8
T THE EVOLUTION OF SCREED Automatic self-propelled mixers for traditional sand-cement screeds SERIES

Automatic self-propelled mixers for traditional sand ......Deutz Engine TCD 3.6 L4 Compressor Screw 6.100 lt @ 10 bar Screw 6.100 lt @ 10 bar Screw 6.100 lt @ 10 bar Screw 6.100 lt

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

  • T

    T H E E V OL U T I O N

    O F S C R EE D

    Automatic self-propelled mixers for traditional sand-cement screeds

    S E R I E S

  • TMSA 9.4 T PTOMSA 13.4 T MSA 15.5 T PTOMSA 17.5 T PTOMSA 20.6 T RMSA 24.7 T R

    2

    Operator works from the ground.

    Compact vehicle, enters into narrow places.

    Motor-powered and radio-controlled covering.

    Stainless steel operator panel.

    Liftable mixer. Great clearance of the vehicle for manoeuvring on the road.

    Radio remote controlled hose reel.

    High pressure cleaner. Horizontal equipment with extraction by belt (sand) and screw (cement).

    Fully hydraulic.

    Bidirectional radio remote controlwith display.

    Dosing of the materials through weight and flow sensors.

    S E R I E S

    Lightweight subfloors

    Traditional screed

    Self-levelling screed

  • 3

    The OVERMAT system for traditional screed of T SERIES is the

    best work companion for the modern screed company.

    Compact, with an extremely low barycentre thanks to the lift-

    able mixer vessel, which remains protected while travelling,

    it allows to realize all the products that are requested by the

    customers.

    Being it an horizontal system, without tipper, it realizes your

    recipes with the maximum versatility.

    A powerful software allows you to accurately monitor the

    dosages, from inert materials with different grain sizes, to

    binders and additives (both liquid and gel) or additional

    fibres.

    The entire process is saved in the computer memory and

    can be exported either on a USB stick or via Internet.

    It is also available in the version for dry premixed screed.

    TRADIT IONAL SCREED AND OTHER SEMI-DRY CONSISTENCY MATERIALS

  • 4

    3600 1350 1930

    33003600

    8350

    15°

    4250 1380 2000

    15°

    35003800

    9060

    1805 3670 1310 13109910

    1815

    12460

    38603520

    26°

    34903790

    15°

    1600 5200 150012200

    1500 2400

    15200

    MSA 9.4 T PTO

    MSA 20.6 T R MSA 24.7 T R

    MSA 15.5 T PTO

    M O D E L O F T H E “ T S E R I E S ”

  • 5

    (*¹) According to the material and recipe used.(*2) Tares, weights and dimensions can change depending on the configuration.

    THE MSA 15.5 T PTO E MSA 20.6 T R MODELS ARE AVAILABLE ALSO IN THE VERSION FOR THE PRODUCTION OF „PREMIXED“ TRADITIONAL SCREED

    MSA 9.4 T PTO 13.4 T 15.5 T PTO 17.5 T PTO 20.6 T R 24.7 T R

    Sand volume 9 m3 13 m3 15 m3 17 m3 20 m3 24 m3

    Cement volume 4 m3 4 m3 5 m3 5 m3 6 m3 7 m3

    Mixer vessel 270 lt 270 lt 270 lt 270 lt 270 lt 270 lt

    Production *1 up to 6 m³/h up to 6 m³/h up to 6 m³/h up to 6 m³/h up to 6 m³/h up to 6 m³/h

    Pumping height *1 100 m 100 m 100 m 100 m 100 m 100 m

    Pumping distance *1 150 m 150 m 150 m 150 m 150 m 150 m

    Vehicle 3 axles truck 4 axles truck 4 axles truck 5 axles truck 3 axles trailer3 axles trailer, TRIDEC steering

    Driving P.T.O. of the vehicleDeutz Engine

    TCD 3.6 L4 P.T.O. of the vehicle P.T.O. of the vehicleDeutz Engine

    TCD 3.6 L4Deutz Engine

    TCD 3.6 L4

    Compressor Screw

    6.100 lt @ 10 barScrew

    6.100 lt @ 10 barScrew

    6.100 lt @ 10 barScrew

    6.100 lt @ 10 barScrew

    6.100 lt @ 10 barScrew

    6.100 lt @ 10 bar

    Tare *25,5 ton

    Vehicle excluded6,5 ton

    Vehicle excluded6,0 ton

    Vehicle excluded6,5 ton

    Vehicle excluded11,5 ton 12,5 ton

    Pre-mixerOptional

    more than 6 m3/hOptional

    more than 6 m3/hOptional

    more than 6 m3/hOptional

    more than 6 m3/hOptional

    more than 6 m3/hOptional

    more than 6 m3/h

  • 6

    AVAILABLE OPTIONS

    Automatic greasing

    Loose/roll fibres dispenser Powder additive dispenser

    Aluminium side doors Lightweight inert materials dispenser Level sensor on the binder compartment with alarm siren

    Flow sensor for liquid additives dosing Gel/paste dispenser

    Pneumatic refilling system for cement compartment

  • 7

    Stainless steel washing water recovering tank

    Mobile adjustable bulkhead for the sand compartment

    “Polar” version Pre-mixer on load cells

    Videocamera for reverse driving Motorized reel for water pipes

    Additional water tank Electrical generator GPS tracking, internet data transmission, on-line real-time assistance

  • Via Campardone, 7 - 31014 Colle Umberto (TV) - Italiatel +39 0438 434443 - Fax +39 0438 [email protected] - www.overmat.it

    www.ormet.it

    2017

    Orm

    et Sr

    l - A

    ll righ

    ts re

    serv

    ed ·

    Spec

    ifica

    tions

    subje

    ct to

    chan

    ge w

    ithou

    t not

    ice ·

    Print

    ed in

    Italy