BROEN API 6D valves “State of the Art” in Ball Valve Technology Ballomax Reliable trunnion mounted ball valve design fully compliant with API 6D and CSA Z245.15-17 requirements. • Body options: - All welded body: no leak paths, preferred for under ground valves. - Three-piece bolted body: can be repaired as needed, preferred for above ground valves. • Size range for standard valves: 2” to 36”, ANSI 150, 300, 600. More sizes available upon request. • Temperature range for standard valves: -40°F (-40°C) up to +212°F (+100°C). • Spring-loaded seat design with unique features: - The BROEN valves are equipped with Primary Metal Secondary Soft (PMSS) seats: the primary metal seat protects the soft goods from debris in the flow path; the HNBR soft seat ensures a positive seal and a long, worry free valve life. BROEN is experienced with metal seated valves and other seal materials. Contact BROEN with any special requirements. - Self-relieving seat (Single Piston Effect seat, SPE): the seat releases any over-pressure in the body cavity to the side of lower pressure, assuring no excessive pressure within body cavity. - Double Piston Effect seat (DPE): any pressure is contained within the body cavity. An external relief device is recommended to avoid excessive pressure within the body cavity. On the left: SPE seat | On the right: DPE seat. Both seats are PMSS. BROEN Ballomax® API 6D Ball Valves www.broen.us BROEN Ballomax® API 6D Ball Valves

B ROEN API 6D valves

Download PDF Report

Upload
others
View
17
Download
0

Embed Size (px)

Citation preview

BROEN API 6D valves “State of the Art” in Ball Valve Technology

Ballomax

Reliable trunnion mounted ball valve design fully compliant with API 6Dand CSA Z245.15-17 requirements.

• Body options:

- All welded body: no leak paths, preferred for under ground valves.

- Three-piece bolted body: can be repaired as needed, preferred for

above ground valves.

• Size range for standard valves: 2” to 36”, ANSI 150, 300, 600.

More sizes available upon request.

• Temperature range for standard valves: -40°F (-40°C) up to +212°F (+100°C).

• Spring-loaded seat design with unique features:

- The BROEN valves are equipped with Primary Metal Secondary Soft (PMSS) seats: the primary metal seat protects the soft goods

from debris in the � ow path; the HNBR soft seat ensures a positive

seal and a long, worry free valve life.

BROEN is experienced with metal seated valves and other seal

materials. Contact BROEN with any special requirements.

- Self-relieving seat (Single Piston E� ect seat, SPE): the seat

releases any over-pressure in the body cavity to the side of lower

pressure, assuring no excessive pressure within body cavity.

- Double Piston E� ect seat (DPE): any pressure is contained within

the body cavity. An external relief device is recommended to avoid

excessive pressure within the body cavity.

On the left: SPE seat | On the right: DPE seat. Both seats are PMSS.

BROEN Ballomax® API 6D Ball Valves www.broen.us

BROEN Ballomax® API 6D Ball Valves

The combination of unique seat geometry, innovative materials, balanced spring system makes the BROEN API valves “State of the Art” in Ball Valve Technology

• Stem seal: four levels of protection with o-rings and chevron packing

combined with a lubricant/sealant injection port.

• All valves allow Double Block and Bleed in both open and close position.

• Additional standard features: Fire safe design per API 6FA; bi-directional

valve; anti-static device; anti-blow out stem design.

The value added by BROEN:- Valve Modi� cations: Stem Extensions, Welded Pups, Automation,

Specialty

Coatings all done by the manufacturer in-house under one roof.

- Certi� ed Quality: BROEN is ISO 9001:2015 and API Q1 certi� ed. All

valves tested before shipment.

- Centrally located in Houston Texas, the heart of the Oil and Gas Business.

- Four Regional Territory Managers and Three Master Distributors are