AVK Valves

T h e A V K G r o u pA V K G l o b a l p r o d u c t o f f e r i n g

Pr ice L i s t 2007

January 2007

AVK

AVK is one of the leading valve manufacturers for the water, gas and

sewage industries as well as Fire Protection worldwide.

Our product programme comprises a large range of valves, hydrants,

pipe fittings and accessories, each complying with the highest

standards of safety and durability.

Today, we are the only producer offering gate valves to most of the

common national and international standards such as ISO, CEN,

DIN, NF, BS, AWWA, JWWA, SABS, AS and GOST. Our global

position ensures that we are able to give you, your partners and

your customers the quality products you require.

product development

Market proximity has always been at the core of AVK's strategy;

close contact with the end-user ensures close monitoring of the

market and constant adaption and development of the product

programme to meet with market requirements. This takes place in

our development department in Denmark, an advanced technology

centre, where ideas and suggestions from many different countries

are gathered and where existing products are continually updated

and tested. In co-operation with the end user, new products are field

tested before the final market launch, thus achieving the best result

in the individual markets.

Sewage Treatment

Gate valves, knife valves, air valves,

check valves, butterfly valves etc.

Fire Protection

Gate valves and fire hydrants

Gas Supply

Gate valves and accessories,

fittings, plug valves, flow

limitors etc.

AVK’s four main segments:

Water Supply


air valves, swing check valves,

hydrants, butterfly valves etc.

Introduction

AVK 's P roduc t P rogramme

meets Your Requ i rements

AVK - Supp l i e r o f H igh

Qua l i t y P roduc ts

production

Production takes place in Denmark, the UK,

the Netherlands, Germany, France, Poland,

USA, Australia, China and Saudi Arabia.

AVK's products are also produced under

licence in several other countries.

Stock control and distribution to end users

are handled through a wide network of sales

companies, agents and dealers in more than

85 countries. These service the end-user,

allowing AVK to monitor market changes and

keep abreast of customer requirements.

Quality

AVK's products are marked by high,

consistent quality, competitive prices and

durability in line with market requirements.

This calls for strict quality control of the

production processes from beginning to

end and therefore AVK has been certified

according to ISO 9001.

When it comes to quality at AVK,

nothing is left to chance.

Approved

ApprovedListed

Listed

AVK Approvals and listings:

Introduction

DVGW

NF

KIWA

Introduction

Gate

valve

s

2006-01-01

Products for water according to DIN Price list 2006

Type AVK ref. nos. DN PN Weight Units Deliv.- Gross price mm bar kg pr. pallet code Euro

Series 06/30

StandardFlanged gate valveShort length DIN F4Ductile ironFlanges/drilling according to ISO/ENEPDM rubber wedgeEpoxy coatinginternally and externallyClosing direction: CTC or CTOPN 10/16DN 40-300

CTC CTO 06-040-30014 06-040-30114 40 10/16 10 36 A 198 06-050-30014 06-050-30114 50 10/16 11 36 A 208 06-065-30014 06-065-30114 65 10/16 14 30 A 290 06-080-30014 06-080-30114 80 10/16 18 20 A 290 06-100-30014 06-100-30114 100 10/16 23 20 A 342 06-125-30014 06-125-30114 125 10/16 31 15 A 588 06-150-30014 06-150-30114 150 10/16 46 10 A 588 06-200-30004 06-200-30104 200 10 65 10 A 1,024 06-200-30014 06-200-30114 200 16 65 10 A 1,076 06-250-30004 06-250-30104 250 10 102 8 A 1,606 06-250-30014 06-250-30114 250 16 102 8 A 1,686 06-300-30004 06-300-30104 300 10 149 6 A 2,244 06-300-30014 06-300-30114 300 16 149 6 A 2,356 DIN 1882 drilling 06-080-30036 80 10 18 20 B 310 06-100-30036 100 10 23 20 B 367 06-125-30036 125 10 31 15 B 628 06-150-30036 150 10 46 10 B 630 06-200-30036 200 10 65 10 B 1,090

06-040-34016 40 10/16 10 36 B 214 06-050-34016 50 10/16 11 36 B 224 06-065-34016 65 10/16 14 30 B 307 06-080-34016 80 10/16 18 20 B 318 06-100-34016 100 10/16 23 20 B 371 06-125-34014 125 10/16 31 15 B 621 06-150-34016 150 10/16 46 10 B 650 06-200-34006 200 10 65 10 B 1,161 06-200-34016 200 16 65 10 B 1,213 06-250-34006 250 10 102 8 B 1,771 06-250-34016 250 16 102 8 B 1,851 06-300-34006 300 10 149 6 B 2,419 06-300-34016 300 16 149 6 B 2,579

Series 06/34

Flanged gate valveShort length DIN F4Ductile ironEPDM rubber wedgeStem AISI 316 steel/DIN 1.4404Flanges/drilling according to ISO/ENEpoxy coatinginternally and externallyClosing direction: CTCPN 10/16DN 40-300

Available on request:- RG5 stem nut

8

Series 06/30

Flanged gate valveShort length DIN F4Ductile ironFlanges/drilling according to DIN 1882EPDM rubber wedgeEpoxy coatinginternally and externallyClosing direction: CTCDN 80-200

DIN

hoW To uSe ThIS prICe LIST:

The price list is divided into four sections related to the main standards and a fittings chapter:

DIN - AVK International A/S

BS - Aqua-Gas AVK Ltd.

AWWA - American AVK Company

AS - AVK Australia Ltd pty

Ductile iron fittings

each section is again divided into four segments:

WATer SuppLY

SeWAGe TreATMeNT

FIre proTeCTIoN

GAS SuppLY

hoW To FIND The rIGhT proDuCT:

1. Look for standard

2. Look for segment

3. Look for type of product

4. Delivery- A = max. 2 weeks code: B = max. 8 weeks C = > 8 weeks

hoW To FIND Your AVK pArTNer:

Look at the map. Find your colour code and matching AVK sales company.How to contact: please look at the last pages to find addresses, phone numbers, e-mails etc.

Continental Europe, Russia, Northern and Central Africa, South Eastern Europe - AVK International A/S

AVK Sales Companies: AVK Norge AS AVK Mittelmann Armaturen GmbH AVK Nederland BV AVK Belgium NV AVK Armadan Sp. z o.o. AVK FRANCE S.A. AVK Válvulas, S.A. UK and Ireland - Aqua-Gas AVK Ltd.

North America - American AVK Company

G e o g r a p h i c a l re g i o n s c o v e re d b y t h e AV K G ro u p

Austral Asia - AVK Australia pty Ltd

The Arabian Peninsula - Saudi Valves Manufacturing Co. Ltd.

Latin America and the Caribbean - AVK overseas

Asia - AVK overseas

China and Hong Kong - AVK China

Southern Africa - AVK Valves Southern Africa (pty) Ltd.

Designed according to DIN 3352 part 4D

IN

Basic DIN design standard 2007-07-10 10:47 CET

Water

02/60, Flanged gate valve (std.),Face to face DIN F5, Ductile iron

1

02/67, Flanged gate valve, Faceto face DIN F5, Ductile iron, RG5stem nut

2

02/68, Flanged gate valve, Faceto face DIN F5, Ductile iron,Exchangeable RG5 stem nut

2

02/75, Flanged gate valve, Faceto face DIN F5, Ductile iron,Exchange. stem sealing, NF

3

02/76, Flanged gate valve, Faceto face DIN F5, Ductile iron,Pos-indicator & handwheel

4

06/30, Flanged gate valve (std.),Face to face DIN F4, Ductile iron

4

06/34, Flanged gate valve, Faceto face DIN F4, Ductile iron, AISI316 stem

5

06/35, Flanged gate valve withPin Indicator, Face to face DINF4, Ductile iron

5

06/75, Flanged gate valve, Faceto face DIN F4, Ductile iron,Exchangeable stem sealing, NF

6

06/85, Flanged gate valve, Faceto face DIN F4, Ductile iron, RG5stem nut

7

15/42, Flanged gate valveprepared for actuator, Face toface DIN F4, Actuator on request

7


8

20/30, Flanged gate valve , Faceto face DIN F5, Ductile iron,Internal enamel

8

20/35, Flanged gate valve , Faceto face DIN F5, AISI 316 stem,Ductile iron, Internal enamel

8

26/00, Flanged gate valve, Faceto face DIN F4, Ductile iron

9

55/30, Flanged gate valveresilient seated, Long length F5

9

55/35, Flanged gate valve,resilient seated w. Powersaver,Long length F5

10

01/70, Socket gate valve, SupaPlus tensile couplings for UPVC,Ductile iron

11

12/51, Exchange valve excl.combi flange

11

32/10, Gate valve with spigotends for asbestos cement pipesto ISO class 18

12

32/40, Gate valve with longspigot ends for cast iron pipes toISO 2531 class 18

12

32/60, Gate valve with spigotends for asbestos cement pipesto ISO class 18, AISI 316 stem,

13

32/70, Gate valve with spigotends for cast iron pipes to ISO2531 class 18

13

38/80, Gate valve withflange/PE-pipe, Ductile iron

13

36/80, Gate valve with PE-pipes,Ductile iron

14

01/80, Socket gate valve, EUROsocket ends, for UPVC, Ductileiron

14

33/00, Gate valve with socketends for cast iron pipes to ISO2531

16

18/40, Combi-Tee with flangedends, Ductile iron

16

18/70, Combi-cross 4 outletflanged, Ductile iron

16

Designed according to DIN 3352 part 4

DIN


18/80, Combi-cross 3 outletflanged, Ductile iron

17

18/89, Extension piece for AVKcombi-cross

18

18/93, Ball valve for AVKcombi-cross

19

04/10, Surface box, Fixed streetcover, Grey cast iron, Distancering and square in ductile iron

19

04/11, Surface box, Floatingstreet cover, Ductile iron

19

04/12, Surface box, Universalstreet cover for AVK telescopicext. spindle, Ductile iron

19

04/20, Stem cap for extensionspindles

20

04/22, Stem cap for valves20

04/23, Stem cap for valves20

04/05, Stem extension for serviceconnection valves, Fixed length,Key adaptor #14-22, PC1 = Pipe

20

04/07, Stem extension for serviceconnection valves, Telescopic,Key adaptor #14-22, L8 = Actual

21

04/15, T-key for extensionspindles

21

08/00, Handwheel21

04/02, Stem extension for gatevalves, Fixed length, Keyadaptor #23-32, PC1 = Pipe cover

21

04/04, Stem extension for gatevalves, Telescopic, Key adaptor#23-32, L8 = Actual length

22

03/85, Service conn. valve withtensile resistant socketconnection/outside thread

23

03/65, Service connection valve,Tensile resistant screwcouplings for PE-pipes, Ductile

23

16/00, Brass service connectionvalve with T-top and brasstensile couplings

23

16/05, Brass service connectionvalve with AVK top and tensilecouplings

24

11/30, Angle service connectionvalve w. external thread/tensileresistant socket joint

24

16/29, Service connection valvewith socket joints/BSP thread,POM

24

16/80, Service connection valvewith PE-pipes, POM

25

03/00, Service connection valve,Internal thread, Ductile iron

25

03/10, Service connection valve,Internal thread, Ductile iron

25

03/40/60, Service connectionvalve for sidetapping, Ext./int.thread and tensile socket joint,

26

03/30, Service connection valve,Push in sockets for PE-pipes,Ductile iron

26

16/50, Service connection valvewith tensile resistant socketjoints, POM

26

03/90, Service connection valvewith PRK system for PE-pipes,Ductile iron

27

03/93, Service connection valvewith PRK system for PE-pipes,Ductile iron

27

16/20, Brass service connectionvalve with T-top and PRKcouplings

27


IN


16/25, Brass service connectionvalve with PRK-couplings

28

16/90, Service connection valvewith PRK-couplings, POM

28

16/01, Service connection valve,PRK/external conical pipethread, POM

28

11/00, Angle service connectionvalve, External/internal thread,Ductile iron

29

701/10, Automatic air valve,Single acting

29

701/20, Automatic air valve,Single acting

29

701/30, Single acting air valve,Inlet flange

29

701/40, Combination air valve,Double acting

30


30


30

701/84, Underground air valveinstallation system

30

29/40, Underground fire hydrantto EN 1074-6, PN 16

31

09/20, Fire hydrant, Aboveground, Stortz-Hose-coupling,Type B, Aluminium

31

09/30, Fire hydrant, Aboveground, Stortz-Hose-coupling,Type B, Ductile iron

32

09/50, Fire hydrant, Aboveground, Manual drainage, TypeA, Aluminium

32

84/70, Fire hydrant DN 80, aboveground, Stainless steel, ModelP6, PN 16

32

41/60, Swing check valve withfree shaft end

33

41/23, Swing check valve leverand weight kit

33

41/32, Swing check valve springkit

33

10/00, Tapping saddle for PVCand PE-pipes, Metric size

33

10/10, SMHM universal tappingsaddle for service ball valve

35

05/01, Combi-flange for D.I. PVC-and PE-pipes

35

05/02, Standard sealing ring forPE-pipes

36

05/03, Standard sealing ring forductile iron pipes

36

05/04, Non-tensile resistantsealing ring for D.I.-pipes, Acc.to EN 545

36

05/05, Tensile resistant sealingring for PVC-ppipes

36

05/06, Tensile resistant sealingring for D.I.-pipes, Acc. to EN 545

37

05/07, Tensile resistant sealingring for PE-pipes

37

05/08, Support bush for PE-pipes37

51/03, SMHM servive ball valvefor PE- and uPVC-pipes, Straightbore, Body in bronze, NF

38

Designed according to DIN 3352 part 4

DIN


51/04, SMHM servive ball valveuniversal type forPE/uPVC-pipes, Straight bore,

38

SEWAGE

02/76, Flanged gate valve, Faceto face DIN F5, Ductile iron,Pos-indicator & handwheel

39

06/34, Flanged gate valve, Faceto face DIN F4, Ductile iron, AISI316 stem

39


39

06/84, Flanged gate valve, Faceto face DIN F4, Ductile iron, AISI316 stem, NBR

40

06/89, Flanged gate valve withrising stem, Face to face DIN F4,Ductile iron

40


40


41

715/00, Accessories forpneumatic controlled valve

41

715/30, Pneumatic controlledvalve, with solenoid valve kit andprox. swit., Double-acting, Face

41

701/33, Kinetic air valve, Singleacting Large orifice

42


42

701/75, Short combination airvalve, Double acting, Reinforcednylon

42

702/10, Knife gate valve withnon-rising stem and handwheel

42

702/20, Knife gate valve withrising stem and handwheel

43

702/30, Knife gate valve with withquick operation lever

43

702/40, Knife gate valve withpneumatic double-actingactuator

43

702/50, Knife gate valve with ISOflange prepared for el-act. andrising stem

43

53/35, Ball check valve withflanges

44

53/30, Ball check valve with BSPthreads

44

53/40, Ball check valve instainless steel AISI 316 with BSPthread

44

41/60, Swing check valve withfree shaft end

44

41/61, Swing check valve withclosed bushings

45

41/23, Swing check valve leverand weight kit

45

41/32, Swing check valve springkit

45

GAS


46

02/74, Flanged gate valve, Faceto face DIN F5, Ductile iron, PG3

46


46


IN


06/74, Flanged gate valve, Faceto face DIN F4, Ductile iron, PG3

47

36/90, Gate valve with PE-pipes,Ductile iron

47

46/64, Gate valve with spigotends, face to face S8, PG3

48

46/70, Gate valve with spigotends, PG2

48

46/74, Gate valve with spigotends, PG3

49

03/25, Service conn. valve,Internal thread, Ductile iron, PN4 PG 2

50

FIRE PROTECTION

06/35, Flanged gate valve withPin Indicator, Face to face DINF4, Ductile iron

51

25/46, Flanged gate vale withrising stem OS&Y, AWWA C509

51

45/5, Resilient Seated DuctileIron Gate Valve, 250 PSI, FLFL

52

06/37, Grooved end gate valvewith Pin Indicator according toAWWA C 606, Ductile iron

52

Gross priceEUR

Deliv.-code

Units pr.pallet

Theoreticalweight kg

PN bar

DN mm

AVK ref. nos.Type

Series 02/60

Flanged gate valve(std.)Face to face DIN F5Ductile ironEPDM rubber wedgeStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 40-500

Note:# Valve having an increased bore (400 mm)## Valve having a reduced bore (400 mm)

003

206,00A241110/164002-040-6001214,00A201210/165002-050-6001300,00A171510/166502-065-6001300,00A141910/168002-080-6001354,00A122510/1610002-100-6001610,00A93310/1612502-125-6001610,00A84910/1615002-150-6001

1.060,00A6701020002-200-60001.114,00A6701620002-200-60011.662,00A41101025002-250-60001.746,00A41101625002-250-60012.322,00A21601030002-300-60002.438,00A21601630002-300-60014.826,00A23201035002-350-60004 #)5.066,00B23201635002-350-60014 #)6.508,00A23421040002-400-600066.834,00A23421640002-400-600167.028,00B13601045002-450-60004 ##)7.379,00B13601645002-450-60014 ##)9.762,00B14171050002-500-60004 ##)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 02/60

Flanged gate valve(std.)Face to face DIN F5Ductile ironEPDM rubber wedgeStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTODN 40-500


004

206,00241110/164002-040-6011214,00B201210/165002-050-6011300,00B171510/166502-065-6011300,00B141910/168002-080-6011354,00B122510/1610002-100-6011610,00B93310/1612502-125-6011610,00B84910/1615002-150-6011

1.060,00B6701020002-200-60101.662,00B41101025002-250-60102.322,00B21601030002-300-60104.826,00B23201035002-350-60106 #)5.066,00B23201635002-350-60116 #)6.508,00B23421040002-400-601066.834,00B23421640002-400-601169.762,00B14171050002-500-60106 ##)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 02/60

Flanged gate valve(std.)Face to face DIN F5Ductile ironEPDM rubber wedgeStandard flangedrilling to DIN1882Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 80-200

015

320,00A141910/168002-080-6003379,00B122510/1610002-100-6003650,00B93310/1612502-125-6003652,00B84910/1615002-150-6003

1.126,00B6701020002-200-6003

Gate valves

Products for water according to DIN

DIN

1 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 02/60

Flanged gate valve(std.)Face to face DIN F5Ductile ironEPDM rubber wedgewith DVGW W 270approvalStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKapprovedClosing direction: CTCDN 40-500


020

217,00A241110/164002-040-60017225,00A201210/165002-050-60017315,00A171510/166502-065-60017316,00A141910/168002-080-60017373,00A122510/1610002-100-60017642,00A93310/1612502-125-60017647,00A84910/1615002-150-60017

1.117,00A6701020002-200-600071.171,00A6701620002-200-600171.751,00A41101025002-250-600071.835,00A41101625002-250-600172.446,00A21601030002-300-600072.562,00A21601630002-300-600175.196,00A23201035002-350-60007 #)5.436,00A23201635002-350-60017 #)6.878,00A23421040002-400-600077.204,00A23421640002-400-600177.398,00A13601045002-450-60007 ##)7.749,00A13601645002-450-60017 ##)

10.132,00A14171050002-500-60007 ##)10.620,00A14171650002-500-60017 ##)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 02/67

Flanged gate valveFace to face DIN F5Ductile ironRG5 stem nutEPDM rubber wedgeStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 50-300

030

364,00B2012255002-050-67076493,00B1715256502-065-67076493,00B1419258002-080-67076543,00B12252510002-100-67076661,00B9332512502-125-67076830,00B8492515002-150-67076

1.226,00B6702520002-200-670761.806,00B41102525002-250-670762.523,00B21602530002-300-67076

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 02/68

Flanged gate valveFace to face DIN F5Ductile ironExchangeable RG5stem nutEPDM rubber wedgeStandard flangedrilling to ISO 7005-2,EN 1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 50-300

030

404,00A2012255002-050-6807605548,00A1715256502-065-6807605563,00A1419258002-080-6807605610,00A12252510002-100-6807605771,00A9332512502-125-6807605955,00A8492515002-150-6807605

1.451,00A6702520002-200-68076052.106,00A41102525002-250-68076052.923,00A21602530002-300-6807605

Gate valves


DIN

2 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 02/68

Flanged gate valveFace to face DIN F5Ductile ironExchangeable RG5stem nutEPDM rubber wedgeStandard flangedrilling to ISO 7005-2,EN 1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTODN 50-300

031

404,00B2012255002-050-6817605548,00B1715256502-065-6817605563,00B1419258002-080-6817605610,00B12252510002-100-6817605771,00B9332512502-125-6817605

1.451,00B6702520002-200-68176052.106,00B41102525002-250-68176052.923,00B21602530002-300-6817605

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 02/75

Flanged gate valveFace to face DIN F5Ductile ironExchange. stemsealingNF approvedEPDM rubber wedgeStandard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 40-500

Note:# Drilling according to DIN 1882## Valve having an increased bore (400

mm)### Valve having a reduced bore (400 mm)

003

246,00A241110/164002-040-75016254,00A241210/165002-050-75016355,00A171510/166502-065-75016360,00A141910/168002-080-75016380,00A1910/168002-080-75036 #)421,00A122510/1610002-100-75016720,00A93310/1612502-125-75016735,00A84910/1615002-150-75016

1.285,00A6701020002-200-750061.339,00B6701620002-200-750161.828,00A41101025002-250-750062.048,00B41101625002-250-750162.722,00A21601030002-300-750062.838,00B21601630002-300-750165.826,00A23201035002-350-75006 ##)6.071,00B23201635002-350-75016 ##)7.508,00A23421040002-400-750068.228,00B13601045002-450-75006 ###)

10.962,00B14171050002-500-75006 ###)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 02/75

Flanged gate valveFace to face DIN F5Ductile ironExchange. stemsealingNF approvedEPDM rubber wedgeStandard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTODN 40-500

Note:# Drilling according to DIN 1882## Valve having an increased bore (400

mm)### Valve having a reduced bore (400 mm)

004

246,00A241110/164002-040-75116254,00A241210/165002-050-75116355,00A171510/166502-065-75116360,00A141910/168002-080-75116380,00A1910/168002-080-75136 #)421,00A122510/1610002-100-75116720,00A93310/1612502-125-75116735,00A84910/1615002-150-75116

1.285,00A6701020002-200-751061.339,00B6651620002-200-751161.962,00A41101025002-250-751062.046,00B41101625002-250-751162.722,00A21601030002-300-751062.838,00B21601630002-300-751165.826,00B23201635002-350-75106 ##)7.508,00A23421040002-400-751068.228,00B13601045002-450-75106 ###)

10.962,00B14171050002-500-75106 ###)

Gate valves


DIN

3 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 02/76

Flanged gate valveFace to face DIN F5Ductile ironPos-indicator &handwheelEPDM rubber wedgeStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 40-400

Note:# Valve having an increased bore (400 mm)

003

396,00B1110/164002-040-76016404,00B201210/165002-050-76016525,00B1510/166502-065-76016530,00B141910/168002-080-76016611,00B122510/1610002-100-76016995,00B93310/1612502-125-76016

1.010,00B84910/1615002-150-760161.785,00B6701020002-200-760062.512,00B41101025002-250-760062.596,00B41101625002-250-760163.622,00B21601030002-300-760066.926,00B23201035002-350-76006 #)7.166,00B23201035002-350-76016 #)8.608,00B23421040002-400-760068.883,00B23421640002-400-76016

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/30

Flanged gate valve (std.)Face to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-400

003

198,00A361010/164006-040-30014208,00A361110/165006-050-30014290,00A303110/166506-065-30014290,00A201810/168006-080-30014310,00A201810/168006-080-30034342,00A202310/1610006-100-30014588,00A153110/1612506-125-30014588,00A104610/1615006-150-30014

1.024,00A10651020006-200-300041.076,00A10651620006-200-300141.606,00A81021025006-250-300041.686,00A81021625006-250-30014

61491030006-300-300032.244,00A61491030006-300-300042.356,00A61491630006-300-300144.826,00A22031035006-350-300065.066,00A22031635006-350-300164.826,00B22031035006-350-301065.066,00B22031635006-350-301166.508,00A12151040006-400-300066.834,00A12151640006-400-30016

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/30

Flanged gate valve (std.)Face to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTODN 50-400

Note:# Approved acc. to NF

004

208,00B361310/165006-050-30116290,00A301410/166506-065-30114290,00A201810/168006-080-30114342,00A202310/1610006-100-30114588,00B153110/1612506-125-30114633,00B153110/1612506-125-301160010 #)588,00A104610/1615006-150-30114

1.024,00A10651020006-200-301041.076,00B10651620006-200-301141.606,00B81021025006-250-301062.244,00B61491030006-300-301046.508,00B12401040006-400-301066.834,00B12401640006-400-30116

Gate valves


DIN

4 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/30

Flanged gate valve (std.)Face to face DIN F4Ductile ironEPDM rubber wedge withDVGW W 270 approvalStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 50-400

009

219,00A361110/165006-050-30017307,00A303110/166506-065-30017307,00A201810/168006-080-30017361,00A202310/1610006-100-30017625,00A153110/1612506-125-30017625,00A104610/1615006-150-30017

1.081,00A10651020006-200-300071.133,00A10651620006-200-300171.695,00A81021025006-250-300071.775,00A81021625006-250-300172.368,00A61491030006-300-300072.480,00A61491630006-300-300175.196,00B22031035006-350-300074.536,00B22031635006-350-300176.878,00B12131040006-400-30007

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/34

Flanged gate valveFace to face DIN F4Ductile ironAISI 316 stemEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-400

003

214,00B361010/164006-040-34016224,00B361110/165006-050-34016307,00B301410/166506-065-34016371,00B202310/1610006-100-34016650,00B104610/1615006-150-34016

1.161,00B10651020006-200-340061.213,00B10651620006-200-340161.771,00B81021025006-250-340061.851,00B81021625006-250-340162.419,00B61491030006-300-340062.579,00B61491630006-300-340165.049,00B22031035006-350-340065.289,00B22031635006-350-340166.731,00B12151040006-400-340067.057,00B12151640006-400-34016

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/35

Flanged gate valve withPin IndicatorFace to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 and GSKguide linesClosing direction: CTCDN 200-300


003

1.347,00A10711020006-200-350062.112,00A81021025006-250-350062.951,00A61491030006-300-350066.626,00B201630006-350-35006 #)6.866,00B201630006-350-35016 #)

Gate valves


DIN

5 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/35

Flanged gate valve withPin IndicatorFace to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 and GSKguide linesClosing direction: CTODN 50-300

004

283,00A301310/165006-050-35016365,00B1610/166506-065-35016380,00A202010/168006-080-35016482,00A202710/1610006-100-35016764,00A153610/1612506-125-35016764,00A10511615006-150-35016

1.399,00A10711620006-200-350162.192,00B81131625006-250-350163.063,00B61601630006-300-35016

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/75

Flanged gate valveFace to face DIN F4Ductile ironExchangeable stemsealingNF approvedEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 50-400

003

248,00B361210/165006-050-75016345,00B301410/166506-065-75016350,00B201910/168006-080-75016409,00B202510/1610006-100-75016698,00B153310/1612506-125-75016713,00B104610/1615006-150-75016

1.249,00B10651020006-200-750061.906,00B81021025006-250-750062.644,00B61491030006-300-750065.826,00B22031630006-350-750067.508,00B12131640006-400-75006

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/75

Flanged gate valveFace to face DIN F4Ductile ironExchangeable stemsealingNF approvedEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTODN 50-300


004

248,00B361210/165006-050-75116345,00B301410/166506-065-75116350,00B201910/168006-080-75116409,00B202510/1610006-100-75116698,00B153310/1612506-125-75116 #)713,00B104610/1615006-150-75116 #)

1.249,00B10651020006-200-75106 #)1.906,00B81021025006-250-75106 #)2.644,00B61491030006-300-75106 #)

Gate valves


DIN

6 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/75

Flanged gate valveFace to face DIN F4Ductile ironExchangeable stemsealingNF approvedEPDM rubber wedgeStandard flange drilling toDIN1882Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 65-80

015

364,00B30146506-075-75096370,00B198006-080-75036

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/85

Flanged gate valveFace to face DIN F4Ductile ironRG5 stem nutEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 50-200

003

268,00B361210/165006-050-8501605365,00B301410/166506-065-8501405372,00B201810/168006-080-8501405431,00B202310/1610006-100-8501405720,00B153310/1612506-125-8501405743,00B104610/1615006-150-8501405

1.338,00B10651620006-200-8501405

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 15/42

Flanged gate valveprepared for actuatorFace to face DIN F4Actuator on requestEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-300

003

984,00A361310/164015-040-40016984,00A361410/165015-050-40016984,00A301710/166515-065-42016984,00A202110/168015-080-42016

1.070,00A202410/1610015-100-420161.376,00A153410/1612515-125-400161.376,00A104910/1615015-150-420161.684,00A10681020015-200-420061.736,00A10681620015-200-420162.840,00A81131025015-250-420062.920,00A81131625015-250-420163.367,00A61601030015-300-420063.479,00A61601630015-300-42016

Gate valves


DIN

7 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 15/72

Flanged gate valveprepared foractuatorFace to face DIN F5Actuator on requestEPDM rubber wedgeStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 40-500


003

984,00B361410/164015-040-70016984,00B201410/165015-050-70016984,00B171810/166515-065-72016984,00B142110/168015-080-72016

1.070,00B202410/1610015-100-720161.376,00B84910/1615015-150-720161.684,00B6681020015-200-720061.738,00B6681620015-200-720162.840,00B41131025015-250-720062.924,00B41131625015-250-720163.367,00B21601030015-300-720063.483,00B21601630015-300-720166.998,00B22961035015-350-72006 #)7.238,00B22961635015-350-72016 #)9.020,00B23531040015-400-720069.346,00B23531640015-400-720169.530,00B13721045015-450-72006 ##)9.881,00B13721645015-450-72016 ##)

10.786,00B14301050015-500-72006 ##)11.274,00B14301650015-500-72016 ##)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 20/30

Flanged gate valveFace to face DIN F5Ductile ironInternal enamelEPDM rubber wedgewith DVGW W 270approvalStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 40-400


003

287,00A241110/164020-040-30017295,00A201210/165020-050-30017402,00A171510/166520-065-30017426,00A141910/168020-080-30017508,00A122510/1610020-100-30017817,00A93310/1612520-125-30017867,00A84910/1615020-150-30017

1.517,00A6701020020-200-300071.571,00A6701620020-200-300172.351,00A41101025020-250-300072.435,00A41101625020-250-300173.271,00A21601030020-300-300073.387,00A21601630020-300-300176.696,00A23201035020-350-30007 #)6.936,00A23201635020-350-30017 #)8.378,00A23421040020-400-300078.704,00A23421640020-400-30017

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 20/35

Flanged gate valveFace to face DIN F5AISI 316 stemDuctile ironInternal enamelEPDM rubber wedgewith DVGW W 270approvalStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 50-400

003

311,00A201210/165020-050-35017419,00A171510/166520-065-35017454,00A141910/168020-080-35017537,00A122510/1610020-100-35017850,00A93310/1612520-125-35017929,00A84910/1615020-150-35017

1.654,00A6701020020-200-350071.708,00A6701620020-200-350172.516,00A41101025020-250-350072.600,00A41101625020-250-350173.446,00A21691030020-300-350073.562,00A21601630020-300-350178.601,00A23301040020-400-350078.927,00A23301640020-400-35017

Gate valves


DIN

8 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 26/00

Flanged gate valveFace to face DIN F4Ductile ironEPDM rubber wedge withDVGW W 270 approvalStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 outside,enamelled to DEV insideClosing direction: CTCDN 40-300

009

268,00A361010/164026-040-00017278,00A361110/165026-050-00017377,00A301410/166526-065-00017400,00A201810/168026-080-00017477,00A202310/1610026-100-00017763,00A153110/1612526-125-00017808,00A104610/1615026-150-00017

1.424,00A10651020026-200-000071.476,00A10651620026-200-000172.206,00A81021025026-250-000072.286,00A81021625026-250-000173.069,00A61491030026-300-000073.181,00A61491630026-300-00017

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 55/30

Flanged gate valveresilient seatedLong length F5EPDM rubber wedgeStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 andGSK guide linesClosing direction: CTCDN 450-600

Note:# With by-pass

003

10.500,00B16331045055-450-30006001 #)10.500,00B16331645055-450-30016001 #)13.183,00B16631650055-500-30006001 #)13.183,00B16631650055-500-30016001 #)16.866,00B18281060055-600-30006001 #)16.866,00B18281660055-600-30016001 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 55/30

Flanged gate valve resilientseatedLong length F5EPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 450-600

005

9.300,00B16331045055-450-300069.300,00B16331645055-450-30016

11.983,00A16631050055-500-3000611.983,00B16631650055-500-3001411.983,00A16631650055-500-3001615.666,00A18281060055-600-3000615.666,00B18281660055-600-3001415.666,00A18281660055-600-30016

Gate valves


DIN

9 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 55/35

Flanged gate valveresilient seated w.PowersaverLong length F5EPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 450-600

003

11.700,00B15851045055-450-3500614.383,00B16151050055-500-3500614.383,00B16151650055-500-3501618.066,00B17801060055-600-35006

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 55/35

Flanged gate valveresilient seated w.PowersaverLong length F5EPDM rubber wedgeStandard flange drillingto ISO 7005-2, EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 and GSKguide linesClosing direction: CTCDN 500-600

Note:# With by-pass

005

15.583,00B16151650055-500-35016001 #)19.266,00B17801060055-600-35006001 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 55/35

Flanged gate valveresilient seated w.PowersaverLong length F5EPDM rubber wedgeStandard flange drillingto ISO 7005-2, EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 and GSKguide linesClosing direction: CTODN 450-500

Note:# With by-pass

006

10.556,00B15851645055-450-351160001 #)6151650055-500-351160001 #)

Gate valves


DIN

10 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 01/70

Socket gate valveSupa Plus tensilecouplings for UPVCDuctile ironEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 40-300

010

290,00A167164001-050-70016324,00A248165001-063-70016356,00A169166501-075-70016388,00A2013168001-090-70016483,00A12181610001-110-70016651,00A9241612501-125-70016661,00A9401612501-140-70016785,00A8561615001-160-70016

1.349,00A5581620001-200-700161.349,00A4801622501-225-700162.636,00A4951625001-250-700162.740,00A1231625001-280-700163.260,00A22461630001-315-70016

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 12/51

Exchange valveexcl. combi flangeEPDM rubberwedge with DVGWW 270 approvalStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 50-300

005

250,00A171210/165012-050-51017300,00A151710/166512-065-51017340,00A122110/168012-080-51017450,00A102710/1610012-100-51017700,00A83710/1612512-125-51017790,00A65310/1615012-150-51017

1.350,00A4771020012-200-510071.400,00A4771620012-200-510172.000,00A1201025012-250-510072.080,00A21201625012-250-510172.700,00A21741030012-300-510072.700,00A21741630012-300-51017

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 12/51

Exchange valveexcl. combi flangeEPDM rubberwedge with DVGWW 270 approvalStandard flangedrilling to DIN1882Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 80-100

015

363,00B122110/168012-080-51037480,00B102710/1610012-100-51037

Gate valves


DIN

11 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 32/10

Gate valve withspigot ends forasbestos cementpipes to ISO class18EPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 80-300

010

336,00B2016168032-080-10016438,00B12281610032-100-10016768,00B9471615032-150-10016

1.324,00B6861620032-200-10016B4941620032-225-10016

1.960,00B41231625032-250-100162.592,00B21941630032-300-10016

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 32/40

Gate valve withlong spigot endsfor cast ironpipes to ISO2531 class 18EPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosingdirection: CTCDN 80-300

010

370,00A201616988032-080-40016482,00A15241611810032-100-40016845,00A9451617015032-150-40016

1.456,00A6761622220032-200-400162.156,00A41211627425032-250-400162.851,00A21861632630032-300-40016

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 32/40

Gate valve withlong spigot endsfor cast ironpipes to ISO2531 class 18EPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 outside,enamelled toDEV insideClosing direction: CTCDN 100-200

020

617,00B15241611810032-100-40016701.065,00B9451617015032-150-40016701.856,00B6761622220032-200-4001670

Gate valves


DIN

12 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 32/60

Gate valve withspigot ends forasbestos cementpipes to ISO class18AISI 316 stem300 My coatingEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 80-450

Note:# With PowerSaver

010

A2016161068032-080-6001610559,00A12281612610032-100-6001610956,00A471617815032-150-6001610

1.698,00A6861623420032-200-6001610A41121625522532-225-6001610

2.478,00A1231628825032-250-60016103.258,00A1941634430032-300-6001610

A12651645640032-400-6001610A5701650845032-450-6001610 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 32/70

Gate valve withspigot ends for castiron pipes to ISO2531 class 18EPDM rubber wedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 50-300

003

240,00A24816665032-050-70016290,00A201116826532-065-70016336,00A201616988032-080-70016438,00A14241611810032-100-70016676,00A11321614412532-125-70016768,00A9451617015032-150-70016

1.324,00A6761622220032-200-700161.960,00A41101627425032-250-700162.592,00A21861632630032-300-70016

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 38/80

Gate valve withflange/PE-pipeDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesClosing direction: CTCDN 50-200

Note:# PE 100, PN 16 black/blue pipes,

DVGW/W270, PN 10 drilling

116

334,00A81116635038-063-80163 #)492,00A71616756538-075-80163 #)694,00A62116908038-090-80163 #)941,005271611010038-110-80163 #)

1.182,00A3361612512538-125-80163 #)1.254,00A3531616015038-160-80163 #)1.480,00A3561618015038-180-80163 #)2.859,00A2921622520038-225-80163 #)

Gate valves


DIN

13 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 36/80

Gate valve withPE-pipesDuctile ironEPDM rubber wedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 50-300


DVGW/W270

116

403,00A9710/16635036-063-80163417,00A101216756536-075-80163 #)510,00A52016908036-090-80163 #)598,00A5271611010036-110-80163 #)834,00A33910/1612512536-125-80163

1.148,00A3391612512536-140-80163 #)1.148,00A3521616015036-160-80163 #)1.296,00A3581618015036-180-80163 #)1.932,00A4881620020036-200-80163 #)2.260,00A2911622520036-225-80163 #)3.354,00A11261628025036-280-80163 #)5.422,00A11401631530036-315-80163 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 36/80

Gate valve withPE-pipesDuctile ironEPDM rubber wedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 65-300


DVGW/W270

126

417,00A1210756536-075-80263 #)510,00A2010758036-090-80263 #)598,00A271011010036-110-80263 #)

1.148,00A521016015036-160-80263 #)1.296,00A3521018015036-180-80263 #)1.932,00A881020020036-200-80263 #)2.260,00A2881022520036-225-80263 #)3.130,00A1181025025036-250-80263 #)5.422,00A1401031530036-315-80263 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 01/80

Socket gate valveEURO socket endsfor UPVCDuctile ironEPDM rubberwedge withAS4020 approvalEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 40-400

003

234,00A24816504001-050-80014276,00A24916635001-063-80014310,00A191116756501-075-80014314,00A171616908001-090-80014372,00A12281611010001-110-80014627,00A9321612512501-125-80014627,00A7471616015001-160-80014

1.036,00A6761620020001-200-800141.385,00A6861622520001-225-800141.938,00A41141625025001-250-800141.938,00B41141625025001-250-801162.007,00A41231628025001-280-800143.149,00A21941631530001-315-800145.380,00A12931640040001-400-80014

Gate valves


DIN

14 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 01/80

Socket gate valveEURO socket endsfor UPVCDuctile ironEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTODN 40-400

011

B24816504001-050-80116276,00B24916635001-063-80116310,00B191116756501-075-80116314,00B171616908001-090-80116372,00B12281611010001-110-80116627,00B7471616015001-160-80116

1.036,00B6761620020001-200-801163.149,00B21941631530001-315-80116

B2931640040001-400-80116

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 01/80

Socket gate valveEURO socket endsfor UPVCDuctile ironNBR rubber wedgewith DVGW KTWapprovalEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 40-300

012

234,00B24816504001-050-80013276,00B24916635001-063-80013310,00B19916756501-075-80013314,00B171616908001-090-80013372,00B12281611010001-110-80013627,00B9321612512501-125-80013627,00B7471616015001-160-80013

1.036,00B6761620020001-200-800131.036,00B4861622520001-225-800131.938,00B41101625025001-250-800133.149,00B21601631530001-315-80013

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 01/80

Socket gate valveEURO socket endsfor UPVCDuctile ironEPDM rubberwedge with DVGWW 270 approvalEpoxy coatedaccording to DIN30677-2 and GSKapprovedClosing direction:CTCDN 40-300

014

B24816504001-050-80017314,00B171616908001-090-80017

B12281611010001-110-80017627,00B9321612512501-125-80017627,00B7471616015001-160-80017

B6761620020001-200-800171.385,00B861622520001-225-800173.149,00B21231631530001-315-80017

Gate valves


DIN

15 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 33/00

Gate valve withsocket ends for castiron pipes to ISO2531EPDM rubberwedge with DVGWW 270 approvalEpoxy coatedaccording to DIN30677-2 outside,enamelled to DEVinsideClosing direction:CTCDN 80-200

011

430,00B16168033-080-0001770512,00B12211610033-100-0001770950,00B8401615033-150-0001770

1.424,00B6751620033-200-0001770

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN/DNmm

AVK ref. nos.Type

Series 18/40

Combi-Tee withflanged endsDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosingdirection: CTCDN 80-100

003

488,00A82410/1680-8018-080-40016520,00A82410/1680-10018-080-41016590,00A72610/16100-10018-100-40016721,00A62610/16100-15018-100-43016883,00A4310100-20018-100-44006

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 18/70

Combi-cross 4outlet flangedDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 100-300

Note:# With ball valve and DN 100 center outlet

003

2.717,00A211910/1610018-100-70011 #)3.754,00A120210/1615018-150-70011 #)6.413,00A13161020018-200-70001 #)6.571,00A13161620018-200-70011 #)6.734,00A15201025018-250-70006 #)6.818,00A15201625018-250-70016 #)

10.927,00A16901030018-300-70006 #)11.043,00A16901630018-300-70016 #)

Gate valves

Com

bi valves


DIN

16 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 18/70

Combi-cross 4outlet flangedDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTODN 100-300


004

2.717,00A211810/1610018-100-70111 #)3.754,00A120210/1615018-150-70111 #)6.413,00A13121020018-200-70101 #)

A6901030018-300-70106 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 18/70

Combi-cross 4outlet flangedDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 100-200

Note:# Without ball valve and DN 100 center outlet

005

2.289,00A211910/1610018-100-7001600210 #)3.222,00A120210/1615018-150-7001600210 #)5.985,00A13161020018-200-7000600210 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 18/80

Combi-cross 3outlet flangedDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 100-300


003

2.268,00A39210/1610018-100-80011 #)3.043,00A216210/1615018-150-80011 #)5.313,00A12391020018-200-80001 #)5.367,00A12391620018-200-80011 #)5.965,00A14501025018-250-80006 #)5.981,00A14501625018-250-80016 #)9.755,00A16901030018-300-80006 #)9.871,00A16201630018-300-80016 #)

Com

bi valves


DIN

17 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 18/80

Combi-cross 3outlet flangedDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTODN 100-300


004

2.268,00A39210/1610018-100-80111 #)3.043,00A216210/1615018-150-80111 #)5.313,00A12391020018-200-80101 #)

A4501025018-250-80106 #)A6901030018-300-80106 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 18/80

Combi-cross 3outlet flangedDuctile ironEPDM rubberwedgeStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 150-200

Note:# Without ball valve and DN 100 center outlet

005

2.644,00A216210/1615018-150-8001600210 #)4.914,00A12391020018-200-8000600210 #)

Gross priceEUR

Deliv.-code


DN/DNmm

AVK ref. nos.Type

Series 18/89

Extension piece for AVKcombi-crossEpoxy coated according to DIN30677-2 and GSK guide linesDN 150-200

001

52,00A2100-15018-150-8900059,00A2200-20018-200-89000

Com

bi valves


DIN

18 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code


DN mm

AVK ref. nos.Type

Series 18/93

Ball valve forAVKcombi-crossDN 20

001

107,00A12018-150-27

Gross priceEUR

Deliv.-code

Units pr.pallet


Hmm

AVK ref. nos.Type

Series 04/10

Surface boxFixed street coverGrey cast ironDistance ring and squarein ductile ironEpoxy coated accordingto DIN 30677-2 and GSKguide lines

