-ft3 pressure vessels plus 10.5-ft” media storage hoppers. Capable of recovering media at rates exceeding 70 pounds per minute, al1 PRS systems are equipped with a me- dia recovery hopper, a high-efficiency dust collector, and a tunable media re- claimer that can be adjusted to recycle most types of common abrasives while removing dust and fines. ( Circle 413 on the reader service card Blasting System Composifion Maferials Co. Inc. Fairfield, Conn. The Plasti-Grit System, specifically designed to accommodate Plasti-Grit media, is engineered for rapid, envi- ronmentally safe, and economie clean- ing and coatings removal from most surfaces and operates free of toxic chemical strippers. It removes coatings without etching, marring, warping, or otherwise damaging delicate sub- strates. The system is constructed of Cost-effective NMP brings environmental credentials and solvating power to Degreasing: High solvent activity Water miscible Economical conversion Low evaporation rate Recyclable For more information about using super- solvent NMP for Degreasing applications, cal1 BASF for technical literature and assistance. 800-82%NMZP Fax: 201-426-4752 Creative Chemistry for Creative Chemists. Circle 008 on reader information card quality materials with large double- walled doors. Circle 414 on the reader service card Electroless Nickel Process Controller Fidelify Chemical Producfs Corp. Newark, N. J. A user-friendly, automatie controller for electroless nickel baths is now available from Fidelity Chemical Prod- ucts Corp. The Model Ni240 Control- ler enables platers to continuously monitor a bath’s nickel concentration METAL FINISHING . OCTOBER 1996 69

Blast and recovery systems

Embed Size (px)

Citation preview

rack installations. Only one tank is re- quired for both striking and plating. The process plates out of the copper anodes rather than out of solution.

Circle 412 on the reader service card

Blast and Recovery Systems Empire Abrasive Equipmenf Co. Langhome, Pa.

A new series of large-capacity PRS blast and recovery systems extends work cycles between media refills while reducing media purchase and disposal costs. These units are equipped with 10.5-ft3 pressure vessels plus 10.5-ft” media storage hoppers. Capable of recovering media at rates exceeding 70 pounds per minute, al1 PRS systems are equipped with a me- dia recovery hopper, a high-efficiency dust collector, and a tunable media re- claimer that can be adjusted to recycle most types of common abrasives while removing dust and fines.

(

Circle 413 on the reader service card

Blasting System Composifion Maferials Co. Inc. Fairfield, Conn.

The Plasti-Grit System, specifically designed to accommodate Plasti-Grit media, is engineered for rapid, envi- ronmentally safe, and economie clean- ing and coatings removal from most surfaces and operates free of toxic chemical strippers. It removes coatings without etching, marring, warping, or otherwise damaging delicate sub- strates. The system is constructed of

Cost-effective NMP brings environmental credentials and solvating power to Degreasing:

High solvent activity

Water miscible

Economical conversion

Low evaporation rate

Recyclable

For more information about using super- solvent NMP for Degreasing applications, cal1 BASF for technical literature and assistance.

800-82%NMZP Fax: 201-426-4752

Creative Chemistry for Creative Chemists.

Circle 008 on reader information card

quality materials with large double- walled doors.

Circle 414 on the reader service card

Electroless Nickel Process Controller Fidelify Chemical Producfs Corp. Newark, N. J.

A user-friendly, automatie controller for electroless nickel baths is now available from Fidelity Chemical Prod- ucts Corp. The Model Ni240 Control- ler enables platers to continuously monitor a bath’s nickel concentration

METAL FINISHING . OCTOBER 1996 69