Note:# Surface box body## Lid "VAND -

AVK"### Lid "GAS - AVK"#### Lid "Water - AVK"##### Distance ring

001

45,00A100519004-000-5100 #)24,00A1002004-000-5200 ##)26,00A1002004-000-6600 ###)24,00A1002004-000-6900 ####)9,00A10011004-001-5300 #####)

10,00A100012004-001-5400 #####)13,00A10013004-001-5500 #####)18,00A100014004-001-5600 #####)22,00B100025004-001-5700 #####)

Gross priceEUR

Deliv.-code

Units pr.pallet


Hmm

AVK ref. nos.Type

Series 04/11

Surface boxFloating streetcoverDuctile iron

Note:# Surface box

body## Lid "VAND -

AVK"

001

65,00A100413004-000-6000/5200 #)91,00A50615004-002-6000/6200 #)70,00A504004-002-6200 ##)

Gross priceEUR

Deliv.-code

Units pr.pallet

Hmm

AVK ref. nos.Type

Series 04/12

Surface boxUniversal streetcover for AVKtelescopic ext.spindleDuctile iron

Note:# Complete

surface boxinscription lid"VAND"(without

## Distance ring

001

119,00A1422404-003-51000 #)9,00A200004-003-5300 ##)

Com

bi valvesA

ccessories


DIN

19 2007-07-10 10:47 CET


DN/DNmm

AVK ref. nos.Type

Series 04/20

Stem cap forextension spindlesEpoxy coatedaccording to DIN30677-2 and GSKguide linesDN 150-400

001

025-15004-160-17001200-40004-400-1700

Gross priceEUR

Deliv.-code


DN/DNmm

AVK ref. nos.Type

Series 04/22

Stem cap forvalvesEpoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-400

001

7,00A040-5008-040-6100010,00A165-8008-065-6100011,00A1100-15008-100-6100016,00A1200-20008-200-6100016,00A1250-30008-250-6100018,00A2350-50008-400-61000

Gross priceEUR

Deliv.-code


DN/DNmm

AVK ref. nos.Type

Series 04/23

Stem cap for valvesEpoxy coated according toDIN 30677-2 and GSK guidelinesDN 40

001

15,00A025-5004-032-210015,00A140-5004-000-1000

Gross priceEUR

Deliv.-code

Units pr.pallet

PC1mm

DN/DNmm

AVK ref. nos.Type

Series 04/05

Stem extension for service connectionvalvesFixed lengthKey adaptor #14-22PC1 = Pipe cover

001

50,00A4880025-5004-032-1500150,00A65100025-5004-032-1550150,00A65100025-5004-032-1600166,00A60150025-5004-032-1650166,00A48200025-5004-032-1750182,00A48300025-5004-032-18001

Accessories


DIN

20 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet

L8mm

DN/DNmm

AVK ref. nos.Type

Series 04/07

Stem extension for service connectionvalvesTelescopicKey adaptor #14-22L8 = Actual length

001

48,00A48450-70025-5004-032-2000173,00A72650-110025-5004-032-2050180,00A481050-175025-5004-032-2100186,00A1400-235025-5004-032-2120191,00A551700-290025-5004-032-21501

Gross priceEUR


AVK ref. nos.Type

Series 04/15

T-key for extensionspindlesEpoxy coated according toDIN 30677-2 and GSKguide lines

001

175,00204-050-2000175,00204-050-2100

Gross priceEUR

Deliv.-code

Units pr.pallet


Dmm

DN mm

AVK ref. nos.Type

Series 08/00

HandwheelEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosingdirection: CTCDN 50-400

Note:# For gate valves series 21, 37 & 54

001

26,00A30021805008-050-0100032,00A28522258008-080-0200038,00A187428010008-100-010000000 #)42,00A119532015008-150-0200056,00A90632020008-200-0100086,00A241150025008-250-02000

146,00A181764040008-400-01000

Gross priceEUR

Deliv.-code

Units pr.pallet

PC1mm

DN/DNmm

AVK ref. nos.Type

Series 04/02

Stem extension for gate valvesFixed lengthKey adaptor #23-32PC1 = Pipe cover

001

57,00A4280040-5004-050-3500258,00A65100040-5004-050-3550263,00A65125040-5004-050-3600274,00A60150040-5004-050-3650293,00A60200040-5004-050-37502

128,00A300040-5004-050-3800257,00A6580065-8004-080-3500258,00A65100065-8004-080-3550263,00A42125065-8004-080-3600274,00A60150065-8004-080-3650293,00A60200065-8004-080-37502

128,00A300065-8004-080-3800257,00A80800100-12504-125-3500258,00A651000100-12504-125-3550263,00A651250100-12504-125-3600274,00A601500100-12504-125-36502

Accessories


DIN

21 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet

PC1mm

DN/DNmm

AVK ref. nos.Type

Series 04/02

Stem extension for gate valvesFixed lengthKey adaptor #23-32PC1 = Pipe cover

001

93,00A602000100-12504-125-37502128,00A283000100-12504-125-3800257,00A80800150-15004-150-3500258,00A601000150-15004-150-3550263,00A521250150-15004-150-3600274,00A481500150-15004-150-3650293,00A202000150-15004-150-37502

128,00B3000150-15004-150-3800259,00A20800200-20004-200-3500269,00A511000200-20004-200-3550293,00A361250200-20004-200-3600293,00A201500200-20004-200-36502

127,00A332000200-20004-200-37502187,00A103000200-20004-200-3800259,00A34800250-30004-300-3500269,00A341000250-30004-300-3550293,00A331250250-30004-300-3600293,00A201500250-30004-300-36502

127,00A332000250-30004-300-37502187,00A103000250-30004-300-3800293,00A261250350-40004-400-3600293,00A201500350-40004-400-36502

127,00B2000350-40004-400-37502187,00A3000350-40004-400-38002

Gross priceEUR

Deliv.-code

Units pr.pallet

L8mm

DN/DNmm

AVK ref. nos.Type

Series 04/04

Stem extension for gate valvesTelescopicKey adaptor #23-32L8 = Actual length

001

74,00A42450-70040-5004-050-4000290,00A42650-110040-5004-050-40502

104,00A421050-175040-5004-050-41002131,00A421400-235040-5004-050-41202157,00A421700-290040-5004-050-4150274,00A55450-70040-5004-080-4000290,00A55650-110065-8004-080-40502

104,00A551050-175065-8004-080-41002131,00A551400-235065-8004-080-41202157,00A551700-290065-8004-080-4150274,00A72450-700100-12504-125-4000290,00A48650-1100100-12504-125-40502

104,00A441050-1750100-12504-125-41002131,00A551400-2350100-12504-125-41202157,00A551700-2900100-12504-125-4150274,00A72450-700150-15004-150-4000290,00A44650-1100150-15004-150-40502

104,00A441050-1750150-15004-150-41002131,00A551400-2350150-15004-150-41202157,00A441700-2900150-15004-150-4150289,00A51450-700200-20004-200-40002

109,00A33650-1100200-20004-200-40502137,00A301050-1750200-20004-200-41002164,00B551400-2350200-20004-200-41202190,00A401700-2900200-20004-200-4150289,00A42450-700250-30004-300-40002

109,00A22650-1100250-30004-300-40502137,00A301050-1750250-30004-300-41002164,00A551400-2350250-30004-300-41202190,00A301700-2900250-30004-300-4150289,00A13450-700350-40004-400-40002

109,00A20650-1100350-40004-400-40502137,00A301050-1750350-40004-400-41002164,00B551400-2350350-40004-400-41202190,00A101700-2900350-40004-400-41502

Accessories


DIN

22 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 03/85

Service conn. valvewith tensile resistantsocketconnection/outsidethreadEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 25-32

Note:# 1 1/4" outside thread## 1" outside thread

005

188,00A70316322503-032-83001 #)162,00A70316322503-032-85001 ##)194,00B77316403203-040-84001 ##)204,00A71316403203-040-85001 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 03/65

Service connectionvalveTensile resistantscrew couplings forPE-pipesDuctile ironEPDM rubber wedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 25-50

005

170,00A70316322503-032-65001187,00A64416403203-040-65001258,00A41616504003-050-65001340,00A36716635003-063-65001

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 16/00

Brass serviceconnection valvewith T-top andbrass tensilecouplingsEPDM rubberwedgeClosingdirection: CTCDN 25-50

010

245,00A216322516-032-00056265,00A316403216-040-00056345,00A316504016-050-00056410,00A416635016-063-00056

Serviceconn. valves


DIN

23 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 16/05

Brass serviceconnection valvewith AVK top andtensile couplingsEPDM rubberwedgeClosing direction:CTCDN 25-40

010

220,00A70216322516-032-05006240,00A64316403216-040-05006330,00A316504016-050-05006

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 11/30

Angle serviceconnection valve w.external thread/tensileresistant socket jointEPDM rubber wedgeEpoxy coated accordingto DIN 30677-2 andGSK guide linesClosing direction: CTCDN 25-50

Note:# 1 1/4" outside

thread## 2" outside thread

010

135,00A80316322511-032-30006 #)138,00B80316322511-032-30056 #)160,00A416403211-040-30006 ##)190,00A616504011-050-30006 ##)240,00A42716635011-063-30006 ##)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 16/29

Serviceconnection valvewith socketjoints/BSPthreadPOMEPDM rubberwedgeClosingdirection: CTCDN 25-50

Note:# 1 1/2"

outsidethread

## 2" outside thread

010

170,00B116322516-032-290603006 #)212,00B20216403216-040-290704006 ##)235,00B216504016-050-290804006 ##)259,00B416635016-063-290904006 ##)

Serviceconn. valves


DIN

24 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 16/80

Serviceconnection valvewith PE-pipesPOMEPDM rubberwedgeClosingdirection: CTCDN 25-50

Note:# Pipe 200/200 mm, PE 80

010

241,00A24110322516-032-80026 #)261,00A20110403216-040-80026 #)368,00A13310504016-050-80026 #)463,00A11510635016-063-80026 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 03/00

Service connectionvalveInternal threadDuctile ironEPDM rubber wedgeEpoxy coated accordingto DIN 30677-2 andGSK guide linesClosing direction: CTCDN 20-50

Note:# 3/4" inside

thread## 1" inside thread### 1 1/4" inside thread#### 1 1/2" inside thread##### 2" inside thread

010

113,00A96316252003-025-00001 #)123,00A96316322503-032-00001 ##)146,00A80316403203-040-00001 ###)160,00A55516504003-050-00001 ####)218,00A48516635003-063-00001 #####)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 03/10

Service connectionvalveInternal threadDuctile ironEPDM rubber wedgeEpoxy coated accordingto DIN 30677-2 outside,enamelled to DEVinsideClosing direction: CTCDN 25-50

Note:# 1" inside thread## 1 1/4" inside thread### 1 1/2" inside thread#### 2" inside thread

010

163,00A96316322503-032-10001 #)186,00A80316403203-040-10001 ##)202,00A60516504003-050-10001 ###)306,00A48616635003-063-10001 ####)

Serviceconn. valves


DIN

25 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 03/40/60

Serviceconnection valvefor sidetappingExt./int. threadand tensilesocket jointGrey cast ironEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 25-50

005

141,00A58416322503-032-4000180,00A48416403203-040-4000160,00A60416403203-040-6000220,00A32716504003-050-4000268,00B28816635003-063-4000250,00A28816635003-063-6000

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 03/30

Serviceconnection valvePush in socketsfor PE-pipesDuctile ironEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosingdirection: CTCDN 20-50

005

129,00A80316252003-025-3000135,00A64416322503-032-3000160,00A58416403203-040-3000190,00A32716504003-050-3000240,00A25916635003-063-3000

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 16/50

Serviceconnection valvewith tensileresistant socketjointsPOMEPDM rubberwedgeClosing direction:CTCDN 25-50

010

160,00A55116322516-032-50006168,00A45116403216-040-50006220,00A28216504016-050-50006252,00A20516635016-063-50006

Serviceconn. valves


DIN

26 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 03/90

Service connectionvalve with PRKsystem forPE-pipesDuctile ironEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 20-50

005

157,00A64316252003-025-9000160,00A64316322503-032-9000177,00A58316403203-040-9000248,00A41716504003-050-9000300,00A32616635003-063-9000

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 03/93

Service connectionvalve with PRKsystem forPE-pipesDuctile ironEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 outside,enamelled to DEVinsideClosing direction:CTCDN 20-50

005

197,00B80316252003-025-93001192,00A80316322503-032-93001221,00A60316403203-040-93001300,00A50516504003-050-93001368,00A40616635003-063-93001

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 16/20

Brass serviceconnection valvewith T-top andPRK couplingsClosingdirection: CTCDN 25-50

010

220,00A216322516-032-20056240,00A316403216-040-20056330,00A316504016-050-20056365,00A416635016-063-32056

Serviceconn. valves


DIN

27 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 16/25

Brass serviceconnection valvewithPRK-couplingsEPDM rubberwedgeClosing direction:CTCDN 20-50

010

B216252016-025-25006190,00A216322516-032-25006220,00A316403216-040-25006311,00A316504016-050-25006350,00A416635016-063-25006

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 16/90

Serviceconnection valvewithPRK-couplingsPOMEPDM rubberwedgeClosingdirection: CTCDN 25-50

010

253,00A50116322516-032-90006282,00A42116403216-040-90006337,00A28316504016-050-90006375,00A20416635016-063-90006

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 16/01

Serviceconnection valvePRK/externalconical pipethreadPOMEPDM rubberwedgeClosingdirection: CTCDN 32-40

Note:# 1 1/2"

outsidethread

## 2" outside thread

010

265,00A20216403216-040-010303006 #)319,00B20216403216-040-010304006 ##)351,00A316504016-050-010404006 ##)

Serviceconn. valves


DIN

28 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Ddmm

DN mm

AVK ref. nos.Type

Series 11/00

Angle service connectionvalveExternal/internal threadDuctile ironEPDM rubber wedgeEpoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 25-50

010

123,00A80316322511-032-00006146,00A416403211-040-00006160,00A516504011-050-00006218,00A48616635011-063-00006

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 701/10

Automatic air valveSingle actingDN 25

Note:# 1" BSP thread

010

179,00A01625701-032-1099 #)247,00A11625701-032-1199 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 701/20

Automatic air valveSingle actingDN 25


010

303,00A41625701-032-2091 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 701/30

Single acting airvalveInlet flangeStandard flangedrilling to ISO7005-2, EN1092-2: 1997DN 50-150


010

565,00A181650701-050-3011514,00A91650701-051-3091 #)928,00A181680701-080-3011

1.446,00A2716100701-100-30114.012,00A7716150701-150-3011

Serviceconn. valves

Air valves


DIN

29 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 701/40

Combination airvalveDouble actingDN 25-50

Note:# 1" BSP thread## 2" BSP thread

010

245,00A11625701-025-4099 #)467,00A11650701-050-4099 ##)578,00A21650701-050-4199 ##)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 701/50

Combination airvalveDouble actingStandard flangedrilling to ISO7005-2, EN1092-2: 1997DN 50-200


003

711,00A121650701-050-5011711,00A91650701-051-5091 #)

1.066,00A181680701-080-50111.614,00A2616100701-100-50114.169,00A7816150701-150-50114.897,00A8610200701-200-5001

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 701/60

Combination air valveDouble actingStandard flange drillingto ISO 7005-2, EN1092-2: 1997DN 50-200


010

756,00A131650701-050-6011756,00A101650701-051-6091 #)

1.148,00A191680701-080-60111.659,00A2716100701-100-60114.367,00A7916150701-150-60115.015,00A8716200701-200-6011

Gross priceEUR

Deliv.-code

Units pr.pallet


H3mm

PN bar

DN mm

AVK ref. nos.Type

Series 701/84

Underground air valve installationsystemDN 50

002

2.465,00B97551650701-050-84122.558,00B1010551650701-050-8413

Air valves


DIN

30 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


H3mm

PN bar

DN mm

AVK ref. nos.Type

Series 701/84

Underground air valve installationsystemDN 80

003

2.619,00B1110551680701-080-8423

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 29/40

Underground firehydrant to EN1074-6PN 16EPDM rubberwedgeStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 100

Note:# With bayonet coupling## With 3" stortz coupling### With 3" NOR coupling#### With 4" stortz coupling

003

713,00A221610029-100-400101 #)1.058,00A211610029-100-400102 ##)1.428,00A211610029-100-400103 ###)1.964,00A211610029-100-400104 ####)

Gross priceEUR

Deliv.-code

Units pr.pallet


DN mm

AVK ref. nos.Type

Series 09/20

Fire hydrantAbove groundStortz-Hose-couplingType BAluminiumStandard flange drilling to ISO7005-2, EN1092-2: 1997Epoxy coated according to DIN30677-2 and GSK guide linesDN 80

Note:# Automatic drainage## Manual drainage

001

2.500,00A5608009-080-201021 #)2.700,00A5608009-080-203021 ##)

Air valves

Undergroundhydrants

Above

ground hydrants


DIN

31 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


DN mm

AVK ref. nos.Type

Series 09/30

Fire hydrantAbove groundStortz-Hose-couplingType BDuctile ironStandard flange drilling to ISO7005-2, EN1092-2: 1997Epoxy coated according to DIN30677-2 and GSK guide linesDN 80

Note:# Automatic drainage## Manual drainage

001

2.600,00A5658009-080-301027 #)2.800,00A5658009-080-303027 ##)

Gross priceEUR

Deliv.-code

Units pr.pallet


DN mm

AVK ref. nos.Type

Series 09/50

Fire hydrantAbove groundManual drainageType AAluminiumStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesDN 100

001

3.600,00A68310009-100-5030

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 84/70

Fire hydrant DN 80above groundStainless steelModel P6PN 16Polyurethan vulcanized plugStandard flange drilling toISO 7005-2, EN 1092-2:1997Epoxy coated according toDIN 30677-2 and GSK guidelinesClosing direction: CTCDN 80

001

1.558,00B688084-080-70311011051.565,00B788084-080-7041101105

Above

ground hydrants


DIN

32 2007-07-10 10:47 CET

2007-01-01


Hyd

rants

Type AVK ref. nos. DN PN Weight Units Deliv.- Gross price mm bar kg pr. pallet code Euro

Series 35/40

Underground fire hydrant, PN 16DN 80750-1000 mm

Series 35/60

Underground fire hydrant, to DIN 3221-AD1-80PN 16DN 80800-1500 mmDIN - DVGW approved

Pipe cover mm 35-080-40-11001 80 750 16 24.5 B 674 35-080-40-21001 80 1000 16 29.5 B 738

Pipe cover mm 35-080-50-11001 80 750 16 24.5 B 674 35-080-50-21001 80 1000 16 29.5 B 738

Pipe coverFlange connection - Epoxy coating mm35-080-6011002 80 800 16 34.5 B 86935-080-6021002 80 1000 16 37.5 B 93535-080-6031002 80 1250 16 42.5 B 1,01035-080-6041002 80 1500 16 48.5 B 1,214

Flange connection - Enamelled internally35-080-601100270 80 800 16 34.5 B 88635-080-602100270 80 1000 16 37.5 B 95435-080-603100270 80 1250 16 42.5 B 1,03035-080-604100270 80 1500 16 48.5 B 1,238

Bayo connection - Epoxy coating35-080-6019002 80 800 16 32.0 B 1,19535-080-6029002 80 1000 16 35.0 B 1,21435-080-6039002 80 1250 16 40.0 B 1,29235-080-6049002 80 1500 16 46.0 B 1,483

Bayo connection - Enamelled internally35-080-601900270 80 800 16 32.0 B 1,21935-080-602900270 80 1000 16 35.0 B 1,23835-080-603900270 80 1250 16 40.0 B 1,31835-080-604900270 80 1500 16 46.0 B 1,514

35-000-99 B 33Series 35/99

Flex drain for underground fire hydrant AVK series 35/40, 35/50 and 35/60

Series 35/50

Underground fire hydrant, to KIWA BRL-K614/01 and BRL-K649/01with non-return devicePN 16DN 80750-1000 mm

Options:- Alternative drilling to DIN 1882- Alternative cover (self-closing cover or plastic cover)

DIN

2007-01-01

Hyd

rants


Type AVK ref. nos. Pipe cover Gross price mm Coating Euro

Series 84/20-22

Post hydrants in break-away design with additional ball shut-offModel P5 red, with drop jacket, white - red - white,DIN 3222 AFUD 100-16, DN 100 mm, DIN-DVGW-Reg.-Nr. NW-6411 AU 2085

DN Outlet side center AFUD 100 84-100-20-211013 100 2 x B 1 x A 1000 Email/EKB red 2,69284-100-20-311013 100 2 x B 1 x A 1250 Email/EKB red 2,76584-100-20-411013 100 2 x B 1 x A 1500 Email/EKB red 2,794

AFUD 100 84-100-22-211013 100 2 x B 1000 Email/EKB red 2,69284-100-22-311013 100 2 x B 1250 Email/EKB red 2,76584-100-22-411013 100 2 x B 1500 Email/EKB red 2,794

DN Outlet Side center AUD 80 84-080-00-211010 80 2 x B 1000 Email/EKB red 1,557 84-080-00-311010 80 2 x B 1250 Email/EKB red 1,624 84-080-00-411010 80 2 x B 1500 Email/EKB red 1,671

84-080-00-211060 80 2 x B 1000 Email/Email blue 1,61084-080-00-311060 80 2 x B 1250 Email/Email blue 1,68284-080-00-411060 80 2 x B 1500 Email/Email blue 1,729

AUD 100 84-100-10-211010 100 2 x B 1 x A 1000 Email/EKB red 1,894 84-100-10-311010 100 2 x B 1 x A 1250 Email/EKB red 1,959 84-100-10-411010 100 2 x B 1 x A 1500 Email/EKB red 1,987

84-100-10-211060 100 2 x B 1 x A 1000 Email/Email blue 1,96684-100-10-311060 100 2 x B 1 x A 1250 Email/Email blue 2,02984-100-10-411060 100 2 x B 1 x A 1500 Email/Email blue 2,059

AUD 100 84-100-12-211010 100 2 x B 1000 Email/EKB red 1,894 84-100-12-311010 100 2 x B 1250 Email/EKB red 1,959 84-100-12-411010 100 2 x B 1500 Email/EKB red 1,987 100 2 x B 1000 Email/Email blue 1,966 100 2 x B 1250 Email/Email blue 2,029 100 2 x B 1500 Email/Email blue 2,059

Series 84/00-10-12

Post hydrants in break-away design with additional ball shut-offModel P5, red, without drop jacket, DIN 3222 AUD 80/100 - 16, DN 80/100 mm,DIN-DVGW-Reg.-Nr.: NW-6411 AS 2286, NW-6411 AS 2287

DIN

2007-01-01

Hyd

rants


DIN

Type AVK ref. nos. Pipe cover Gross price mm Coating Euro

DN Outlet side center AUD 80 84-080-40-211011 80 2 x B - 1000 Email/EKB red 1,55784-080-40-311011 80 2 x B - 1250 Email/EKB red 1,624 84-080-40-411011 80 2 x B - 1500 Email/EKB red 1,671

84-080-40-211061 80 2 x B - 1000 Email/Email blue 1,61084-080-40-311061 80 2 x B - 1250 Email/Email blue 1,68284-080-40-411061 80 2 x B - 1500 Email/Email blue 1,729

AUD 100 84-100-50-211011 100 2 x B 1 x A 1000 Email/EKB red 1,894 84-100-50-311011 100 2 x B 1 x A 1250 Email/EKB red 1,959 84-100-50-411011 100 2 x B 1 x A 1500 Email/EKB red 1,987

84-100-50-211061 100 2 x B 1 x A 1000 Email/Email blue 1,96684-100-50-311061 100 2 x B 1 x A 1250 Email/Email blue 2,02984-100-50-411061 100 2 x B 1 x A 1500 Email/Email blue 2,059

Series 84/40-50

Post hydrants in break-away design with additional ball shut-offModel P5 - ”NOSTALGIA”, DIN 3222 AUD 80/100 - 16, DN 80/100 mm, DIN-DVGW-Reg.-Nr. NW 6411 BM 0125

2007-01-01

Hyd

rants

Products for water according to DIN / NF Price list 2007

Type AVK ref. nos. DN H Weight Deliv.- Gross price mm mm kg code Euro

Series 78/7111

Pillar Fire hydrant “VEGA-STOP”GGG-503 outletsFrostproofAutomatic drain

Série 78/7112

“VEGA-REC”

78-080-7106-100 80 100 84.0 C 96178-100-7106-100 100 100 95.0 C 1,00978-150-7106-100 150 100 140.0 C 2,235

78-100-7106-125 100 125 127.0 C 1,197

78-080-7111-100 80 100 92.0 C 1,130 78-100-7111-100 100 100 112.0 C 1,178 78-100-7111-125 100 125 127.0 C 1,366

VEGA-REC 78-100-7112-100 100 100 105.0 C 1,178

78-080-7120-100 80 100 100.0 C 1,322 78-100-7120-100 100 100 111.0 C 1,393 78-100-7120-125 100 125 137.0 C 1,581

78-080-7121-100 80 100 107.0 C 1,491 78-100-7121-100 100 100 118.0 C 1,540

78-100-7122-100 100 100 130.0 C 1,540

78-709-00429 Operating key 1.5 C 27

78-000-7915-000 Metallic cover 18.0 C 384

78-KITSECURIT Repair kit, (breakable flange) 5.0 C 114

PHENIX:

78-100-7135-100 100 100 143.0 C 1,273

PHENIX-REC: 78-100-7145-100 100 100 151.0 C 1,486

Series 78/7120Pillar fire hydrant “ORION” with metalic cover

Série 78/7121“ORION-STOP”

Série 78/7122“ORION-REC”

Accessories

Used for all hydrants

DIN

/ NF

Series 78/7106

Pillar Fire hydrant “VEGA”DN 80-100: GGG-50DN 150: GG-253 outletsFrostproofAutomatic drain

Series 78/7135

Pillar fire hydrant “PHENIX” GG-253 outletsFrostproofAutomatic drain

Série 78/7145

“PHENIX-REC”

2007-01-01

Hyd

rants

Products for water according to DIN / NF Price list 2007

Type AVK ref. nos. DN H Weight Deliv.- Gross price mm mm kg code Euro

Series 78/75XX

Fountain postVICTORIAGG-25Automatic drain on frostproof models

Series 78/741X

Sprinkling hydrantLICORNEGG-25FrostproofAutomatic drain

Series 78/742X

Sprinkling hydrantLYREGG-25

Series 78/7310

Underground fire and sprinkling hydrantDELPHINEGG-25

Series 78/7305

Underground fire and sprinkling hydrantDAUPHINEGG-25FrostproofAutomatic drain

Without outlet:78-040-7510-100 40 100 100.0 C 1,479

With outlet: 78-040-7511-100 40 100 100.0 C 1,719

Garden Fountain: 78-020-7520-000 25 62.0 C 1,098

78-040-7305-080 40 Sym. 29.0 C 37878-080-7305-100 80 Sym. 87.0 C 79378-100-7305-000 100 Sym. 99.0 C 92578-100-7305-100 100 Keyser 99.0 C 925

78-040-7310-000 40 Sym. 16.0 C 26578-080-7310-000 80 Sym. 50.0 C 56978-100-7310-100 100 Sym. 71.0 C 79978-100-7310-000 100 Keyser 71.0 C 799

With stem cap:78-025-7410-060 25 10.0 C 212

With handwheel: 78-025-7411-060 25 10.0 C 212

With stem cap:78-025-7420-000 25 5.5 C 143

With handwheel: 78-025-7421-000 25 5.5 C 143

DIN

/ NF

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 41/60

Swing checkvalve with freeshaft endEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300

003

662,00A181310/165041-050-60018742,00A151510/166541-065-60018

1.000,00A92410/1610041-100-600181.261,00A83810/1612541-125-600181.617,00A84610/1615041-150-600182.571,00A5781020041-200-600082.625,00B5781620041-200-600185.069,00A11831025041-250-600085.153,00B11831625041-250-600185.992,00A12311030041-300-600086.108,00B12311630041-300-60018

Gross priceEUR

Deliv.-code

DN/DNmm

DN mm

AVK ref. nos.Type

Series 41/23

Swing checkvalve lever andweight kitEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 100-300

001

111,00A100-10010041-100-23000155,00A125-15015041-150-23000155,00A200-20020041-200-23000448,00A250-30030041-300-23000

Gross priceEUR

Deliv.-code


DN mm

AVK ref. nos.Type

Series 41/32

Swing checkvalve spring kitEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300

001

481,00A15041-050-32000483,00A16541-065-32000111,00A38041-080-230000000463,00A18041-080-32000478,00A110041-100-32000523,00A112541-125-32000523,00A115041-150-32000527,00A220041-200-32000

1.596,00A330041-300-32000

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 10/00

Tapping saddlefor PVC andPE-pipesMetric sizeEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300

Note:# 3/4" BSP thread

001

56,00A114116505010-050-40011 #)66,00A75216635010-063-40011 #)74,00A70216756510-075-40011 #)76,00A63316908010-090-40011 #)79,00A5631611010010-110-40011 #)80,00A4541612512510-125-40011 #)91,00A4051614012510-140-40011 #)

100,00A3361616015010-160-40011 #)180,00A71618015010-180-40011 #)160,00A12101620020010-200-40011 #)180,00A10101622520010-225-40011 #)207,00A1101625025010-250-40011 #)206,00A141628025010-280-40011 #)241,00A141631530010-315-40011 #)

Check valves

Tappingsaddles


DIN

33 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 10/00



002

56,00A114116505010-050-00011 #)66,00A75216635010-063-00011 #)74,00A70216756510-075-00011 #)76,00A63316908010-090-00011 #)79,00A5631611010010-110-00011 #)80,00A4541612512510-125-00011 #)91,00A4051614012510-140-00011 #)

100,00A3361616015010-160-00011 #)180,00A71618015010-180-00011 #)160,00A12101620020010-200-00011 #)180,00A10101622520010-225-00011 #)207,00A1101625025010-250-00011 #)206,00A141628025010-280-00011 #)241,00A141631530010-315-00011 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 10/00


Note:# 1 1/4" BSP thread

003

66,00A75216635010-063-10011 #)74,00A70216756510-075-10011 #)76,00A63316908010-090-10011 #)79,00A5631611010010-110-10011 #)80,00A4541612512510-125-10011 #)91,00A4051614012510-140-10011 #)

100,00A3361616015010-160-10011 #)180,00A71618015010-180-10011 #)160,00A12101620020010-200-10011 #)180,00A10101622520010-225-10011 #)207,00A1101625025010-250-10011 #)206,00A141628025010-280-10011 #)241,00A5041631530010-315-10011 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 10/00


Note:# 1 1/2" BSP thread

004

66,00A75216635010-063-20011 #)74,00A70216756510-075-20011 #)76,00A63316908010-090-20011 #)79,00A5631611010010-110-20011 #)80,00A4541612512510-125-20011 #)91,00A4051614012510-140-20011 #)

100,00A3361616015010-160-20011 #)180,00A71618015010-180-20011 #)160,00A12101620020010-200-20011 #)180,00A10101622520010-225-20011 #)207,00A1101625025010-250-20011 #)206,00A141628025010-280-20011 #)241,00A141631530010-315-20011 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 10/00



005

66,00A75216635010-063-30011 #)74,00A70216756510-075-30011 #)76,00A63316908010-090-30011 #)79,00A5631611010010-110-30011 #)80,00A4541612512510-125-30011 #)91,00A4051614012510-140-30011 #)

100,00A336166315010-160-30011 #)180,00A71618015010-180-30011 #)160,00A12101620020010-200-30011 #)180,00A10101622520010-225-30011 #)207,00A1101625025010-250-30011 #)206,00A141628025010-280-30011 #)241,00A141631530010-315-30011 #)

Tappingsaddles


DIN

34 2007-07-10 10:47 CET

2007-01-01


Tappin

g

saddle

s

Type AVK ref. nos. DN D. ext. Weight Gross price mm BSP kg Euro

10-9-5500-080-04081 80-300 40 1 1/2” 9,8 433

DN Range10-9-0002-104-00009 80 89-104 6110-9-0002-130-00009 100 108-130 6310-9-0002-159-00009 125 133-159 6610-9-0002-190-00009 150 159-190 6710-9-0002-252-00009 200 216-252 7510-9-0002-308-00009 250 267-308 7810-9-0002-368-00009 300 318-368 84

Series 10/9 Stirrup

Flexible stirrup, rubber lined for ductile iron- steel- and asbestos cement pipes acc. to DIN 3543to be used for 10/9 MMG, SV-G, SV-ST

DIN

Series 10/9, MMG

Under pressure drilling tapping saddle with integrated shut off and fraiser for ductile iron pipes acc to DIN 3543External epoxy coatingInternal enameledMax torque 100 Nmmax speed 200 rpm

2007-01-01


Tappin

g

saddle

s

DN 25 - 1” 10-9-2005-090-02081 80 90 8.5 23310-9-2005-110-02081 100 110 10.5 23410-9-2005-140-02081 125 140 /125 11.5 25710-9-2005-160-02081 150 160 12.5 26710-9-2005-225-02081 200 225 15.5 28910-9-2107-280-02081 250 280 19.0 40510-9-2107-315-02081 300 315 21.5 424

DN 32 - 1 1/4”

10-9-2005-090-03081 80 90 8.5 233 10-9-2005-110-03081 100 110 10.5 23410-9-2005-140-03081 125 140 /125 11.5 25710-9-2005-160-03081 150 160 12.5 26710-9-2005-225-03081 200 225 15.5 28910-9-2107-280-03081 250 280 18.5 40510-9-2107-315-03081 300 315 21.0 424

DN 40 - 1 1/2”10-9-2005-090-04081 80 90 8.5 23310-9-2005-110-04081 100 110 10.5 23410-9-2005-140-04081 125 140 /125 11.5 25710-9-2005-160-04081 150 160 12.5 26710-9-2005-225-04081 200 225 15.5 28910-9-2107-280-04081 250 280 18.5 40510-9-2107-315-04081 300 315 21.0 424

DN 50 - 2”10-9-2007-110-05081 100 110 13.5 35410-9-2007-125-05081 125 140 /125 - 38010-9-2007-160-05081 150 160 15.5 380 10-9-2007-225-05081 200 225 18.0 38710-9-2107-280-05081 250 280 22.0 44410-9-2107-315-05081 300 315 23.0 462

Series 10/9, SVK

Under pressure drilling tapping saddle with integrated disc shut offfor PVC pipes acc to 3543PN 16External epoxy coatingInternal enameledThreaded outlet

Type AVK ref. nos. DN D. ext. Weight Gross price mm kilos Euro D

IN

2007-01-01


Tappin

g

saddle

s

Type AVK ref. nos. DN D. ext. Weight Gross price mm mm kg Euro

DN 25 - 1” 10-9-5007-063-02081 50 63 4.5 233 10-9-5007-075-02081 65 75 5.0 22810-9-5107-090-02081 80 90 6.0 22910-9-5107-110-02081 100 110 6.5 23810-9-5107-140-02081 125 140 7.0 27710-9-5107-160-02081 150 160 8.0 277

DN 32 - 11/4”10-9-5007-063-03081 50 63 4.5 223 10-9-5007-075-03081 65 75 5.0 22810-9-5107-090-03081 80 90 6.0 22910-9-5107-110-03081 100 110 6.5 23810-9-5107-140-03081 125 140 7.0 27710-9-5107-160-03081 150 160 8.0 277

DN 40 - 11/2”10-9-5107-090-04081 80 90 6.0 22910-9-5107-110-04081 100 110 6.5 23810-9-5107-140-04081 125 140 7.0 27710-9-5107-160-04081 150 160 8.0 277

DIN

Series 10/9, F

Under pressure drilling tapping saddle with integrated shut offfor PVC pipes acc to 3543PN 16External epoxy coatingInternal enameledThreaded outlet

2007-01-01


Tappin

g

saddle

s

Type AVK ref. nos. DN Weight Gross price mm kg Euro

Series 10/9, MVK

Under pressure drilling tapping saddle with shut offfor PVC-pipesValve in brass, saddle in GGGStirrup in SSPN 16

Series 10/9, MVS

Under pressure tapping saddle with integrated shut offFor ductile iron- steel and asbestos cement pipesValve in brassSaddle in GGG, epoxy coated Stirrup in SSPN 16Threaded outlet.

Series 10/9, MVE

Valve for under pressure drilling tapping saddleBrass CuZn40Pb2 Threaded connectionsPN 16

. DN 40 - 1 1/2” DN da 10-9-4107-090-04080 80 90 6.0 208 10-9-4107-110-04080 100 110 6.5 211 10-9-4107-140-04080 125 140 7.5 214 10-9-4107-160-04080 150 160 8.0 215 10-9-4107-225-04080 200 225 10.0 257 10-9-4107-280-04080 250 280 16.0 339 10-9-4107-315-04080 300 315 18.0 359

DN 40 - 1 1/2” DN Saddle10-9-4203-106-04080 80 A 5.5 176 10-9-4203-126-04080 100 A 6.0 176 10-9-4203-152-04080 125 A 6.0 176 10-9-4203-178-04080 150 A 6.0 176 10-9-4203-234-04080 200 B 7.0 185 10-9-4203-286-04080 250 B 7.0 186 10-9-4203-334-04080 300 B 7.0 186 10-9-4203-386-04080 400 B 7.5 On request 10-9-4203-365-04080 400 B 7.5 On request

DN 40 - 1 1/2” Saddle with rubber10-9-4204-106-04080 80 A 5.5 18510-9-4204-126-04080 100 A 6.0 18510-9-4204-152-04080 125 A 6.0 18510-9-4204-178-04080 150 A 6.0 185 10-9-4204-234-04080 200 B 7.0 19110-9-4204-286-04080 250 B 7.0 20110-9-4204-334-04080 300 B 7.0 20110-9-4204-386-04080 400 B 7.5 On request 10-9-4204-365-04080 400 B 7.5 On request

For DN 80-150: Saddle AFor DN 200-400: Saddle B

10-9-4000-010-04089 2.0 115

DIN

Gross priceEUR

Deliv.-code

DN/DNmm

AVK ref. nos.Type

Series 10/10

SMHM universaltapping saddlefor service ballvalveDN 32-300

001

78,00B37-4210-042-1051060067,00B47-5210-052-1051060094,00B47-6010-060-1051060067,00B58-7110-071-1051060074,00B58-7110-071-1061060067,00B68-8810-088-1051060074,00B68-8810-088-1061060067,00B87-10910-109-1051060074,00B87-10910-109-1061060067,00B106-12810-128-1051060076,00B106-12810-128-1061060078,00B131-15210-152-1051060085,00B131-15210-152-1061060083,00B157-18210-182-1051060092,00B157-18210-182-10610600

101,00B191-20710-207-10510600112,00B191-20710-207-10610600107,00B216-23410-234-10510600123,00B216-23410-234-10610600136,00B239-26710-267-10510600150,00B239-26710-267-10610600134,00B269-28810-288-10510600141,00B269-28810-288-10610600159,00B291-31110-311-10510600170,00B291-31110-311-10610600150,00B310-33610-336-10510600163,00B310-36610-336-10610600

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 05/01

Combi-flange for D.I.PVC- and PE-pipesStandard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-600

001

43,00A120210/165005-050-210025,00A140310/166505-060-210027,00A140310/166505-060-220045,00A140210/166505-065-210029,00A150210/168005-080-210036,00A184310/1610005-100-210064,00A105510/1612505-125-210055,00A105510/1612505-125-220065,00A84510/1615005-150-2100

101,00A4281020005-200-2100117,00A4281020005-200-2400101,00A4281620005-200-4100117,00A4281620005-200-4400157,00A30141025005-250-2100185,00A30141025005-250-2400163,00A30141025005-250-4100184,00A30141625005-250-4400227,00A15201030005-300-2100241,00A15201030005-300-2400250,00A15201630005-300-4100260,00A15201630005-300-4400357,00A10301040005-400-2100348,00A10301040005-400-2400652,00A1521050005-500-2100608,00A1521050005-500-2200828,00A1521650005-500-4200873,00A1801060005-600-2200

Tappingsaddles

Couplings


DIN

35 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


Dmm

DN mm

AVK ref. nos.Type

Series 05/02

Standard sealingring for PE-pipesDN 50-600

002

16,00A1200635005-050-031020,00A1402756505-065-031027,00A1503908005-080-031027,00A184311010005-100-031046,00A105614012505-125-031042,00A105612512505-125-131046,00A84616015005-150-031084,00A421020020005-200-031059,00A42922520005-200-1310

119,00A301625025005-250-031085,00A301628025005-250-1310

104,00A152231530005-300-0310400,00A103840040005-400-0310550,00A15950050005-500-0310600,00A18663060005-600-0310

Gross priceEUR

Deliv.-code

Units pr.pallet


Dmm

DN mm

AVK ref. nos.Type

Series 05/03

Standard sealingring for ductileiron pipesDN 50-600

003

16,00A1200655005-050-021035,00A1400826505-065-021025,00A1500988005-080-021025,00A184011810005-100-021075,00A105114412505-125-021064,00A84117015005-150-021080,00A42122220005-200-0210

116,00A30227425005-250-0210103,00A15232630005-300-0210245,00A10442840005-400-0210374,00A1453250005-500-0210401,00A1563660005-600-0210

Gross priceEUR

Deliv.-code

Units pr.pallet


Dmm

DN mm

AVK ref. nos.Type

Series 05/04

Non-tensileresistant sealingring forD.I.-pipesAcc. to EN 545DN 65-300

004

51,00A2826505-065-026042,00A3988005-080-026038,00A411810005-100-026066,00A514412505-125-026068,00A717015005-150-026088,00A1122220005-200-0260

109,00A1727425005-250-0260151,00A2332630005-300-0260

Gross priceEUR

Deliv.-code

Units pr.pallet


Dmm

DN mm

AVK ref. nos.Type

Series 05/05

Tensile resistantsealing ring forPVC-ppipesDN 50-300

005

55,00A1200635005-063-5001166,00A1401756505-075-5001169,00A1501908005-090-5001172,00A184111010005-110-50011

176,00A105212512505-125-50011199,00A105214012505-140-50011159,00A84216015005-160-50011354,00A42420020005-200-50011293,00A42322520005-225-50011503,00A30625025005-250-50011387,00A30328025005-280-50011534,00A15631530005-315-50011

Couplings


DIN

36 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


Dmm

DN mm

AVK ref. nos.Type

Series 05/06

Tensile resistantsealing ring forD.I.-pipesAcc. to EN 545DN 65-300

Note:# Not to EN 545

006

142,00A1202666505-066-5011695,00A1402776505-077-50116

104,00A1402826505-082-5011682,00A1503988005-098-5011675,00A184411810005-118-50116

146,00A105614412505-144-50116131,00A84617015005-170-50116163,00A421022220005-222-50116306,00A301827425005-274-50111 #)347,00A152532630005-326-50111 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


Dmm

DN mm

AVK ref. nos.Type

Series 05/07

Tensile resistantsealing ring forPE-pipesDN 50-300

007

55,00A1200635005-063-5031165,00A1401756505-075-5031168,00A1501908005-090-5031172,00A184111010005-110-50311

178,00A105212512505-125-50311200,00A105114012505-140-50311162,00A84216015005-160-50311357,00A42420020005-200-50311296,00A421222520005-225-50311506,00A302025025005-250-50311391,00A301828025005-280-50311539,00A152631530005-315-50311

Gross priceEUR

Deliv.-code

Units pr.pallet


Dmm

DN mm

AVK ref. nos.Type

Series 05/08

Support bush forPE-pipesDN 250-300

Note:# For PE80, PN

6.3 andPE100, PN 10

008

138,00A128025005-280-73000 #)149,00A131530005-315-73000 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


Dmm

DN mm

AVK ref. nos.Type

Series 05/08

Support bush forPE-pipesDN 125-300

Note:# For PE80, PN

10 and PE100,PN 16

009

98,00A012512505-125-74000 #)98,00B014012505-140-74000 #)

138,00A128025005-280-74000 #)149,00A131530005-315-74000 #)

Couplings


DIN

37 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Dmm

DN mm

AVK ref. nos.Type

Series 51/03

SMHM serviveball valve forPE- anduPVC-pipesStraight boreBody in bronzeNF approvedDN 20-40

Note:# Thread:

M40x3## Thread: M55x3

001

93,00B252051-020-03000 #)100,00B322051-020-03001 #)221,00B403251-032-03012 ##)221,00B503251-032-03013 ##)257,00B504051-040-03013 ##)319,00B634051-040-03014 ##)

Gross priceEUR

Deliv.-code

Dmm

DN mm

AVK ref. nos.Type

Series 51/04

SMHM serviveball valveuniversal typeforPE/uPVC-pipesStraight boreBody in bronzeNF approvedDN 20-40

Note:# Thread: M40x3## Thread: M55x3

001

156,00B252051-020-04000 #)170,00B322051-020-04001 #)520,00B403251-032-04012 #)527,00B504051-040-04013 ##)

Others


DIN

38 2007-07-10 10:47 CET

2007-01-01

Certific

ate

s

Valve certificates for water Price list 2007

DIN

Series 95

Factory certificate 2.2according to EN 10204 with attachment

Series 95

Factory certificate 2.2 according to EN 10204 without attachment

Series 95

Factory certificate 3.1 according to EN 10204 with attachment

Series 95


Series 95

Certificate of conformity

Series 95


Nett. price per shipment9512210 25


Nett. price per valve9513110 5

Nett. price per valve 9513100 3



NOTE: PRICES FOR CERTIFICATES ARE NETT. PRICES

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 02/76

Flanged gate valveFace to face DIN F5Ductile ironPos-indicator &handwheelEPDM rubber wedgeStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 40-400


003

396,00B1110/164002-040-76016404,00B201210/165002-050-76016525,00B1510/166502-065-76016530,00B141910/168002-080-76016611,00B122510/1610002-100-76016995,00B93310/1612502-125-76016

1.010,00B84910/1615002-150-760161.785,00B6701020002-200-760062.512,00B41101025002-250-760062.596,00B41101625002-250-760163.622,00B21601030002-300-760066.926,00B23201035002-350-76006 #)7.166,00B23201035002-350-76016 #)8.608,00B23421040002-400-760068.883,00B23421640002-400-76016

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/34

Flanged gate valveFace to face DIN F4Ductile ironAISI 316 stemEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-400

003

214,00B361010/164006-040-34016224,00B361110/165006-050-34016307,00B301410/166506-065-34016371,00B202310/1610006-100-34016650,00B104610/1615006-150-34016

1.161,00B10651020006-200-340061.213,00B10651620006-200-340161.771,00B81021025006-250-340061.851,00B81021625006-250-340162.419,00B61491030006-300-340062.579,00B61491630006-300-340165.049,00B22031035006-350-340065.289,00B22031635006-350-340166.731,00B12151040006-400-340067.057,00B12151640006-400-34016

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/80

Flanged gate valveFace to face DIN F4Ductile ironNBR rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 50-400

003

198,00A361310/165006-050-80012276,00A301610/166506-065-80012276,00A202010/168006-080-80012325,00A202710/1610006-100-80012559,00A153610/1612506-125-80012559,00A104510/1615006-150-80012973,00A10751020006-200-80002

1.213,00B10751620006-200-800121.526,00A81091025006-250-800022.244,00B61491630006-300-800126.508,00A13191040006-400-80002

Gate valves

Products for sewage according to DIN

DIN

39 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/84

Flanged gate valveFace to face DIN F4Ductile ironAISI 316 stemNBRNBR rubber wedge withDVGW KTW approvalStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-400

003

214,00B361010/164006-040-84013224,00B361110/165006-050-84013307,00B301410/166506-065-84013318,00B201810/168006-080-84013371,00B202310/1610006-100-84013621,00B153110/1612506-125-84013650,00B104610/1615006-150-84013

1.161,00B10651020006-200-840031.213,00B10651620006-200-840131.771,00B81021025006-250-840031.851,00B81021625006-250-840132.419,00B61491030006-300-840032.579,00B61491630006-300-840135.049,00B22031035006-350-840035.289,00B22031635006-350-840136.731,00B12151040006-400-840037.057,00B12151640006-400-84013

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/89

Flanged gate valve with risingstemFace to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drilling to ISO7005-2, EN1092-2: 1997Epoxy coated according toDIN 30677-2 and GSK guidelinesClosing direction: CTCDN 50-250

003

615,00A361210/165006-050-89014704,00A301610/166506-065-89014704,00A201910/168006-080-89014826,00A203310/1610006-100-89014

1.151,00A105310/1615006-150-890141.620,00A841020006-200-890042.374,00A951025006-250-89004

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 15/42

Flanged gate valveprepared for actuatorFace to face DIN F4Actuator on requestEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-300

003

984,00A361310/164015-040-40016984,00A361410/165015-050-40016984,00A301710/166515-065-42016984,00A202110/168015-080-42016

1.070,00A202410/1610015-100-420161.376,00A153410/1612515-125-400161.376,00A104910/1615015-150-420161.684,00A10681020015-200-420061.736,00A10681620015-200-420162.840,00A81131025015-250-420062.920,00A81131625015-250-420163.367,00A61601030015-300-420063.479,00A61601630015-300-42016

Gate valves


DIN

40 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 15/72

Flanged gate valveprepared foractuatorFace to face DIN F5Actuator on requestEPDM rubber wedgeStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTCDN 40-500


003

984,00B361410/164015-040-70016984,00B201410/165015-050-70016984,00B171810/166515-065-72016984,00B142110/168015-080-72016

1.070,00B202410/1610015-100-720161.376,00B84910/1615015-150-720161.684,00B6681020015-200-720061.738,00B6681620015-200-720162.840,00B41131025015-250-720062.924,00B41131625015-250-720163.367,00B21601030015-300-720063.483,00B21601630015-300-720166.998,00B22961035015-350-72006 #)7.238,00B22961635015-350-72016 #)9.020,00B23531040015-400-720069.346,00B23531640015-400-720169.530,00B13721045015-450-72006 ##)9.881,00B13721645015-450-72016 ##)

10.786,00B14301050015-500-72006 ##)11.274,00B14301650015-500-72016 ##)

Gross priceEUR

AVK ref. nos.Type

Series 715/00

Accessories for pneumatic controlled valve

Note:# Coil 24V DC and illuminating seal, To be

ordered together with 715/30## Coil 240 V AC and illuminating seal,To be

ordered together with 715/30

000

0,00715-400-007 #)0,00715-400-008 ##)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 715/30

Pneumatic controlled valvewith solenoid valve kit and prox.swit.Double-actingFace to face DIN F4Standard flange drilling to ISO7005-2, EN1092-2: 1997Epoxy coated according to DIN30677-2 and GSK guide linesClosing direction: CTCDN 65-300

003

2.875,00A181065715-065-30030093.085,00A221080715-080-30030093.190,00A2710100715-100-30030094.180,00A5210150715-150-30030099.150,00A7510200715-200-3003009

10.190,00A11210250715-250-300300912.370,00A18010300715-300-3003009

Gate valves


DIN

41 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 701/33

Kinetic air valveSingle acting Large orificeStandard flange drilling toISO 7005-2, EN 1092-2:1997DN 80-100

010

5.259,00A241680701-080-33115.259,00A2416100701-100-3311

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 701/70

Combination airvalveDouble actingStandard flangedrilling to ISO7005-2, EN1092-2: 1997DN 50-200


010

2.967,00A171650701-050-70112.967,00A161650701-051-7091 #)3.017,00A181680701-080-70113.190,00A1916100701-100-70113.373,00A2116150701-150-70113.800,00A2416200701-200-7011

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 701/75

Short combinationair valveDouble actingReinforced nylonStandard flangedrilling to ISO7005-2, EN 1092-2:1997DN 50-100

Note:# 2" BSP thread## 3" BSP thread

010

2.267,00A41650701-050-75092.121,00A41650701-051-7509 #)2.421,00A41680701-080-75092.246,00A41680701-081-7509 ##)2.479,00A516100701-100-7509

Gross priceEUR

Deliv.-code


PN bar

DN mm

AVK ref. nos.Type

Series 702/10

Knife gate valve withnon-rising stem andhandwheelNBR sealingsStandard flange drilling toISO 7005-2, EN 1092-2:1997UV-resistantpolyester/epoxy coatingDN 50-600

003

624,00B810/1650702-050-1013639,00B910/1665702-065-1013702,00B1110/1680702-080-1013720,00B1410/16100702-100-1013823,00B1610/16125702-125-1013989,00B2510/16150702-150-1013

1.251,00B3510200702-200-10031.577,00B5510250702-250-10032.084,00B6810300702-300-10032.649,00B12010350702-350-10033.481,00B13510400702-400-10035.486,00B13610450702-450-10035.803,00B22510500702-500-10039.829,00B30110600702-600-1003

Air valves

Knife

gate valves


DIN

42 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code


PN bar

DN mm

AVK ref. nos.Type

Series 702/20

Knife gate valve with risingstem and handwheelNBR sealingsStandard flange drilling toISO 7005-2, EN 1092-2: 1997UV-resistant polyester/epoxycoatingDN 50-600

003

543,00B710/1650702-050-2013561,00B810/1665702-065-2013702,00B1110/1680702-080-2013720,00B1310/16100702-100-2013777,00B1510/16125702-125-2013930,00B2510/16150702-150-2013

1.527,00B5510250702-250-20031.927,00B6710300702-300-20033.427,00B13510400702-400-20035.357,00B13610450702-450-20039.596,00B30010600702-600-2003

Gross priceEUR

Deliv.-code


PN bar

DN mm

AVK ref. nos.Type

Series 702/30

Knife gate valve withwith quick operationleverNBR sealingsStandard flangedrilling to ISO7005-2, EN 1092-2:1997UV-resistantpolyester/epoxycoatingDN 80-150

003

702,00B1210/1680702-080-3013720,00B1410/16100702-100-3013823,00B1610/16125702-125-3013989,00B2510/16150702-150-3013

Gross priceEUR

Deliv.-code


PN bar

DN mm

AVK ref. nos.Type

Series 702/40

Knife gate valve with pneumaticdouble-acting actuatorNBR sealingsStandard flange drilling to ISO7005-2, EN 1092-2: 1997UV-resistant polyester/epoxycoatingDN 50-600

003

915,00B810/1650702-050-4013950,00B910/1665702-065-4013

1.020,00B1310/1680702-080-40131.326,00B1910/16125702-125-40131.599,00B2710/16150702-150-40132.419,00B3410200702-200-40032.997,00B6010250702-250-40033.324,00B7510300702-300-40035.701,00B15010350702-350-40036.679,00B17010400702-400-40039.269,00B28010450702-450-40039.934,00B28610500702-500-4003

15.296,00B36610600702-600-4003

Gross priceEUR

Deliv.-code


PN bar

DN mm

AVK ref. nos.Type

Series 702/50

Knife gate valve with ISOflange prepared for el-act. andrising stemNBR sealingsStandard flange drilling to ISO7005-2, EN 1092-2: 1997UV-resistant polyester/epoxycoatingDN 50-600

003

598,00B410/1650702-050-5013617,00B510/1665702-065-5013773,00B810/1680702-080-5013792,00B1010/16100702-100-5013854,00B1210/16125702-125-5013

1.023,00B5210/16150702-150-50131.320,00B4010200702-200-50031.679,00B5210250702-250-50032.120,00B7510300702-300-50032.816,00B2710350702-350-50033.770,00B13210400702-400-50035.893,00B20010450702-450-50036.169,00B28610500702-500-5003

10.555,00B29710600702-600-5003

Knife

gate valvesProducts for sewage according to DIN

DIN

43 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 53/35

Ball check valvewith flangesNBR rubberlined ballStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-400

003

245,00A28810/165053-050-351007273,00A201210/166553-065-351007309,00A201310/168053-080-351007383,00A151810/1610053-100-351007519,00A83510/1612553-125-351007674,00A83710/1615053-150-351007

1.200,00A4681020053-200-3500071.254,00B4681020053-200-3510072.435,00A21121025053-250-3500072.519,00B21121025053-250-3510074.565,00A11631030053-300-3500075.640,00B11631030053-300-3502074.681,00B11631030053-300-3510076.604,00A12891035053-350-3500078.148,00A14161040053-400-350007

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 53/30

Ball check valvewith BSPthreadsNBR rubberlined ballEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 32-50

005

107,00A1602103253-032-309007120,00A1002104053-040-309007155,00A803105053-050-309007

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 53/40

Ball check valvein stainless steelAISI 316 withBSP threadNBR rubberlined ballDN 32-80

005

154,00A1002103253-032-409090173,00A1002104053-040-409090302,00A803105053-050-409090374,00A207106553-065-409090513,00A207108053-080-409090

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 41/60

Swing checkvalve with freeshaft endEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300

003

662,00A181310/165041-050-60018742,00A151510/166541-065-60018

1.000,00A92410/1610041-100-600181.261,00A83810/1612541-125-600181.617,00A84610/1615041-150-600182.571,00A5781020041-200-600082.625,00B5781620041-200-600185.069,00A11831025041-250-600085.153,00B11831625041-250-600185.992,00A12311030041-300-600086.108,00B12311630041-300-60018

Ball

check valvesC

heck valves


DIN

44 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 41/61

Swing checkvalve withclosed bushingsEPDM rubberwedgeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300

003

514,00A181310/165041-050-61018584,00A151310/166541-065-61018662,00A151310/168041-080-61018814,00A92610/1610041-100-61018

1.046,00A84010/1612541-125-610181.323,00A85110/1615041-150-610182.062,00A5831020041-200-610082.116,00B5831620041-200-610184.180,00A11831025041-250-610084.264,00B11831625041-250-610185.348,00A12311030041-300-610085.464,00B12311630041-300-61018

Gross priceEUR

Deliv.-code

DN/DNmm

DN mm

AVK ref. nos.Type

Series 41/23

Swing checkvalve lever andweight kitEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 100-300

001

111,00A100-10010041-100-23000155,00A125-15015041-150-23000155,00A200-20020041-200-23000448,00A250-30030041-300-23000

Gross priceEUR

Deliv.-code


DN mm

AVK ref. nos.Type

Series 41/32

Swing checkvalve spring kitEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300

001

481,00A15041-050-32000483,00A16541-065-32000111,00A38041-080-230000000463,00A18041-080-32000478,00A110041-100-32000523,00A112541-125-32000523,00A115041-150-32000527,00A220041-200-32000

1.596,00A330041-300-32000

Check valves


DIN

45 2007-07-10 10:47 CET

2007-01-01

Valve certificates for sewage Price list 2007

Certific

ate

sD

IN

Series 95

Factory certificate 2.2 according to EN 10204with attachment

Series 95


Series 95


Series 95

Factory certificate 2.2 according to EN 10204without attachment

Series 95


Series 95





Nett. price per valve 9513100 3




Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 02/70

Flanged gate valveFace to face DIN F5Ductile ironNBR rubber wedgeStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 40-500

003

354,00B241110/164002-040-7001237364,00B201210/165002-050-7001237454,00B171510/166502-065-7001237454,00B141910/168002-080-7001237510,00B122510/1610002-100-7001237782,00B93310/1612502-125-7001237782,00B84910/1615002-150-7001237

1.260,00B6701020002-200-70002371.322,00B6701620002-200-70012372.036,00B41101025002-250-70002372.136,00B41101625002-250-70012372.134,00B21601030002-300-70002372.872,00B21601630002-300-70012375.658,00B23201635002-350-70012377.300,00B23301040002-400-70002377.664,00B23301640002-400-7001237

10.748,00B14171050002-500-700023711.286,00B14171650002-500-7001237

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 02/74

Flanged gate valveFace to face DIN F5Ductile ironPG3Standard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction:CTCDN 40-500

003

404,00A241110/164002-040-7401237414,00A201210/165002-050-7401237502,00B171510/166502-065-7401237502,00A141910/168002-080-7401237560,00A122510/1610002-100-7401237834,00A93310/1612502-125-7401237834,00A84910/1615002-150-7401237

1.310,00A6701020002-200-74002371.376,00A6701620002-200-74012372.100,00A41101025002-250-74002372.206,00A41101625002-250-74012372.802,00A21601030002-300-74002372.942,00A21601630002-300-74012375.454,00B23201035002-350-74003377.400,00A23301040002-400-74002377.770,00B23301640002-400-7401237

10.887,00B14171050002-500-740033711.432,00B14171650002-500-7401337

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/70

Flanged gate valveFace to face DIN F4Ductile ironNBR rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-300

003

338,00A361210/164006-040-7001237352,00A361210/165006-050-7001237438,00A301510/166506-065-7001237438,00A201910/168006-080-7001237494,00A202510/1610006-100-7001237756,00A153310/1612506-125-7001237756,00A104910/1615006-150-7001237

1.216,00A10701020006-200-70002371.278,00A10701620006-200-70012371.966,00A81101025006-250-70002372.064,00A81101625006-250-70012372.644,00A61601030006-300-70002372.776,00A61601630006-300-70012375.658,00A2031630006-350-7001237

Gate valves

Products for gas according to DIN

DIN

46 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/74

Flanged gate valveFace to face DIN F4Ductile ironPG3NBR rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTCDN 40-300

003

B301510/164006-040-7401237B361510/165006-050-7401237

400,00B361210/165006-050-7401337488,00B301510/166506-065-7401237488,00B201910/168006-080-7401237540,00B202510/1610006-100-7401237806,00B153310/1612506-125-7401337806,00B104910/1615006-150-7401237

1.266,00B10701020006-200-74002371.330,00B10701620006-200-74012372.025,00B81101025006-250-74002372.132,00B81101625006-250-74012372.708,00B61601030006-300-74002372.842,00B61601630006-300-74012375.755,00B2031030006-350-7400237

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 36/90

Gate valve withPE-pipesDuctile ironNBR rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 80-200

Note:# PE 80 PN 4 SDR 11 pipes

160

670,00B7204908036-090-90603037 #)764,00A527411010036-110-90603037 #)

1.340,00A352416015036-160-90603037 #)1.476,00B358418015036-180-90603037 #)2.520,00A491422520036-225-90603037 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 36/90


Note:# PE 100 PN 10 SDR 11 pipe

170

670,00A72010908036-090-90703037 #)764,00B5271011010036-110-90703037 #)976,00A3391012512536-125-90703037 #)

1.340,00B3521016015036-160-90703037 #)1.476,00B3581018015036-180-90703037 #)2.388,00A881020020036-200-90703037 #)2.520,00B4911022520036-225-90703037 #)3.581,00A118425025036-250-907030373.873,00B11261028025036-280-90703037 #)6.260,00B1401031530036-315-90703037 #)

Gate valves


DIN

47 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 36/90


Note:# PE 100 PN 10/4 SDR 11 pipe

171

670,00B7204908036-090-90713037 #)764,00B527411010036-110-90713037 #)976,00B339412512536-125-90713037 #)

1.476,00B358418015036-180-90713037 #)2.508,00A488420020036-200-90713037 #)2.520,00B491422520036-225-90713037 #)3.873,00B3126428025036-280-90713037 #)6.260,00B140431530036-315-90713037 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 46/64

Gate valve withspigot endsface to face S8PG3NBR rubber wedgeWith outside PURcoatingClosing direction:CTCDN 50-300

Note:# Design standard

according to EN13774

010

1.071,00A108165046-050-6401280 #)1.420,00A1016168046-080-6401280 #)1.501,00A8221610046-100-6401280 #)2.346,00A5381615046-150-6401280 #)3.471,00A4611620046-200-6401280 #)5.070,00A3861625046-250-6401280 #)6.707,00A21261630046-300-6401280 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 46/70

Gate valve withspigot endsPG2NBR rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosingdirection: CTCDN 50-300

Note:# Design standard according to EN 13774

005

788,00A13165046-050-7001237 #)1.050,00A1015168046-080-7001237 #)1.134,00A8261610046-100-7001237 #)1.788,00A6401615046-150-7001237 #)2.638,00A4721620046-200-7001237 #)2.696,00B4721620046-200-7401237 #)4.040,00A3931625046-250-7001237 #)5.554,00A21301630046-300-7001237 #)

Gate valves


DIN

48 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 46/70

Gate valve withspigot endsPG2NBR rubber wedgeWith outside PURcoatingClosing direction:CTCDN 50-300



010

1.013,00B1013165046-050-7001280 #)1.360,00A1016168046-080-7001280 #)1.479,00A8221610046-100-7001280 #)2.288,00A5381615046-150-7001280 #)3.413,00A4611620046-200-7001280 #)4.990,00A3861625046-250-7001280 #)6.629,00A21261630046-300-7001280 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 46/74

Gate valve withspigot endsPG3NBR rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesClosingdirection: CTCDN 50-300


005

846,00B13165046-050-7401237 #)1.110,00B1015168046-080-7401237 #)1.190,00B8261610046-100-7401237 #)1.846,00B5401615046-150-7401237 #)4.120,00B3931625046-250-7401237 #)5.632,00B21301630046-300-7401237 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 46/74

Gate valve withspigot endsPG3NBR rubber wedgeWith outside PURcoatingClosing direction:CTCDN 50-300



010

1.071,00B1013165046-050-7401280 #)1.420,00B1016168046-080-7401280 #)1.501,00B8221610046-100-7401280 #)2.346,00B5381615046-150-7401280 #)3.471,00B4611620046-200-7401280 #)5.070,00B3861625046-250-7401280 #)6.707,00B21261630046-300-7401280 #)

Gate valves


DIN

49 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 03/25

Service conn. valveInternal threadDuctile ironPN 4 PG 2NBR rubber wedge withDVGW KTW approvalEpoxy coated accordingto DIN 30677-2 andGSK guide linesClosing direction: CTCDN 25-50

004

185,00A96342503-032-2500237240,00A55544003-050-2500237324,00A45645003-063-2500237

Serviceconn. valves


DIN

50 2007-07-10 10:47 CET

2007-01-01

Certificates

Valve certificates for gas Price list 2007

Type AVK ref. nos. Nett. price Euro

Series 95


Series 95


Series 95


Series 95


Series 95








DIN

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/35

Flanged gate valve with PinIndicatorFace to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2: 1997Epoxy coated according toDIN 30677-2 and GSK guidelinesClosing direction: CTCDN 200-300

Note:# Not approved to VdS## Approved acc. to NF

013

1.347,00A3711020006-200-35006202.112,00A21131025006-250-3500620 #)2.951,00A11601030006-300-3500420 #)6.626,00B201630006-350-3500620 ##)6.866,00B201630006-350-3501620 ##)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 06/35

Flanged gate valve with PinIndicatorFace to face DIN F4Ductile ironEPDM rubber wedgeStandard flange drilling toISO 7005-2, EN1092-2: 1997Epoxy coated according toDIN 30677-2 and GSK guidelinesClosing direction: CTCDN 50-300

Note:# Not approved to VdS

014

283,00A241310/165006-050-3501420380,00A181610/166506-065-3501420380,00A202010/168006-080-3501420452,00A202710/1610006-100-3501420764,00A63610/1612506-125-3501420764,00A55110/1615006-150-3501420

1.399,00A6711620006-200-35016202.192,00A21131625006-250-3501620 #)3.063,00A11601630006-300-3501620 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 25/46

Flanged gate vale withrising stem OS&YAWWA C509EPDM rubber wedgeANSI B16.1 CLASS 125 -ANSI B16.5 CLASS 150AWWA C550Closing direction: CTCDN 65-300


according to AWWA C509(OS&Y)

010

524,00A2010/166525-065-4601600020 #)538,00A2510/168025-080-4601600020 #)647,00A3910/1610025-100-4601600020 #)941,00A6310/1615025-150-4601600020 #)

1.543,00A971620025-200-4601600020 #)2.523,00A1571625025-250-4601600020 #)4.327,00A2381630025-300-4601600020 #)

Gate valves

Products for firefight according to DIN

DIN

51 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 45/5

Resilient SeatedDuctile Iron GateValve250 PSIFLFLEPDM rubber wedgeANSI B16.1 CLASS125 - ANSI B16.5CLASS 150AWWA C550Closing direction:CTCDN 100-300

Note:# Design standard according to AWWA C509

(NRS)

001

677,008910/1610045-100-5702634029 #)1.226,0013310/1615045-150-5702634029 #)1.637,001991620045-200-5702634029 #)2.348,00B2981625045-250-5702634029 #)4.732,00B3831630045-300-5702634029 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 06/37

Grooved end gatevalve with Pin Indicatoraccording to AWWA C606Ductile ironEPDM rubber wedgeStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesClosing direction: CTOor CTCDN 50-300


003

A010/16605006-050-3709620 #)A1310/16898006-080-3709620 #)A1810/1611410006-100-3709620 #)A3910/1616815006-150-3709620 #)A551621920006-200-3709620 #)A831627325006-250-3709620 #)A1151632430006-300-3709620 #)

Gate valves

Products for firefight according to DIN

DIN

52 2007-07-10 10:47 CET

Designed according to EN 593EN

593


Water

756/1, Double eccentric butterflyvalve, Series 14 (F4), Ductileiron, DN 200-600

53

756/2, Double eccentric butterflyvalve, Series 14 (F4), Ductileiron, DN 700-1200

57

76/70, Butterfly valve,concentric, Wafer typeEuronomic

59

76/71, Butterfly valve,concentric, Lug type Euronomic

61

75/30, Butterfly valve,concentric, Semi lug type, GG

61

75/31, Butterfly valve,concentric, Semi lug type, GGG

62

75/40, Butterfly valve,concentric, Double flanged type,ISO 13, GG

62

75/41, Butterfly valve,concentric, Double flanged type,ISO 13, GGG

63

SEWAGE

76/70, Butterfly valve,concentric, Wafer typeEuronomic

64

76/71, Butterfly valve,concentric, Lug type Euronomic

66

75/30, Butterfly valve,concentric, Semi lug type, GG

66


67

GAS


69


69

FIRE PROTECTION

75/31, Butterfly valve,concentric, Semi lug type, GGG

70


70

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 200-600

Note:# IP 67 ISO flange gearbox

05

3.148,00B44010200756-0200-106002 #)3.465,00B45810250756-0250-106002 #)4.468,00B8310300756-0300-106002 #)5.190,00B11010350756-0350-106002 #)5.613,00B14210400756-0400-106002 #)7.168,00B18410450756-0450-106002 #)8.223,00B24010500756-0500-106002 #)

10.475,00B41010600756-0600-106002 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 200-600

Note:# IP 67 ISO flange gearbox

10

3.248,00B4016200756-0200-116002 #)3.795,00B5816250756-0250-116002 #)4.878,00B8316300756-0300-116002 #)6.088,00B11016350756-0350-116002 #)6.610,00B14216400756-0400-116002 #)8.692,00B18416450756-0450-116002 #)

10.316,00B24016500756-0500-116002 #)13.682,00B41016600756-0600-116002 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 200-600

Note:# IP 68 gearbox for buried service

05

2.818,00B4010200756-0200-106006 #)3.135,00B5810250756-0250-106006 #)4.138,00B8310300756-0300-106006 #)4.860,00B11010350756-0350-106006 #)5.283,00B14210400756-0400-106006 #)6.838,00B18410450756-0450-106006 #)7.893,00B24010500756-0500-106006 #)

10.145,00B41010600756-0600-106006 #)

Butterflyvalves

Products for water according to EN593

EN 593

53 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 200-600

Note:# IP 68 gearbox for buried service

10

2.918,00B4016200756-0200-116006 #)3.465,00B5816250756-0250-116006 #)4.548,00B8316300756-0300-116006 #)5.758,00B11016350756-0350-116006 #)6.280,00B14216400756-0400-116006 #)8.692,00B18416450756-0450-116006 #)9.986,00B24016500756-0500-116006 #)

13.352,00B141016600756-0600-116006 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 200-600

Note:# IP 65 gearbox

05

2.548,00A4010200756-0200-106 #)2.865,00A4010250756-0250-106 #)3.868,00A5810300756-0300-106 #)4.590,00A11010350756-0350-106 #)5.013,00A14210400756-0400-106 #)6.568,00A14210450756-0450-106 #)7.623,00A24010500756-0500-106 #)9.875,00A41010600756-0600-106 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesClosing direction: CTCDN 200-600


10

2.648,00A4016200756-0200-116 #)3.195,00A5816250756-0250-116 #)4.278,00A8316300756-0300-116 #)5.488,00A11016350756-0350-116 #)6.010,00A14216400756-0400-116 #)8.422,00A18416450756-0450-116 #)9.716,00A24016500756-0500-116 #)

13.082,00A41016600756-0600-116 #)

Butterflyvalves


EN 593

54 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 outside,enamelled toDEV insideClosing direction: CTCDN 200-600


05

2.948,00B4010200756-0200-1061 #)3.465,00B5810250756-0250-1061 #)4.663,00B8310300756-0300-1061 #)6.090,00B11010350756-0350-1061 #)6.513,00B14210400756-0400-1061 #)8.068,00B18410450756-0450-1061 #)9.123,00B24010500756-0500-1061 #)

11.375,00B41010600756-0600-1061 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 outside,enamelled toDEV insideClosing direction: CTCDN 200-600


10

3.048,00B4016200756-0200-1161 #)3.795,00B5816250756-0250-1161 #)5.103,00B8316300756-0300-1161 #)6.313,00B11016350756-0350-1161 #)7.513,00B14216400756-0400-1161 #)9.922,00B18416450756-0450-1161 #)

11.216,00B24016500756-0500-1161 #)14.582,00B41016600756-0600-1161 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK approvedClosing direction: CTCDN 200-600

Note:# IP 65 gearbox, Stainless steel AISI 316 seat

05

3.276,00B44010200756-0200-10700005 #)3.850,00B45810250756-0250-10700005 #)5.181,00B48310300756-0300-10700005 #)6.767,00B311010350756-0350-10700005 #)7.237,00B214210400756-0400-10700005 #)8.964,00B218410450756-0450-10700005 #)

10.137,00B124010500756-0500-10700005 #)12.639,00B141010600756-0600-10700005 #)

Butterflyvalves


EN 593

55 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK approvedClosing direction: CTCDN 200-600

Note:# IP 65 gearbox, Stainless steel AISI 316 seat

10

3.387,00B44016200756-0200-11700005 #)4.217,00B45816250756-0250-11700005 #)5.670,00B48316300756-0300-11700005 #)7.014,00B311016350756-0350-11700005 #)8.348,00B214216400756-0400-11700005 #)

11.024,00B218416450756-0450-11700005 #)12.462,00B124016500756-0500-11700005 #)16.202,00B141016600756-0600-11700005 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK approvedDN 200-600

Note:# IP 67 ISO flange gearbox, Stainless steel

AISI 316 seat

05

4.044,00B44010200756-0200-10700205 #)4.639,00B45810250756-0250-10700205 #)6.025,00B48310300756-0300-10700205 #)7.689,00B311010350756-0350-10700205 #)8.131,00B214210400756-0400-10700205 #)9.744,00B218410450756-0450-10700205 #)

10.900,00B124010500756-0500-10700205 #)13.446,00B141010600756-0600-10700205 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK approvedDN 200-600

Note:# IP 67 ISO flange gearbox, Stainless steel

AISI 316 seat

10

4.181,00B44016200756-0200-11700205 #)5.080,00B45816250756-0250-11700205 #)6.593,00B48316300756-0300-11700205 #)7.971,00B311016350756-0350-11700205 #)9.380,00B214216400756-0400-11700205 #)

11.983,00B218416450756-0450-11700205 #)13.400,00B124016500756-0500-11700205 #)17.236,00B141016600756-0600-11700205 #)

Butterflyvalves


EN 593

56 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK approvedClosing direction: CTCDN 200-600

Note:# IP 68 gearbox, Stainless steel seat

05

3.640,00B44010200756-0200-10700605 #)4.278,00B45810250756-0250-10700605 #)5.571,00B48310300756-0300-10700605 #)7.276,00B311010350756-0350-10700605 #)7.618,00B214210400756-0400-10700605 #)9.436,00B218410450756-0450-10700605 #)

10.559,00B124010500756-0500-10700605 #)13.030,00B141010600756-0600-10700605 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/1

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 200-600EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK approvedClosing direction: CTCDN 200-600

Note:# IP 68 gearbox, Stainless steel seat

10

3.763,00B44016200756-0200-11700605 #)4.685,00B45816250756-0250-11700605 #)6.097,00B48316300756-0300-11700605 #)7.542,00B311016350756-0350-11700605 #)8.787,00B214216400756-0400-11700605 #)

11.605,00B218416450756-0450-11700605 #)12.981,00B124016500756-0500-11700605 #)13.030,00B141016600756-0600-11700605 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/2

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 700-1200EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesClosing direction: CTCDN 700-1200

Note:# Prices on request, IP 68 gearbox

07

B81610700756-0700-104006 #)B122810800756-0800-104006 #)B129210900756-0900-104006 #)B1704101000756-1000-104006 #)B2599101200756-1200-104006 #)

Butterflyvalves


EN 593

57 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/2

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 700-1200EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesClosing direction: CTCDN 700-1200

Note:# Prices on request, IP 68 gearbox

12

B81616700756-0700-114006 #)B122816800756-0800-114006 #)B129216900756-0900-114006 #)B2599161200756-1200-114006 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/2

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 700-1200EPDM sealingsStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 700-1200

Note:# Prices on request, Stainless steel seat

05

0,00B153510700756-0700-10400815 #)0,00B168710800756-0800-10400815 #)0,00B197110900756-0900-10400815 #)0,00B11262101000756-1000-10400815 #)0,00B11953101200756-1200-10400815 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 756/2

Double eccentricbutterfly valveSeries 14 (F4)Ductile ironDN 700-1200EPDM sealingsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 700-1200

Note:# Prices on request, Stainless steel seat

10

0,00B153516700756-0700-11400815 #)0,00B168716800756-0800-11400815 #)0,00B197116900756-0900-11400815 #)0,00B11262161000756-1000-11400815 #)0,00B11953161200756-1200-11400815 #)

Butterflyvalves


EN 593

58 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/70

Butterfly valveconcentricWafer type EuronomicEPDM rubber lined ballStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Polyester RAL 501780 myClosing direction: CTCDN 50-300

Note:# Body in GG 25, nickel

plated cast steel disc

01

117,00B3165076-0050-708170026901 #)123,00B3166576-0065-708170026901 #)137,00B4168076-0080-708170026901 #)171,00B51610076-0100-708170026901 #)226,00B61612576-0125-708170026901 #)264,00B91615076-0150-708170026901 #)381,00B131620076-0200-708170026901 #)765,00B251025076-0250-708170026901 #)929,00B341030076-0300-708170026901 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/70

Butterfly valveconcentricWafer type EuronomicNBR rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Polyester RAL 501780 myClosing direction: CTCDN 50-300



02

117,00B3165076-0050-708070026901 #)123,00B3166576-0065-708070026901 #)137,00B4168076-0080-708070026901 #)171,00B51610076-0100-708070026901 #)226,00B61612576-0125-708070026901 #)264,00B91615076-0150-708070026901 #)381,00B131620076-0200-708070026901 #)765,00B251025076-0250-708070026901 #)929,00B341030076-0300-708070026901 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/70

Butterfly valveconcentricWafer type EuronomicEPDM rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Polyester RAL 501780 myClosing direction: CTCDN 125-300

Note:# Body in GGG 40, nickel


10

226,00B61612576-0125-708370026901 #)264,00B91615076-0150-708370026901 #)381,00B131620076-0200-708370026901 #)765,00B251025076-0250-708370013901 #)929,00B341030076-0300-708370013901 #)

Butterflyvalves


EN 593

59 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/70




11

171,00B51610076-0100-708270026901 #)226,00B61612576-0125-708270026901 #)264,00B91615076-0150-708270026901 #)381,00B131620076-0200-708270026901 #)765,00B251025076-0250-708270013901 #)929,00B341030076-0300-708270013901 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/70

Butterfly valveconcentricWafer type EuronomicEPDM rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Epoxy RAL 5017 80myClosing direction: CTCDN 65-300


plated cast steel disc## Body in GG 25, nickel plated cast steel

disc, with worm gear alu. body

20

144,00B3166576-0065-708170026902 #)158,00B4168076-0080-708170026902 #)195,00B51610076-0100-708170026902 #)250,00B61612576-0125-708170026902 #)295,00B91615076-0150-708170026902 #)411,00B131620076-0200-708170026902 #)936,00B251025076-0250-708170013902 ##)

1.101,00B341030076-0300-708170013902 ##)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/70

Butterfly valveconcentricWafer type EuronomicNBR rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Epoxy RAL 5017 80myClosing direction: CTCDN 50-250




21

137,00B3165076-0050-708070026902 #)144,00B3166576-0065-708070026902 #)158,00B4168076-0080-708070026902 #)195,00B51610076-0100-708070026902 #)250,00B61612576-0125-708070026902 #)411,00B131620076-0200-708070026902 #)936,00B251025076-0250-708070013902 ##)

Butterflyvalves


EN 593

60 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/71

Butterfly valveconcentricLug type EuronomicEPDM rubber lined bodyStandard flange drillingto ISO 7005-2, EN1092-2: 1997Blue Polyester RAL5017 80 myClosing direction: CTCDN 50-300



01

141,00B4165076-0050-718170026901 #)178,00B4166576-0065-718170026901 #)192,00B6168076-0080-718170026901 #)977,00B281025076-0250-718170013901 #)

1.224,00B381030076-0300-718170013901 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/71

Butterfly valveconcentricLug type EuronomicNBR rubber lined bodyStandard flange drillingto ISO 7005-2, EN1092-2: 1997Blue Polyester RAL5017 80 myClosing direction: CTCDN 50-300



02

141,00B4165076-0050-718070026901 #)178,00B4166576-0065-718070026901 #)501,00B161620076-0200-718070026901 #)977,00B281025076-0250-718070013901 #)

1.224,00B381030076-0300-718070013901 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/30

Butterfly valveconcentricSemi lug typeGGEPDM rubber linedbodyStandard flangedrilling to ISO7005-2, EN 1092-2:1997AVK coatingstandardClosing direction:CTCDN 50-200

Note:# Disc material in AISI 431

003

295,00A3165075-050-3010410009 #)302,00A4166575-065-3010410009 #)309,00A4168075-080-3010410009 #)353,00A51610075-100-3010410009 #)391,00A71612575-125-3010410009 #)525,00A101615075-150-3010410009 #)699,00A141620075-200-3010410009 #)

Butterflyvalves


EN 593

61 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/31

Butterfly valveconcentricSemi lug typeGGGEPDM rubber linedbodyStandard flangedrilling to ISO7005-2, EN 1092-2:1997AVK coatingstandardClosing direction:CTCDN 50-200


003

374,00A3165075-050-3110410009 #)391,00A4166575-065-3110410009 #)391,00A4168075-080-3110410009 #)442,00A51610075-100-3110410009 #)501,00A71612575-125-3110410009 #)648,00A101615075-150-3110410009 #)915,00A141620075-200-3110410009 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/40

Butterfly valveconcentricDouble flangedtypeISO 13GGEPDM rubber linedbodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600

Note:# Disc material in AISI 431## Disc material in Rilsan coated Ductile iron

003

638,00A8165075-050-4010410009 #)672,00A11168075-080-4010410009 #)765,00A131610075-100-4010410009 #)857,00A171612575-125-4010410009 #)

1.104,00A231615075-150-4010410009 #)1.378,00A321020075-200-4010400009 #)1.378,00A321620075-200-4010410009 #)2.218,00A501025075-250-4010400009 #)2.218,00A501025075-250-4010410009 #)2.218,00A501025075-250-4012400009 ##)2.585,00A651030075-300-4010400009 #)2.585,00A651030075-300-4010410009 #)2.523,00A651030075-300-4012400009 ##)2.523,00A651030075-300-4012410009 ##)3.648,00B951035075-350-4010400009 #)3.648,00B951035075-350-4010410009 #)3.346,00B951035075-350-4012400009 ##)3.346,00B951035075-350-4012410009 ##)5.997,00B1301040075-400-4010400009 #)5.997,00B1301040075-400-4010410009 #)5.335,00B1301040075-400-4012400009 ##)5.335,00B1301040075-400-4012410009 ##)8.537,00B1501045075-450-4010400009 #)8.537,00B1501045075-450-4010410009 #)6.792,00B1501045075-450-4012400009 ##)6.792,00B1501045075-450-4012410009 ##)9.182,00B2001050075-500-4010410009 #)7.371,00B2001050075-500-4012400009 ##)7.371,00B2001050075-500-4012410009 ##)

14.873,00B3001060075-600-4010400009 #)14.873,00B3001060075-600-4010410009 #)11.643,00B3001060075-600-4012400009 ##)11.643,00B3001060075-600-4012410009 ##)

Butterflyvalves


EN 593

62 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/41

Butterfly valveconcentricDouble flangedtypeISO 13GGGEPDM rubber linedbodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600


003

696,00A8165075-050-4110410009 #)741,00A9166575-065-4110410009 #)741,00A11168075-080-4110410009 #)864,00A131610075-100-4110410009 #)963,00A171612575-125-4110410009 #)

1.234,00A231615075-150-4110410009 #)1.605,00A321020075-200-4110400009 #)1.605,00A321620075-200-4110410009 #)2.393,00A501025075-200-4112400009 ##)2.393,00A501625075-250-4112410009 ##)2.695,00A651030075-300-4112400009 ##)2.695,00A651630075-300-4112410009 ##)3.843,00B951035075-350-4112400009 ##)3.843,00B951635075-350-4112410009 ##)5.451,00B1301040075-400-4112400009 ##)5.451,00B1301640075-400-4112410009 ##)7.286,00B1501045075-450-4112400009 ##)7.286,00B1501645075-450-4112410009 ##)7.951,00B2001050075-500-4112400009 ##)7.951,00B2001650075-500-4112410009 ##)

13.073,00B3001060075-600-4112400009 ##)13.073,00B3001660075-600-4112410009 ##)

Butterflyvalves


EN 593

63 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/70

Butterfly valveconcentricWafer type EuronomicEPDM rubber lined ballStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Polyester RAL 501780 myClosing direction: CTCDN 50-300



01

117,00B3165076-0050-708170026901 #)123,00B3166576-0065-708170026901 #)137,00B4168076-0080-708170026901 #)171,00B51610076-0100-708170026901 #)226,00B61612576-0125-708170026901 #)264,00B91615076-0150-708170026901 #)381,00B131620076-0200-708170026901 #)765,00B251025076-0250-708170026901 #)929,00B341030076-0300-708170026901 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/70




02

117,00B3165076-0050-708070026901 #)123,00B3166576-0065-708070026901 #)137,00B4168076-0080-708070026901 #)171,00B51610076-0100-708070026901 #)226,00B61612576-0125-708070026901 #)264,00B91615076-0150-708070026901 #)381,00B131620076-0200-708070026901 #)765,00B251025076-0250-708070026901 #)929,00B341030076-0300-708070026901 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/70

Butterfly valveconcentricWafer type EuronomicEPDM rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Polyester RAL 501780 myClosing direction: CTCDN 125-300



10

226,00B61612576-0125-708370026901 #)264,00B91615076-0150-708370026901 #)381,00B131620076-0200-708370026901 #)765,00B251025076-0250-708370013901 #)929,00B341030076-0300-708370013901 #)

Butterflyvalves

Products for sewage according to EN593

EN 593

64 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/70




11

171,00B51610076-0100-708270026901 #)226,00B61612576-0125-708270026901 #)264,00B91615076-0150-708270026901 #)381,00B131620076-0200-708270026901 #)765,00B251025076-0250-708270013901 #)929,00B341030076-0300-708270013901 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/70

Butterfly valveconcentricWafer type EuronomicEPDM rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Epoxy RAL 5017 80myClosing direction: CTCDN 65-300




20

144,00B3166576-0065-708170026902 #)158,00B4168076-0080-708170026902 #)195,00B51610076-0100-708170026902 #)250,00B61612576-0125-708170026902 #)295,00B91615076-0150-708170026902 #)411,00B131620076-0200-708170026902 #)936,00B251025076-0250-708170013902 ##)

1.101,00B341030076-0300-708170013902 ##)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/70

Butterfly valveconcentricWafer type EuronomicNBR rubber lined bodyStandard flange drilling toISO 7005-2, EN 1092-2:1997Blue Epoxy RAL 5017 80myClosing direction: CTCDN 50-250




21

137,00B3165076-0050-708070026902 #)144,00B3166576-0065-708070026902 #)158,00B4168076-0080-708070026902 #)195,00B51610076-0100-708070026902 #)250,00B61612576-0125-708070026902 #)411,00B131620076-0200-708070026902 #)936,00B251025076-0250-708070013902 ##)

Butterflyvalves


EN 593

65 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/71

Butterfly valveconcentricLug type EuronomicEPDM rubber lined bodyStandard flange drillingto ISO 7005-2, EN1092-2: 1997Blue Polyester RAL5017 80 myClosing direction: CTCDN 50-300



01

141,00B4165076-0050-718170026901 #)178,00B4166576-0065-718170026901 #)192,00B6168076-0080-718170026901 #)977,00B281025076-0250-718170013901 #)

1.224,00B381030076-0300-718170013901 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 76/71

Butterfly valveconcentricLug type EuronomicNBR rubber lined bodyStandard flange drillingto ISO 7005-2, EN1092-2: 1997Blue Polyester RAL5017 80 myClosing direction: CTCDN 50-300



02

141,00B4165076-0050-718070026901 #)178,00B4166576-0065-718070026901 #)501,00B161620076-0200-718070026901 #)977,00B281025076-0250-718070013901 #)

1.224,00B381030076-0300-718070013901 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/30

Butterfly valveconcentricSemi lug typeGGEPDM rubber linedbodyStandard flangedrilling to ISO7005-2, EN 1092-2:1997AVK coatingstandardClosing direction:CTCDN 50-200


003

295,00A3165075-050-3010410009 #)302,00A4166575-065-3010410009 #)309,00A4168075-080-3010410009 #)353,00A51610075-100-3010410009 #)391,00A71612575-125-3010410009 #)525,00A101615075-150-3010410009 #)699,00A141620075-200-3010410009 #)

Butterflyvalves


EN 593

66 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/30

Butterfly valveconcentricSemi lug typeGGNBR rubber linedbodyStandard flangedrilling to ISO7005-2, EN 1092-2:1997AVK coatingstandardClosing direction:CTCDN 50-300


013

295,00A3165075-050-3010210009 #)302,00A4166575-065-3010210009 #)309,00A4168075-080-3010210009 #)353,00A51610075-100-3010210009 #)391,00A71612575-125-3010210009 #)525,00A101615075-150-3010210009 #)699,00A141620075-200-3010210009 #)

1.327,00A241025075-250-3010200009 #)1.327,00A241625075-250-3010210009 #)1.327,00A241025075-250-3010400009 #)1.327,00A241625075-250-3010410009 #)1.632,00A361030075-300-3010200009 #)1.632,00A361630075-300-3010210009 #)1.632,00A361030075-300-3010400009 #)1.632,00A361630075-300-3010410009 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/40

Butterfly valveconcentricDouble flangedtypeISO 13GGEPDM rubber linedbodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600


003

638,00A8165075-050-4010410009 #)672,00A11168075-080-4010410009 #)765,00A131610075-100-4010410009 #)857,00A171612575-125-4010410009 #)

1.104,00A231615075-150-4010410009 #)1.378,00A321020075-200-4010400009 #)1.378,00A321620075-200-4010410009 #)2.218,00A501025075-250-4010400009 #)2.218,00A501025075-250-4010410009 #)2.218,00A501025075-250-4012400009 ##)2.585,00A651030075-300-4010400009 #)2.585,00A651030075-300-4010410009 #)2.523,00A651030075-300-4012400009 ##)2.523,00A651030075-300-4012410009 ##)3.648,00B951035075-350-4010400009 #)3.648,00B951035075-350-4010410009 #)3.346,00B951035075-350-4012400009 ##)3.346,00B951035075-350-4012410009 ##)5.997,00B1301040075-400-4010400009 #)5.997,00B1301040075-400-4010410009 #)5.335,00B1301040075-400-4012400009 ##)5.335,00B1301040075-400-4012410009 ##)8.537,00B1501045075-450-4010400009 #)8.537,00B1501045075-450-4010410009 #)6.792,00B1501045075-450-4012400009 ##)6.792,00B1501045075-450-4012410009 ##)9.182,00B2001050075-500-4010410009 #)7.371,00B2001050075-500-4012400009 ##)7.371,00B2001050075-500-4012410009 ##)

14.873,00B3001060075-600-4010400009 #)14.873,00B3001060075-600-4010410009 #)11.643,00B3001060075-600-4012400009 ##)11.643,00B3001060075-600-4012410009 ##)

Butterflyvalves


EN 593

67 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/40

Butterfly valveconcentricDouble flangedtypeISO 13GGNBR rubber linedbodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600


013

638,00A8165075-050-4010210009 #)672,00A9166575-065-4010210009 #)672,00A11168075-080-4010210009 #)765,00A131610075-100-4010210009 #)857,00A171612575-125-4010210009 #)

1.104,00A231615075-150-4010210009 #)1.378,00A321020075-200-4010200009 #)1.378,00A321620075-200-4010210009 #)2.218,00A501025075-250-4010200009 #)2.218,00A501025075-250-4010210009 #)2.585,00A651030075-300-4010200009 #)2.585,00A651030075-300-4010210009 #)3.648,00B951035075-350-4010200009 #)3.648,00B951035075-350-4010210009 #)5.997,00B1301040075-400-4010200009 #)5.997,00B1301040075-400-4010210009 #)8.537,00B1501045075-450-4010200009 #)8.537,00B1501045075-450-4010210009 #)9.182,00B2001050075-500-4010200009 #)9.182,00B2001050075-500-4010210009 #)

14.873,00B3001060075-600-4010200009 #)14.873,00B3001060075-600-4010210009 #)

Butterflyvalves


EN 593

68 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/40

Butterfly valveconcentricDouble flangedtypeISO 13GGNBR rubberlined bodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600


033

638,00A8165075-050-4010212009 #)672,00A9166575-065-4010212009 #)672,00A11168075-080-4010212009 #)765,00A131610075-100-4010212009 #)857,00A171612575-125-4010212009 #)


14.873,00B3001060075-600-4010202009 #)14.873,00B3001060075-600-4010212009 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/41

Butterfly valveconcentricDouble flangedtypeISO 13GGGNBR rubberlined bodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600


033

696,00A8165075-050-4110212009 #)741,00A9166575-065-4110212009 #)741,00A11168075-080-4110212009 #)864,00A131610075-100-4110212009 #)963,00A171612575-125-4110212009 #)


16.193,00B3001060075-600-4110202009 #)16.193,00B3001660075-600-4110212009 #)

Butterflyvalves

Products for gas according to EN593

EN 593

69 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/31

Butterfly valveconcentricSemi lug typeGGGNBR rubber linedbodyStandard flangedrilling to ISO7005-2, EN 1092-2:1997AVK coatingstandardClosing direction:CTCDN 50-300

Note:# Disc material in Alubronze

023

363,00A3165075-050-3113210009 #)377,00A4166575-065-3113210009 #)377,00A4168075-080-3113210009 #)425,00A51610075-100-3113210009 #)501,00A71612575-125-3113210009 #)658,00A101615075-150-3113210009 #)957,00A141620075-200-3113210009 #)

1.577,00A241025075-250-3113200009 #)1.577,00A241625075-250-3113210009 #)1.920,00A361030075-300-3113200009 #)1.920,00A361630075-300-3113210009 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/31

Butterfly valveconcentricSemi lug typeGGGNBR rubber linedbodyStandard flangedrilling to ISO7005-2, EN 1092-2:1997AVK coatingstandardClosing direction:CTCDN 50-300

Note:# Disc material in Duplex

024

408,00A3165075-050-3118210009 #)422,00A4166575-065-3118210009 #)425,00A4168075-080-3118210009 #)497,00A51610075-100-3118210009 #)579,00A71612575-125-3118210009 #)768,00A101615075-150-3118210009 #)

1.111,00A141620075-200-3118210009 #)1.985,00A241025075-250-3118200009 #)1.985,00A241625075-250-3118210009 #)2.383,00A361030075-300-3118200009 #)2.383,00A361630075-300-3118210009 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/41

Butterfly valveconcentricDouble flangedtypeISO 13GGGNBR rubber linedbodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600

Note:# Disc material in Alubronze## Disc material in Duplex

023

686,00A8165075-050-4113210009 #)723,00A8165075-050-4118210009 ##)734,00A9166575-065-4113210009 #)778,00A9166575-065-4118210009 ##)734,00A11168075-080-4113210009 #)782,00A11168075-080-4118210009 ##)843,00A131610075-100-4113210009 #)922,00A131610075-100-4118210009 ##)963,00A171612575-125-4113210009 #)

1.042,00A171612575-125-4118210009 ##)1.245,00A231615075-150-4113210009 #)1.358,00A231615075-150-4118210009 ##)1.646,00A321020075-200-4113200009 #)1.646,00A321620075-200-4113210009 #)1.800,00A321620075-200-4118200009 ##)1.800,00A321620075-200-4118210009 ##)2.397,00A501025075-250-4113200009 #)2.397,00A501625075-250-4113210009 #)2.801,00A501025075-250-4118200009 ##)2.801,00A501625075-250-4118210009 ##)2.791,00A651030075-300-4113200009 #)2.791,00A651630075-300-4113210009 #)3.257,00A651030075-300-4118200009 ##)3.257,00A651630075-300-4118210009 ##)4.210,00B951035075-350-4113200009 #)4.210,00B951635075-350-4113210009 #)

Butterflyvalves

Products for firefight according to EN593

EN 593

70 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

DN mm

AVK ref. nos.Type

Series 75/41

Butterfly valveconcentricDouble flangedtypeISO 13GGGNBR rubber linedbodyStandard flangedrilling to ISO7005-2, EN1092-2: 1997AVK coatingstandardClosing direction: CTCDN 50-600

Note:# Disc material in Alubronze## Disc material in Duplex

023

4.886,00B951035075-350-4118200009 ##)4.886,00B951035075-350-4118210009 ##)6.730,00B1301040075-400-4113200009 #)6.730,00B1301640075-400-4113210009 #)7.896,00B1301040075-400-4118200009 ##)7.896,00B1301640075-400-4118210009 ##)8.767,00B1501045075-450-4113200009 #)8.767,00B1501645075-450-4113210009 #)

10.553,00B1501045075-450-4118200009 ##)10.553,00B1501645075-450-4118210009 ##)10.224,00B2001050075-500-4113200009 #)10.224,00B2001650075-500-4113210009 #)11.246,00B2001050075-500-4118200009 ##)11.246,00B2001650075-500-4118210009 ##)16.570,00B3001060075-600-4113200009 #)16.570,00B3001660075-600-4113210009 #)19.049,00B3001060075-600-4118200009 ##)19.049,00B3001060075-600-4118210009 ##)

Butterflyvalves

Products for firefight according to EN593

EN 593

71 2007-07-10 10:47 CET

Designed to all standards ALL STD

.


Water

80/30, Surface Box forunderground fire hydrants acc.to DIN 4055, Housing in PA, Lid

73

80/31, Surface Box for gatevalves acc. to DIN 4056, Housingin PA, Lid in GG-20

73

80/32, Surface Box for serviceconn. valves acc. to DIN 4057,Housing in PA, Lid in GG-20

74

80/46, Support tile for surfaceboxes

74

730/4, UNI saddle head75

730/6, Stirrup Bush type75

731/09, Saddle head with flangedoutlet type UNI-FL

76

727/09, SWIC saddle withintegrated cutter forPE/PVC-pipes

76

602/00, Universal Supa stepcoupling, PN 16, Bolt Mild steel,PC2 = Sealing range

77

621/10, Supa Plus coupling withtensile resistant sealing ring forPE/uPVC-pipes, Bolt A2/Nut A4,

77

624/10, Supa Plus end cap,Tensile resistant forPVC/PE-pipes

77

603, Supa adaptor, PN 16, BoltA2/Nut A4, PC2 = sealing range

78

623/10, Supa Plus adaptor withtensile resistant sealing ring forPE/uPVC-pipes, Bolt A2/Nut A4,

78

729/10, Single band repair clamptype FS 10

79

729/18, Internal clamp 200 mmwidth

84

729/19, Internal clamp 400 mmwidth

84

729/2, Repair clamp type FSA84

729/20, Double band repairclamp type FS 20

90

729/28, External clamp 200 mmwidth

93

729/29, External clamp 400 mmwidth

93

729/3, Double/Triple band repairclamp type FST

94

729/30, Triple band repair clamptype FS 30

108

GAS

80/33, Surface Box for serviceconn. valves acc. to DIN 4059,Housing in PA, Lid in GG-20

112

80/34, Surface Box for gatevalves acc. to DIN 3581,Housing in PA, Lid in GG-20

112

80/35, Surface Box for gatevalves acc. to DIN 3582, Housingin PA, Lid in GG-20

112

80/46, Support tile for surfaceboxes

113

Gross priceEUR

Deliv.-code

Units pr.pallet


AVK ref. nos.Type

Series 80/30

Surface Box forunderground firehydrants acc. toDIN 4055Housing in PALid in GG-20

Note:# Standard

01

110,00A161480-30-03200 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


AVK ref. nos.Type

Series 80/30

Surface Box forunderground firehydrants acc. toDIN 4055Housing in PALid in GG-20

Note:# Height

adjustable

02

150,00A161680-30-13000 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


AVK ref. nos.Type

Series 80/31

Surface Box forgate valves acc.to DIN 4056Housing in PALid in GG-20

Note:# Standard

01

53,00A30680-31-03200 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


AVK ref. nos.Type

Series 80/31

Surface Box for gatevalves acc. to DIN 4056Housing in PALid in GG-20

Note:# Height adjustable

02

79,00A30680-31-13000 #)

Surface boxes

Products for water according to ALL STD.

ALL STD

.

73 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


AVK ref. nos.Type

Series 80/32

Surface Box for serviceconn. valves acc. to DIN4057Housing in PALid in GG-20

Note:# Standard

01

35,00A48380-32-03200 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


AVK ref. nos.Type

Series 80/32



02

51,00A48480-32-13000 #)

Gross priceEUR

Units pr.pallet


Deliv.-code

AVK ref. nos.Type

Series 80/46

Support tile forsurface boxes

Note:# With spindle

fixation. Fortype 80/31,80/32, 80/33and 80/34

01

8,00601A80-46-00001 #)

Gross priceEUR

Units pr.pallet


Deliv.-code

AVK ref. nos.Type

Series 80/46


Note:# For type 80/31,

80/32, 80/33and 80/34

02

8,001A80-46-00000 #)

Surface boxes


ALL STD

.

74 2007-07-10 10:47 CET

Gross priceEUR

Units pr.pallet


Deliv.-code

AVK ref. nos.Type

Series 80/46


Note:# For type 80/30

and 80/35

03

17,002A80-46-00005 #)

Gross priceEUR

Deliv.-code

Units pr.pallet

PN bar

DN/DNmm

AVK ref. nos.Type

Series 730/4

UNI saddle headEpoxy coatedaccording to DIN30677-2 andGSK guide lines

Note:# Excl. stirrup

01

69,00B1650-200730-4-050-100 #)69,00B1650-200730-4-050-200 #)69,00B1650-200730-4-050-300 #)69,00B1650-200730-4-050-400 #)69,00B1650-200730-4-050-500 #)

Gross priceEUR

Deliv.-code

Units pr.pallet

PN bar

DN/DNmm

AVK ref. nos.Type

Series 730/4

UNI saddle headEpoxy coatedaccording to DIN30677-2 andGSK guide lines


02

77,00B1680-300730-4-080-100 #)77,00B1680-300730-4-080-200 #)77,00B1680-300730-4-080-300 #)77,00B1680-300730-4-080-400 #)77,00B1680-300730-4-080-500 #)77,00B1680-300730-4-080-600 #)

Gross priceEUR

Deliv.-code

Units pr.pallet

Tmm

DN mm

AVK ref. nos.Type

Series 730/6

Stirrup BushtypeDN 50-300

001

43,00B50-8850730-6-088-02144,00B88-11880730-6-11802145,00B105-133100730-6-13302146,00B133-159125730-6-15902147,00B156-186150730-6-18602150,00B186-216175730-6-21602151,00B210-244200730-6-24402154,00B240-270225730-6-27002157,00B265-298250730-6-29802158,00B299-330275730-6-33002159,00B315-345300730-6-34502162,00B325-365300730-6-360021

Surface boxesTappingsaddles


ALL STD

.

75 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

DN2mm

AVK ref. nos.Type

Series 731/09

Saddle head withflanged outlet typeUNI-FLEpoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-300


00

104,00B88-36040731-0-9-000-03-00 #)120,00B88-36050731-0-9-000-03-01 #)154,00B105-13380731-0-9-000-04-03 #)154,00B133-15980731-0-9-000-05-03 #)161,00B156-18680731-0-9-000-06-03 #)192,00B156-186100731-0-9-000-06-04 #)206,00B210-24480731-0-9-000-07-03 #)237,00B210-244100731-0-9-000-07-04 #)313,00B210-244150731-0-9-000-07-06 #)206,00B265-29880731-0-9-000-08-03 #)237,00B265-298100731-0-9-000-08-04 #)313,00B265-298150731-0-9-000-08-06 #)213,00B315-34580731-0-9-000-09-03 #)246,00B315-345100731-0-9-000-09-04 #)322,00B315-345150731-0-9-000-09-06 #)

Gross priceEUR

Deliv.-code


PN bar

Dmm

AVK ref. nos.Type

Series 727/09

SWIC saddle withintegrated cutter forPE/PVC-pipesEpoxy coated according toDIN 30677-2 and GSKguide linesClosing direction: CTC

Note:# 1/2" BSP thread## 3/4" BSP thread### 1" BSP thread#### 1 1/4" BSP

thread##### 1 1/2" BSP thread###### 2" BSP thread

01

295,00B51650727-09-050-0120 #)295,00B51650727-09-050-0220 ##)295,00B51650727-09-0500320 ###)295,00B51650727-09-050-0420 ####)295,00B51663727-09-063-0120 #)295,00B51663727-09-063-0220 ##)295,00B51663727-09-0630320 ###)295,00B51663727-09-063-0420 ####)308,00B61675727-09-075-0120 #)308,00B61675727-09-075-0220 ##)308,00B61675727-09-0750320 ###)308,00B61675727-09-075-0420 ####)308,00B61675727-09-0750520 #####)308,00B61675727-09-075-0620 ######)323,00B61690727-09-090-0120 #)323,00B61690727-09-090-0220 ##)323,00B61690727-09-0900320 ###)323,00B61690727-09-090-0420 ####)323,00B61690727-09-0900520 #####)323,00B61690727-09-090-0620 ######)344,00B716110727-09-110-0120 #)344,00B716110727-09-110-0220 ##)344,00B716110727-09-1100320 ###)344,00B716110727-09-110-0420 ####)344,00B716110727-09-1100520 #####)344,00B716110727-09-110-0620 ######)359,00B816125727-09-125-0120 #)359,00B816125727-09-125-0220 ##)359,00B816125727-09-1250320 ###)359,00B816125727-09-125-0420 ####)359,00B816125727-09-1250520 #####)359,00B816125727-09-125-0620 ######)373,00B916140727-09-140-0120 #)373,00B916140727-09-140-0220 ##)373,00B916140727-09-1400320 ###)373,00B916140727-09-140-0420 ####)373,00B916140727-09-1400520 #####)373,00B916140727-09-140-0620 ######)409,00B1116160727-09-160-0120 #)409,00B1116160727-09-160-0220 ##)409,00B1116160727-09-1600320 ###)409,00B1116160727-09-160-0420 ####)409,00B1116160727-09-1600520 #####)409,00B1116160727-09-160-0620 ######)640,00B1416200727-09-200-0120 #)640,00B1416200727-09-200-0220 ##)640,00B1416200727-09-2000320 ###)640,00B1416200727-09-200-0420 ####)640,00B1416200727-09-2000520 #####)640,00B1416200727-09-200-0620 ######)660,00B1616225727-09-225-0120 #)660,00B1616225727-09-225-0220 ##)660,00B1616225727-09-2250320 ###)660,00B1616225727-09-225-0420 ####)660,00B1616225727-09-2250520 #####)660,00B1616225727-09-225-0620 ######)

Tappingsaddles


ALL STD

.

76 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


PN bar

PC3mm

AVK ref. nos.Type

Series 602/00

Universal Supastep couplingPN 16Bolt Mild steelPC2 = SealingrangeEPDM sealingsEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-400

001

194,00A14731657-74602-0630746400194,00A14741668-85602-0630856400194,00A14741668-85602-0740856400194,00A14751684-106602-0741066400264,00A14751684-106602-0851066400284,00A14751699-119602-1061196400284,00A147516109-133602-1061336400308,00A147616109-133602-1191336400308,00A147616132-157602-1191576400308,00A147616132-157602-1331576400318,00A147716157-183602-1331836400318,00A147816157-183602-1571836400318,00A147916176-201602-1832016400432,00A1471016193-215602-2012156400432,00A1471116218-242602-2012426400544,00A1471116218-242602-2152426400660,00A1471316242-268602-2152686400766,00A1471416242-268602-2422686400766,00A1471516266-292602-2682926400766,00A1471616280-306602-2923066400766,00A1471616301-327602-2923276400766,00A1471716324-350602-3273506400804,00A1471916352-378602-3273786400804,00A1472016352-378602-3503786400

1.053,00A1472116372-396602-37839664001.166,00A1472116384-410602-39641064001.638,00A1472216410-436602-41043664001.810,00A1472316436-462602-4364626400

Gross priceEUR

Deliv.-code


Dmm

DN mm

AVK ref. nos.Type

Series 621/10

Supa Pluscoupling withtensile resistantsealing ring forPE/uPVC-pipesBolt A2/Nut A4Min. GGG-40EPDM sealingsEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 32-300

001

106,00A34032621-10-04061115,00A35040621-10-05061124,00A46350621-10-06361133,00A47565621-10-07561153,00A59080621-10-09061166,00A7110100621-10-11061203,00A8125125621-10-12561213,00A9140125621-10-14061271,00A10160150621-10-16061383,00A10110150621-10-180-61496,00A16200200621-10-20061496,00A20225200621-10-22561705,00A28250250621-10-25061810,00A30280250621-10-28061

1.032,00A45315300621-10-31561

Gross priceEUR

Deliv.-code

PN bar

DN mm

AVK ref. nos.Type

Series 624/10

Supa Plus endcapTensile resistantforPVC/PE-pipesEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 32-300

Note:# 1 1/4" BSP thread, In line, Bolts A2, Nut

A4## 2" BSP thread, In line, Bolts A2, Nut A4

/10

130,00A1632624-10-0406100041 #)130,00A1640624-10-0506100041 #)142,00A1650624-10-0636100041 #)142,00A1650624-10-0636100061 ##)149,00A1665624-10-0756100041 #)149,00A1665624-10-0756100061 ##)154,00A1680624-10-0906100041 #)154,00A1680624-10-0906100061 ##)199,00A16100624-10-1106100041 #)199,00A16100624-10-1106100061 ##)223,00A16125624-10-1256100041 #)223,00A16125624-10-1256100061 ##)234,00A16125624-10-1406100041 #)234,00A16125624-10-1406100061 ##)248,00A16150624-10-1606100041 #)248,00A16150624-10-1606100061 ##)286,00A16150624-10-1806100041 #)286,00A16150624-10-1806100061 ##)331,00A16200624-10-2006100041 #)331,00A16200624-10-2006100061 ##)489,00A16200624-10-2256100041 #)

Couplings


ALL STD

.

77 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

PN bar

DN mm

AVK ref. nos.Type

Series 624/10

Supa Plus endcapTensile resistantforPVC/PE-pipesEPDM rubberwedgeEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 32-300

Note:# 1 1/4" BSP thread, In line, Bolts A2, Nut

A4## 2" BSP thread, In line, Bolts A2, Nut A4

/10

489,00A16200624-10-2256100061 ##)578,00A16250624-10-2506100041 #)578,00A16250624-10-2506100061 ##)702,00A16250624-10-2806100041 #)702,00A16250624-10-2806100061 ##)815,00A16300624-10-3156100041 #)815,00A16300624-10-3156100061 ##)

Gross priceEUR

Deliv.-code


PC2mm

DN mm

AVK ref. nos.Type

Series 603

Supa adaptorPN 16Bolt A2/Nut A4PC2 = sealingrangeEPDM sealingsEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-400

Note:# Universal drilling PN 10/16. Info on ANSI/

BS drilling see data sheet.

001

112,00A446-6340603-063-0006400 #)113,00A457-7450603-074-0006400 #)164,00A457-7450603-074-0016400 #)164,00A468-8550603-085-0006400 #)130,00A584-10680603-106-0006400 #)146,00A584-10680603-106-0016400 #)146,00A699-119100603-119-0006400 #)146,00A6109-133100603-133-0006400 #)286,00A7109-133100603-133-0016400 #)286,00A8132-157125603-157-0006400 #)286,00A8157-183150603-183-0006400 #)216,00A10176-201150603-201-0006400 #)407,00A12193-215200603-215-0006400 #)354,00A12218-242200603-242-0006400 #)518,00A17242-268250603-268-0006400 #)518,00A18266-292250603-292-0006400 #)518,00A19280-306250603-306-0006400 #)580,00A22301-327300603-327-0006400 #)580,00A24324-350300603-350-0006400 #)866,00A25352-378350603-378-0006400 #)866,00A29372-396350603-396-0006400 #)866,00A29384-410350603-410-0006400 #)

1.410,00A35410-436400603-436-0006400 #)1.410,00A37436-462400603-462-0006400 #)

Gross priceEUR

Deliv.-code


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 623/10

Supa Plusadaptor withtensile resistantsealing ring forPE/uPVC-pipesBolt A2/Nut A4Min. GGG-40EPDM sealingsEpoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-300

Note:# 10/16 = Universal drilling, incl. EPDM

flange gasket## Incl. EPDM flange gasket

001

94,00A410/164040623-10-0406161 #)94,00A410/165040623-10-0506161 #)

114,00A410/166350623-10-0636161 #)114,00A510/167565623-10-0756161 #)132,00A510/169080623-10-0906161 #)145,00A710/16110100623-10-1106161 #)192,00A710/16125125623-10-1256161 #)192,00A710/16140125623-10-1406161 #)233,00A810/16160150623-10-1606161 #)279,00A1010/16285150623-10-180-6161 #)387,00A1416200200623-10-2006161 ##)391,00A1516225200623-10-2256161 ##)536,00A2510/16250250623-10-2506161 #)617,00A2510/16280250623-10-2806161 #)808,00A2910/16315300623-10-3156161 #)

Couplings

Flangeadaptors


ALL STD

.

78 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/10

Single bandrepair clamptype FS 10NBR sealings

Note:# AISI 304

05

53,00A48-52100729-0052-1005 #)68,00A48-52150729-0052-1105 #)80,00A48-52200729-0052-1205 #)

111,00B48-52250729-0052-1305 #)123,00B48-52300729-0052-1405 #)168,00B48-52400729-0052-1505 #)53,00B54-58100729-0058-1005 #)68,00A54-58150729-0058-1105 #)80,00A54-58200729-0058-1205 #)

112,00B54-58250729-0058-1305 #)123,00B54-58300729-0058-1405 #)170,00B54-58400729-0058-1505 #)54,00A60-67100729-0067-1005 #)69,00A60-67150729-0067-1105 #)80,00A60-67200729-0067-1205 #)

112,00B60-67250729-0067-1305 #)123,00A60-67300729-0067-1405 #)170,00B60-67400729-0067-1505 #)220,00B60-67500729-0067-1605 #)54,00B67-74100729-0074-1005 #)81,00A67-74200729-0074-1205 #)

116,00B67-74250729-0074-1305 #)127,00B67-74300729-0074-1405 #)175,00B67-74400729-0074-1505 #)223,00B67-74500729-0074-1605 #)54,00A70-77100729-0077-1005 #)71,00A70-77150729-0077-1105 #)83,00A70-77200729-0077-1205 #)

116,00B70-77250729-0077-1305 #)127,00B70-77300729-0077-1405 #)172,00B70-77400729-0077-1505 #)225,00B70-77500729-0077-1605 #)54,00A73-80100729-0080-1005 #)71,00B73-80150729-0080-1105 #)83,00A73-80200729-0080-1205 #)

116,00B73-80250729-0080-1305 #)129,00A73-80300729-0080-1405 #)173,00B73-80400729-0080-1505 #)227,00B73-80500729-0080-1605 #)56,00B76-83100729-0083-1005 #)72,00A76-83150729-0083-1105 #)84,00A76-83200729-0083-1205 #)

117,00B76-83250729-0083-1305 #)129,00B76-83300729-0083-1405 #)173,00B76-83400729-0083-1505 #)229,00B76-83500729-0083-1605 #)56,00B82-89100729-0089-1005 #)72,00B82-89150729-0089-1105 #)84,00A82-89200729-0089-1205 #)

117,00B82-89250729-0089-1305 #)130,00A82-89300729-0089-1405 #)176,00B82-89400729-0089-1505 #)230,00B82-89500729-0089-1605 #)56,00B87-94100729-0094-1005 #)72,00B87-94150729-0094-1105 #)86,00A87-94200729-0094-1205 #)

118,00B87-94250729-0094-1305 #)132,00A87-94300729-0094-1405 #)176,00B87-94400729-0094-1505 #)231,00B87-94500729-0094-1605 #)56,00B91-98100729-0098-1005 #)72,00B91-98150729-0098-1105 #)86,00B89-98200729-0098-1205 #)

118,00B91-98250729-0098-1305 #)132,00B91-98300729-0098-1405 #)178,00B91-98400729-0098-1505 #)234,00B91-98500729-0098-1605 #)56,00B95-102100729-0102-1005 #)74,00B95-102150729-0102-1105 #)89,00A95-102200729-0102-1205 #)

136,00A95-102300729-0102-1405 #)182,00B95-102400729-0102-1505 #)237,00B95-102500729-0102-1605 #)56,00B98-108100729-0108-1005 #)72,00B98-108150729-0108-1105 #)87,00B98-108200729-0108-1205 #)

121,00B98-108250729-0108-1305 #)133,00B98-108300729-0108-1405 #)179,00B98-108400729-0108-1505 #)240,00B98-108500729-0108-1605 #)57,00B88-110100729-0112-1005 #)74,00B102-112150729-0112-1105 #)

Repair clam

ps


ALL STD

.

79 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/10


Note:# AISI 304

05

124,00B102-112250729-0112-1305 #)183,00B102-112400729-0112-1505 #)243,00B102-112500729-0112-1605 #)75,00B106-116150729-0116-1105 #)

127,00B106-116250729-0116-1305 #)189,00B106-116400729-0116-1505 #)245,00B106-116500729-0116-1605 #)59,00B108-118100729-0118-1005 #)

189,00B108-118400729-0118-1505 #)249,00B108-118500729-0118-1605 #)59,00B113-123100729-0123-1005 #)75,00B113-123150729-0123-1105 #)

192,00B113-123400729-0123-1505 #)251,00B113-123500729-0123-1605 #)59,00B118-128100729-0128-1005 #)75,00B118-128150729-0128-1105 #)

129,00B118-128250729-0128-1305 #)197,00B118-128400729-0128-1505 #)252,00B118-128500729-0128-1605 #)59,00B120-131100729-0131-1005 #)77,00B120-131150729-0131-1105 #)

131,00B120-131250729-0131-1305 #)203,00B120-131400729-0131-1505 #)254,00B120-131500729-0131-1605 #)161,00B114-134200729-0134-2205 #)59,00B125-135100729-0135-1005 #)77,00B125-135150729-0135-1105 #)95,00B125-135200729-0135-1205 #)

129,00B125-135250729-0135-1305 #)145,00B125-135300729-0135-1405 #)203,00B125-135400729-0135-1505 #)256,00B125-135500729-0135-1605 #)60,00B132-142100729-0142-1005 #)80,00B132-142150729-0142-1105 #)96,00B132-142200729-0142-1205 #)

134,00B132-142250729-0142-1305 #)208,00B132-142400729-0142-1505 #)257,00B132-142500729-0142-1605 #)60,00B135-145100729-0145-1005 #)78,00B135-145150729-0145-1105 #)

133,00B135-145250729-0145-1305 #)204,00B135-145400729-0145-1505 #)260,00B135-145500729-0145-1605 #)62,00B145-155100729-0155-1005 #)80,00B145-155150729-0155-1105 #)

136,00B145-155250729-0155-1305 #)151,00B145-155300729-0155-1405 #)204,00B145-155400729-0155-1505 #)259,00B145-155500729-0155-1605 #)63,00B151-161100729-0161-1005 #)83,00B151-161150729-0161-1105 #)

101,00B151-161200729-0161-1205 #)140,00B151-161250729-0161-1305 #)209,00B151-161400729-0161-1505 #)267,00B151-161500729-0161-1605 #)319,00B151-161600729-0161-1705 #)63,00B159-170100729-0170-1005 #)83,00B159-170150729-0170-1105 #)

139,00B159-170250729-0170-1305 #)209,00B159-170400729-0170-1505 #)318,00B159-170600729-0170-1705 #)65,00B165-175100729-0175-1005 #)

104,00B165-175200729-0175-1205 #)215,00B165-175400729-0175-1505 #)271,00B165-175500729-0175-1605 #)327,00B165-175600729-0175-1705 #)66,00B167-177100729-0177-1005 #)87,00B167-177150729-0177-1105 #)

143,00A167-177250729-0177-1305 #)160,00B167-177300729-0177-1405 #)217,00B167-177400729-0177-1505 #)274,00B167-177500729-0177-1605 #)328,00B167-177600729-0177-1705 #)66,00B170-180100729-0180-1005 #)86,00B170-180150729-0180-1105 #)

102,00B170-180200729-0180-1205 #)142,00B170-180250729-0180-1305 #)159,00B170-180300729-0180-1405 #)215,00B170-180400729-0180-1505 #)271,00B170-180500729-0180-1605 #)324,00B170-180600729-0180-1705 #)66,00B174-184100729-0184-1005 #)

Repair clam

ps


ALL STD

.

80 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/10


Note:# AISI 304

05

87,00B174-184150729-0184-1105 #)105,00B174-184200729-0184-1205 #)145,00B174-184250729-0184-1305 #)163,00B174-184300729-0184-1405 #)220,00B174-184400729-0184-1505 #)277,00B174-184500729-0184-1605 #)331,00B174-184600729-0184-1705 #)68,00B176-186100729-0186-1005 #)89,00B176-186150729-0186-1105 #)

146,00B176-186250729-0186-1305 #)164,00B176-186300729-0186-1405 #)221,00B176-186400729-0186-1505 #)279,00B176-186500729-0186-1605 #)334,00B176-186600729-0186-1705 #)68,00B180-190100729-0190-1005 #)87,00B180-190150729-0190-1105 #)

107,00B180-190200729-0190-1205 #)145,00B180-190250729-0190-1305 #)163,00B180-190300729-0190-1405 #)221,00B180-190400729-0190-1505 #)277,00B180-190500729-0190-1605 #)335,00B180-190600729-0190-1705 #)68,00B186-196100729-0196-1005 #)90,00B186-196150729-0196-1105 #)

110,00B186-196200729-0196-1205 #)149,00B186-196250729-0196-1305 #)167,00B186-196300729-0196-1405 #)227,00B186-196400729-0196-1505 #)286,00B186-196500729-0196-1605 #)345,00B186-196600729-0196-1705 #)69,00B193-203100729-0203-1005 #)90,00B193-203150729-0203-1105 #)

110,00B193-203200729-0203-1205 #)150,00B193-203250729-0203-1305 #)169,00B193-203300729-0203-1405 #)227,00B193-203400729-0203-1505 #)286,00B193-203500729-0203-1605 #)343,00B193-203600729-0203-1705 #)71,00B200-210100729-0210-1005 #)93,00B200-210150729-0210-1105 #)

113,00B200-210200729-0210-1205 #)154,00B200-210250729-0210-1305 #)235,00B200-210400729-0210-1505 #)297,00B200-210500729-0210-1605 #)354,00B200-210600729-0210-1705 #)72,00B209-220100729-0220-1005 #)93,00B209-220150729-0220-1105 #)

112,00B209-220200729-0220-1205 #)154,00B209-220250729-0220-1305 #)173,00B209-220300729-0220-1405 #)234,00B209-220400729-0220-1505 #)295,00B209-220500729-0220-1605 #)354,00B209-220600729-0220-1705 #)72,00B215-225100729-0225-1005 #)96,00B215-225150729-0225-1105 #)

178,00A215-225300729-0225-1405 #)241,00B215-225400729-0225-1505 #)303,00B215-225500729-0225-1605 #)365,00B215-225600729-0225-1705 #)74,00B219-229100729-0229-1005 #)96,00B219-229150729-0229-1105 #)

116,00B219-229200729-0229-1205 #)157,00B219-229250729-0229-1305 #)176,00B219-229300729-0229-1405 #)240,00B219-229400729-0229-1505 #)299,00B219-229500729-0229-1605 #)361,00B219-229600729-0229-1705 #)75,00B222-233100729-0233-1005 #)

101,00B222-233150729-0233-1105 #)118,00B222-233200729-0233-1205 #)159,00B222-233250729-0233-1305 #)179,00B222-233300729-0233-1405 #)246,00B222-233400729-0233-1505 #)308,00B222-233500729-0233-1605 #)367,00B222-233600729-0233-1705 #)77,00B229-239100729-0239-1005 #)

102,00B228-239150729-0239-1105 #)120,00B228-239200729-0239-1205 #)161,00B228-239250729-0239-1305 #)182,00B228-239300729-0239-1405 #)250,00B228-239400729-0239-1505 #)313,00B228-239500729-0239-1605 #)

Repair clam

ps


ALL STD

.

81 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/10


Note:# AISI 304

05

373,00B228-239600729-0239-1705 #)78,00B230-240100729-0240-1005 #)

104,00B230-240150729-0240-1105 #)124,00B230-240200729-0240-1205 #)163,00B230-240250729-0240-1305 #)184,00B230-240300729-0240-1405 #)256,00B230-240400729-0240-1505 #)318,00B230-240500729-0240-1605 #)375,00B230-240600729-0240-1705 #)80,00B237-247100729-0247-1005 #)

104,00B237-247150729-0247-1105 #)124,00B237-247200729-0247-1205 #)163,00B237-247250729-0247-1305 #)183,00B237-247300729-0247-1405 #)256,00B237-247400729-0247-1505 #)318,00B237-247500729-0247-1605 #)373,00B237-247600729-0247-1705 #)81,00B239-249100729-0249-1005 #)

107,00B239-249150729-0249-1105 #)130,00B239-249200729-0249-1205 #)169,00B239-249250729-0249-1305 #)190,00B239-249300729-0249-1405 #)267,00B239-249400729-0249-1505 #)328,00B239-249500729-0249-1605 #)384,00B239-249600729-0249-1705 #)83,00B243-254100729-0254-1005 #)

107,00B243-254150729-0254-1105 #)130,00B243-254200729-0254-1205 #)169,00B243-254250729-0254-1305 #)192,00B243-254300729-0254-1405 #)327,00B243-254500729-0254-1605 #)385,00B243-254600729-0254-1705 #)86,00B250-260100729-0260-1005 #)

114,00B250-260150729-0260-1105 #)136,00B250-260200729-0260-1205 #)181,00B250-260250729-0260-1305 #)202,00B250-260300729-0260-1405 #)274,00B250-260400729-0260-1505 #)339,00B250-260500729-0260-1605 #)399,00B250-260600729-0260-1705 #)86,00B252-263100729-0263-1005 #)

112,00B252-263150729-0263-1105 #)135,00B252-263200729-0263-1205 #)179,00B252-263250729-0263-1305 #)200,00B252-263300729-0263-1405 #)274,00B252-263400729-0263-1505 #)337,00B252-262500729-0263-1605 #)400,00B252-263600729-0263-1705 #)87,00B261-271100729-0271-1005 #)

116,00B261-271150729-0271-1105 #)139,00B261-271200729-0271-1205 #)184,00B261-271250729-0271-1305 #)206,00B261-271300729-0271-1405 #)283,00B261-271400729-0271-1505 #)348,00B261-271500729-0271-1605 #)414,00B261-271600729-0271-1705 #)89,00B266-276100729-0276-1005 #)

116,00B266-276150729-0276-1105 #)139,00B266-276200729-0276-1205 #)182,00B266-276250729-0276-1305 #)204,00B266-276300729-0276-1405 #)281,00B266-276400729-0276-1505 #)347,00B266-276500729-0276-1605 #)415,00B266-276600729-0276-1705 #)89,00B270-280100729-0280-1005 #)

119,00B270-280150729-0280-1105 #)187,00B270-280250729-0280-1305 #)214,00B270-280300729-0280-1405 #)292,00B270-280400729-0280-1505 #)357,00B270-280500729-0280-1605 #)429,00B270-280600729-0280-1705 #)90,00B273-283100729-0283-1005 #)

118,00B273-283150729-0283-1105 #)144,00B273-283200729-0283-1205 #)186,00B273-283250729-0283-1305 #)210,00B273-283300729-0283-1405 #)289,00B273-283400729-0283-1505 #)357,00B273-283500729-0283-1605 #)429,00B273-283600729-0283-1705 #)93,00B280-291100729-0291-1005 #)

121,00B281-291150729-0291-1105 #)147,00B280-291200729-0291-1205 #)

Repair clam

ps


ALL STD

.

82 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/10


Note:# AISI 304

05

192,00B280-291250729-0291-1305 #)218,00B280-291300729-0291-1405 #)293,00B280-291400729-0291-1505 #)363,00B280-291500729-0291-1605 #)437,00B280-291600729-0291-1705 #)93,00B290-300100729-0300-1005 #)

123,00B290-300150729-0300-1105 #)148,00B290-300200729-0300-1205 #)195,00B290-300250729-0300-1305 #)222,00B290-300300729-0300-1405 #)297,00B290-300400729-0300-1505 #)367,00B290-300500729-0300-1605 #)444,00B290-300600729-0300-1705 #)126,00B300-310150729-0310-1105 #)154,00B300-310200729-0310-1205 #)202,00B300-310250729-0310-1305 #)229,00B300-310300729-0310-1405 #)306,00B300-310400729-0310-1505 #)378,00B300-310500729-0310-1605 #)459,00B300-310600729-0310-1705 #)126,00B310-320150729-0320-1105 #)154,00B310-320200729-0320-1205 #)201,00B310-320250729-0320-1305 #)228,00B310-320300729-0320-1405 #)303,00B310-320400729-0320-1505 #)376,00B310-320500729-0320-1605 #)456,00B310-320600729-0320-1705 #)130,00B315-325150729-0325-1105 #)158,00B315-325200729-0325-1205 #)234,00B315-325300729-0325-1405 #)312,00B315-325400729-0325-1505 #)390,00B315-325500729-0325-1605 #)467,00B315-325600729-0325-1705 #)129,00B320-330150729-0330-1105 #)157,00B320-330200729-0330-1205 #)204,00B320-330250729-0330-1305 #)231,00B320-330300729-0330-1405 #)309,00B320-330400729-0330-1505 #)386,00B320-330500729-0330-1605 #)465,00B320-330600729-0330-1705 #)160,00B325-335200729-0335-1205 #)209,00B325-335250729-0335-1305 #)238,00B325-335300729-0335-1405 #)318,00B325-335400729-0335-1505 #)398,00B325-335500729-0335-1605 #)477,00B325-335600729-0335-1705 #)159,00B334-344200729-0344-1205 #)209,00B334-344250729-0344-1305 #)237,00B334-344300729-0344-1405 #)315,00B334-344400729-0344-1505 #)397,00B334-344500729-0344-1605 #)474,00B334-344600729-0344-1705 #)160,00B340-350200729-0350-1205 #)212,00B340-350250729-0350-1305 #)238,00B340-350300729-0350-1405 #)318,00B340-350400729-0350-1505 #)400,00B340-350500729-0350-1605 #)477,00B340-350600729-0350-1705 #)163,00B350-360200729-0360-1205 #)215,00B350-360250729-0360-1305 #)241,00B350-360300729-0360-1405 #)321,00B350-360400729-0360-1505 #)403,00B350-360500729-0360-1605 #)481,00B350-360600729-0360-1705 #)

Repair clam

ps


ALL STD

.

83 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

DN mm

AVK ref. nos.Type

Series 729/18

Internal clamp200 mm widthNBR sealingsDN 600-2000

02

1.467,00B600729-0600-18021.604,00B700729-0700-18021.742,00B800729-0800-18021.879,00B900729-0900-18022.017,00B1000729-1000-18022.223,00B1100729-1100-18022.452,00B1200729-1200-18022.681,00B1300729-1300-18022.911,00B1400729-1400-18023.140,00B1500729-1500-18023.346,00B1600729-1600-18023.575,00B1700729-1700-18023.804,00B1800729-1800-18024.034,00B1900729-1900-18024.263,00B2000729-2000-1802

Gross priceEUR

Deliv.-code

DN mm

AVK ref. nos.Type

Series 729/19

Internal clamp400 mm widthNBR sealingsDN 600-2000

02


Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/2

Repair clamptype FSANBR sealings

Note:# AISI 304, 1"

BSP thread,Available onrequest:1/2"-3"BSP thread

10510

108,00B48-52100729-2052-100510 #)123,00B48-52150729-2052-110510 #)135,00B48-52200729-2052-120510 #)166,00B48-52250729-2052-130510 #)178,00B48-52300729-2052-140510 #)223,00B48-52400729-2052-150510 #)108,00B54-58100729-2058-100510 #)135,00B54-58150729-2058-110510 #)123,00B54-58200729-2058-120510 #)167,00B54-58250729-2058-130510 #)178,00B54-58300729-2058-140510 #)225,00B54-58400729-2058-150510 #)109,00B60-67100729-2067-100510 #)124,00B60-67150729-2067-110510 #)135,00B60-67200729-2067-120510 #)167,00B60-67250729-2067-130510 #)178,00B60-67300729-2067-140510 #)225,00B60-67400729-2067-150510 #)275,00B60-67500729-2067-160510 #)109,00B67-74100729-2074-100510 #)126,00B67-74150729-2074-110510 #)136,00B67-74200729-2074-120510 #)171,00B67-74250729-2074-130510 #)182,00B67-74300729-2074-140510 #)230,00B67-74400729-2074-150510 #)278,00B67-74500729-2074-160510 #)109,00B70-77100729-2077-100510 #)126,00B70-77150729-2077-110510 #)138,00B70-77200729-2077-120510 #)171,00B70-77250729-2077-130510 #)182,00B70-77300729-2077-140510 #)227,00B70-77400729-2077-150510 #)280,00B70-77500729-2077-160510 #)109,00B73-80100729-2080-100510 #)

Repair clam

ps


ALL STD

.

84 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/2


Note:# AISI 304, 1"


10510

126,00B73-80150729-2080-110510 #)138,00B73-80200729-2080-120510 #)171,00B73-80250729-2080-130510 #)184,00B73-80300729-2080-140510 #)228,00B73-80400729-2080-150510 #)282,00B73-80500729-2080-160510 #)111,00B76-83100729-2083-100510 #)127,00B76-83150729-2083-110510 #)139,00B76-83200729-2083-120510 #)172,00B76-83250729-2083-130510 #)184,00B76-83300729-2083-140510 #)228,00B76-83400729-2083-150510 #)284,00B76-83500729-2083-160510 #)111,00B82-89100729-2089-100510 #)127,00B82-89150729-2089-110510 #)139,00B82-89200729-2089-120510 #)172,00B82-89250729-2089-130510 #)185,00B82-89300729-2089-140510 #)231,00B82-89400729-2089-150510 #)285,00B82-89500729-2089-160510 #)111,00B87-94100729-2094-100510 #)127,00B87-94150729-2094-110510 #)141,00B87-94200729-2094-120510 #)173,00B87-94250729-2094-130510 #)187,00B87-94300729-2094-140510 #)231,00B87-94400729-2094-150510 #)286,00B87-94500729-2094-160510 #)111,00B91-98100729-2098-100510 #)127,00B91-98150729-2098-110510 #)141,00B89-98200729-2098-120510 #)173,00B91-98250729-2098-130510 #)187,00B91-98300729-2098-140510 #)233,00B91-98400729-2098-150510 #)289,00B91-98500729-2098-160510 #)111,00B95-102100729-2102-100510 #)129,00B95-102150729-2102-110510 #)144,00B95-102200729-2102-120510 #)179,00B95-102250729-2102-130510 #)191,00B95-102300729-2102-140510 #)237,00B95-102400729-2102-150510 #)292,00B95-102500729-2102-160510 #)111,00B98-108100729-2108-100510 #)127,00B98-108150729-2108-110510 #)142,00B98-108200729-2108-120510 #)176,00B98-108250729-2108-130510 #)188,00B98-108300729-2108-140510 #)234,00B98-108400729-2108-150510 #)295,00B98-108500729-2108-160510 #)112,00B88-110100729-2112-100510 #)129,00B102-112150729-2112-110510 #)145,00B102-112200729-2112-120510 #)179,00B102-112250729-2112-130510 #)191,00B102-112300729-2112-140510 #)238,00B102-112400729-2112-150510 #)298,00B102-112500729-2112-160510 #)112,00B106-116100729-2116-100510 #)130,00B106-116150729-2116-110510 #)147,00B106-116200729-2116-120510 #)182,00B106-116250729-2116-130510 #)196,00B106-116300729-2116-140510 #)244,00B106-116400729-2116-150510 #)300,00B106-116500729-2116-160510 #)114,00B108-118100729-2118-100510 #)130,00B108-118150729-2118-110510 #)147,00B108-118200729-2118-120510 #)182,00B108-118250729-2118-130510 #)196,00B108-118300729-2118-140510 #)244,00B108-118400729-2118-150510 #)304,00B108-118500729-2118-160510 #)114,00B113-123100729-2123-100510 #)130,00B113-123150729-2123-110510 #)147,00B113-123200729-2123-120510 #)184,00B113-123250729-2123-130510 #)197,00B113-123300729-2123-140510 #)247,00B113-123400729-2123-150510 #)306,00B113-123500729-2123-160510 #)114,00B118-128100729-2128-100510 #)130,00B118-128150729-2128-110510 #)145,00B118-128200729-2128-120510 #)184,00B118-128250729-2128-130510 #)199,00B118-128300729-2128-140510 #)252,00B118-128400729-2128-150510 #)

Repair clam

ps


ALL STD

.

85 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/2


Note:# AISI 304, 1"


10510


Repair clam

ps


ALL STD

.

86 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/2


Note:# AISI 304, 1"


10510


Repair clam

ps


ALL STD

.

87 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/2


Note:# AISI 304, 1"


10510


Repair clam

ps


ALL STD

.

88 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/2


Note:# AISI 304, 1"


10510

202,00B280-291200729-2291-120510 #)247,00B280-291250729-2291-130510 #)273,00B280-291300729-2291-140510 #)348,00B280-291400729-2291-150510 #)418,00B280-291500729-2291-160510 #)492,00B280-291600729-2291-170510 #)148,00B290-300100729-2300-100510 #)178,00B290-300150729-2300-110510 #)203,00B290-300200729-2300-120510 #)250,00B290-300250729-2300-130510 #)277,00B290-300300729-2300-140510 #)352,00B290-300400729-2300-150510 #)422,00B290-300500729-2300-160510 #)499,00B290-300600729-2300-170510 #)181,00B300-310150729-2310-110510 #)209,00B300-310200729-2310-120510 #)257,00B300-310250729-2310-130510 #)284,00B300-310300729-2310-140510 #)361,00B300-310400729-2310-150510 #)433,00B300-310500729-2310-160510 #)514,00B300-310600729-2310-170510 #)181,00B310-320150729-2320-110510 #)209,00B310-320200729-2320-120510 #)256,00B310-320250729-2320-130510 #)283,00B310-320300729-2320-140510 #)358,00B310-320400729-2320-150510 #)431,00B310-320500729-2320-160510 #)511,00B310-320600729-2320-170510 #)185,00B315-325150729-2325-110510 #)213,00B315-325200729-2325-120510 #)261,00B315-325250729-2325-130510 #)289,00B315-325300729-2325-140510 #)367,00B315-325400729-2325-150510 #)445,00B315-325500729-2325-160510 #)522,00B315-325600729-2325-170510 #)184,00B320-330150729-2330-110510 #)212,00B320-330200729-2330-120510 #)259,00B320-330250729-2330-130510 #)286,00B320-330300729-2330-140510 #)364,00B320-330400729-2330-150510 #)441,00B320-330500729-2330-160510 #)520,00B320-330600729-2330-170510 #)215,00B325-335200729-2335-120510 #)264,00B325-335250729-2335-130510 #)293,00B325-335300729-2335-140510 #)373,00B325-335400729-2335-150510 #)453,00B325-335500729-2335-160510 #)532,00B325-335600729-2335-170510 #)214,00B334-344200729-2344-120510 #)264,00B334-344250729-2344-130510 #)292,00B334-344300729-2344-140510 #)370,00B334-344400729-2344-150510 #)452,00B334-344500729-2344-160510 #)529,00B334-344600729-2344-170510 #)215,00B340-350200729-2350-120510 #)267,00B340-350250729-2350-130510 #)293,00B340-350300729-2350-140510 #)373,00B340-350400729-2350-150510 #)455,00B340-350500729-2350-160510 #)532,00B340-350600729-2350-170510 #)218,00B350-360200729-2360-120510 #)270,00B350-360250729-2360-130510 #)296,00B350-360300729-2360-140510 #)376,00B350-360400729-2360-150510 #)458,00B350-360500729-2360-160510 #)536,00B350-360600729-2360-170510 #)

Repair clam

ps


ALL STD

.

89 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/20

Double bandrepair clamptype FS 20NBR sealings

Note:# AISI 304

05

A88-110200729-0110-2205 #)215,00A88-110250729-0110-2305 #)237,00A88-110300729-0110-2405 #)321,00B88-110400729-0110-2505 #)405,00B88-110500729-0110-2605 #)490,00B88-110600729-0110-2705 #)157,00B100-120200729-0120-2205 #)221,00B100-120250729-0120-2305 #)244,00B100-120300729-0120-2405 #)328,00B100-120400729-0120-2505 #)416,00B100-120500729-0120-2605 #)501,00B100-120600729-0120-2705 #)156,00A108-128200729-0128-2205 #)219,00A108-128250729-0128-2305 #)240,00A108-128300729-0128-2405 #)326,00B108-128400729-0128-2505 #)410,00B108-128500729-0128-2605 #)494,00B108-128600729-0128-2705 #)224,00B114-134250729-0134-2305 #)247,00B114-134300729-0134-2405 #)334,00B114-134400729-0134-2505 #)422,00B114-134500729-0134-2605 #)507,00B114-134600729-0134-2705 #)164,00B120-140200729-0140-2205 #)226,00B120-140250729-0140-2305 #)250,00B120-140300729-0140-2405 #)337,00B120-140400729-0140-2505 #)426,00B120-140500729-0140-2605 #)515,00B120-140600729-0140-2705 #)163,00B130-150200729-0150-2205 #)224,00B130-150250729-0150-2305 #)247,00B130-150300729-0150-2405 #)333,00B130-150400729-0150-2505 #)420,00B130-150500729-0150-2605 #)508,00B130-150600729-0150-2705 #)169,00B135-155200729-0155-2205 #)227,00B135-155250729-0155-2305 #)251,00B135-155300729-0155-2405 #)340,00B135-155400729-0155-2505 #)429,00B135-155500729-0155-2605 #)518,00B135-155600729-0155-2705 #)225,00A140-160250729-0160-2305 #)249,00A140-160300729-0160-2405 #)336,00B140-160400729-0160-2505 #)425,00B140-160500729-0160-2605 #)546,00B140-160600729-0160-2705 #)229,00A159-180250729-0180-2305 #)255,00A159-180300729-0180-2405 #)343,00A159-180400729-0180-2505 #)434,00B159-180500729-0180-2605 #)523,00B159-180600729-0180-2705 #)172,00A165-185200729-0185-2205 #)232,00B165-185250729-0185-2305 #)345,00B165-185400729-0185-2505 #)435,00B165-185500729-0185-2605 #)524,00B165-185600729-0185-2705 #)175,00B168-189200729-0189-2205 #)240,00B168-189250729-0189-2305 #)264,00B168-189300729-0189-2405 #)351,00B168-189400729-0189-2505 #)443,00B168-189500729-0189-2605 #)535,00B168-189600729-0189-2705 #)176,00B170-190200729-0190-2205 #)241,00B170-190250729-0190-2305 #)267,00B170-190300729-0190-2405 #)352,00B170-190400729-0190-2505 #)444,00B170-190500729-0190-2605 #)536,00B170-190600729-0190-2705 #)178,00B175-196200729-0196-2205 #)244,00B176-196250729-0196-2305 #)270,00B175-196300729-0196-2405 #)355,00B175-196400729-0196-2505 #)449,00B175-196500729-0196-2605 #)541,00B175-196600729-0196-2705 #)176,00B190-210200729-0210-2205 #)243,00B190-210250729-0210-2305 #)267,00B190-210300729-0210-2405 #)352,00B190-210400729-0210-2505 #)444,00B190-210500729-0210-2605 #)536,00B190-210600729-0210-2705 #)181,00B195-217200729-0217-2205 #)249,00B195-217250729-0217-2305 #)

Repair clam

ps


ALL STD

.

90 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/20


Note:# AISI 304

05

274,00B195-217300729-0217-2405 #)360,00B195-217400729-0217-2505 #)458,00B195-217500729-0217-2605 #)559,00B195-217600729-0217-2705 #)255,00B210-230250729-0230-2305 #)279,00B210-230300729-0230-2405 #)367,00B210-230400729-0230-2505 #)467,00B210-230500729-0230-2605 #)580,00B210-230600729-0230-2705 #)183,00B216-238200729-0238-2205 #)

A216-238250729-0238-2305 #)277,00A216-238300729-0238-2405 #)364,00A216-238400729-0238-2505 #)469,00B216-238500729-0238-2605 #)574,00B216-238600729-0238-2705 #)190,00B225-246200729-0246-2205 #)262,00B225-246250729-0246-2305 #)285,00B225-246300729-0246-2405 #)381,00B225-246400729-0246-2505 #)486,00B225-246500729-0246-2605 #)586,00B225-246600729-0246-2705 #)191,00B230-250200729-0250-2205 #)265,00B230-250250729-0250-2305 #)288,00B230-250300729-0250-2405 #)387,00B230-250400729-0250-2505 #)492,00B230-250500729-0250-2605 #)593,00B230-250600729-0250-2705 #)189,00B240-260200729-0260-2205 #)264,00B240-260250729-0260-2305 #)287,00B240-260300729-0260-2405 #)388,00B240-260400729-0260-2505 #)490,00B240-260500729-0260-2605 #)589,00B240-260600729-0260-2705 #)207,00B250-270200729-0270-2205 #)277,00B250-270250729-0270-2305 #)303,00B250-270300729-0270-2405 #)407,00B250-270400729-0270-2505 #)505,00B250-270500729-0270-2605 #)614,00B250-270600729-0270-2705 #)218,00B269-289200729-0289-2205 #)293,00B269-289250729-0289-2305 #)323,00B269-289300729-0289-2405 #)429,00A269-289400729-0289-2505 #)520,00B269-289500729-0289-2605 #)640,00B269-289600729-0289-2705 #)223,00B273-293200729-0293-2205 #)301,00B273-293250729-0293-2305 #)331,00B273-293300729-0293-2405 #)

A273-293400729-0293-2505 #)544,00B273-293500729-0293-2605 #)652,00B273-293600729-0293-2705 #)759,00B273-293800729-0293-2905 #)227,00B282-302200729-0302-2205 #)304,00B282-302250729-0302-2305 #)336,00B282-302300729-0302-2405 #)446,00B282-302400729-0302-2505 #)554,00B282-302500729-0302-2605 #)664,00B282-302600729-0302-2705 #)774,00B282-302800729-0302-2905 #)230,00B295-315200729-0315-2205 #)307,00B295-315250729-0315-2305 #)342,00B295-315300729-0315-2405 #)452,00B295-315400729-0315-2505 #)563,00B295-315500729-0315-2605 #)675,00B295-315600729-0315-2705 #)784,00B295-315800729-0315-2905 #)232,00B315-335200729-0335-2205 #)309,00B315-335250729-0335-2305 #)343,00A315-335300729-0335-2405 #)

A315-335400729-0335-2505 #)567,00B315-335500729-0335-2605 #)678,00B315-335600729-0335-2705 #)791,00B315-335800729-0335-2905 #)234,00B322-344200729-0344-2205 #)311,00B322-344250729-0344-2305 #)347,00B322-344300729-0344-2405 #)457,00B322-344400729-0344-2505 #)573,00B322-344500729-0344-2605 #)795,00B322-344800729-0344-2905 #)237,00B337-358200729-0358-2205 #)315,00B337-358250729-0358-2305 #)351,00B337-358300729-0358-2405 #)

Repair clam

ps


ALL STD

.

91 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/20


Note:# AISI 304

05

579,00B337-358500729-0358-2605 #)682,00B322-344600729-0358-2705 #)807,00B337-358800729-0358-2905 #)244,00B347-367200729-0367-2205 #)324,00B347-367250729-0367-2305 #)361,00B347-367300729-0367-2405 #)479,00B347-367400729-0367-2505 #)596,00B347-367500729-0367-2605 #)711,00B347-367600729-0367-2705 #)831,00B347-367800729-0367-2905 #)244,00B365-385200729-0385-2205 #)324,00B365-385250729-0385-2305 #)361,00B365-385300729-0385-2405 #)480,00B365-385400729-0385-2505 #)596,00B365-385500729-0385-2605 #)715,00B365-385600729-0385-2705 #)832,00B365-385800729-0385-2905 #)247,00B382-402200729-0402-2205 #)367,00B382-402300729-0402-2405 #)490,00B382-402400729-0402-2505 #)607,00B382-402500729-0402-2605 #)725,00B382-402600729-0402-2705 #)845,00B382-402800729-0402-2905 #)252,00B396-420200729-0420-2205 #)329,00B382-402250729-0420-2305 #)373,00B396-420300729-0420-2405 #)494,00B396-420400729-0420-2505 #)616,00B396-420500729-0420-2605 #)737,00B396-420600729-0420-2705 #)859,00B396-420800729-0420-2905 #)280,00B410-430200729-0430-2205 #)369,00B410-430250729-0430-2305 #)417,00B410-430300729-0430-2405 #)551,00B410-430400729-0430-2505 #)687,00B410-430500729-0430-2605 #)821,00B410-430600729-0430-2705 #)961,00B410-430800729-0430-2905 #)278,00B420-440200729-0440-2205 #)549,00B420-440400729-0440-2505 #)684,00B420-440500729-0440-2605 #)818,00B420-440600729-0440-2705 #)953,00B420-440800729-0440-2905 #)288,00B435-455200729-0455-2205 #)380,00B435-455250729-0455-2305 #)428,00B435-455300729-0455-2405 #)571,00B435-455400729-0455-2505 #)708,00B435-455500729-0455-2605 #)846,00B435-455600729-0455-2705 #)986,00B435-455800729-0455-2905 #)292,00B450-470200729-0470-2205 #)386,00B450-470250729-0470-2305 #)435,00B450-470300729-0470-2405 #)577,00B450-470400729-0470-2505 #)718,00B450-470500729-0470-2605 #)861,00B450-470600729-0470-2705 #)

1.003,00B450-470800729-0470-2905 #)297,00B468-488200729-0488-2205 #)392,00B468-488250729-0488-2305 #)441,00B468-488300729-0488-2405 #)730,00B468-488500729-0488-2605 #)875,00B468-488600729-0488-2705 #)

1.019,00B468-488800729-0488-2905 #)304,00B490-510200729-0510-2205 #)399,00B490-510250729-0510-2305 #)452,00B490-510300729-0510-2405 #)599,00B490-510400729-0510-2505 #)894,00B490-510600729-0510-2705 #)

1.042,00B490-510800729-0510-2905 #)310,00B510-530200729-0530-2205 #)407,00B510-530250729-0530-2305 #)610,00B510-530400729-0530-2505 #)761,00B510-530500729-0530-2605 #)911,00B510-530600729-0530-2705 #)

1.062,00B510-530800729-0530-2905 #)313,00B520-540200729-0540-2205 #)410,00B520-540250729-0540-2305 #)464,00B520-540300729-0540-2405 #)616,00B520-540400729-0540-2505 #)768,00B520-540500729-0540-2605 #)920,00B520-540600729-0540-2705 #)

1.072,00B520-540800729-0540-2905 #)321,00B550-570200729-0570-2205 #)

Repair clam

ps


ALL STD

.

92 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/20


Note:# AISI 304

05

420,00B550-570250729-0570-2305 #)477,00B550-570300729-0570-2405 #)632,00B550-570400729-0570-2505 #)789,00B550-570500729-0570-2605 #)946,00B550-570600729-0570-2705 #)

1.101,00B550-570800729-0570-2905 #)327,00B570-590200729-0590-2205 #)429,00B570-590250729-0590-2305 #)486,00B570-590300729-0590-2405 #)646,00B570-590400729-0590-2505 #)804,00B570-590500729-0590-2605 #)964,00B570-590600729-0590-2705 #)

1.123,00B570-590800729-0590-2905 #)333,00B590-610200729-0610-2205 #)435,00B590-610250729-0610-2305 #)496,00B590-610300729-0610-2405 #)657,00B590-610400729-0610-2505 #)819,00B590-610500729-0610-2605 #)980,00B590-610600729-0610-2705 #)

1.143,00B590-610800729-0610-2905 #)345,00B630-650200729-0650-2205 #)450,00B630-650250729-0650-2305 #)679,00B630-650400729-0650-2505 #)848,00B630-650500729-0650-2605 #)

1.015,00B630-650600729-0650-2705 #)1.184,00B630-650800729-0650-2905 #)

Gross priceEUR

Deliv.-code

DN mm

AVK ref. nos.Type

Series 729/28

External clamp200 mm widthNBR sealingsDN 600-2000

02


Gross priceEUR

Deliv.-code

DN mm

AVK ref. nos.Type

Series 729/29

External clamp400 mm widthNBR sealingsDN 600-2000

02

3.736,00B600729-0600-29024.079,00B700729-0700-29024.446,00B800729-0800-29024.790,00B900729-0900-29025.111,00B1000729-1000-29025.684,00B1100729-1100-29026.257,00B1200729-1200-29026.830,00B1300729-1300-29027.403,00B1400729-1400-29027.976,00B1500729-1500-29028.549,00B1600729-1600-29029.122,00B1700729-1700-29029.672,00B1800729-1800-2902

10.222,00B1900729-1900-290210.772,00B2000729-2000-2902

Repair clam

ps


ALL STD

.

93 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3

Double/Tripleband repairclamp type FSTNBR sealings

Note:# AISI 304, DN

50 flange

20540

700,00B88-110300729-3110-240540 #)798,00B88-110400729-3110-250540 #)894,00B88-110500729-3110-260540 #)989,00B88-110600729-3110-270540 #)703,00B100-120300729-3120-240540 #)803,00B100-120400729-3120-250540 #)899,00B100-120500729-3120-260540 #)995,00B100-120600729-3120-270540 #)705,00B108-128300729-3128-240540 #)804,00B108-128400729-3128-250540 #)901,00B108-128500729-3128-260540 #)999,00B108-128600729-3128-270540 #)708,00B114-134300729-3134-240540 #)808,00B114-134400729-3134-250540 #)907,00B114-134500729-3134-260540 #)

1.005,00B114-134600729-3134-270540 #)712,00B120-140300729-3140-240540 #)814,00B120-140400729-3140-250540 #)914,00B120-140500729-3140-260540 #)

1.015,00B120-140600729-3140-270540 #)713,00B130-150300729-3150-240540 #)816,00B130-150400729-3150-250540 #)917,00B130-150500729-3150-260540 #)

1.017,00B130-150600729-3150-270540 #)715,00B135-155300729-3155-240540 #)818,00B135-155400729-3155-250540 #)919,00B135-155500729-3155-260540 #)

1.018,00B135-155600729-3155-270540 #)718,00B140-160300729-3160-240540 #)821,00B140-160400729-3160-250540 #)924,00B140-160500729-3160-260540 #)

1.025,00B140-160600729-3160-270540 #)725,00B159-180300729-3180-240540 #)833,00B159-180400729-3180-250540 #)937,00B159-180500729-3180-260540 #)

1.050,00B159-180600729-3180-270540 #)728,00B165-185300729-3185-240540 #)836,00B165-185400729-3185-250540 #)940,00B165-185500729-3185-260540 #)

1.047,00B165-185600729-3185-270540 #)730,00B168-189300729-3189-240540 #)838,00B168-189400729-3189-250540 #)942,00B168-189500729-3189-260540 #)

1.048,00B168-189600729-3189-270540 #)730,00B170-190300729-3190-240540 #)838,00B170-190400729-3190-250540 #)944,00B170-190500729-3190-260540 #)

1.050,00B170-190600729-3190-270540 #)735,00B175-196300729-3196-240540 #)843,00B175-196400729-3196-250540 #)950,00B175-196500729-3196-260540 #)

1.057,00B175-196600729-3196-270540 #)738,00B190-210300729-3210-240540 #)849,00B190-210400729-3210-250540 #)957,00B190-210500729-3210-260540 #)

1.065,00B190-210600729-3210-270540 #)851,00B195-217400729-3217-250540 #)959,00B195-217500729-3217-260540 #)

1.068,00B195-217600729-3217-270540 #)862,00B210-230400729-3230-250540 #)974,00B210-230500729-3230-260540 #)

1.085,00B210-230600729-3230-270540 #)866,00B216-238400729-3238-250540 #)979,00B216-238500729-3238-260540 #)

1.091,00B216-238600729-3238-270540 #)869,00B225-246400729-3246-250540 #)982,00B225-246500729-3246-260540 #)

1.093,00B225-246600729-3246-270540 #)881,00B240-260400729-3260-250540 #)997,00B240-260500729-3260-260540 #)

1.113,00B240-260600729-3260-270540 #)884,00B250-270400729-3270-250540 #)

1.000,00B250-270500729-3270-260540 #)1.118,00B250-270600729-3270-270540 #)

917,00B269-289400729-3289-250540 #)1.037,00B269-289500729-3289-260540 #)1.154,00B269-289600729-3289-270540 #)

949,00B273-293400729-3293-250540 #)1.075,00B273-293500729-3293-260540 #)1.203,00B273-293600729-3293-270540 #)

970,00B273-293400729-3302-250540 #)1.068,00B282-302500729-3302-260540 #)

Repair clam

ps


ALL STD

.

94 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

50 flange

20540

1.234,00B282-302600729-3302-270540 #)980,00B295-315400729-3315-250540 #)

1.115,00B295-315500729-3315-260540 #)1.247,00B295-315600729-3315-270540 #)

995,00B315-335400729-3335-250540 #)1.133,00B315-335500729-3335-260540 #)1.269,00B315-335600729-3335-270540 #)1.000,00B322-344400729-3344-250540 #)1.140,00B322-344500729-3344-260540 #)1.279,00B322-344600729-3344-270540 #)1.009,00B337-358400729-3358-250540 #)1.149,00B337-358500729-3358-260540 #)1.289,00B337-358600729-3358-270540 #)1.146,00B347-367500729-3367-260540 #)1.289,00B347-367600729-3367-270540 #)1.587,00B347-367800729-3367-290540 #)1.179,00B365-385500729-3385-260540 #)1.325,00B365-385600729-3385-270540 #)1.622,00B365-385800729-3385-290540 #)1.191,00B382-402500729-3402-260540 #)1.340,00B382-402600729-3402-270540 #)1.640,00B382-402800729-3402-290540 #)1.203,00B396-420500729-3420-260540 #)1.353,00B396-420600729-3420-270540 #)1.659,00B396-420800729-3420-290540 #)1.216,00B410-430500729-3430-260540 #)1.370,00B410-430600729-3430-270540 #)1.680,00B410-430800729-3430-290540 #)1.222,00B420-440500729-3440-260540 #)1.378,00B420-440600729-3440-270540 #)1.692,00B420-440800729-3440-290540 #)1.234,00B435-455500729-3455-260540 #)1.392,00B435-455600729-3455-270540 #)1.710,00B435-455800729-3455-290540 #)1.251,00B450-470500729-3470-260540 #)1.413,00B450-470600729-3470-270540 #)1.737,00B450-470800729-3470-290540 #)1.262,00B468-488500729-3488-260540 #)1.426,00B468-488600729-3488-270540 #)1.755,00B468-488800729-3488-290540 #)1.285,00B485-505500729-3505-260540 #)1.453,00B485-505600729-3505-270540 #)1.791,00B485-505800729-3505-290540 #)1.297,00B500-520500729-3520-260540 #)1.468,00B500-520600729-3520-270540 #)1.810,00B500-520800729-3520-290540 #)1.314,00B516-536500729-3536-260540 #)1.488,00B516-536600729-3536-270540 #)1.838,00B516-536800729-3536-290540 #)1.325,00B532-552500729-3552-260540 #)1.501,00B532-552600729-3552-270540 #)1.856,00B532-552800729-3552-290540 #)

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

65 flange

20543

730,00B88-110300729-3110-240543 #)828,00B88-110400729-3110-250543 #)924,00B88-110500729-3110-260543 #)

1.020,00B88-110600729-3110-270543 #)733,00B100-120300729-3120-240543 #)833,00B100-120400729-3120-250543 #)929,00B100-120500729-3120-260543 #)

1.025,00B100-120600729-3120-270543 #)735,00B108-128300729-3128-240543 #)834,00B108-128400729-3128-250543 #)932,00B108-128500729-3128-260543 #)

1.028,00B108-128600729-3128-270543 #)738,00B114-134300729-3134-240543 #)839,00B114-134400729-3134-250543 #)937,00B114-134500729-3134-260543 #)

1.035,00B114-134600729-3134-270543 #)741,00B120-140300729-3140-240543 #)844,00B120-140400729-3140-250543 #)944,00B120-140500729-3140-260543 #)

1.045,00B120-140600729-3140-270543 #)743,00B130-150300729-3150-240543 #)

Repair clam

ps


ALL STD

.

95 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

65 flange

20543

846,00B130-150400729-3150-250543 #)947,00B130-150500729-3150-260543 #)

1.047,00B130-150600729-3150-270543 #)745,00B135-155300729-3155-240543 #)848,00B135-155400729-3155-250543 #)949,00B135-155500729-3155-260543 #)

1.048,00B135-155600729-3155-270543 #)748,00B140-160300729-3160-240543 #)851,00B140-160400729-3160-250543 #)954,00B140-160500729-3160-260543 #)

1.055,00B140-160600729-3160-270543 #)755,00B159-180300729-3180-240543 #)862,00B159-180400729-3180-250543 #)967,00B159-180500729-3180-260543 #)

1.071,00B159-180600729-3180-270543 #)758,00B165-185300729-3185-240543 #)866,00B165-185400729-3185-250543 #)970,00B165-185500729-3185-260543 #)

1.076,00B165-185600729-3185-270543 #)760,00B168-189300729-3189-240543 #)868,00B168-189400729-3189-250543 #)972,00B168-189500729-3189-260543 #)

1.078,00B168-189600729-3189-270543 #)761,00B170-190300729-3190-240543 #)868,00B170-190400729-3190-250543 #)974,00B170-190500729-3190-260543 #)

1.078,00B170-190600729-3190-270543 #)763,00B175-196300729-3196-240543 #)872,00B175-196400729-3196-250543 #)980,00B175-196500729-3196-260543 #)

1.086,00B175-196600729-3196-270543 #)768,00B190-210300729-3210-240543 #)877,00B190-210400729-3210-250543 #)985,00B190-210500729-3210-260543 #)

1.095,00B190-210600729-3210-270543 #)881,00B195-217400729-3217-250543 #)989,00B195-217500729-3217-260543 #)

1.098,00B195-217600729-3217-270543 #)892,00B210-230400729-3230-250543 #)

1.003,00B210-230500729-3230-260543 #)1.115,00B210-230600729-3230-270543 #)

896,00B216-238400729-3238-250543 #)1.009,00B216-238500729-3238-260543 #)1.120,00B216-238600729-3238-270543 #)

899,00B225-246400729-3246-250543 #)1.010,00B225-246500729-3246-260543 #)1.123,00B225-246600729-3246-270543 #)

911,00B240-260400729-3260-250543 #)1.027,00B240-260500729-3260-260543 #)1.143,00B240-260600729-3260-270543 #)

914,00B250-270400729-3270-250543 #)1.030,00B250-270500729-3270-260543 #)1.148,00B250-270600729-3270-270543 #)

947,00B269-289400729-3289-250543 #)1.065,00B269-289500729-3289-260543 #)1.184,00B269-289600729-3289-270543 #)

979,00B273-293400729-3293-250543 #)1.105,00B273-293500729-3293-260543 #)1.231,00B273-293600729-3293-270543 #)1.000,00B282-302400729-3302-250543 #)1.131,00B282-302500729-3302-260543 #)1.264,00B282-302600729-3302-270543 #)1.010,00B295-315400729-3315-250543 #)1.144,00B295-315500729-3315-260543 #)1.279,00B295-315600729-3315-270543 #)1.025,00B315-335400729-3335-250543 #)1.163,00B315-335500729-3335-260543 #)1.299,00B315-335600729-3335-270543 #)1.030,00B322-344400729-3344-250543 #)1.169,00B322-344500729-3344-260543 #)1.309,00B322-344600729-3344-270543 #)1.038,00B337-358400729-3358-250543 #)1.178,00B337-358500729-3358-260543 #)1.319,00B337-358600729-3358-270543 #)1.176,00B347-367500729-3367-260543 #)1.319,00B347-367600729-3367-270543 #)1.617,00B347-367800729-3367-290543 #)1.209,00B365-385500729-3385-260543 #)1.355,00B365-385600729-3385-270543 #)1.650,00B365-385800729-3385-290543 #)1.221,00B382-402500729-3402-260543 #)1.368,00B382-402600729-3402-270543 #)

Repair clam

ps


ALL STD

.

96 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

65 flange

20543

1.669,00B382-402800729-3402-290543 #)1.232,00B396-420500729-3420-260543 #)1.383,00B396-420600729-3420-270543 #)1.687,00B396-420800729-3420-290543 #)1.246,00B410-430500729-3430-260543 #)1.400,00B410-430600729-3430-270543 #)1.708,00B410-430800729-3430-290543 #)1.252,00B420-440500729-3440-260543 #)1.408,00B420-440600729-3440-270543 #)1.722,00B420-440800729-3440-290543 #)1.264,00B435-455500729-3455-260543 #)1.421,00B435-455600729-3455-270543 #)1.740,00B435-455800729-3455-290543 #)1.281,00B450-470500729-3470-260543 #)1.441,00B450-470600729-3470-270543 #)1.767,00B450-470800729-3470-290543 #)1.292,00B468-488500729-3488-260543 #)1.456,00B468-488600729-3488-270543 #)1.785,00B468-488800729-3488-290543 #)1.315,00B485-505500729-3505-260543 #)1.483,00B485-505600729-3505-270543 #)1.821,00B485-505800729-3505-290543 #)1.327,00B500-520500729-3520-260543 #)1.496,00B500-520600729-3520-270543 #)1.840,00B500-520800729-3520-290543 #)1.344,00B516-536500729-3536-260543 #)1.518,00B516-536600729-3536-270543 #)1.868,00B516-536800729-3536-290543 #)1.355,00B532-552500729-3552-260543 #)1.531,00B532-552600729-3552-270543 #)1.886,00B532-552800729-3552-290543 #)

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

80 flange

20546

741,00B88-110300729-3110-240546 #)841,00B88-110400729-3110-250546 #)936,00B88-110500729-3110-260546 #)

1.032,00B88-110600729-3110-270546 #)745,00B100-120300729-3120-240546 #)844,00B100-120400729-3120-250546 #)940,00B100-120500729-3120-260546 #)

1.038,00B100-120600729-3120-270546 #)746,00B108-128300729-3128-240546 #)846,00B108-128400729-3128-250546 #)944,00B108-128500729-3128-260546 #)

1.042,00B108-128600729-3128-270546 #)750,00B114-134300729-3134-240546 #)851,00B114-134400729-3134-250546 #)949,00B114-134500729-3134-260546 #)

1.048,00B114-134600729-3134-270546 #)755,00B120-140300729-3140-240546 #)858,00B120-140400729-3140-250546 #)957,00B120-140500729-3140-260546 #)

1.057,00B120-140600729-3140-270546 #)756,00B130-150300729-3150-240546 #)859,00B130-150400729-3150-250546 #)959,00B130-150500729-3150-260546 #)

1.060,00B130-150600729-3150-270546 #)758,00B135-155300729-3155-240546 #)861,00B135-155400729-3155-250546 #)960,00B135-155500729-3155-260546 #)

1.062,00B135-155600729-3155-270546 #)760,00B140-160300729-3160-240546 #)864,00B140-160400729-3160-250546 #)965,00B140-160500729-3160-260546 #)

1.068,00B140-160600729-3160-270546 #)768,00B159-180300729-3180-240546 #)874,00B159-180400729-3180-250546 #)979,00B159-180500729-3180-260546 #)

1.083,00B159-180600729-3180-270546 #)770,00B165-185300729-3185-240546 #)879,00B165-185400729-3185-250546 #)984,00B165-185500729-3185-260546 #)

1.088,00B165-185600729-3185-270546 #)771,00B168-189300729-3189-240546 #)879,00B168-189400729-3189-250546 #)

Repair clam

ps


ALL STD

.

97 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

80 flange

20546

985,00B168-189500729-3189-260546 #)1.090,00B168-189600729-3189-270546 #)

773,00B170-190300729-3190-240546 #)881,00B170-190400729-3190-250546 #)987,00B170-190500729-3190-260546 #)

1.091,00B170-190600729-3190-270546 #)776,00B175-196300729-3196-240546 #)886,00B175-196400729-3196-250546 #)992,00B175-196500729-3196-260546 #)

1.100,00B175-196600729-3196-270546 #)781,00B190-210300729-3210-240546 #)891,00B190-210400729-3210-250546 #)999,00B190-210500729-3210-260546 #)

1.106,00B190-210600729-3210-270546 #)894,00B195-217400729-3217-250546 #)

1.002,00B195-217500729-3217-260546 #)1.109,00B195-217600729-3217-270546 #)

906,00B210-230400729-3230-250546 #)1.017,00B210-230500729-3230-260546 #)1.126,00B210-230600729-3230-270546 #)

909,00B216-238400729-3238-250546 #)1.022,00B216-238500729-3238-260546 #)1.133,00B216-238600729-3238-270546 #)

911,00B225-246400729-3246-250546 #)1.023,00B225-246500729-3246-260546 #)1.136,00B225-246600729-3246-270546 #)

924,00B240-260400729-3260-250546 #)1.040,00B240-260500729-3260-260546 #)1.154,00B240-260600729-3260-270546 #)

927,00B250-270400729-3270-250546 #)1.043,00B250-270500729-3270-260546 #)1.159,00B250-270600729-3270-270546 #)

960,00B269-289400729-3289-250546 #)1.078,00B269-289500729-3289-260546 #)1.196,00B269-289600729-3289-270546 #)

992,00B273-293400729-3293-250546 #)1.118,00B273-293500729-3293-260546 #)1.244,00B273-293600729-3293-270546 #)1.012,00B282-302400729-3302-250546 #)1.144,00B282-302500729-3302-260546 #)1.276,00B282-302600729-3302-270546 #)1.023,00B295-315400729-3315-250546 #)1.158,00B295-315500729-3315-260546 #)1.290,00B295-315600729-3315-270546 #)1.037,00B315-335400729-3335-250546 #)1.174,00B315-335500729-3335-260546 #)1.312,00B315-335600729-3335-270546 #)1.043,00B322-344400729-3344-250546 #)1.183,00B322-344500729-3344-260546 #)1.320,00B322-344600729-3344-270546 #)1.050,00B337-358400729-3358-250546 #)1.191,00B337-358500729-3358-260546 #)1.332,00B337-358600729-3358-270546 #)1.189,00B347-367500729-3367-260546 #)1.332,00B347-367600729-3367-270546 #)1.630,00B347-367800729-3367-290546 #)1.221,00B365-385500729-3385-260546 #)1.368,00B365-385600729-3385-270546 #)1.664,00B365-385800729-3385-290546 #)1.232,00B382-402500729-3402-260546 #)1.382,00B382-402600729-3402-270546 #)1.682,00B382-402800729-3402-290546 #)1.244,00B396-420500729-3420-260546 #)1.395,00B396-420600729-3420-270546 #)1.700,00B396-420800729-3420-290546 #)1.259,00B410-430500729-3430-260546 #)1.413,00B410-430600729-3430-270546 #)1.723,00B410-430800729-3430-290546 #)1.266,00B420-440500729-3440-260546 #)1.421,00B420-440600729-3440-270546 #)1.735,00B420-440800729-3440-290546 #)1.277,00B435-455500729-3455-260546 #)1.435,00B435-455600729-3455-270546 #)1.753,00B435-455800729-3455-290546 #)1.294,00B450-470500729-3470-260546 #)1.455,00B450-470600729-3470-270546 #)1.780,00B450-470800729-3470-290546 #)1.305,00B468-488500729-3488-260546 #)1.468,00B468-488600729-3488-270546 #)1.798,00B468-488800729-3488-290546 #)1.329,00B485-505500729-3505-260546 #)1.496,00B485-505600729-3505-270546 #)

Repair clam

ps


ALL STD

.

98 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

80 flange

20546

1.835,00B485-505800729-3505-290546 #)1.340,00B500-520500729-3520-260546 #)1.509,00B500-520600729-3520-270546 #)1.853,00B500-520800729-3520-290546 #)1.357,00B516-536500729-3536-260546 #)1.529,00B516-536600729-3536-270546 #)1.879,00B516-536800729-3536-290546 #)1.368,00B532-552500729-3552-260546 #)1.544,00B532-552600729-3552-270546 #)1.898,00B532-552800729-3552-290546 #)

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

100 flange

20549

821,00B108-128300729-3128-240549 #)931,00B108-128400729-3128-250549 #)

1.038,00B108-128500729-3128-260549 #)1.140,00B108-128600729-3128-270549 #)

853,00B114-134300729-3134-240549 #)954,00B114-134400729-3134-250549 #)

1.052,00B114-134500729-3134-260549 #)1.149,00B114-134600729-3134-270549 #)

858,00B120-140300729-3140-240549 #)959,00B120-140400729-3140-250549 #)

1.060,00B120-140500729-3140-260549 #)1.159,00B120-140600729-3140-270549 #)

859,00B130-150300729-3150-240549 #)962,00B130-150400729-3150-250549 #)

1.062,00B130-150500729-3150-260549 #)1.163,00B130-150600729-3150-270549 #)

861,00B135-155300729-3155-240549 #)964,00B135-155400729-3155-250549 #)

1.063,00B135-155500729-3155-260549 #)1.164,00B135-155600729-3155-270549 #)

862,00B140-160300729-3160-240549 #)967,00B140-160400729-3160-250549 #)

1.068,00B140-160500729-3160-260549 #)1.169,00B140-160600729-3160-270549 #)

871,00B159-180300729-3180-240549 #)977,00B159-180400729-3180-250549 #)

1.081,00B159-180500729-3180-260549 #)1.186,00B159-180600729-3180-270549 #)

874,00B165-185300729-3185-240549 #)980,00B165-185400729-3185-250549 #)

1.086,00B165-185500729-3185-260549 #)1.191,00B165-185600729-3185-270549 #)

876,00B168-189300729-3189-240549 #)982,00B168-189400729-3189-250549 #)

1.086,00B168-189500729-3189-260549 #)1.193,00B168-189600729-3189-270549 #)

877,00B170-190300729-3190-240549 #)984,00B170-190400729-3190-250549 #)

1.088,00B170-190500729-3190-260549 #)1.194,00B170-190600729-3190-270549 #)

879,00B175-196300729-3196-240549 #)989,00B175-196400729-3196-250549 #)

1.095,00B175-196500729-3196-260549 #)1.201,00B175-196600729-3196-270549 #)

882,00B190-210300729-3210-240549 #)994,00B190-210400729-3210-250549 #)

1.101,00B190-210500729-3210-260549 #)1.209,00B190-210600729-3210-270549 #)

995,00B195-217400729-3217-250549 #)1.105,00B195-217500729-3217-260549 #)1.212,00B195-217600729-3217-270549 #)1.007,00B210-230400729-3230-250549 #)1.118,00B210-230500729-3230-260549 #)1.229,00B210-230600729-3230-270549 #)1.012,00B216-238400729-3238-250549 #)1.123,00B216-238500729-3238-260549 #)1.236,00B216-238600729-3238-270549 #)1.013,00B225-246400729-3246-250549 #)1.126,00B225-246500729-3246-260549 #)1.239,00B225-246600729-3246-270549 #)

Repair clam

ps


ALL STD

.

99 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

100 flange

20549

1.027,00B240-260400729-3260-250549 #)1.141,00B240-260500729-3260-260549 #)1.257,00B240-260600729-3260-270549 #)1.028,00B250-270400729-3270-250549 #)1.146,00B250-270500729-3270-260549 #)1.262,00B250-270600729-3270-270549 #)1.062,00B269-289400729-3289-250549 #)1.181,00B269-289500729-3289-260549 #)1.299,00B269-289600729-3289-270549 #)1.095,00B273-293400729-3293-250549 #)1.138,00B273-293500729-3293-260549 #)1.347,00B273-293600729-3293-270549 #)1.115,00B282-302400729-3302-250549 #)1.241,00B282-302500729-3302-260549 #)1.378,00B282-302600729-3302-270549 #)1.125,00B295-315400729-3315-250549 #)1.259,00B295-315500729-3315-260549 #)1.393,00B295-315600729-3315-270549 #)1.140,00B315-335400729-3335-250549 #)1.277,00B315-335500729-3335-260549 #)1.415,00B315-335600729-3335-270549 #)1.148,00B322-344400729-3344-250549 #)1.284,00B322-344500729-3344-260549 #)1.423,00B322-344600729-3344-270549 #)1.153,00B337-358400729-3358-250549 #)1.294,00B337-358500729-3358-260549 #)1.435,00B337-358600729-3358-270549 #)1.292,00B347-367500729-3367-260549 #)1.433,00B347-367600729-3367-270549 #)1.732,00B347-367800729-3367-290549 #)1.324,00B365-385500729-3385-260549 #)1.471,00B365-385600729-3385-270549 #)1.767,00B365-385800729-3385-290549 #)1.335,00B382-402500729-3402-260549 #)1.485,00B382-402600729-3402-270549 #)1.785,00B382-402800729-3402-290549 #)1.347,00B396-420500729-3420-260549 #)1.498,00B396-420600729-3420-270549 #)1.803,00B396-420800729-3420-290549 #)1.362,00B410-430500729-3430-260549 #)1.514,00B410-430600729-3430-270549 #)1.826,00B410-430800729-3430-290549 #)1.368,00B420-440500729-3440-260549 #)1.523,00B420-440600729-3440-270549 #)1.836,00B420-440800729-3440-290549 #)1.380,00B435-455500729-3455-260549 #)1.538,00B435-455600729-3455-270549 #)1.854,00B435-455800729-3455-290549 #)1.397,00B450-470500729-3470-260549 #)1.558,00B450-470600729-3470-270549 #)1.881,00B450-470800729-3470-290549 #)1.408,00B468-488500729-3488-260549 #)1.571,00B468-488600729-3488-270549 #)1.901,00B468-488800729-3488-290549 #)1.430,00B485-505500729-3505-260549 #)1.599,00B485-505600729-3505-270549 #)1.937,00B485-505800729-3505-290549 #)1.441,00B500-520500729-3520-260549 #)1.612,00B500-520600729-3520-270549 #)1.956,00B500-520800729-3520-290549 #)1.458,00B516-536500729-3536-260549 #)1.632,00B516-536600729-3536-270549 #)1.982,00B516-536800729-3536-290549 #)1.470,00B532-552500729-3552-260549 #)1.645,00B532-552600729-3552-270549 #)2.000,00B532-552800729-3552-290549 #)

Repair clam

ps


ALL STD

.

100 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

125 flange

20552

1.038,00B135-155400729-3155-250552 #)1.140,00B135-155500729-3155-260552 #)1.239,00B135-155600729-3155-270552 #)1.042,00B140-160400729-3160-250552 #)1.144,00B140-160500729-3160-260552 #)1.224,00B140-160600729-3160-270552 #)1.053,00B159-180400729-3180-250552 #)1.158,00B159-180500729-3180-260552 #)1.262,00B159-180600729-3180-270552 #)1.057,00B165-185400729-3185-250552 #)1.161,00B165-185500729-3185-260552 #)1.267,00B165-185600729-3185-270552 #)1.058,00B168-189400729-3189-250552 #)1.163,00B168-189500729-3189-260552 #)1.267,00B168-189600729-3189-270552 #)1.060,00B170-190400729-3190-250552 #)1.164,00B170-190500729-3190-260552 #)1.269,00B170-190600729-3190-270552 #)1.063,00B175-196400729-3196-250552 #)1.171,00B175-196500729-3196-260552 #)1.277,00B175-196600729-3196-270552 #)1.068,00B190-210400729-3210-250552 #)1.176,00B190-210500729-3210-260552 #)1.285,00B190-210600729-3210-270552 #)1.071,00B195-217400729-3217-250552 #)1.179,00B195-217500729-3217-260552 #)1.289,00B195-217600729-3217-270552 #)1.083,00B210-230400729-3230-250552 #)1.194,00B210-230500729-3230-260552 #)1.305,00B210-230600729-3230-270552 #)1.086,00B216-238400729-3238-250552 #)1.199,00B216-238500729-3238-260552 #)1.310,00B216-238600729-3238-270552 #)1.090,00B225-246400729-3246-250552 #)1.201,00B225-246500729-3246-260552 #)1.314,00B225-246600729-3246-270552 #)1.101,00B240-260400729-3260-250552 #)1.217,00B240-260500729-3260-260552 #)1.334,00B240-260600729-3260-270552 #)1.105,00B250-270400729-3270-250552 #)1.221,00B250-270500729-3270-260552 #)1.339,00B250-270600729-3270-270552 #)1.138,00B269-289400729-3289-250552 #)1.256,00B269-289500729-3289-260552 #)1.375,00B269-289600729-3289-270552 #)1.169,00B273-293400729-3293-250552 #)1.295,00B273-293500729-3293-260552 #)1.421,00B273-293600729-3293-270552 #)1.191,00B282-302400729-3302-250552 #)1.322,00B282-302500729-3302-260552 #)1.455,00B282-302600729-3302-270552 #)1.201,00B295-315400729-3315-250552 #)1.335,00B295-315500729-3315-260552 #)1.470,00B295-315600729-3315-270552 #)1.216,00B315-335400729-3335-250552 #)1.353,00B315-335500729-3335-260552 #)1.490,00B315-335600729-3335-270552 #)1.221,00B322-344400729-3344-250552 #)1.360,00B322-344500729-3344-260552 #)1.499,00B322-344600729-3344-270552 #)1.229,00B337-358400729-3358-250552 #)1.368,00B337-358500729-3358-260552 #)1.509,00B337-358600729-3358-270552 #)1.378,00B347-367500729-3367-260552 #)1.521,00B347-367600729-3367-270552 #)1.808,00B347-367800729-3367-290552 #)1.400,00B365-385500729-3385-260552 #)1.546,00B365-385600729-3385-270552 #)1.841,00B365-385800729-3385-290552 #)1.412,00B382-402500729-3402-260552 #)1.559,00B382-402600729-3402-270552 #)1.859,00B382-402800729-3402-290552 #)1.423,00B396-420500729-3420-260552 #)1.574,00B396-420600729-3420-270552 #)1.879,00B396-420800729-3420-290552 #)1.436,00B410-430500729-3430-260552 #)1.591,00B410-430600729-3430-270552 #)1.901,00B410-430800729-3430-290552 #)1.443,00B420-440500729-3440-260552 #)1.599,00B420-440600729-3440-270552 #)1.912,00B420-440800729-3440-290552 #)1.455,00B435-455500729-3455-260552 #)

Repair clam

ps


ALL STD

.

101 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

125 flange

20552

1.612,00B435-455600729-3455-270552 #)1.931,00B435-455800729-3455-290552 #)1.471,00B450-470500729-3470-260552 #)1.632,00B450-470600729-3470-270552 #)1.957,00B450-470800729-3470-290552 #)1.483,00B468-488500729-3488-260552 #)1.647,00B468-488600729-3488-270552 #)1.975,00B468-488800729-3488-290552 #)1.506,00B485-505500729-3505-260552 #)1.674,00B485-505600729-3505-270552 #)2.012,00B485-505800729-3505-290552 #)1.518,00B500-520500729-3520-260552 #)1.687,00B500-520600729-3520-270552 #)2.030,00B500-520800729-3520-290552 #)1.534,00B516-536500729-3536-260552 #)1.708,00B516-536600729-3536-270552 #)2.058,00B516-536800729-3536-290552 #)1.546,00B532-552500729-3552-260552 #)1.722,00B532-552600729-3552-270552 #)2.077,00B532-552800729-3552-290552 #)

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

150 flange

20555

1.249,00B168-189500729-3189-260555 #)1.355,00B168-189600729-3189-270555 #)1.251,00B170-190500729-3190-260555 #)1.357,00B170-190600729-3190-270555 #)1.257,00B175-196500729-3196-260555 #)1.363,00B175-196600729-3196-270555 #)1.164,00B190-210400729-3210-250555 #)1.264,00B190-210500729-3210-260555 #)1.372,00B190-210600729-3210-270555 #)1.266,00B195-217500729-3217-260555 #)1.375,00B195-217600729-3217-270555 #)1.183,00B210-230400729-3230-250555 #)1.281,00B210-230500729-3230-260555 #)1.392,00B210-230600729-3230-270555 #)1.189,00B216-238400729-3238-250555 #)1.285,00B216-238500729-3238-260555 #)1.398,00B216-238600729-3238-270555 #)1.201,00B225-246400729-3246-250555 #)1.289,00B225-246500729-3246-260555 #)1.400,00B225-246600729-3246-270555 #)1.211,00B240-260400729-3260-250555 #)1.304,00B240-260500729-3260-260555 #)1.420,00B240-260600729-3260-270555 #)1.307,00B250-270500729-3270-260555 #)1.425,00B250-270600729-3270-270555 #)1.344,00B269-289500729-3289-260555 #)1.461,00B269-289600729-3289-270555 #)1.382,00B273-293500729-3293-260555 #)1.509,00B273-293600729-3293-270555 #)1.408,00B282-302500729-3302-260555 #)1.541,00B282-302600729-3302-270555 #)1.421,00B295-315500729-3315-260555 #)1.556,00B295-315600729-3315-270555 #)1.440,00B315-335500729-3335-260555 #)1.576,00B315-335600729-3335-270555 #)1.446,00B322-344500729-3344-260555 #)1.586,00B322-344600729-3344-270555 #)1.456,00B337-358500729-3358-260555 #)1.596,00B337-358600729-3358-270555 #)1.465,00B347-367500729-3367-260555 #)1.607,00B347-367600729-3367-270555 #)1.894,00B347-367800729-3367-290555 #)1.486,00B365-385500729-3385-260555 #)1.632,00B365-385600729-3385-270555 #)1.927,00B365-385800729-3385-290555 #)1.498,00B382-402500729-3402-260555 #)1.647,00B382-402600729-3402-270555 #)1.946,00B382-402800729-3402-290555 #)1.509,00B396-420500729-3420-260555 #)1.660,00B396-420600729-3420-270555 #)1.966,00B396-420800729-3420-290555 #)1.523,00B410-430500729-3430-260555 #)1.677,00B410-430600729-3430-270555 #)

Repair clam

ps


ALL STD

.

102 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

150 flange

20555

1.987,00B410-430800729-3430-290555 #)1.529,00B420-440500729-3440-260555 #)1.685,00B420-440600729-3440-270555 #)1.999,00B420-440800729-3440-290555 #)1.541,00B435-455500729-3455-260555 #)1.699,00B435-455600729-3455-270555 #)2.017,00B435-455800729-3455-290555 #)1.558,00B450-470500729-3470-260555 #)1.718,00B450-470600729-3470-270555 #)2.043,00B450-470800729-3470-290555 #)1.569,00B468-488500729-3488-260555 #)1.733,00B468-488600729-3488-270555 #)2.062,00B468-488800729-3488-290555 #)1.592,00B485-505500729-3505-260555 #)1.760,00B485-505600729-3505-270555 #)2.098,00B485-505800729-3505-290555 #)1.604,00B500-520500729-3520-260555 #)1.775,00B500-520600729-3520-270555 #)2.116,00B500-520800729-3520-290555 #)1.621,00B516-536500729-3536-260555 #)1.795,00B516-536600729-3536-270555 #)2.145,00B516-536800729-3536-290555 #)1.632,00B532-552500729-3552-260555 #)1.808,00B532-552600729-3552-270555 #)2.163,00B532-552800729-3552-290555 #)

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

175 flange

20557

1.635,00B190-210500729-3210-260557 #)1.743,00B190-210600729-3210-270557 #)1.637,00B195-217500729-3217-260557 #)1.747,00B195-217600729-3217-270557 #)1.652,00B210-230500729-3230-260557 #)1.763,00B210-230600729-3230-270557 #)1.546,00B216-238500729-3238-260557 #)1.770,00B216-238600729-3238-270557 #)1.660,00B225-246500729-3246-260557 #)1.771,00B225-246600729-3246-270557 #)1.675,00B240-260500729-3260-260557 #)1.791,00B240-260600729-3260-270557 #)1.679,00B250-270500729-3270-260557 #)1.796,00B250-270600729-3270-270557 #)1.713,00B269-289500729-3289-260557 #)1.833,00B269-289600729-3289-270557 #)1.753,00B273-293500729-3293-260557 #)1.879,00B273-293600729-3293-270557 #)1.780,00B282-302500729-3302-260557 #)1.912,00B282-302600729-3302-270557 #)1.793,00B295-315500729-3315-260557 #)1.927,00B295-315600729-3315-270557 #)1.811,00B315-335500729-3335-260557 #)1.947,00B315-335600729-3335-270557 #)1.818,00B322-344500729-3344-260557 #)1.957,00B322-344600729-3344-270557 #)1.828,00B337-358500729-3358-260557 #)1.967,00B337-358600729-3358-270557 #)1.825,00B347-367500729-3367-260557 #)1.967,00B347-367600729-3367-270557 #)2.266,00B347-367800729-3367-290557 #)1.858,00B365-385500729-3385-260557 #)2.004,00B365-385600729-3385-270557 #)2.299,00B365-385800729-3385-290557 #)1.869,00B382-402500729-3402-260557 #)2.017,00B382-402600729-3402-270557 #)2.319,00B382-402800729-3402-290557 #)1.881,00B396-420500729-3420-260557 #)2.032,00B396-420600729-3420-270557 #)2.337,00B396-420800729-3420-290557 #)1.894,00B410-430500729-3430-260557 #)2.049,00B410-430600729-3430-270557 #)2.359,00B410-430800729-3430-290557 #)1.901,00B420-440500729-3440-260557 #)2.057,00B420-440600729-3440-270557 #)2.370,00B420-440800729-3440-290557 #)1.912,00B435-455500729-3455-260557 #)2.070,00B435-455600729-3455-270557 #)

Repair clam

ps


ALL STD

.

103 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

175 flange

20557

2.389,00B435-455800729-3455-290557 #)1.929,00B450-470500729-3470-260557 #)2.090,00B450-470600729-3470-270557 #)2.415,00B450-470800729-3470-290557 #)1.941,00B468-488500729-3488-260557 #)2.105,00B468-488600729-3488-270557 #)2.433,00B468-488800729-3488-290557 #)1.964,00B485-505500729-3505-260557 #)2.131,00B485-505600729-3505-270557 #)2.470,00B485-505800729-3505-290557 #)1.975,00B500-520500729-3520-260557 #)2.146,00B500-520600729-3520-270557 #)2.488,00B500-520800729-3520-290557 #)1.992,00B516-536500729-3536-260557 #)2.166,00B516-536600729-3536-270557 #)2.516,00B516-536800729-3536-290557 #)2.004,00B532-552500729-3552-260557 #)2.180,00B532-552600729-3552-270557 #)2.534,00B532-552800729-3552-290557 #)

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

200 flange

20558

1.800,00B216-238600729-3238-270558 #)1.803,00B225-246600729-3246-270558 #)1.821,00B240-260600729-3260-270558 #)1.826,00B250-270600729-3270-270558 #)1.864,00B269-289600729-3289-270558 #)1.911,00B273-293600729-3293-270558 #)1.811,00B282-302500729-3302-260558 #)1.942,00B282-302600729-3302-270558 #)1.825,00B295-315500729-3315-260558 #)1.957,00B295-315600729-3315-270558 #)1.841,00B315-335500729-3335-260558 #)1.979,00B315-335600729-3335-270558 #)1.849,00B322-344500729-3344-260558 #)1.987,00B322-344600729-3344-270558 #)1.858,00B337-358500729-3358-260558 #)1.999,00B337-358600729-3358-270558 #)1.868,00B347-367500729-3367-260558 #)2.010,00B347-367600729-3367-270558 #)2.297,00B347-367800729-3367-290558 #)1.889,00B365-385500729-3385-260558 #)2.035,00B365-385600729-3385-270558 #)2.330,00B365-385800729-3385-290558 #)1.899,00B382-402500729-3402-260558 #)2.049,00B382-402600729-3402-270558 #)2.349,00B382-402800729-3402-290558 #)1.911,00B396-420500729-3420-260558 #)2.062,00B396-420600729-3420-270558 #)2.367,00B396-420800729-3420-290558 #)1.926,00B410-430500729-3430-260558 #)2.080,00B410-430600729-3430-270558 #)2.390,00B410-430800729-3430-290558 #)1.849,00B420-440500729-3440-260558 #)2.088,00B420-440600729-3440-270558 #)2.402,00B420-440800729-3440-290558 #)1.944,00B435-455500729-3455-260558 #)2.102,00B435-455600729-3455-270558 #)2.420,00B435-455800729-3455-290558 #)1.961,00B450-470500729-3470-260558 #)2.121,00B450-470600729-3470-270558 #)2.447,00B450-470800729-3470-290558 #)1.972,00B468-488500729-3488-260558 #)2.135,00B468-488600729-3488-270558 #)2.465,00B468-488800729-3488-290558 #)1.995,00B485-505500729-3505-260558 #)2.163,00B485-505600729-3505-270558 #)2.501,00B485-505800729-3505-290558 #)2.007,00B500-520500729-3520-260558 #)2.176,00B500-520600729-3520-270558 #)2.520,00B500-520800729-3520-290558 #)2.024,00B516-536500729-3536-260558 #)2.198,00B516-536600729-3536-270558 #)2.546,00B516-536800729-3536-290558 #)2.035,00B532-552500729-3552-260558 #)2.211,00B532-552600729-3552-270558 #)

Repair clam

ps


ALL STD

.

104 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

200 flange

20558

2.564,00B532-552800729-3552-290558 #)

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

50 flange

30540

1.538,00B548-578500729-3578-360540 #)1.755,00B548-578600729-3578-370540 #)2.193,00B548-578800729-3578-390540 #)1.549,00B568-598500729-3598-360540 #)1.768,00B568-598600729-3598-370540 #)2.209,00B568-598800729-3598-390540 #)1.587,00B588-618500729-3618-360540 #)1.813,00B588-618600729-3618-370540 #)2.269,00B588-618800729-3618-390540 #)1.833,00B608-638600729-3638-370540 #)2.296,00B608-638800729-3638-390540 #)1.854,00B628-658600729-3658-370540 #)2.324,00B628-658800729-3658-390540 #)1.874,00B648-678600729-3678-370540 #)2.350,00B648-678800729-3678-390540 #)1.894,00B668-698600729-3698-370540 #)2.377,00B668-698800729-3698-390540 #)1.921,00B688-718600729-3718-370540 #)2.412,00B688-718800729-3718-390540 #)1.941,00B708-738600729-3738-370540 #)2.438,00B708-738800729-3738-390540 #)1.961,00B728-758600729-3758-370540 #)2.466,00B728-758800729-3758-390540 #)1.982,00B748-778600729-3778-370540 #)2.493,00B748-778800729-3778-390540 #)2.002,00B768-798600729-3798-370540 #)2.521,00B768-798800729-3798-390540 #)

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

65 flange

30543

1.569,00B548-578500729-3578-360543 #)1.785,00B548-578600729-3578-370543 #)2.221,00B548-578800729-3578-390543 #)1.579,00B568-598500729-3598-360543 #)1.798,00B568-598600729-3598-370543 #)2.239,00B568-598800729-3598-390543 #)1.617,00B588-618500729-3618-360543 #)1.843,00B588-618600729-3618-370543 #)2.299,00B588-618800729-3618-390543 #)1.863,00B608-638600729-3638-370543 #)2.325,00B608-638800729-3638-390543 #)1.883,00B628-658600729-3658-370543 #)2.352,00B628-658800729-3658-390543 #)1.904,00B648-678600729-3678-370543 #)2.380,00B648-678800729-3678-390543 #)1.924,00B668-698600729-3698-370543 #)2.407,00B668-698800729-3698-390543 #)1.951,00B688-718600729-3718-370543 #)2.442,00B688-718800729-3718-390543 #)1.971,00B708-738600729-3738-370543 #)2.468,00B708-738800729-3738-390543 #)1.990,00B728-758600729-3758-370543 #)2.496,00B728-758800729-3758-390543 #)2.012,00B748-778600729-3778-370543 #)

Repair clam

ps


ALL STD

.

105 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

65 flange

30543

2.523,00B748-778800729-3778-390543 #)2.032,00B768-798600729-3798-370543 #)2.551,00B768-798800729-3798-390543 #)

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

80 flange

30546


Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

100 flange

30549

1.684,00B548-578500729-3578-360549 #)1.901,00B548-578600729-3578-370549 #)2.337,00B548-578800729-3578-390549 #)1.694,00B568-598500729-3598-360549 #)1.912,00B568-598600729-3598-370549 #)2.354,00B568-598800729-3598-390549 #)1.732,00B588-618500729-3618-360549 #)1.957,00B588-618600729-3618-370549 #)2.413,00B588-618800729-3618-390549 #)1.979,00B608-638600729-3638-370549 #)2.440,00B608-638800729-3638-390549 #)1.999,00B628-658600729-3658-370549 #)2.468,00B628-658800729-3658-390549 #)2.572,00B648-678600729-3678-370549 #)2.495,00B648-678800729-3678-390549 #)2.040,00B668-698600729-3698-370549 #)2.523,00B668-698800729-3698-390549 #)2.065,00B688-718600729-3718-370549 #)2.556,00B688-718800729-3718-390549 #)2.085,00B708-738600729-3738-370549 #)2.584,00B708-738800729-3738-390549 #)2.107,00B728-758600729-3758-370549 #)2.611,00B728-758800729-3758-390549 #)2.127,00B748-778600729-3778-370549 #)2.639,00B748-778800729-3778-390549 #)

Repair clam

ps


ALL STD

.

106 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

100 flange

30549

2.146,00B768-798600729-3798-370549 #)2.666,00B768-798800729-3798-390549 #)

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

125 flange

30552


Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

150 flange

30555


Repair clam

ps


ALL STD

.

107 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

175 flange

30557


Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/3


Note:# AISI 304, DN

200 flange

30558


Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/30

Triple bandrepair clamptype FS 30NBR sealings

Note:# AISI 304

05

420,00B270-300300729-0300-3405 #)557,00B270-300400729-0300-3505 #)693,00B270-300500729-0300-3605 #)827,00B270-300600729-0300-3705 #)

1.100,00B270-300800729-0300-3905 #)431,00B310-340300729-0340-3405 #)570,00B310-340400729-0340-3505 #)709,00B310-340500729-0340-3605 #)848,00B310-340600729-0340-3705 #)

1.128,00B310-340800729-0340-3905 #)440,00B340-370300729-0370-3405 #)582,00B340-370400729-0370-3505 #)724,00B340-370500729-0370-3605 #)866,00B340-370600729-0370-3705 #)

1.150,00B340-370800729-0370-3905 #)444,00B365-395300729-0395-3405 #)

Repair clam

ps


ALL STD

.

108 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/30


Note:# AISI 304

05

588,00B365-395400729-0395-3505 #)731,00B365-395500729-0395-3605 #)873,00B365-395600729-0395-3705 #)

1.161,00B365-395800729-0395-3905 #)456,00B395-425300729-0425-3405 #)604,00B395-425400729-0425-3505 #)752,00B395-425500729-0425-3605 #)900,00B395-425600729-0425-3705 #)

1.196,00B395-425800729-0425-3905 #)461,00B420-450300729-0450-3405 #)610,00B420-450400729-0450-3505 #)758,00B420-450500729-0450-3605 #)974,00B420-450600729-0450-3705 #)

1.207,00B420-450800729-0450-3905 #)502,00B440-470300729-0470-3405 #)665,00B440-470400729-0470-3505 #)827,00B440-470500729-0470-3605 #)990,00B440-470600729-0470-3705 #)

1.316,00B440-470800729-0470-3905 #)503,00B450-480300729-0480-3405 #)666,00B450-480400729-0480-3505 #)830,00B450-480500729-0480-3605 #)995,00B450-480600729-0480-3705 #)

1.322,00B450-480800729-0480-3905 #)514,00B475-505300729-0505-3405 #)681,00B475-505400729-0505-3505 #)848,00B475-505500729-0505-3605 #)

1.016,00B475-505600729-0505-3705 #)1.350,00B475-505800729-0505-3905 #)

524,00B500-530300729-0530-3405 #)694,00B500-530400729-0530-3505 #)866,00B500-530500729-0530-3605 #)

1.036,00B500-530600729-0530-3705 #)1.377,00B500-530800729-0530-3905 #)

525,00B510-540300729-0540-3405 #)696,00B510-540400729-0540-3505 #)868,00B510-540500729-0540-3605 #)

1.037,00B510-540600729-0540-3705 #)1.380,00B510-540800729-0540-3905 #)

531,00B520-550300729-0550-3405 #)704,00B520-550400729-0550-3505 #)878,00B520-550500729-0550-3605 #)

1.051,00B520-550600729-0550-3705 #)1.397,00B520-550800729-0550-3905 #)

536,00B530-560300729-0560-3405 #)709,00B530-560400729-0560-3505 #)884,00B530-560500729-0560-3605 #)

1.058,00B530-560600729-0560-3705 #)1.407,00B530-560800729-0560-3905 #)

542,00B540-570300729-0570-3405 #)718,00B540-570400729-0570-3505 #)894,00B540-570500729-0570-3605 #)

1.070,00B540-570600729-0570-3705 #)1.424,00B540-570800729-0570-3905 #)

546,00B560-590300729-0590-3405 #)724,00B560-590400729-0590-3505 #)902,00B560-590500729-0590-3605 #)

1.079,00B560-590600729-0590-3705 #)1.434,00B560-590800729-0590-3905 #)

548,00B570-600300729-0600-3405 #)727,00B570-600400729-0600-3505 #)906,00B570-600500729-0600-3605 #)

1.084,00B570-600600729-0600-3705 #)1.440,00B570-600800729-0600-3905 #)

560,00B580-610300729-0610-3405 #)744,00B580-610400729-0610-3505 #)928,00B580-610500729-0610-3605 #)

1.111,00B580-610600729-0610-3705 #)1.479,00B580-610800729-0610-3905 #)

562,00B590-620300729-0620-3405 #)747,00B590-620400729-0620-3505 #)933,00B590-620500729-0620-3605 #)

1.118,00B590-620600729-0620-3705 #)1.488,00B590-620800729-0620-3905 #)

563,00B600-630300729-0630-3405 #)749,00B600-630400729-0630-3505 #)936,00B600-630500729-0630-3605 #)

1.222,00B600-630600729-0630-3705 #)1.494,00B600-630800729-0630-3905 #)

755,00B610-640300729-0640-3405 #)567,00B610-640400729-0640-3505 #)943,00B610-640500729-0640-3605 #)

Repair clam

ps


ALL STD

.

109 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/30


Note:# AISI 304

05

1.131,00B610-640600729-0640-3705 #)1.508,00B610-640800729-0640-3905 #)

570,00B610-640300729-0650-3405 #)739,00B610-640400729-0650-3505 #)951,00B610-640500729-0650-3605 #)

1.141,00B610-640600729-0650-3705 #)1.521,00B610-640800729-0650-3905 #)

574,00B630-660300729-0660-3405 #)766,00B630-660400729-0660-3505 #)957,00B630-660500729-0660-3605 #)

1.149,00B630-660600729-0660-3705 #)1.532,00B630-660800729-0660-3905 #)

577,00B640-670300729-0670-3405 #)769,00B640-670400729-0670-3505 #)962,00B640-670500729-0670-3605 #)

1.155,00B640-670600729-0670-3705 #)1.541,00B640-670800729-0670-3905 #)

578,00B650-680300729-0680-3405 #)773,00B650-680400729-0680-3505 #)968,00B650-680500729-0680-3605 #)

1.163,00B650-680600729-0680-3705 #)1.545,00B650-680800729-0680-3905 #)

583,00B660-690300729-0690-3405 #)779,00B660-690400729-0690-3505 #)975,00B660-690500729-0690-3605 #)

1.171,00B660-690600729-0690-3705 #)1.564,00B660-690800729-0690-3905 #)

587,00B670-700300729-0700-3405 #)785,00B670-700400729-0700-3505 #)983,00B670-700500729-0700-3605 #)

1.181,00B670-700600729-0700-3705 #)1.576,00B670-700800729-0700-3905 #)

592,00B680-710300729-0710-3405 #)791,00B680-710400729-0710-3505 #)990,00B680-710500729-0710-3605 #)

1.190,00B680-710600729-0710-3705 #)1.588,00B680-710800729-0710-3905 #)

596,00B690-720300729-0720-3405 #)797,00B690-720400729-0720-3505 #)998,00B690-720500729-0720-3605 #)

1.199,00B690-720600729-0720-3705 #)1.600,00B690-720800729-0720-3905 #)

600,00B700-730300729-0730-3405 #)803,00B700-730400729-0730-3505 #)

1.005,00B700-730500729-0730-3605 #)1.207,00B700-730600729-0730-3705 #)1.612,00B700-730800729-0730-3905 #)

605,00B710-740300729-0740-3405 #)809,00B710-740400729-0740-3505 #)

1.013,00B710-740500729-0740-3605 #)1.217,00B710-740600729-0740-3705 #)1.624,00B710-740800729-0740-3905 #)

614,00B720-750300729-0750-3405 #)820,00B720-750400729-0750-3505 #)

1.026,00B720-750500729-0750-3605 #)1.232,00B720-750600729-0750-3705 #)1.643,00B720-750800729-0750-3905 #)

623,00B730-760300729-0760-3405 #)831,00B730-760400729-0760-3505 #)

1.039,00B730-760500729-0760-3605 #)1.247,00B730-760600729-0760-3705 #)1.662,00B730-760800729-0760-3905 #)

632,00B740-770300729-0770-3405 #)842,00B740-770400729-0770-3505 #)

1.051,00B740-770500729-0770-3605 #)1.260,00B740-770600729-0770-3705 #)1.679,00B740-770800729-0770-3905 #)

647,00B750-780300729-0780-3405 #)858,00B750-780400729-0780-3505 #)

1.069,00B750-780500729-0780-3605 #)1.280,00B750-780600729-0780-3705 #)1.703,00B750-780800729-0780-3905 #)

651,00B760-790300729-0790-3405 #)863,00B760-790400729-0790-3505 #)

1.076,00B760-790500729-0790-3605 #)1.289,00B760-790600729-0790-3705 #)1.715,00B760-790800729-0790-3905 #)

659,00B770-800300729-0800-3405 #)874,00B770-800400729-0800-3505 #)

1.089,00B770-800500729-0800-3605 #)1.304,00B770-800600729-0800-3705 #)1.734,00B770-800800729-0800-3905 #)

Repair clam

ps


ALL STD

.

110 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Tmm

Lmm

AVK ref. nos.Type

Series 729/30


Note:# AISI 304

05

666,00B780-810300729-0810-3405 #)883,00B780-810400729-0810-3505 #)

1.100,00B780-810500729-0810-3605 #)1.317,00B780-810600729-0810-3705 #)1.750,00B780-810800729-0810-3905 #)

672,00B790-820300729-0820-3405 #)890,00B790-820400729-0820-3505 #)

1.109,00B790-820500729-0820-3605 #)1.327,00B790-820600729-0820-3705 #)1.764,00B790-820800729-0820-3905 #)

678,00B800-830300729-0830-3405 #)898,00B800-830400729-0830-3505 #)

1.117,00B800-830500729-0830-3605 #)1.336,00B800-830600729-0830-3705 #)1.775,00B800-830800729-0830-3905 #)

685,00B810-840300729-0840-3405 #)906,00B810-840400729-0840-3505 #)

1.127,00B810-840500729-0840-3605 #)1.348,00B810-840600729-0840-3705 #)1.790,00B810-840800729-0840-3905 #)

Repair clam

ps


ALL STD

.

111 2007-07-10 10:47 CET

Gross priceEUR

Deliv.-code

Units pr.pallet


AVK ref. nos.Type

Series 80/33


Note:# Standard

01

38,00A48380-33-03200 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


AVK ref. nos.Type

Series 80/34

Surface Box forgate valves acc. to DIN 3581Housing in PALid in GG-20

Note:# Standard

01

57,00A30680-34-03200 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


AVK ref. nos.Type

Series 80/34

Surface Box for gatevalves acc. to DIN 3581Housing in PALid in GG-20


02

77,00A30780-34-13000 #)

Gross priceEUR

Deliv.-code

Units pr.pallet


AVK ref. nos.Type

Series 80/35

Surface Box forgate valves acc.to DIN 3582Housing in PALid in GG-20

Note:# Standard

01

B080-35-03204 #)

Surface boxes

Products for gas according to ALL STD.

ALL STD

.

112 2007-07-10 10:47 CET

Gross priceEUR

Units pr.pallet


Deliv.-code

AVK ref. nos.Type

Series 80/46


Note:# With spindle

fixation. Fortype 80/31,80/32, 80/33and 80/34

01

8,00601A80-46-00001 #)

Gross priceEUR

Units pr.pallet


Deliv.-code

AVK ref. nos.Type

Series 80/46


Note:# For type 80/31,

80/32, 80/33and 80/34

02

8,001A80-46-00000 #)

Gross priceEUR

Units pr.pallet


Deliv.-code

AVK ref. nos.Type

Series 80/46


Note:# For type 80/30

and 80/35

03

17,002A80-46-00005 #)

Surface boxes

Products for gas according to ALL STD.

ALL STD

.

113 2007-07-10 10:47 CET

A V K I n t e r n A t I o n A l

Duct i l e I ron F i t t i ngs

AVK 's P roduc t P rogramme

meets Your Requ i rements

S h o t b l a s t i n g

Sewage Treatment

Gate valves, knife valves, air valves,

check valves, butterfly valves etc.

Two of AVK's four segments:

Water Supply


air valves, swing check valves,

hydrants, butterfly valves etc.

AVK

AVK is one of the leading valve and fittings manufacturers

for the water, gas and sewage industries as well as Fire

Protection worldwide.

Our product programme comprises a wide range of

valves, hydrants, pipe fittings and accessories, each

complying with the highest standards of safety and

durability.

The AVK product programme also comprises a wide

range of fittings in ductile iron for the water- and sewage

supply. The product programme is approved according

to DVGW W270 for use in the drinking water supply.

Test on shot blasting

AVK - Supp l i e r o f H igh

Qua l i t y P roduc ts

D i s p a t c h

C o a t i n g C o a t i n g i n s p e c t i o n

When it comes to quality at AVK, nothing is left to chance.

The raw material delivered at our high-performance factory

is tested thoroughly, and random samples are run; a.o.

pressure tests.

Prior to coating, the cast parts are blast cleaned in our

full-automatic shot blaster according to the international

standard DIN 55928 SA 2.5. After blast cleaning, the parts

are applied internal coating according to DIN 3476 and

external coating according to DIN 30677-1. Additionally,

our coating is approved and monitored according to the

GSK guidelines for RAL-GZ 662.

After coating, the products are tested for a correct coating

thickness before dispatch.

Introduction

60 3 84 M 20

80 3 84 M 20

100 3 84 M 20

125 4 84 M 20

150 6 84 M 20

200 6 84 M 20

250 8 84 M 20

300 8 84 M 20

350 10 97 M 20

400 12 97 M 20

500 14 97 M 20

600 16 97 M 20

L D

Standards The fittings included in this catalogue are according to the European standard en 545 and en 12842 for UPVC fittings which specifies the requirements and associated test methods applicable to ductile iron pipes, fittings, accessories and their joints for construction of pipelines:

- to convey water (e.g. potable water); - with or without pressure; - to be installed below or above ground; - suitable for fluid temperatures between 0°C and 50°C, excluding frost.

The fittings are produced in the size range stated under each section. Sizes up to and including DN 2000 can be supplied on request.

The standardized nominal sizes (DN) for fittings are as follows:

40, 50, 60, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1500, 1600, 1800 and 2000.

All fittings are made of ductile iron, cast iron GGG and produced according to EN 545 and EN 12842.

Flanges and drillings are according to ISO 7005-2 PN 10 or PN 16.

Both fixed and turnable flanges are available. Please see each section.

Spigot ends are according to ISO 2531 for cast iron pipes. Mobile flanged fittings are according to DIN EN 1092-2.

Sockets for cast iron pipes are Tyton sockets according to DIN 28603. Fittings with TYTON sockets are not supplied with seating rings.

Sockets for PVC pipes are Euro sockets

Fittings for UPVC-pipes are supplied with sealing rings. All fittings are pressure tested according to EN 545. Face to face dimensions are stated under each section, with the tolerance given in Table 1.

Coating All fittings are epoxy coated blue RAL 5017 internally and externally min 250 micron. For coating according to DIN 30677 part 2, and GSK guidelines.

All fittings are marked according to the European standard EN 545.

All joints are designed to be fully flexible; consequently, the allowable angular deflection must not exceed:

3,5 gr. for DN 40 to DN 300 2,5 gr. for DN 350 to DN 600 1,5 gr. for DN 700 to DN 2000

Please note that all fittings are subject to technical changes which may cause weight changes.

Mechanical joints for ductile iron pipes The mechanical joint used in ductile iron pipes is based on the well-known gland and packing principle. A wedge-shaped rubber gasket with two areas of different hardness, located in the fitting socket is com-pressed against the pipe spigot by means of a flanged gland, bolts, and nuts.

The design of the bolt and the nut is patented and consists of a blind nut which protects the thread against corrosion, and a nonturning bolt which makes installation very easy. The dimensions of the bolt are given in Table 2.

Seal is guaranteed while permitting deflections up to:

5°C for DN 50 to DN 150 4°C for DN 200 to DN 300 3°C for DN 350 to DN 500 2°C for DN 600

note: Designed to be used only with ductile iron pipes according to DIn.

The mechanical joint uses a nonturning bolt which makes installation very easy.

Table 2Table 1

type of fitting Dn Deviation (mm.)

Flanged sockets 40 to 1200 ± 25 Flanged spigots 1400 to 2000 ± 35 Collars, tapers

Tees 40 to 1200 + 50/- 25 1400 to 2000 + 75/- 35

Bends 90° (1/4) 40 to 2000 ± (15 + 0,03 DN) Bends 45° (1/8) 40 to 2000 ± (10 + 0,025 DN)

Bends 22° 30' and 40 to 1200 ± (10 + 0,02 DN) 11° 15' (1/16 and 1/32) 1400 to 2000 ± (10 + 0,025 DN)

Dn no. of bolts l D

Introduction

Price list 2006Introduction

Delivery concept

Assorted container 15-20 tonnes FOB Nanjing Packing included in prices Recyclable, non returnable packing Delivery time 14 weeks

Full pallets. Units pr. pallet according to price list Packing included in prices Recyclable, non returnable packing Min. net order size: EURO 10.000,- Delivery time 4 weeks for stocked items

Assorted pallets Picking fee net pr. order line: EURO 10,- Packing at extra charge Recyclable, non returnable packing Delivery time 2 weeks for stocked items

All Fittings are labeled with bar code.

Designed according to EN 12842 EN 12842


Water

712/7011, EN-KS, Duckfoot bendflanged socket 90 for UPVCpipes according to EN 12842

1

712/7511, E-KS, Flanged socketpiece for UPVC pipes, accordingto EN 12842

1

712/7512, F-KS, Flanged spigotfor UPVC pipes, according to EN12842

2

712/0130, MMK-KS, Doublesocket bend 11.25 for UPVCpipes, according to EN 12842

2

712/0230, MMK-KS, Doublesocket bend 22.5 for UPVC pipesaccording to EN 12842

3

712/0430, MMK-KS, Doublesocket bend 45 for UPVC pipesaccording to EN 12842

3

712/0630, MMK-KS, Doublesocket bend 90 for UPVC pipesaccording to EN 12842

4

712/1030, MMB-KS, Socket Teewith socket branch for UPVCpipes according to EN 12842

4

712/2030, MMR-KS, Doublesocket reducer for UPVC pipes,according to EN 12842

5

Gross priceEUR


PN bar

W1mm

H3mm

H2mm

Ddmm

DN mm

AVK ref. nos.Type

Series 712/7011

EN-KSDuckfoot bend flangedsocket 90 for UPVCpipes according to EN12842Standard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-150

1

83,001110/162602881089080712-0080-70111171,002510/16295320120110150712-0150-70111103,001610/16300340120160100712-0152-70111

Gross priceEUR


PN bar

Zmm

Lmm

Ddmm

DN mm

AVK ref. nos.Type

Series 712/7511

E-KSFlanged socketpiece for UPVCpipesaccording to EN12842Standard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-300

1

28,00310/16151066350712-0050-7511128,00410/16151127560712-0060-7511128,00410/16151127565712-0065-7511130,00510/16151219080712-0080-7511135,00610/1615126110100712-0100-7511154,00810/1620139125125712-0125-7511154,0091620147140125712-0140-7511162,00121635173160150712-0150-75111

101,00191040195200200712-0200-75110101,00191640195200200712-0200-75111105,00191040203225200712-0225-75110105,00191640203225200712-0225-75111167,00261050224250250712-0250-75110167,00261650224250250712-0250-75111214,00381060258315300712-0300-75110214,00381660258315300712-0300-75111

Fittings


EN 12842

1 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

Dmm

DN mm

AVK ref. nos.Type

Series 712/7512

F-KSFlanged spigot forUPVC pipesaccording to EN12842Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-600

1

28,00410/161266350712-0050-7512135,00410/161297565712-0065-7512135,00510/161409080712-0080-7512140,00710/16155110100712-0100-7512159,00810/16168140125712-0140-7512162,001010/16169160150712-0150-7512195,001610200200200712-0200-7512095,001616200200200712-0200-7512195,001710190225200712-0225-7512095,001716190225200712-0225-75121

194,002210225250250712-0250-75120194,002216225250250712-0250-75121194,002810246280250712-0280-75120194,002816246280250712-0280-75121228,002910233315300712-0300-75120228,002916233315300712-0300-75121566,005210270400400712-0400-75120651,005216270400400712-0400-75121566,005610270450400712-0451-75120651,005616270450400712-0451-75121702,008410320500500712-0500-75120807,008416320500500712-0500-75121

1.693,0011210320630600712-0600-751201.947,0011216320630600712-0600-75121

Gross priceEUR


PN bar

Zmm

Ddmm

DN mm

AVK ref. nos.Type

Series 712/0130

MMK-KSDouble socketbend 11.25 forUPVC pipesaccording to EN12842Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300

1

37,00316206350712-0050-0130137,00416257565712-0065-0130137,00516259080712-0080-0130139,0061630110100712-0100-0130150,0071630125125712-0125-0130152,0091630140125712-0140.0130164,00111630160150712-0150-0130198,00171630200200712-0200-01301

141,00201640225200712-0225-01301251,00281640250250712-0250-01301318,00431655315300712-0300-01301

Fittings


EN 12842

2 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Zmm

Ddmm

DN mm

AVK ref. nos.Type

Series 712/0230

MMK-KSDouble socketbend 22.5 forUPVC pipesaccording to EN12842Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300

1

37,00316206350712-0050-0230137,00416257565712-0065-0230137,00516259080712-0080-0230139,0061630110100712-0100-0230150,0081630125125712-0125-0230152,0081630140125712-0140-0230164,00121635160150712-0150-02301

111,00161640200200712-0200-02301141,00191645225200712-0225-02301251,00271650250250712-0250-02301318,00461685315300712-0300-02301

Gross priceEUR


PN bar

Zmm

Ddmm

DN mm

AVK ref. nos.Type

Series 712/0430

MMK-KSDouble socketbend 45 forUPVC pipesaccording to EN12842Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 50-300

1

37,00316406350712-0050-0430137,00416407565712-0065-0430137,00616509080712-0080-0430150,0071660110100712-0100-0430152,0091665125125712-0125-0430159,00111665140125712-0140-0430185,00161670160150712-0150-04301

107,00201670200200712-0200-04301154,00241680225200712-0225-04301251,003516110250250712-0250-04301360,005116135315300712-0300-04301

Fittings


EN 12842

3 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Zmm

Ddmm

DN mm

AVK ref. nos.Type

Series 712/0630

MMK-KSDouble socketbend 90 forUPVC pipesaccording to EN12842Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 50-300

1

37,00416656350712-0050-0630142,00516757565712-0065-0630176,00616909080712-0080-0630150,0081683110100712-0100-0630174,001016110125125712-0125-0630180,001216110140125712-0140-06301

198,001616130160150712-0150-06301141,002616160200200712-0200-06301184,002716160225200712-0225-06301263,004216185250250712-0250-06301403,005916215315300712-0300-06301

Gross priceEUR


PN bar

Zmm

W1mm

Lmm

Ddtmm

Ddmm

AVK ref. nos.Type

Series 712/1030

MMB-KSSocket Tee withsocket branchfor UPVC pipesaccording to EN12842Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 63-200

1

33,0041670372536363712-0050-1030142,0061685512807575712-0065-1030138,0061670452646375712-0066-1030153,00716105603199090712-0080-1030149,0081690503027590712-0081-1030143,0081675542916390712-0082-1030167,0091612560348110110712-0100-1030161,009161056233190110712-0101-1030157,00916906031275110712-0102-1030154,00916756029963110712-0103-1030199,00121615072388125125712-0125-1030196,00121612570365110125712-0126-1030180,0010161057034690125712-0127-1030176,001116757031363125712-0129-1030198,00151615076410140140712-0140-1030198,00161615075404125140712-0141-1030196,00131612575379110140712-0142-1030180,0014161057535990140712-0143-10301

132,00181617586452160160712-0150-10301118,00161612586403125160712-0151-10301109,00151612585402110160712-0152-10301106,0015161058538590160712-0153-10301128,00171615085426140160712-0159-10301239,002616240105550200200712-0200-10301214,002916210105520160200712-0201-10301163,002616160105470125200712-0202-10301163,002716160105470110200712-0203-10301163,00251614010545090200712-0204-10301213,002716185105495140200712-0212-10301

Fittings


EN 12842

4 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Zmm

Lmm

Dd2mm

Dd1mm

AVK ref. nos.Type

Series 712/2030

MMR-KSDouble socketreducer forUPVC pipesaccording to EN12842Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 75-250

1

25,00416262127563712-0066-2030131,00516252269063712-0081-2030129,00516222279075712-0082-2030140,007163525211090712-0101-2030137,006163824211075712-0102-2030137,006163324211063712-0103-2030154,0081640275125110712-0126-2030154,007164527512590712-0127-2030154,007165527612575712-0128-2030162,0091640291140125712-0141-2030154,0091640283140110712-0142-2030154,007164528314090712-0143-2030173,00101640302160125712-0151-2030173,00111650304160110712-0152-2030167,0011165530416090712-0153-2030174,00101640310160140712-0159-20301

121,00201670368200160712-0201-20301116,00151675354200125712-0202-20301106,00131685356200110712-0203-20301106,0011169536120090712-0204-20301121,00211670376225160712-0228-20301116,00171675370225140712-0229-20301116,00171680367225125712-0230-20301108,00191684364225110712-0231-20301232,00251680414250200712-0251-20301224,00301690407250160712-0252-20301

Fittings


EN 12842

5 2007-07-10 11:28 CET


545


Water

712/0110, FFK, Double flangedbend 11 according to DIN 545

7


7


8

712/0410, FFK, Double flangedbend 45, according to DIN 545

8

712/0610, Q, Double flangedbend 90, according to DIN 545

9

712/1010, T, All flanged Tee,according to DIN 545 serie A

9

712/1110, TT, All flanged Teewith flanged branch

11

712/1510, TT, Flanged Cross withflanged branch

12

712/1610, TT, Flanged Cross withflanged branch

13

712/2210, FFR, Double flangereducer according to DIN 545

13

712/3450, XR, Adaption flangedouble, According to DIN 1092-2

14

712/3550, XR, Reducer flange15

712/3810, X, Blind flange,According to DIN EN 545

16

712/3910, XI, Taped flange, Blindflange with internal thread, BSPthread ½" (15x21)

16

712/4010, FF, Double flange pipe,according to DIN 545

22


23


24


25


25


26


26


27


28


28


29


29


30

712/6010, FF-WP, Flanged pipewith wall sleeve

30

712/6110, FF-WP, Flanged pipewith wall sleeve

31

Designed according to EN 545

EN 545


712/7010, N, Duckfoot bendflanged, according to DIN EN 545

31

712/7513, F, Flanged spigotaccording to DIN 545 series A

32

712/0120, FFK, Double flangedbend with mobile flanges11

32

712/0220, FFK, Double flangedbend 22 with mobile flanges

33

712/0420, FFK, Double flangedbend 45 with mobile flanges

33

712/0620, Q, Double flangedbend 90, with mobile flanges

34

712/1020, T, All flanged Tee, withmobile flanges

34

712/1031, MMA-KS, Socket Teewith mobile flange branch forUPVC pipes according to EN

35

712/2220, FFR, Double flangereducer, with mobile flanges

36

712/4320, FF, Double flange pipewith mobile flanges

37

712/7020, N, Duckfoot bend withmobile flanges

37

712/7520, S, S-piece with mobileflanges

38

712/0140, MMK, Double socketbend 11.25 with Tyton socketsaccording to EN 545 series A

38

712/0240, MMK, Double socketbend 22.5 with Tyton socketsaccording to EN 545 series A

39

712/0340, MMK, Double socketbend 30 with Tyton socketsaccording to DIN 545 series A

39

712/0440, MMK, Double socketbend 45 with Tyton socketsaccording to EN 545 series A

40

712/0640, MMQ, Double socketbend 90 with Tyton socketsaccording to EN 545 series A

40

712/1040, MMB, Tyton socketTee with socket branchaccording to EN 545 series A

41

712/1042, MMA, Tyton SocketTee with flanged branchaccording to EN 545 series A

41

712/2040, MMR, Double socketreducer with Tyton socketaccording to EN 545 series A

43

712/3240, TY-C, Female end capwith Tyton socket

43

712/7014, EN, Duckfoot bendflanged with Tyton socket

44

712/7514, EU, Flanged socketwith Tyton socket according toEN 545 series A

44

712/7540, U, Double sockedcollar with Tyton sockets

45

712/7519, EU, Flanged MecanicalJoint, Socket for DI pipes

45

712/7563, EU, Flanged coupling,non tensile, Mecanical Joint forDI pipes

46

712/0160, MMK, Double socketbend 11.25 Mecanical Joint for DIpipes

46

712/0260, MMK, Double socketbend 22½, Mecanical Joint for DIpipes

47

712/0460, MMK, Double socketbend 45, Mecanical Joint for DIpipes

47

712/0660, MMQ, Double socketbend 90, Mecanical Joint for DIpipes

48


545


712/1060, MMB, Socket Tee,Mecanical Joint for DI pipes

48

712/1061, MMA, Socket Tee withflanged branch, Mecanical Jointfor DI pipes

49

712/2960, MMR, Double socketreducer Mecanical Joint for DIpipes

50

712/3060, EX, Female End Cap,Mecanical Joint for DI pipes

50

712/3141, EX, End Cap,Mecanical Joint for DI pipes

51

712/7060, EN, Duckfoot SocketBend, Mecanical Joint for DIpipes

51

712/7560, U, Double socketMecanical Joint for DI pipes

52

712/7564, EU, Double Flangedcoupling, non tensile, MecanicalJoint for DI pipes

52

78/82, Concrete Wall sleve withpuddle flange

53

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0110

FFKDouble flanged bend 11according to DIN 545Standard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesDN 40-600

1

130,00610/169940712-0040-01101140,00710/1610950712-0050-01101140,00910/1612465712-0065-01101112,001010/1611380712-0080-01101127,001210/16115100712-0100-01101193,001510/16111125712-0125-01101206,002010/16113150712-0150-01101339,002910132200712-0200-01100339,002916132200712-0200-01101550,005110165250712-0250-01100550,005116165250712-0250-01101715,008210175300712-0300-01100715,008216175300712-0300-01101785,007910191350712-0350-01100903,007916191350712-0350-01101910,0010110205400712-0400-01100

1.047,0010116205400712-0400-011011.237,0013310135500712-0500-011001.423,0013316135500712-0500-011013.233,0021110174600712-0600-011003.718,0021116174600712-0600-01101

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0210

FFKDouble flanged bend22 according to DIN545Standard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-600

1

130,00610/169440712-0040-02101140,00710/1610450712-0050-02101140,00910/1611965712-0065-02101112,001010/1610580712-0080-02101127,001210/16110100712-0100-02101193,001510/16105125712-0125-02101206,002010/16109150712-0150-02101339,002810131200712-0200-02100339,002816131200712-0200-02101512,005110190250712-0250-02100512,005116190250712-0250-02101715,008510210300712-0300-02100715,008516210300712-0300-02101800,008410210350712-0350-02100920,008416210350712-0350-02101963,0011010239400712-0400-02100

1.107,0011016239400712-0400-021011.319,0015010185500712-0500-021001.517,0015016185500712-0500-021013.233,0024810254600712-0600-021003.718,0024816254600712-0600-02101

Fittings


EN 545

7 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0310

FFKDouble flanged bend 30according to DIN 545Standard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 andGSK guide linesDN 40-600

1

130,00710/1614040712-0040-03101140,00810/1615050712-0050-03101140,001110/1616565712-0065-03101112,001110/1613080712-0080-03101127,001210/16140100712-0100-03101193,001810/16150125712-0125-03101206,002210/16160150712-0150-03101339,003210180200712-0200-03100339,003216180200712-0200-03101506,004710210250712-0250-03100506,004716210250712-0250-03101715,006810255300712-0300-03100715,006816255300712-0300-03101887,008510217350712-0350-03100

1.020,008516217350712-0350-031011.064,0013010324400712-0400-031001.224,0013016324400712-0400-031011.600,0017810273500712-0500-031001.840,0017816273500712-0500-031013.233,0025510279600712-0600-031003.718,0025516279600712-0600-03101

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0410

FFKDouble flanged bend 45according to DIN 545Standard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 andGSK guide linesDN 40-600

1

130,00610/1614040712-0040-0410184,00810/1615050712-0050-0410198,001010/1616565712-0065-0410179,001010/1613080712-0080-0410190,001210/16140100712-0100-04101

119,001710/16150125712-0125-04101146,001910/16160150712-0150-04101253,003010180200712-0200-04100253,003016180200712-0200-04101387,005910350250712-0250-04100387,005916350250712-0250-04101472,008410400300712-0300-04100472,008416400300712-0300-04101

1.025,009710298350712-0350-041001.179,009716298350712-0350-041011.058,0012710324400712-0400-041001.217,0012716324400712-0400-041011.878,0020710375500712-0500-041002.160,0020716375500712-0500-041013.093,0031210426600712-0600-041003.553,0031216426600712-0600-04101

Fittings


EN 545

8 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0610

QDouble flanged bend 90according to DIN 545Standard flange drilling to ISO 7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 40-600

1

52,00610/1614040712-0040-0610159,00810/1615050712-0050-0610171,001010/1616565712-0065-0610179,001010/1616580712-0080-0610190,001310/16180100712-0100-06101

129,001810/16200125712-0125-06101146,002110/16220150712-0150-06101253,003210260200712-0200-06100253,003216260200712-0200-06101387,005410350250712-0250-06100387,005416350250712-0250-06101472,007610400300712-0300-06100472,007616400300712-0300-06101791,0011310450350712-0350-06100910,0011316450350712-0350-06101

1.058,0014810500400712-0400-061001.217,0014816500400712-0400-061011.868,0024810600500712-0500-061002.148,0024816600500712-0500-061013.711,0038110700600712-0600-061004.268,0038116700600712-0600-06101

Gross priceEUR


PN bar

Hmm

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/1010

TAll flanged Teeaccording to DIN 545 serie AStandard flange drilling to ISO 7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 40-600

1

79,00910/161402804040712-0040-1010190,001210/161503005050712-0050-1010194,001110/161453004050712-0051-10101

103,001510/161653306565712-0065-10101103,001410/161583305065712-0066-10101123,001310/161533304065712-0067-1010195,001610/161653308080712-0080-1010195,001610/161603306580712-0081-1010188,001510/161603305080712-0082-10101

100,001510/161553304080712-0083-10101105,002010/16180360100100712-0100-10101102,001910/1617536080100712-0101-10101114,001910/1617036065100712-0102-10101102,001810/1617036050100712-0103-10101113,001810/1617036040100712-0104-10101145,002710/16200400125125712-0125-10101137,002610/16195400100125712-0126-10101129,002410/1619040080125712-0127-10101189,002410/1618540065125712-0128-10101137,002310/1618540050125712-0129-10101180,002310/1618540040125712-0130-10101185,003410/16220440150150712-0150-10101175,003310/16215440125150712-0151-10101164,003110/16210440100150712-0152-10101164,003010/1620544080150712-0153-10101262,003010/1620044065150712-0154-10101179,002810/1620044050150712-0155-10101265,005210260520200200712-0200-10100265,005216260520200200712-0200-10101256,004810250520150200712-0201-10100256,004816250520150200712-0201-10101256,004610245520125200712-0202-10100256,004616245520125200712-0202-10101253,004510240520100200712-0203-10100253,004516240520100200712-0203-10101252,00441023552080200712-0204-10100252,00441623552080200712-0204-10101508,008910350700250250712-0250-10100508,008916350700250250712-0250-10101477,008310325700200250712-0251-10100477,008316325700200250712-0251-10101477,007710300700150250712-0252-10100477,007716300700150250712-0252-10101459,007410275700100250712-0254-10100459,007416275700100250712-0254-10101459,00681026570080250712-0255-10100

Fittings


EN 545

9 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Hmm

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/1010

TAll flanged Teeaccording to DIN 545 serie AStandard flange drilling to ISO 7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 40-600

1

459,00681626570080250712-0255-10101600,0012710400800300300712-0300-10100600,0012716400800300300712-0300-10101600,0011710375800250300712-0301-10100600,0011716375800250300712-0301-10101575,0011110350800200300712-0302-10100575,0011116350800200300712-0302-10101569,0010510325800150300712-0303-10100569,0015016325800150300712-0303-10101525,0010210300800100300712-0305-10100525,0010216300800100300712-0305-10101525,001001029080080300712-0306-10100525,001001629080080300712-0306-10101

1.457,0015510425850300350712-0349-101001.676,0015516425850300350712-0349-101011.457,0016510425850350350712-0350-101001.676,0016516425850350350712-0350-101011.457,0014210325850250350712-0352-101001.676,0014216325850250350712-0352-101011.126,0013810325850200350712-0353-101001.296,0013816325850200350712-0353-101011.126,0013410325850150350712-0354-101001.295,0013416325850150350712-0354-101011.118,0013110325850100350712-0356-101001.286,0013116325850100350712-0356-101011.118,001301032585080350712-0357-101001.286,001301632585080350712-0357-101011.622,0020710450900400400712-0400-101001.865,0020716450900400400712-0400-101011.622,0019810450900350400712-0401-101001.865,0019816450900350400712-0401-101011.622,0016010450900300400712-0402-101001.865,0016016450900300400712-0402-101011.622,0017510350900250400712-0403-101001.865,0017516350900250400712-0403-101011.441,0015010350900200400712-0404-101001.657,0015016350900200400712-0404-101011.441,0016810350900150400712-0405-101001.657,0016816350900150400712-0405-101011.433,0016510350900100400712-0407-101001.648,0016516350900100400712-0407-101011.433,001641035090080400712-0408-101001.648,001641635090080400712-0408-101012.458,00326105001000500500712-0500-101002.827,00326165001000500500712-0500-101012.249,00299105001000400500712-0502-101002.586,00299165001000400500712-0502-101012.993,00281105001000300500712-0504-101003.442,00281165001000300500712-0504-101012.230,00269104001000250500712-0505-101002.564,00269164001000250500712-0505-101012.162,00265104001000200500712-0506-101002.486,00265164001000200500712-0506-101012.763,00262104001000150500712-0507-101003.177,00262164001000150500712-0507-101012.115,00259104001000100500712-0509-101002.432,00259164001000100500712-0509-101013.772,00477105501100600600712-0600-101004.338,00477165501100600600712-0600-101013.724,00418105501100400600712-0603-101004.283,00418165501100400600712-0603-101013.724,00402105501100300600712-0605-101004.283,00402165501100300600712-0605-101013.642,00385104501100200600712-0607-101004.188,00385164501100200600712-0607-101013.642,00380104501100100600712-0610-101004.188,00380164501100100600712-0610-10101

Fittings


EN 545

10 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Hmm

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/1110

TTAll flanged Teewith flangedbranchStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 100-600

1

251,002610/16180360100100712-0100-11101474,004010/16220440150150712-0150-11101474,003810/16210440100150712-0152-11101492,005810260520200200712-0200-11100492,005816260520200200712-0200-11101459,005310250520150200712-0201-11100459,005316250520150200712-0201-11101435,004910240520100200712-0203-11100435,004916240520100200712-0203-11101804,008310350700250250712-0250-11100804,008316350700250250712-0250-11101713,009010325700200250712-0251-11100713,009016325700200250712-0251-11101664,007910300700150250712-0252-11100664,007916300700150250712-0252-11101640,007410275700100250712-0254-11100640,007416275700100250712-0254-11101

1.041,0012510400800300300712-0300-111001.041,0012516400800300300712-0300-111011.041,0011610375800250300712-0301-111001.041,0011616375800250300712-0301-11101

951,0011010350800200300712-0302-11100951,0011016350800200300712-0302-11101910,0010610325800150300712-0303-11100910,0010616325800150300712-0303-11101886,0010110300800100300712-0305-11100886,0010116300800100300712-0305-11101

1.622,0021210450900400400712-0400-111001.865,0021216450900400400712-0400-111011.622,0019410450900300400712-0402-111001.865,0019416450900300400712-0402-111011.622,0018010350900250400712-0403-111001.865,0018016350900250400712-0403-111011.542,0017610350900200400712-0404-111001.773,0017616350900200400712-0404-111011.542,0017310350900150400712-0405-111001.773,0017316350900150400712-0405-111011.433,0017010350900100400712-0407-111001.648,0017016350900100400712-0407-111012.458,00331105001000500500712-0500-111002.827,00331165001000500500712-0500-111012.349,00304105001000400500712-0502-111002.701,00304165001000400500712-0502-111012.349,00289105001000300500712-0504-111002.701,00289165001000300500712-0504-111012.239,00273104001000250500712-0505-111002.575,00273164001000250500712-0505-111012.162,00270104001000200500712-0506-111002.486,00270164001000200500712-0506-111012.162,00267104001000150500712-0507-111002.486,00267164001000150500712-0507-111012.115,00264104001000100500712-0509-111002.432,00264164001000100500712-0509-111013.772,00482105501100600600712-0600-111004.338,00482165501100600600712-0600-111013.724,00423105501100400600712-0603-111004.283,00423165501100400600712-0603-111013.724,00406105501100300600712-0605-111004.283,00406165501100300600712-0605-111013.642,00390104501100200600712-0607-111004.188,00390164501100200600712-0607-111013.642,00385104501100100600712-0610-111004.188,00385164501100100600712-0610-11101

Fittings


EN 545

11 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Hmm

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/1510

TTFlanged Cross withflanged branchStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 andGSK guide linesDN 80-600

1

226,002310/161653308080712-0080-15101251,002710/16180360100100712-0100-15101240,002410/1617536080100712-0101-15101402,003510/16200400125125712-0125-15101474,004510/16220440150150712-0150-15101474,003610/16210440100150712-0152-15101625,006710260520200200712-0200-15100625,006716260520200200712-0200-15101625,005710250520150200712-0201-15100625,005716250520150200712-0201-15101625,005110240520100200712-0203-15100625,005116240520100200712-0203-15101

1.139,0011010350700250250712-0250-151001.139,0011016350700250250712-0250-151011.139,009310325700200250712-0251-151001.139,009316325700200250712-0251-151011.139,008310300700150250712-0252-151001.139,008316300700150250712-0252-151011.139,007510275700100250712-0254-151001.139,007516275700100250712-0254-151011.576,0014910400800300300712-0300-151001.576,0014916400800300300712-0300-151011.576,0013210375800250300712-0301-151001.576,0013216375800250300712-0301-151011.576,0011810350800200300712-0302-151001.576,0011816350800200300712-0302-151011.576,0010910325800150300712-0303-151001.576,0010916325800150300712-0303-151011.576,0010210300800100300712-0305-151001.576,0010216300800100300712-0305-151012.461,0025710450900400400712-0400-151002.461,0025716450900400400712-0400-151012.796,00400105001000500500712-0500-151002.796,00400165001000500500712-0500-151015.125,00579105501100600600712-0600-151005.125,00579165501100600600712-0600-15101

Fittings


EN 545

12 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Hmm

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/1610

TTFlanged Cross withflanged branchStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 100-600

1

287,003010/16180360100100712-0100-16101402,004010/16200400125125712-0125-16101474,005010/16220440150150712-0150-16101474,004210/16210440100150712-0152-16101625,007310260520200200712-0200-16100625,007316260520200200712-0200-16101625,006310250520150200712-0201-16100625,006316250520150200712-0201-16101625,006310240520100200712-0203-16100625,006316240520100200712-0203-16101

1.139,0011210350700250250712-0250-161001.139,0011216350700250250712-0250-161011.139,009810325700200250712-0251-161001.139,009816325700200250712-0251-161011.139,008810300700150250712-0252-161001.139,008816300700150250712-0252-161011.139,008010275700100250712-0254-161001.139,008016275700100250712-0254-161011.576,0015510400800300300712-0300-161001.576,0015516400800300300712-0300-161011.576,0013710375800250300712-0301-161001.576,0013716375800250300712-0301-161011.576,0012410350800200300712-0302-161001.576,0012416350800200300712-0302-161011.576,0011410325800150300712-0303-161001.576,0011416325800150300712-0303-161011.576,0010710300800100300712-0305-161001.576,0010716300800100300712-0305-161012.461,0026210450900400400712-0400-161002.830,0026216450900400400712-0400-161012.878,00405105001000500500712-0500-161003.310,00405165001000500500712-0500-161015.207,00587105501100600600712-0600-161005.988,00587165501100600600712-0600-16101

Gross priceEUR


PN bar

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/2210

FFRDouble flangereduceraccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-600

1

64,00610/162004050712-0051-2210172,00810/162005065712-0066-2210171,00710/162004065712-0067-2210163,00910/162006580712-0081-2210163,00810/162005080712-0082-2210163,00810/162004080712-0083-2210164,001010/1620080100712-0101-2210164,001010/1620065100712-0102-2210163,001010/1620050100712-0103-2210166,00910/1620040100712-0104-2210181,001310/16200100125712-0126-2210178,001210/1620080125712-0127-22101

100,001610/16200125150712-0151-2210194,001510/16200100150712-0152-2210193,001510/1620080150712-0153-2210187,001610/1632065150712-0154-2210185,001510/1634150150712-0155-22101

145,002410300150200712-0201-22100145,002416300150200712-0201-22101143,002210300125200712-0202-22100143,002216300125200712-0202-22101132,001610300100200712-0203-22100132,001616300100200712-0203-22101132,00191030080200712-0204-22100132,00191630080200712-0204-22101222,003310300200250712-0251-22100222,003316300200250712-0251-22101222,003310300150250712-0252-22100222,003316300150250712-0252-22101222,002910300125250712-0253-22100222,002916300125250712-0253-22101222,002810300100250712-0254-22100222,002816300100250712-0254-22101277,004410300250300712-0301-22100

Fittings


EN 545

13 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/2210

FFRDouble flangereduceraccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-600

1

277,004416300250300712-0301-22101271,003910300200300712-0302-22100271,003916300200300712-0302-22101271,003710300150300712-0303-22100271,003716300150300712-0303-22101271,003110300100300712-0305-22100271,003116300100300712-0305-22101482,005710300300350712-0349-22100554,005716300300350712-0349-22101554,006010300250350712-0352-22100554,006016300250350712-0352-22101734,005410300200350712-0353-22100734,005416300200350712-0353-22101424,005010300150350712-0354-22100424,005016300150350712-0354-22101565,008510300350400712-0401-22100650,008516300350400712-0401-22101551,007610300300400712-0402-22100634,007616300300400712-0402-22101551,006910300250400712-0403-22100634,006916300250400712-0403-22101541,006210300200400712-0404-22100622,006216300200400712-0404-22101841,0010610300400450712-0451-22100967,0010616300400450712-0451-22101812,008810300300450712-0453-22100934,008816300300450712-0453-22101

1.188,0016210600400500712-0502-221001.366,0016216600400500712-0502-221011.188,0015310600350500712-0503-221001.366,0015316600350500712-0503-221011.188,0014310600300500712-0504-221001.366,0014316600300500712-0504-221011.825,0025210600500600712-0601-221002.099,0025216600500600712-0601-221011.825,0021810600400600712-0603-221002.099,0021816600400600712-0603-22101

Gross priceEUR


PN bar

Dh2mm

Dhmm

Dmm

DN mm

AVK ref. nos.Type

Series 712/3450

XRAdaption flangedoubleAccording to DIN1092-2Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-200

Note:# Bolts standard zinc coated steel 8.8.

Optional SS A2 or A4

1

44,00910/1616016020080712-0080-34502061 #)171,001810/16295295340200712-0200-34500061 #)

Fittings


EN 545

14 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Dh2mm

Dhmm

Dmm

DN/DNmm

AVK ref. nos.Type

Series 712/3550

XRReducer flangeStandard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 60-300

Note:# Bolts standard zinc

coated steel 8.8.Optional SS A2 orA4

1

68,00610/1612513518550-60712-0061-35501061 #)59,00510/1611013518540-60712-0062-35501061 #)68,00610/1612514518550-65712-0066-35501061 #)59,00510/1611014518540-65712-0067-35501061 #)77,00510/1614516020065-80712-0081-35501061 #)72,00610/1614516020065-80712-0081-35502061 #)81,00610/1612516020050-80712-0082-35501061 #)68,00610/1612516020050-80712-0082-35502061 #)60,00510/1611016020040-80712-0083-35501061 #)54,00510/1611016020040-80712-0083-35502061 #)77,00510/1612516020060-80712-0086-35501061 #)72,00610/1612516020060-80712-0086-35502061 #)72,00810/1616018022080-100712-0101-35501061 #)72,00810/1616018022080-100712-0101-35502061 #)72,00610/1614518022065-100712-0102-35501061 #)54,00510/1611018022040-100712-0104-35501060 #)72,00610/1613518022060-100712-0107-35501061 #)

108,00910/16160210250100-125712-0126-35501061 #)95,00810/1616021025080-125712-0127-35501061 #)95,00810/1616021025080-125712-0127-35502061 #)72,00710/1614521025065-125712-0128-35501061 #)72,00710/1613521025060-125712-0133-35501061 #)

149,001210/16210240285125-150712-0151-35501061 #)113,00910/16180240285100-150712-0152-35501061 #)95,00910/1614524028580-150712-0153-35501060 #)90,00810/1616024028580-150712-0153-35502060 #)90,00910/1613524028565-150712-0154-35501060 #)90,00910/1618024028560-150712-0157-35501060 #)

167,001510240295340150-200712-0201-35500061 #)167,001516240295340150-200712-0201-35501061 #)153,001210210295340125-200712-0202-35500060 #)153,001216210295340125-200712-0202-35501060 #)144,001310180295340100-200712-0203-35500060 #)144,001316180295340100-200712-0203-35501060 #)144,00131016029534080-200712-0204-35500060 #)144,00131616029534080-200712-0204-35501060 #)140,00131616029534080-200712-0204-35502060 #)140,00131016029534080-200712-0204-35504060 #)140,00141014529534065-200712-0205-35500060 #)140,00141614529534065-200712-0205-35501060 #)140,00131013529534060-200712-0210-35500060 #)140,00131613529534060-200712-0210-35501060 #)244,002410295350405200-250712-0251-35500061 #)244,002416295350405200-250712-0251-35501061 #)203,002010240350405150-250712-0252-35500060 #)203,002016240350405150-250712-0252-35501060 #)307,003110350400460250-300712-0301-35500061 #)307,003116350400460250-300712-0301-35501061 #)231,002310295400460200-300712-0302-35500060 #)231,002316295400460200-300712-0302-35501060 #)

Fittings


EN 545

15 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Dmm

Lmm

DN mm

AVK ref. nos.Type

Series 712/3810

XBlind flangeAccording to DIN EN545Standard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 andGSK guide linesDN 40-600

1

16,00210/161501940712-0040-3810116,00310/161651950712-0050-3810120,00310/161751960712-0060-3810120,00310/161851965712-0065-3810120,00410/162001980712-0080-3810124,00510/1622019100712-0100-3810135,00610/1625019125712-0125-3810144,00810/1628519150712-0150-3810163,00111034020200712-0200-3810063,00111634020200712-0200-38101

120,00171040022250712-0250-38100120,00171640022250712-0250-38101160,00241045525300712-0300-38100160,00241645525300712-0300-38101360,00461056525400712-0400-38100360,00481658025400712-0400-38101496,00611067027500712-0500-38100496,00771671532500712-0500-38101672,00911078030600712-0600-38100672,001201684036600712-0600-38101

Gross priceEUR


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 712/3910

XITaped flangeBlind flange withinternal threadBSP thread ½"(15x21)Standard flangedrilling to ISO 7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-600

Note:# BSP thread ½" (15x21)

01

28,00210/1615040712-0040-39101005 #)29,00310/1616550712-0050-39101005 #)33,00310/1617560712-0060-39101005 #)33,00310/1618565712-0065-39101005 #)32,00410/1620080712-0080-39101005 #)37,00510/16220100712-0100-39101005 #)46,00610/16250125712-0125-39101005 #)56,00810/16285150712-0150-39101005 #)72,001110340200712-0200-39100005 #)72,001116340200712-0200-39101005 #)

133,001710400250712-0250-39100005 #)133,001716400250712-0250-39101005 #)173,002410455300712-0300-39100005 #)173,002416455300712-0300-39101005 #)373,004810580400712-0400-39100005 #)373,004816580400712-0400-39101005 #)509,007710780500712-0500-39100005 #)509,007716780500712-0500-39101005 #)686,0012010840600712-0600-39100005 #)686,0012016840600712-0600-39101005 #)

Fittings


EN 545

16 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 712/3910


Note:# BSP thread 3/4" (20x27)

05

28,00210/1615040712-0040-39101075 #)29,00310/1616550712-0050-39101075 #)33,00310/1617560712-0060-39101075 #)33,00310/1618565712-0065-39101075 #)32,00410/1620080712-0080-39101075 #)37,00510/16220100712-0100-39101075 #)46,00610/16250125712-0125-39101075 #)56,00810/16285150712-0150-39101075 #)72,001110340200712-0200-39100075 #)72,001116340200712-0200-39101075 #)

133,001710400250712-0250-39100075 #)133,001716400250712-0250-39101075 #)173,002410455300712-0300-39100075 #)173,002416455300712-0300-39101075 #)373,004810580400712-0400-39100075 #)373,004816580400712-0400-39101075 #)509,007710780500712-0500-39100075 #)509,007716780500712-0500-39101075 #)686,0012010840600712-0600-39100075 #)686,0012016840600712-0600-39101075 #)

Gross priceEUR


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 712/3910


Note:# BSP thread 1" (26x34)

10

28,00210/1615040712-0040-39101010 #)29,00310/1616550712-0050-39101010 #)33,00310/1617560712-0060-39101010 #)33,00310/1618565712-0065-39101010 #)32,00410/1620080712-0080-39101010 #)37,00510/16220100712-0100-39101010 #)46,00610/16250125712-0125-39101010 #)56,00810/16285150712-0150-39101010 #)72,001110340200712-0200-39100010 #)72,001116340200712-0200-39101010 #)

133,001710400250712-0250-39100010 #)133,001716400250712-0250-39101010 #)173,002410455300712-0300-39100010 #)173,002416455300712-0300-39101010 #)373,004810580400712-0400-39100010 #)373,004816580400712-0400-39101010 #)509,007710780500712-0500-39100010 #)509,007716780500712-0500-39101010 #)686,0012010840600712-0600-39100010 #)686,0012016840600712-0600-39101010 #)

Fittings


EN 545

17 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 712/3910


Note:# BSP thread 1.1/4" (33x42)

15

48,00310/1617560712-0060-39101015 #)48,00310/1618565712-0065-39101015 #)47,00410/1620080712-0080-39101015 #)52,00410/16220100712-0100-39101015 #)61,00610/16250125712-0125-39101015 #)71,00810/16285150712-0150-39101015 #)87,001110340200712-0200-39100015 #)87,001116340200712-0200-39101015 #)

148,001710400250712-0250-39100015 #)148,001716400250712-0250-39101015 #)188,002410455300712-0300-39100015 #)188,002416455300712-0300-39101015 #)388,004810580400712-0400-39100015 #)388,004816580400712-0400-39101015 #)524,007710780500712-0500-39100015 #)524,007716780500712-0500-39101015 #)701,0012010840600712-0600-39100015 #)701,0012016840600712-0600-39101015 #)

Gross priceEUR


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 712/3910


Note:# BSP thread 1½" (40x49)

20

44,00310/1616550712-0050-39101012 #)48,00310/1617560712-0060-39101012 #)48,00310/1618565712-0065-39101012 #)47,00410/1620080712-0080-39101012 #)52,00510/16220100712-0100-39101012 #)61,00610/16250125712-0125-39101012 #)71,00810/16285150712-0150-39101012 #)87,001110340200712-0200-39100012 #)87,001116340200712-0200-39101012 #)

148,001710400250712-0250-39100012 #)148,001716400250712-0250-39101012 #)188,002410455300712-0300-39100012 #)188,002416455300712-0300-39101012 #)388,004810580400712-0400-39100012 #)388,004816580400712-0400-39101012 #)524,007710780500712-0500-39100012 #)524,007716780500712-0500-39101012 #)701,0012010840600712-0600-39100012 #)701,0012016840600712-0600-39101012 #)

Fittings


EN 545

18 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 712/3910



25

48,00310/1617560712-0060-39101020 #)48,00310/1618565712-0065-39101020 #)47,00410/1620080712-0080-39101020 #)52,00510/16220100712-0100-39101020 #)61,00610/16250125712-0125-39101020 #)71,00810/16285150712-0150-39101020 #)87,001110340200712-0200-39100020 #)87,001116340200712-0200-39101020 #)

148,001710400250712-0250-39100020 #)148,001716400250712-0250-39101020 #)188,002410455300712-0300-39100020 #)188,002416455300712-0300-39101020 #)388,004810580400712-0400-39100020 #)388,004816580400712-0400-39101020 #)524,007710780500712-0500-39100020 #)524,007716780500712-0500-39101020 #)701,0012010840600712-0600-39100020 #)701,0012016840600712-0600-39101020 #)

Gross priceEUR


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 712/3910


Note:# BSP thread 2½" (66x76)

30

47,00410/1620080712-0080-39101025 #)52,00510/16220100712-0100-39101025 #)61,00610/16250125712-0125-39101025 #)71,00810/16285150712-0150-39101025 #)87,001110340200712-0200-39100025 #)87,001116340200712-0200-39101025 #)

148,001710400250712-0250-39100025 #)148,001716400250712-0250-39101025 #)188,002410455300712-0300-39100025 #)188,002416455300712-0300-39101025 #)388,004810580400712-0400-39100025 #)388,004816580400712-0400-39101025 #)524,007710780500712-0500-39100025 #)524,007716780500712-0500-39101025 #)701,0012010840600712-0600-39100025 #)701,0012016840600712-0600-39101025 #)

Fittings


EN 545

19 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 712/3910



35

52,00510/16220100712-0100-39101030 #)61,00610/16250125712-0125-39101030 #)71,00810/16285150712-0150-39101030 #)87,001110340200712-0200-39100030 #)87,001116340200712-0200-39101030 #)

148,001710400250712-0250-39100030 #)148,001716400250712-0250-39101030 #)188,002410455300712-0300-39100030 #)188,002416455300712-0300-39101030 #)388,004810580400712-0400-39100030 #)388,004816580400712-0400-39101030 #)524,007710780500712-0500-39100030 #)524,007716780500712-0500-39101030 #)701,0012010840600712-0600-39100030 #)701,0012016840600712-0600-39101030 #)

Gross priceEUR


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 712/3910



40

61,00610/16250125712-0125-39101041 #)71,00810/16285150712-0150-39101041 #)87,001110340200712-0200-39100041 #)87,001116340200712-0200-39101041 #)

148,001710400250712-0250-39100041 #)148,001716400250712-0250-39101041 #)188,002410455300712-0300-39100041 #)188,002416455300712-0300-39101041 #)388,004810580400712-0400-39100041 #)388,004816580400712-0400-39101041 #)524,007710780500712-0500-39100041 #)524,007716780500712-0500-39101041 #)701,0012010840600712-0600-39100041 #)701,0012016840600712-0600-39101041 #)

Fittings


EN 545

20 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 712/3910


Note:# PB thread (40x300)

45

37,00310/1616550712-0050-39101040 #)39,00310/1617560712-0060-39101040 #)39,00310/1618565712-0065-39101040 #)47,00410/1620080712-0080-39101040 #)52,00510/16220100712-0100-39101040 #)61,00610/16250125712-0125-39101040 #)71,00810/16285150712-0150-39101040 #)87,001110340200712-0200-39100040 #)87,001116340200712-0200-39101040 #)

148,001710400250712-0250-39100040 #)148,001716400250712-0250-39101040 #)188,002410455300712-0300-39100040 #)188,002416455300712-0300-39101040 #)388,004810580400712-0400-39100040 #)388,004816580400712-0400-39101040 #)524,007710780500712-0500-39100040 #)524,007716780500712-0500-39101040 #)701,0012010840600712-0600-39100040 #)701,0012016840600712-0600-39101040 #)

Gross priceEUR


PN bar

Dmm

DN mm

AVK ref. nos.Type

Series 712/3910


Note:# GB thread (55x300)

50

39,00310/1617560712-0060-39101055 #)39,00310/1618565712-0065-39101055 #)47,00410/1620080712-0080-39101055 #)52,00510/16220100712-0100-39101055 #)61,00610/16250125712-0125-39101055 #)71,00810/16285150712-0150-39101055 #)87,001110340200712-020039100055 #)87,001116340200712-0200-39101055 #)

148,001710400250712-0250-39100055 #)148,001716400250712-0250-39101055 #)188,002410455300712-0300-39100055 #)188,002416455300712-0300-39101055 #)388,004810580400712-0400-39100055 #)388,004816580400712-0400-39101055 #)524,007710780500712-0500-39100055 #)524,007716780500712-0500-39101055 #)701,0012010840600712-060039100055 #)701,0012016840600712-0600-39101055 #)

Fittings


EN 545

21 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4010

FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 50-300

1

69,00610/1610050712-0050-4010169,00710/1610060712-0060-4010169,00710/1610065712-0065-4010161,00810/1610080712-0080-4010170,00910/16100100712-0100-40101

102,001210/16100125712-0125-40101109,001410/16100150712-0150-40101136,002110100200712-0200-40100136,002116100200712-0200-40101165,002710100250712-0250-40100165,002716100250712-0250-40101225,003710100300712-0300-40100225,003716100300712-0300-40101

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4010

FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80

2

61,00710/1610080712-0080-40103

Fittings


EN 545

22 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4110


1

69,00610/1615050712-0050-4110169,00810/1615060712-0060-4110169,00810/1615065712-0065-4110161,00810/1615080712-0080-4110170,001010/16150100712-0100-41101

102,001310/16150125712-0125-41101109,001510/16150150712-0150-41101143,002210150200712-0200-41100143,002216150200712-0200-41101172,003110150250712-0250-41100172,003116150250712-0250-41101255,004110150300712-0300-41100255,004116150300712-0300-41101

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4110


2

69,00910/16150100712-0100-41103100,001210/16150125712-0125-41103102,001410/16150150712-0150-41103143,001916150200712-0200-41103

Fittings


EN 545

23 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4210


1

72,00710/1620050712-0050-4210180,00910/1620065712-0065-4210182,00910/1620080712-0080-4210190,001110/16200100712-0100-42101

131,001510/16200125712-0125-42101148,001610/16200150712-0150-42101168,002610200200712-0200-42100168,002616200200712-0200-42101234,003310200250712-0250-42100234,003316200250712-0250-42101340,004410200300712-0300-42100340,004416200300712-0300-42101

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4210

FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 250

2

206,002916200250712-0250-42103

Fittings


EN 545

24 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4310


1

72,00810/1625050712-0050-4310196,00910/1625065712-0065-4310168,001010/1625080712-0080-4310182,001210/16250100712-0100-43101

111,001610/16250125712-0125-43101129,001810/16250150712-0150-43101160,002510250200712-0200-43100160,002516250200712-0200-43101246,003510250250712-0250-43100246,003516250250712-0250-43101279,004610250300712-0300-43100279,004616250300712-0300-43101

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4410


1

70,00810/1630050712-0050-4410176,001010/1630065712-0065-4410168,001110/1630080712-0080-4410182,001110/16300100712-0100-44101

111,001710/16300125712-0125-44101129,001910/16300150712-0150-44101160,002710300200712-0200-44100160,002716300200712-0200-44101223,003810300250712-0250-44100223,003816300250712-0250-44101279,005010300300712-0300-44100279,005016300300712-0300-44101

Fittings


EN 545

25 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4510


1

90,001110/1635080712-0080-45101106,001410/16350100712-0100-45101163,001810/16350125712-0125-45101166,002110/16350150712-0150-45101223,002810350200712-0200-45100223,002816350200712-0200-45101310,004010350250712-0250-45100310,004016350250712-0250-45101410,005310350300712-0300-45100410,005316350300712-0300-45101536,007610350350712-0350-45100616,007616350350712-0350-45101837,009410350400712-0400-45100964,009416350400712-0400-45101837,0012510350450712-0450-45100964,0012516350450712-0450-45101919,0014710350500712-0500-45100

1.057,0014716350500712-0500-451011.245,0021210350600712-0600-451001.432,0021216350600712-0600-45101

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4610


1

86,00910/1640050712-0050-4610186,001110/1640065712-0065-4610190,001310/1640080712-0080-46101

106,001410/16400100712-0100-46101149,001910/16400125712-0125-46101151,002210/16400150712-0150-46101204,003210400200712-0200-46100204,003216400200712-0200-46101281,004210400250712-0250-46100281,004216400250712-0250-46101410,005710400300712-0300-46100410,005716400300712-0300-46101568,008010400350712-0350-46100653,008016400350712-0350-46101837,0010010400400712-0400-46100963,0010016400400712-0400-46101886,0013210400450712-0450-46100

1.019,0013216400450712-0450-461011.168,0015510400500712-0500-461001.343,0015516400500712-0500-461011.316,0022310400600712-0600-461001.513,0022316400600712-0600-46101

Fittings


EN 545

26 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4810


1

86,001010/1650050712-0050-4810196,001210/1650065712-0065-4810190,001410/1650080712-0080-48101

106,001710/16500100712-0100-48101149,002210/16500125712-0125-48101151,002610/16500150712-0150-48101204,003410500200712-0200-48100204,003416500200712-0200-48101281,005010500250712-0250-48100281,005016500250712-0250-48101410,006510500300712-0300-48100410,006516500300712-0300-48101625,009010500350712-0350-48100719,009016500350712-0350-48101837,0011210500400712-0400-48100963,0011216500400712-0400-48101873,0014610500450712-0450-48100

1.004,0014616500450712-0450-481011.082,0017110500500712-0500-481001.245,0017116500500712-0500-481011.452,0024410500600712-0600-481001.669,0024416500600712-0600-48101

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4810

FFDouble flange pipeaccording to DIN545Standard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 300-400

2

410,005916500300712-0300-48103963,008516500400712-0400-48103

Fittings


EN 545

27 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4910


1

122,001110/1660050712-0050-49101125,001410/1660065712-0065-49101149,001610/1660080712-0080-49101164,001810/16600100712-0100-49101222,002510/16600125712-0125-49101230,002910/16600150712-0150-49101311,004110600200712-0200-49100311,004116600200712-0200-49101438,005510600250712-0250-49100438,005516600250712-0250-49101503,007210600300712-0300-49100503,007216600300712-0300-49101727,0010010600350712-0350-49100836,0010016600350712-0350-49101921,0012410600400712-0400-49100

1.059,0012416600400712-0400-491011.031,0016010600450712-0450-491001.186,0016016600450712-0450-491011.181,0018810600500712-0500-491001.358,0018816600500712-0500-491011.584,0026510600600712-0600-491001.822,0026516600600712-0600-49101

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/5010


1

149,001710/1670080712-0080-50101164,002010/16700100712-0100-50101222,002710/16700125712-0125-50101230,003110/16700150712-0150-50101311,004510700200712-0200-50100311,004516700200712-0200-50101438,006310700250712-0250-50100438,006316700250712-0250-50101503,007910700300712-0300-50100503,007916700300712-0300-50101876,0010910700350712-0350-50100

1.007,0010916700350712-0350-50101921,0013610700400712-0400-50100

1.059,0013616700400712-0400-501011.190,0017410700450712-0450-501001.368,0017416700450712-0450-501011.378,0020410700500712-0500-501001.585,0020416700500712-0500-501011.848,0028710700600712-0600-501002.125,0028716700600712-0600-50101

Fittings


EN 545

28 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/5110


1

149,001910/1680080712-0080-51101164,002410/16800100712-0100-51101222,003010/16800125712-0125-51101230,003710/16800150712-0150-51101311,005110800200712-0200-51100311,005116800200712-0200-51101438,006910800250712-0250-51100438,006916800250712-0250-51101503,009010800300712-0300-51100503,009016800300712-0300-51101946,0011910800350712-0350-51100

1.088,0011916800350712-0350-511011.114,0014810800400712-0400-511001.281,0014816800400712-0400-511011.391,0018810800450712-0450-511001.600,0018816800450712-0450-511011.574,0022110800500712-0500-511001.810,0022116800500712-0500-511012.112,0030810800600712-0600-511002.429,0030816800600712-0600-51101

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/5210


1

163,002110/1690080712-0080-52101180,002610/16900100712-0100-52101245,003210/16900125712-0125-52101252,004010/16900150712-0150-52101342,005610900200712-0200-52100342,005616900200712-0200-52101480,007510900250712-0250-52100480,007516900250712-0250-52101554,009810900300712-0300-52100554,009816900300712-0300-52101731,0012910900350712-0350-52100840,0012916900350712-0350-52101926,0016010900400712-0400-52100

1.065,0016016900400712-0400-521011.188,0020210900450712-0450-521001.366,0020216900450712-0450-521011.380,0023710900500712-0500-521001.588,0023716900500712-0500-521011.974,0032910900600712-0600-521002.270,0032916900600712-0600-52101

Fittings


EN 545

29 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/5310


1

163,002210/16100080712-0080-53101180,002710/161000100712-0100-53101245,003510/161000125712-0125-53101252,004210/161000150712-0150-53101342,0059101000200712-0200-53100342,0059161000200712-0200-53101480,0079101000250712-0250-53100480,0079161000250712-0250-53101554,00101101000300712-0300-53100554,00101161000300712-0300-53101961,00138101000350712-0350-53100

1.053,00138161000350712-0350-531011.033,00171101000400712-0400-531001.188,00171161000400712-0400-531011.410,00216101000450712-0450-531001.621,00216161000450712-0450-531011.533,00254101000500712-0500-531001.763,00254161000500712-0500-531012.142,00351101000600712-0600-531002.463,00351161000600712-0600-53101

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/6010

FF-WPFlanged pipe withwall sleeveStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 100-600

1

152,002110/16500100712-0100-60101208,003210/16500150712-0150-60101265,004110500200712-0200-60100265,004116500200712-0200-60101363,006310500250712-0250-60100363,006316500250712-0250-60101511,008010500300712-0300-60100511,008016500300712-0300-60101856,0014210500400712-0400-60100856,0014216500400712-0400-60101

1.356,0022110500500712-0500-601001.356,0022116500500712-0500-601011.888,0031910500600712-0600-601001.888,0031916500600712-0600-60101

Fittings


EN 545

30 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/6110

FF-WPFlanged pipe withwall sleeveStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 100-600

1

184,003110/161000100712-0100-61101287,004810/161000150712-0150-61101489,0067101000200712-0200-61100489,0067161000200712-0200-61101545,0091101000250712-0250-61100545,0091161000250712-0250-61101706,00117101000300712-0300-61100706,00117161000300712-0300-61101

1.230,00201101000400712-0400-611001.230,00201161000400712-0400-611011.798,00304101000500712-0500-611001.798,00304161000500712-0500-611012.521,00426101000600712-0600-611002.521,00426161000600712-0600-61101

Gross priceEUR


PN bar

H2mm

Lmm

DN mm

AVK ref. nos.Type

Series 712/7010

NDuckfoot bend flangedaccording to DIN EN 545Standard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 andGSK guide linesDN 80-150

1

99,001510/1611016580712-0080-70101107,001810/16125180100712-0100-70101193,003410/16160220150712-0150-70101

Fittings


EN 545

31 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

Dmm

DN mm

AVK ref. nos.Type

Series 712/7513

FFlanged spigotaccording to DIN545 series AStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-600

1

43,00510/163355640712-0040-7513154,00610/163406650712-0050-7513168,00910/163458265712-0065-7513152,001010/163509880712-0080-7513161,001210/16360118100712-0100-7513178,001710/16370144125712-0125-7513196,002110/16380170150712-0150-75131

140,002910400222200712-0200-75130140,002916400222200712-0200-75131219,004410420274250712-0250-75130219,004416420274250712-0250-75131295,005910440326300712-0300-75130295,005916440326300712-0300-75131473,008110460378350712-0350-75130544,008116460378350712-0350-75131651,0010110480429400712-0400-75130749,0010116480429400712-0400-75131

1.110,0015510520532500712-0500-751301.276,0015516520532500712-0500-751311.460,0022410560635600712-0600-751301.679,0022416560635600712-0600-75131

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0120

FFKDouble flangedbend with mobileflanges11Standard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-300

1

39,00510/1612040712-0040-0120146,00610/1612050712-0050-0120156,00710/1612065712-0065-0120160,00810/1611580712-0080-0120195,001210/16118100712-0100-01201

119,001510/16112125712-0125-01201151,002010/16115150712-0150-01201222,002810131200712-0200-01200284,003810105250712-0250-01200443,005510115300712-0300-01200

Fittings


EN 545

32 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0220

FFKDouble flangedbend 22 withmobile flangesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-300

1

39,00510/169540712-0040-0220144,00610/169550712-0050-0220156,00810/1611565712-0065-0220171,00910/1610580712-0080-0220189,001110/16110100712-0100-02201

115,001510/16106125712-0125-02201150,001910/16110150712-0150-02201217,002710130200712-0200-02200328,004310140250712-0250-02200508,006410172300712-0300-02200

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0420

FFKDouble flangedbend 45 withmobile flangesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-300

1

39,00510/1614040712-0040-0420153,00710/1614050712-0050-0420162,00810/1616065712-0065-0420192,001210/1613080712-0080-0420198,001310/16141100712-0100-04201

124,001610/16150125712-0125-04201168,002210/16160150712-0150-04201246,003410180200712-0200-04200478,006010245250712-0250-04200623,007710275300712-0300-04200

Fittings


EN 545

33 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0620

QDouble flangedbend 90with mobileflangesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-300

1

41,00510/1614040712-0040-0620155,00710/1615150712-0050-0620160,00810/1616065712-0065-0620186,001110/1616580712-0080-06201

108,001410/16182100712-0100-06201152,001910/16202125712-0125-06201208,002610/16222150712-0150-06201280,003510260200712-0200-06200536,006710350250712-0250-06200713,008810400300712-0300-06200

Gross priceEUR


PN bar

Hmm

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/1020

TAll flanged Teewith mobile flangesStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-300

1

86,00810/161402804040712-0040-10201103,001010/161503005050712-0050-10201

1310/1600060712-0061-102011210/1600060712-0062-10201

135,001310/161603206565712-0065-10201127,001310/161503205065712-0066-10201123,001210/161403204065712-0067-10201128,001610/161653308080712-0080-10201131,001510/161603306580712-0081-10201117,001410/161653305080712-0082-10201119,001410/161403304080712-0083-10201156,002010/16180360100100712-0100-10201151,001710/1617536080100712-0101-10201156,001910/1617036065100712-0102-10201140,001810/1616036050100712-0103-10201148,001710/1615036040100712-0104-10201207,002710/16200400125125712-0125-10201195,002610/16195400100125712-0126-10201187,002510/1619040080125712-0127-10201189,002410/1618540065125712-0128-10201189,002310/1617540050125712-0129-10201180,002310/1616540040125712-0130-10201265,003610/16220440150150712-0150-10201253,003510/16215440125150712-0151-10201241,003210/16210440100150712-0152-10201234,003210/1620544080150712-0153-10201238,003110/1619544065150712-0154-10201250,003110/1618544050150712-0155-10201312,002810/1619044040150712-0156-10201398,005310260520200200712-0200-10200373,004910250520150200712-0201-10200418,004710240520125200712-0202-10200349,004510240520100200712-0203-10200342,00421023552080200712-0204-10200488,00411022052065200712-0205-10200488,00411022052050200712-0206-10200476,00411021552040200712-0207-10200659,008410300600250250712-0250-10200609,007110290540200250712-0251-10200656,006310280460150250712-0252-10200546,006210275460125250712-0253-10200546,006010270460100250712-0254-10200582,00551026538080250712-0255-10200689,00491026038065250712-0256-10200927,0012110340660300300712-0300-10200926,0010510330660250300712-0301-10200832,009210320545200300712-0302-10200820,009210300545150300712-0303-10200

Fittings


EN 545

34 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Hmm

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/1020

TAll flanged Teewith mobile flangesStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 40-300

1

761,007510300450100300712-0305-10200

Gross priceEUR


PN bar

Hmm

Lmm

Ddmm

DN mm

AVK ref. nos.Type

Series 712/1031

MMA-KSSocket Tee withmobile flangebranch forUPVC pipesaccording to ENStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300

1

53,00710/161402556350712-0050-1031151,00610/161402516350712-0051-1031156,00710/161402516350712-0054-1031156,00710/161402516350712-0055-1031161,00710/161402817565712-0065-1031152,00610/161402637565712-0066-1031148,00610/161402537565712-0067-1031180,001010/161603179080712-0080-1031173,00910/161603019080712-0081-1031164,00810/161602899080712-0082-1031162,00710/161602769080712-0083-1031173,00910/161603019080712-0086-10311

110,001310/16170349110100712-0100-1031191,001110/16170328110100712-0101-1031185,001010/16170312110100712-0102-1031181,00910/16170301110100712-0103-1031177,00810/16170287110100712-0104-1031185,001010/16170312110100712-0107-10311

158,001810/16180388125125712-0125-10311146,001510/16180364125125712-0126-10311118,001210/16170343125125712-0127-10311111,001210/16170329125125712-0128-10311105,001110/16170317125125712-0129-10311100,001010/16170303125125712-0130-10311111,001210/16170329125125712-0133-10311156,001910/16200404140125712-0141-10311150,001810/16200380140125712-0142-10311119,001410/16185359140125712-0143-10311117,001310/16185344140125712-0144-10311111,001410/16170329140125712-0145-10311108,001110/16171321140125712-0146-10311117,001310/16185344140125712-0149-10311208,002510/16220451160150712-0150-10311199,002410/16220426160150712-0151-10311170,002110/16210403160150712-0152-10311146,001710/16200380160150712-0153-10311143,001710/16190366160150712-0154-10311142,001710/16170351160150712-0155-10311140,001510/16170343160150712-0156-10311143,001710/16190366160150712-0157-10311327,004010250568200200712-0200-103-10251,003110/16250520200200712-0201-10311

Fittings


EN 545

35 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Hmm

Lmm

Ddmm

DN mm

AVK ref. nos.Type

Series 712/1031

MMA-KSSocket Tee withmobile flangebranch forUPVC pipesaccording to ENStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 50-300

1

234,002910/16250495200200712-0202-10311219,002610/16230468200200712-0203-10311205,002410/16230449200200712-0204-10311192,002310/16230435200200712-0205-10311178,002210/16200420200200712-0206-10311171,002210/16200410200200712-0207-10311244,004210260586225200712-0226-10310289,003510/16260536225200712-0228-10311235,002810/16260511225200712-0230-10311231,002610/16230486225200712-0231-10311211,002810/16230466225200712-0232-10311202,002510/16230451225200712-0233-10311202,002510/16230451225200712-0238-10311513,006310319673280250712-0281-10310464,005410290622280250712-0283-10310364,004410/16230575280250712-0285-10311330,004010/16260547280250712-0287-10311294,003710/16258522280250712-0288-10311286,003410/16260502280250712-0289-10311272,003310/16260487280250712-0290-10311272,003310/16260487280250712-0295-10311683,008310310770315300712-0300-10310599,007310310720315300712-0301-10310650,007910310670315300712-0302-10310521,006410/16310620315300712-0303-10311500,006310/16300570315300712-0305-10311488,005710/16300550315300712-0306-10311

Gross priceEUR


PN bar

Lmm

Dd1mm

DN mm

AVK ref. nos.Type

Series 712/2220

FFRDouble flange reducerwith mobile flangesStandard flange drilling toISO 7005-2, EN1092-2:1997Epoxy coated according toDIN 30677-2 and GSKguide linesDN 65-300

1

54,00710/161605065712-0066-2220146,00610/161604065712-0067-2220163,00810/162006580712-0081-2220162,00710/162005080712-0082-2220158,00710/162004080712-0083-2220179,001010/1620080100712-0101-2020169,00910/1620065100712-0102-2220167,00810/1620050100712-0103-2220164,00810/1620040100712-0104-22201

102,001310/16200100125712-0126-2220196,001210/1620080125712-0127-2220185,001110/1620065125712-0128-2220185,001110/1620050125712-0129-2220178,001010/1620040125712-0130-22201

135,001610/16200125150712-0151-22201121,001410/16200100150712-0152-22201119,001310/1620080150712-0153-22201103,001310/1620065150712-0154-22201103,001210/1620050150712-0155-22201103,001110/1620040150712-0156-22201201,002310235150200712-0201-22200183,002010235125200712-0202-22200166,002010235100200712-0203-22200162,00201023580200712-0204-22200152,00201023565200712-0205-22200282,003310250200250712-0251-22200249,003110250150250712-0252-22200246,003310250125250712-0253-22200231,002810250100250712-0254-22200217,00271025080250712-0255-22200214,00271025065250712-0256-22200402,004910265250300712-0301-22200338,004310265250300712-0302-22200313,003810265200300712-0303-22200285,003410265150300712-0305-22200

Fittings


EN 545

36 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/4320

FFDouble flangepipe with mobileflangesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 40-300

1

41,00510/1625040712-0040-4320157,0081050040712-0040-4820148,00710/1625050712-0050-4320176,0091050050712-0050-4820162,00810/1625065712-0065-4320186,00111050065712-0065-4820182,001010/1625080712-0080-43201

115,00151050080712-0080-48201104,001310/16250100712-0100-43201148,001810500100712-0100-48201131,001710/16250125712-0125-43201185,002110500125712-0125-48201164,002010/16250150712-0150-43201234,002910500150712-0150-48201221,002810250200712-0200-43200320,003910500200712-0200-48200287,003810250250712-0250-43200456,005710500250712-0250-48200418,005410250300712-0300-43200582,007510500300712-0300-48200

Gross priceEUR


H2mm

Lmm

DN mm

AVK ref. nos.Type

Series 712/7020

NDuckfoot bend withmobile flangesStandard flange drillingto ISO 7005-2,EN1092-2: 1997Epoxy coated accordingto DIN 30677-2 and GSKguide linesDN 65-150

1

144,001810016565712-0065-70201114,001311016780712-0080-70201139,0020125180100712-0100-70201236,0029160220150712-0150-70201

Fittings


EN 545

37 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/7520

SS-piece withmobile flangesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 80-150

1

205,001810/1650080712-0080-75201246,002210/16500100712-0100-75201320,003910/16500150712-0150-75201

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0140

MMKDouble socketbend 11.25 withTyton socketsaccording to EN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600

1

59,007163080712-0080-0140168,0091630100712-0100-0140184,00111635125712-0125-01401

104,00141635150712-0150-01401158,00201640200712-0200-01401209,00281650250712-0250-01401301,00371655300712-0300-01401411,00481660350712-0350-01401521,00561665400712-0400-01401

1.173,00871675500712-0500-014011.834,001201685600712-0600-01401

Fittings


EN 545

38 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0240

MMKDouble socketbend 22.5 withTyton socketsaccording to EN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600

1

66,007164080712-0080-0240173,0091640100712-0100-0240190,00111650125712-0125-02401

111,00141655150712-0150-02401169,00211665200712-0200-02401227,00311675250712-0250-02401331,00401685300712-0300-02401563,00511695350712-0350-02401576,006416110400712-0400-02401

1.290,0010016130500712-0500-024012.021,0014116150600712-0600-02401

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0340

MMKDouble socketbend 30 withTyton socketsaccording to DIN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600

1

66,007164580712-0080-0340174,0091650100712-0100-0340192,00121655125712-0125-03401

114,00151665150712-0150-03401174,00221680200712-0200-03401233,00321695250712-0250-03401342,004316110300712-0300-03401584,005516125350712-0350-03401600,006916140400712-0400-03401

1.245,0010916170500712-0500-034012.077,0015616200600712-0600-03401

Fittings


EN 545

39 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0440

MMKDouble socketbend 45 withTyton socketsaccording to EN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600

1

68,007165580712-0080-0440177,0091665100712-0100-0440197,00121675125712-0125-04401

120,00161685150712-0150-04401184,002516110200712-0200-04401272,003616130250712-0250-04401367,004916150300712-0300-04401584,006516175350712-0350-04401647,008216195400712-0400-04401

1.366,0012716240500712-0500-044012.209,0018416285600712-0600-04401

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0640

MMQDouble socketbend 90 withTyton socketsaccording to EN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600

1

73,0081610080712-0080-0640187,001016120100712-0100-06401

119,001516145125712-0125-06401141,001916170150712-0150-06401224,003116220200712-0200-06401323,004616270250712-0250-06401512,006416320300712-0300-06401

1.251,0014016380350712-0350-064011.248,0012616430400712-0400-064011.897,0027016600500712-0500-064012.833,0036516640600712-0600-06401

Fittings


EN 545

40 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Hmm

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/1040

MMBTyton socketTee with socketbranchaccording to EN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-300

1

103,001316851708080712-0080-1040190,001116801705080712-0082-1040186,001116801204080712-0083-10401

115,00141695190100100712-0100-10401115,0013169517080100712-0101-10401115,0015169014550100712-0103-10401115,0014169014540100712-0104-10401163,002016110225125125712-0125-10401150,001816110195100125712-0126-10401150,00171610517080125712-0127-10401150,00191610517050125712-0129-10401150,00181610012540125712-0130-10401197,002516125255150150712-0150-10401238,002916125255125150712-0151-10401177,002116120195100150712-0152-10401177,00201612017080150712-0153-10401177,00231612017050150712-0155-10401177,00211611512540150712-0156-10401303,003816155315200200712-0200-10401274,003316150255150200712-0201-10401320,003916145255125200712-0202-10401248,002916145200100200712-0203-10401248,00271614517580200712-0204-10401248,00311614517550200712-0206-10401248,00271614013040200712-0207-10401518,005616190375250250712-0250-10401438,004316180315200250712-0251-10401400,004616175260150250712-0252-10401364,004016170200100250712-0254-10401364,00361617018080250712-0255-10401816,007616220435300300712-0300-10401816,008016210375250300712-0301-10401622,006116205320200300712-0302-10401554,005416200260150300712-0303-10401487,004816195205100300712-0305-10401462,00451619520580300712-0306-10401

Gross priceEUR


PN bar

Hmm

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/1042

MMATyton Socket Teewith flangedbranch accordingto EN 545 seriesAStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-600

1

102,001310/161651708080712-0080-10421110,001310/161601706580712-0081-10421115,001110/161601705080712-0082-10421115,001110/161551704080712-0083-10421113,001610/16180190100100712-0100-10421107,001510/1617517080100712-0101-10421115,001410/1617517065100712-0102-10421106,001310/1617017050100712-0103-10421106,001310/1617017040100712-0104-10421177,002210/16200225125125712-0125-10421146,001910/16195195100125712-0126-10421139,001810/1619017080125712-0127-10421145,001810/1617017050125712-0129-10421139,001610/1617017040125712-0130-10421185,003210/16220255150150712-0150-10421182,002910/16210195100150712-0152-10421180,002910/1620517080150712-0153-10421206,003110/1620017050150712-0155-10421180,003810/1619517040150712-0156-10421306,004210260315200200712-0200-10420306,004216260315200200712-0200-10421277,003610250255150200712-0201-10420277,003616250255150200712-0201-10421259,003010240200100200712-0203-10420259,003016240200100200712-0203-10421259,00291023517580200712-0204-10420259,00291623517580200712-0204-10421259,00271026520050200712-0206-10420259,00271626520050200712-0206-10421259,00271023017540200712-0207-10420259,00271623017540200712-0207-10421468,006110300375250250712-0250-10420468,006116300375250250712-0250-10421401,004310290315200250712-0251-10420401,004316290315200250712-0251-10421364,004610280260150250712-0252-10420364,004616280260150250712-0252-10421

Fittings


EN 545

41 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Hmm

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/1042

MMATyton Socket Teewith flangedbranch accordingto EN 545 seriesAStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-600

1

330,004010270200100250712-0254-10420330,004016270200100250712-0254-10421329,00381026518080250712-0255-10420329,00381626518080250712-0255-10421614,008310340435300300712-0300-10420614,008316340435300300712-0300-10421596,007510330430250300712-0301-10420596,007516330430250300712-0301-10421439,006510320320200300712-0302-10420439,006516320320200300712-0302-10421440,005710310260150300712-0303-10420440,005716310260150300712-0303-10421435,005010300205100300712-0305-10420435,005016300205100300712-0305-10421435,00471029518080300712-0306-10420435,00471629518080300712-0306-10421899,0011010380495350350712-0350-10420899,0011016380495350350712-0350-10421629,007710350325200350712-0353-10420629,007716350325200350712-0353-10421895,005910330205100350712-0356-10420895,005916330205100350712-0356-10421

1.089,0014110420560400400712-0400-104201.089,0014116420560400400712-0400-104211.009,0011410400440300400712-0402-104201.009,0011416400440300400712-0402-10421

861,0010510390440250400712-0403-10420861,0010516390440250400712-0403-10421927,009110380325200400712-0404-10420927,009116380325200400712-0404-10421793,007010370270150400712-0405-10420793,007016370270150400712-0405-10421783,007610360210100400712-0407-10420783,007616360210100400712-0407-10421781,00611035518580400712-0408-10420781,00611635518580400712-0408-10421

3.225,0022710500680500500712-0500-104203.225,0022716500680500500712-0500-104212.277,0018910480565400500712-0502-104202.277,0018916480565400500712-0502-104212.211,0015610460450300500712-0504-104202.211,0015616460450300500712-0504-104211.816,0012810440330200500712-0506-104201.816,0012816440330200500712-0506-104211.794,0012610430330150500712-0507-104201.794,0012616430330150500712-0507-104211.708,0010410420215100500712-0509-104201.708,0010416420215100500712-0509-10421

853,001041042021580500712-0510-10420853,001041642021580500712-0510-10421

4.770,0033616580800600600712-0600-104204.770,0033610580800600600712-0600-104214.510,0031716560800500600712-0601-104204.510,0031710560800500600712-0601-104213.398,0023916540570400600712-0603-104203.398,0023910540570400600712-0603-104213.266,0023016520570300600712-0605-104203.266,0023010520570300600712-0605-104213.185,0022410510570250600712-0606-104203.185,0022410510570250600712-0606-104212.395,0016910500340200600712-0607-104202.395,0016916500340200600712-0607-104212.357,0016610490340150600712-0608-104202.357,0016616490340150600712-0608-104212.230,0016410480340100600712-0610-104202.230,0016416480340100600712-0610-104212.315,001631047534080600712-0611-104202.315,001631647534080600712-0611-10421

Fittings


EN 545

42 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/2040

MMRDouble socketreducer withTyton socketaccording to EN545 series AStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 100-600

1

71,008169080100712-0101-2040181,001016100100125712-0126-2040181,00101614080125712-0127-20401

130,001316100125150712-0151-20401126,001216150100150712-0152-20401175,00121619080150712-0153-20401182,001916150150200712-0201-20401175,001916200125200712-0202-20401175,001816250100200712-0203-20401242,002616150200250712-0251-20401233,002716250150250712-0252-20401298,003616300125250712-0253-20401284,003516150250300712-0301-20401293,003616250200300712-0302-20401294,003616350150300712-0303-20401370,004516160300350712-0351-20401384,004716260250350712-0352-20401392,004816360200350712-0353-20401455,005616160350400712-0401-20401476,005816260300400712-0402-20401498,006116360250400712-0403-20401984,0012016260400500712-0502-20401723,008816360350500712-0503-20401

1.230,0011516260500600712-0601-204011.050,0012816460400600712-0603-20401

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/3240

TY-CFemale end cap withTyton socketStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-300

1

28,003164080712-0080-3240141,0051640100712-0100-3240149,0061645125712-0125-3240166,0081645150712-0150-32401

115,00141650200712-0200-32401183,00211655250712-0250-32401246,00301660300712-0300-32401

Fittings


EN 545

43 2007-07-10 11:28 CET

Gross priceEUR


PN bar

W1mm

H3mm

H2mm

DN mm

AVK ref. nos.Type

Series 712/7014

ENDuckfoot bendflanged with TytonsocketStandard flangedrilling to ISO7005-2, EN1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 80-100

1

93,001510/1616525511080712-0080-70141108,001710/16180283125100712-0100-70141

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/7514

EUFlanged socket with Tyton socket accordingto EN 545 series AStandard flange drilling to ISO 7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 80-600

1

54,00810/1613080712-0080-7514163,001010/16130100712-0100-7514183,001410/16135125712-0125-7514198,001610/16135150712-0150-75141

138,002510140200712-0200-75140138,002516140200712-0200-75141195,003210145250712-0250-75140195,003216145250712-0250-75141276,003910150300712-0300-75140276,003916150300712-0300-75141439,004710155350712-0350-75140439,004716155350712-0350-75141551,006010160400712-0400-75140551,006016160400712-0400-75141826,008410170500712-0500-75140826,008416170500712-0500-75141

1.201,0011210180600712-0600-751401.201,0011216180600712-0600-75141

Fittings


EN 545

44 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/7540

UDouble sockedcollar with TytonsocketsStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600

1

98,0091616080712-0080-75401119,001116160100712-0100-75401149,001416165125712-0125-75401173,001816165150712-0150-75401245,002616170200712-0200-75401341,003516175250712-0250-75401465,004816180300712-0300-75401651,005516185350712-0350-75401782,006216190400712-0400-75401

1.175,00016200500712-0500-754011.806,00016210600712-0600-75401

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/7519

EUFlangedMecanical JointSocket for DIpipesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600

1

86,001010/1612560712-0060-75191107,001310/1613080712-0080-75191131,001510/16130100712-0100-75191156,001910/16135125712-0125-75191189,002410/16135150712-0150-75191246,003416140200712-0200-75191336,004416145250712-0250-75191443,005416150300712-0300-75191637,007416155350712-0350-75191732,007416160400712-0400-75191

1.179,0013716170500712-0500-751911.636,0019016180600712-0600-75191

Fittings


EN 545

45 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN1 L1mm

DN mm

AVK ref. nos.Type

Series 712/7563

EUFlanged couplingnon tensileMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600

1

115,001410/162858580712-0080-75631135,001710/1629590100712-0100-75631168,002110/1631090125712-0125-75631217,002710/1632595150712-0150-75631312,003816370100200712-0200-75631435,005316395105250712-0250-75631549,006716425110300712-0300-75631763,009316445110350712-0350-75631943,0011516450110400712-0400-75631

1.410,0017216490120500712-0500-756311.935,0023616500120600712-0600-75631

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0160

MMKDouble socketbend 11.25Mecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600

1

103,0012162560712-00600-1601139,0017163080712-00800-1601164,00201630100712-01000-1601197,00241635125712-01250-1601246,00301635150712-01500-1601312,00381640200712-02000-1601418,00511650250712-02500-1601566,00691655300712-03000-1601771,00941660350712-03500-1601935,001141665400712-04000-1601

1.353,001651675500712-05000-16011.837,002241685600712-06000-1601

Fittings


EN 545

46 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0260

MMKDouble socketbend 22½Mecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600

1

103,0013163560712-00600-2601139,0017164580712-00800-2601164,00201650100712-01000-2601205,00251650125712-01250-2601254,00341655150712-01500-2601328,00431665200712-02000-2601443,00581675250712-02500-2601590,00731685300712-03000-2601812,00991695350712-03500-2601

1.000,0012216110400712-04000-26011.460,0017816130500712-05000-26012.001,0024416150600712-06000-2601

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0460

MMKDouble socketbend 45Mecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600

1

107,0013164560712-00600-4601148,0017165580712-00800-4601172,00201665100712-01000-4601213,00261675125712-01250-4601271,00341685150712-01500-4601361,004816110200712-02000-4601484,006616130250712-02500-4601664,008116150300712-03000-4601918,0011216175350712-03500-4601

1.132,0013816195400712-04000-46011.697,0020716240500712-05000-46012.378,0029016285600712-06000-4601

Fittings


EN 545

47 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/0660

MMQDouble socketbend 90Mecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600

1

116,0014168060712-00600-6601156,00181610080712-00800-6601180,002216120100712-01000-6601230,002816145125712-01250-6601295,003816170150712-01500-6601402,005616220200712-02000-6601566,007516270250712-02500-6601787,009616320300712-03000-6601

1.017,0012416370350712-03500-66011.378,0016816420400712-04000-66012.107,0025716520500712-05000-66013.034,0037016620600712-06000-6601

Gross priceEUR


PN bar

Hmm

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/1060

MMBSocket TeeMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-250

1

164,0020161451566060712-0060-10601238,0026161701708080712-0080-10601279,003116190185100100712-0100-10601262,00281617018080100712-0101-10601336,004116225202125125712-0125-10601320,003916195200100125712-0126-10601303,00371617019080125712-0127-10601435,005016255220150150712-0150-10601377,004416195210100150712-0152-10601353,00431617020580150712-0153-10601574,007316315257200200712-0200-10601517,006616255245150200712-0201-10601451,005516200235100200712-0203-10601435,00531617523080200712-0204-10601822,0010016375297250250712-0250-10601786,009616315210200250712-0251-10601744,007616260270150250712-0252-10601723,006816200260100250712-0254-10601

Fittings


EN 545

48 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

Hmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/1061

MMASocket Tee withflanged branchMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600

1

197,002210/161701658080712-0080-10611185,002110/161451606080712-0081-10611172,002110/161201554080712-0083-10611238,002710/16190180100100712-0100-10611230,002610/1617017580100712-0101-10611217,002310/1614517060100712-0102-10611197,002410/1612017040100712-0104-10611295,003710/16225200125125712-0125-10611279,003410/16195195100125712-0126-10611271,003210/1617019080125712-0127-10611377,004710/16255220150150712-0150-10611361,004410/16225215125150712-0151-10611344,004010/16195210100150712-0152-10611328,003910/1617020580150712-0153-10611303,003610/1615520060150712-0154-10611517,006916315260200200712-0200-10611467,005916255250150200712-0201-10611426,005316200240100200712-0203-10611402,00491617523580200712-0204-10611377,00481615023060200712-0205-10611722,008816375300250250712-0250-10611648,007916315290200250712-0251-10611590,007416275280150250712-0252-10611541,006516200270100250712-0254-10611517,00631618026580250712-0255-10611984,0012016435340300300712-0300-10611910,0011116380330250300712-0301-10611828,009716320320200300712-0302-10611763,008716260310150300712-0303-10611705,007916205300100300712-0305-10611681,00751618029580300712-0306-10611

1.402,0017116495380350350712-0350-106111.066,0013016325350200350712-0353-10611

894,0010916205330100350712-0356-106111.771,0021616560420400400712-0400-106111.656,0020216560400300400712-0402-106111.254,0015316325380200400712-0404-106111.230,0015016270370150400712-0405-106111.066,0013016210360100400712-0407-106112.796,0034116680500500500712-0500-106112.378,0029016565480400500712-0502-106112.255,0027516565480300500712-0504-106111.763,0021516330440200500712-0506-106111.730,0021116330440150500712-0507-106111.533,0018716215420100500712-0509-106114.034,0049216800580600600712-0600-106113.854,0047016800580500600712-0601-106113.034,0037016570540400600712-0603-106112.919,0035616570540300600712-0605-106112.320,0028316340500200600712-0607-106112.279,0027816340500150600712-0608-10611

Fittings


EN 545

49 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN2mm

DN mm

AVK ref. nos.Type

Series 712/2960

MMRDouble socketreducerMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-600

1

123,001516906080712-0086-29601156,0018169080100712-0101-29601189,002316100100125712-0126-29601180,00221614080125712-0127-29601230,002816100125150712-0151-29601221,002716150100150712-0152-29601213,00261619080150712-0153-29601303,003716150150200712-0201-29601287,003516200125200712-0202-29601279,003616250100200712-0203-29601348,003716150200250712-0251-29601385,004716250150250712-0252-29601369,004516300125250712-0253-29601517,006416150250300712-0301-29601508,006216250200300712-0302-29601500,006116350150300712-0303-29601689,008416160300350712-0349-29601672,008216260250350712-0352-29601664,008116360200350712-0353-29601869,0010616160350400712-0401-29601836,0010216260300400712-0402-29601820,0010016360250400712-0403-29601

1.238,0015116260400500712-0502-296011.246,0015216360350500712-0503-29601

894,0010916260500600712-0601-296011.706,0020816460400600712-0603-29601

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/3060

EXFemale End CapMecanical Joint forDI pipesStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 60-600

1

53,007164060712-0060-3060174,009164080712-0080-3060190,00111640100712-0100-30601

107,00131645125712-0125-30601148,00181645150712-0150-30601197,00241650200712-0200-30601287,00351655250712-0250-30601394,00481660300712-0-300-30601533,00651670350712-0350-30601681,00831670400712-0400-30601

1.041,0012716100500712-0500-306011.517,0018516110600712-0600-30601

Fittings


EN 545

50 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

Dmm

DN mm

AVK ref. nos.Type

Series 712/3141

EXEnd CapMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600

1

25,003161807760712-0060-3141133,004162009880712-0080-3141141,00516200118100712-0100-3141157,00716225144125712-0125-3141174,00916225170150712-0150-31411

131,001616250222200712-0200-31411189,002316250274250712-0250-31411271,003316275326300712-0300-31411394,004816275378350712-0350-31411492,006016275429400712-0400-31411754,009216275532500712-0500-31411

1.164,0014216300635600712-0600-31411

Gross priceEUR


PN bar

H2mm

Lmm

DN mm

AVK ref. nos.Type

Series 712/7060

ENDuckfoot SocketBendMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2, EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 60-600

1

135,0017168010060712-0060-70601189,00231610011080712-0080-70601230,002816120125100712-0100-70601295,003616145140125712-0125-70601385,004716170160150712-0150-70601541,006616220190200712-0200-70601771,009416270225250712-0250-70601

1.082,0013216320255300712-0300-706011.419,0017316370290350712-0350-706011.911,0023316420320400712-0400-706012.968,0036216520385500712-0500-706014.362,0053216620450600712-0600-70601

Fittings


EN 545

51 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 712/7560

UDouble socketMecanical Joint forDI pipesStandard flangedrilling to ISO7005-2, EN 1092-2:1997Epoxy coatedaccording to DIN30677-2 and GSKguide linesDN 60-600

1

123,00151615560712-0060-75601164,00201616080712-0080-75601180,002216160100712-0100-75601213,002616165125712-0125-75601271,003316165150712-0150-75601344,004216170200712-0200-75601451,005516175250712-0250-75601590,007216185300712-0300-75601779,009516185350712-0350-75601968,0011816190400712-0400-75601

1.320,0016116200500712-0500-756011.804,0022016210600712-0600-75601

Gross priceEUR


PN bar

DN1 L1mm

Lmm

DN mm

AVK ref. nos.Type

Series 712/7564

EUDouble Flangedcouplingnon tensileMecanical Jointfor DI pipesStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coatedaccording to DIN30677-2 andGSK guide linesDN 80-300

1

176,002210/161659580712-0080-75641209,002610/1619095100712-0100-75641336,004110/16245105150712-0150-75641496,006116300140200712-0200-75641697,008516355155250712-0250-75641

1.033,0012616410170300712-0300-75641

Fittings


EN 545

52 2007-07-10 11:28 CET

Gross priceEUR


PN bar

Lmm

DN mm

AVK ref. nos.Type

Series 78/82

Concrete Wallsleve withpuddle flangeStandard flangedrilling to ISO7005-2,EN1092-2: 1997Epoxy coated according to DIN 30677-2 andGSK guide linesDN 50-400

001

405,001610/164955078-050-8210001405,002110/165106078-060-8210001479,002810/165208078-080-8210001588,003410/1653010078-100-8210001741,004410/1655512578-125-8210001871,005310/1657015078-150-8210001958,00731660020078-200-8210001

1.350,001041663025078-250-82100011.873,001361666530078-300-82100012.614,001751675435078-350-82100013.136,002111680540078-400-8210001

Others


EN 545

53 2007-07-10 11:28 CET

The AVK Group (Valves & Fittings Division)

Denmark

AVK Holding A/S

Søndergade33

DK-8464Galten

Denmark

Tel: +4586943888

Fax: +4586944833

AVK INTERNATIONAL A/S

Bizonvej1,Skovby

DK-8464Galten

Denmark

Tel: +4587542100

Fax: +4587542120

e-mail:[email protected]


www.avkvalves.com

AVK Tooling A/S

Granlyvej2,

P.O.Box49

DK-9300Sæby

Denmark

Tel: +4598461711

Fax: +4598467061


Flonidan DC A/S

Islandsvej29

DK-8700Horsens

Denmark

Tel: +4575618888

Fax: +4575626088


www.flonidan.dk

Q-TRANSPORTMATERIEL A/S Hjaltevej16,Skovby

DK-8464Galten

Denmark

Tel: +4586943277

Fax: +4586946532


www.q-system.dk

AVK GUMMI A/S Mosegårdsvej1

DK-8670Låsby

Denmark

Tel: +4586951311

Fax: +4586951085


www.avkgummi.dk

J.C. Hansens Metalvarefabrik ApS Karetmagervej21

DK-7100Vejle

Denmark

Tel: +4575858408

Fax: +4575858082


www.jchansen.dk

Rest of Europe

AVK Mittelmann Armaturen GmbH

Schillerstraße50

D-42489Wülfrath

Germany

Tel.: +492058-901-01

Fax: +492058-901-110


AVK Norge AS

Hågasletta7

N-3236Sandefjord

Norway

Tel: +4733482999

Fax: +4733482982


www.avk.no

Rep. Office, Finland Pakkalankuja7

01510Vantaa

Finland

Tel.: +358-9-47308410

Fax: +358-9-47308999

AVK Polska Sp. z o.o.ul.Jakubowska1

PL-62-045Pniewy

Poland

Tel: +48612910000

Fax: +48612911000


AVK Armadan Sp. z o.o.ul.Jakubowska1

PL-62-045Pniewy

Poland

Tel: +48612912001

Fax: +48612912033


Rep. Office, Romania

P-taAlbaIulianr.6bl.I5,

sc.Cap.71sect.3

Bucharest

Romania

Tel: +40213265017

Fax: +40213265018


AVK Plastics BV Gaaikemastraat62

P.O.Box49

NL-8560AABalk

TheNetherlands

Tel: +31514604604

Fax: +31514602882


AVK Nederland BV Radeweg12,P.O.Box73

NL-8170ABVaassen

TheNetherlands

Tel: +31578574490

Fax: +31578574459


Wouter Witzel Eurovalves BV IndustrieterreinDePol12

7581CZLosser

P.O.Box54

NL-7580ABLosser

TheNetherlands

Tel: +31(0)535369536

Fax: +31(0)535369500


AVK Rewag BV Schorsweg1

NL-8171MEVaassen

TheNetherlands

Tel: +31578560602

Fax: +31578560601


AVK Belgium NV Zoomstraat6A

B-9160Lokeren

Belgium

Tel: +3293481313

Fax: +3293493964


AVK FRANCE S.A.

33,RueAndréBoulle

CS2904

F-41029BloisCedex

France

Tel: +33254742313

Fax: +33254742827

e-mail:[email protected] AVK Haut Marnaise S.A.

5,RueMauclère

B.P.24

F-52301JoinvilleCedex

France

Tel: +33325944800

Fax: +33325941732


AVK Válvulas, S.A. PolígonoIndustrialFrancolí

Parcela27

E-43006Tarragona

Spain

Tel: +34977543008

Fax: +34977541622


Aqua-Gas Manufacturing Ltd. ArnsleyRoad

Weldon,Corby

UK-Northants

NN175QW

UnitedKingdom

Tel: +441536275910

Fax: +441536204256


Aqua-Gas AVK Ltd. P.O.Box143,

Rushmills

UK-Northampton

NN47ZU

UnitedKingdom

Tel: +441604601188

Fax: +441604604818


Glenfield Valves Ltd.

QueensDrive

Kilmarnock,Ayrshire

Scotland

KA13XF

Tel: +441563521150

Fax: +441563545616


AVK Manufacturing Ltd. P.O.Box46,RuscoeWorks,

DunkirkLane,Hyde

UK-Cheshire

SK144PN

UnitedKingdom

Tel: +441613667777

Fax:+441613685719


Bryan Donkin Valves Ltd. DerbyRoad

UK-Chesterfield

S402EB

UnitedKingdom

Tel: +441246500029

Fax:+441246297455


www.donkinvalves.com

Donkin

DerbyRoad

UK-Chesterfield

S402EB

UnitedKingdom

Tel: +441246558707

Fax: +441246558712


www.donkinvalves.com

Africa

AVK Valves Southern Africa (Pty) Ltd. P.O.Box1025

ZA-Hartenbos6520

SouthAfrica

Tel: +27446951626

Fax: +27446951310


Middle East

Saudi Valves Manufacturing Co. Ltd. JeddahIndustrialCity

Phase4,Streetno.LO404

P.O.Box10830

KSA-21443Jeddah

KingdomofSaudiArabia

Tel: +96626371570

Fax: +96626379380


AVK Middle East Suite203,BlockB

oftheArencoBuilding

inKarama,Dubai,UAE

Tel: +97143366396

Fax: +97143369908


America

American AVK Co. 2155MeridianBlvd.

Minden,NV89423 USA

Tel: +17755521400

Fax: +17757837502

[email protected]

www.americanavk.com

American AVK Co.7241PeppermillParkway

NorthCharleston,SC29418

USA

Tel: +18435525557

Fax: +18435528852


AVK Overseas, Latin America & the Caribbean

7636N.Ingram,Suite104

Fresno,CA-93711

USA

Tel: +15594510435

Fax: +15594510437

e-mail:

[email protected]

AVK Overseas Rep. Office, Grenada MorneJaloux,

St.George’s

Grenada

Tel: +473-435-1019

Fax: +473-435-1018


Australia AVK Australia Pty Ltd 559AGrandJunctionRoad

AUS-Wingfield,S.A.5013

Australia

Tel: +61883680900

Fax: +61883680970


www.avkvalves.com.au

Asia

AVK Overseas (Asia) AVKValvesManufacturing

MalaysiaSdnBnd

LotNo.1,JalanSg.Chadong8

Batu51/2Mile,JalanKapar

MY-42100Klang

SelangorDarulEhsan

Malaysia

Tel: +60332918270

Fax: +60332914257

e-mail:

[email protected]

AVK Overseas (Asia) AVK Vietnam 6thFloor,14NguyenVanNgoc

BaDinhDistrict

Hanoi

Vietnam

Tel: +8447666929

Fax: +8447666928


www.avkvalves.com

AVK Valves Company Hong Kong Ltd. UnitsC&D

10thFloor,Centre600

82KingLamStreet

CheungShaWan,Kowloon

HongKong

Tel: +85227730846

Fax: +85227731164


AVK Valves (Shanghai) Co., Ltd.UnitA,7/F,

EastTower,Hi-TechKingWorld

668BeijingEastRoad,

HuangpuDistrict

Shanghai,People’sRepublicofChina

PostCode:200001

Tel: +862153087733

Fax: +862153089989


AVK Valves (Anhui) Co., Ltd. No.20HengjiangStreet

Hexian

ChaohuCity238200

AnhuiProvince

People’sRepublicofChina

Tel: +865655351327

Fax: +865655351379


AVK Philippines Inc. (formerlyAqua-GasValves&

FittingsCorp.)

#100E.RodriguezJr.Avenue

cornerDonaJuliaVargasAvenue,

Brgy.Ugong,1604PasigCity,

ThePhilippines

Tel: +6329106205/6206

+6326716698/6585/6581

Fax:: +6329106207


The AVK Group (Valves & Fittings Division)

T h e A V K G r o u p

A V K G l o b a l p r o d u c t o f f e r i n g

G e o g r a p h i c a l re g i o n s c o v e re d b y t h e AV K G ro u p

1/1-

2007

ContinentalEurope,Russia,NorthernandCentralAfrica,SouthEasternEurope-AVK International A/S

AVKSalesCompanies:AVK Norge AS AVK Mittelmann Armaturen GmbH AVK Nederland BV AVK Belgium NV AVK Armadan Sp. z o.o. AVK FRANCE S.A. AVK Válvulas, S.A. UKandIreland-Aqua-Gas AVK Ltd.

NorthAmerica-American AVK Company

AustralAsia-AVK Australia pty Ltd

TheArabianPeninsula-Saudi Valves Manufacturing Co. Ltd.

LatinAmericaandtheCaribbean-AVK overseas

Asia-AVK overseas

ChinaandHongKong-AVK China

SouthernAfrica-AVK Valves Southern Africa (pty) Ltd.

Documents

AVK Valves