• View
216

0

Embed Size (px)

DESCRIPTION

Self tutoring to learn Auto Cad at the pace you like, whenever you like.

• 2WORKING WITH LINE AND RAY........................................ 5

How to draw the single line in the AutoCAD ....................................................5How to show the line properties window..........................................................7How to draw the Ray...........................................................................................9How to show the Ray properties .....................................................................11How to draw the Construction Line.................................................................12How to show the Construction Line properties .............................................14How to draw the Multiline.................................................................................16How to show the Multiline properties window ...............................................18

WORKING WITH POLYGON ............................................. 19

How to draw the Polyline .................................................................................19How to show the Polyline properties window ................................................21How to draw 3D Polyline ..................................................................................23How to show the 3D Polyline properties window ..........................................25How to draw the Polygon .................................................................................27How to show the Polygon properties..............................................................29How to draw the Rectangle ..............................................................................31How to show the rectangle properties window..............................................33

WORKING WITH ARC, CIRCLE, DONUT AND SPLINE .. 34

How to draw the Arc with 3 Points ..................................................................34How to draw Arc with Start, Center, End ........................................................35How to draw the Arc with Start, Center, Angle...............................................37How to draw the Arc with Start, End, Angle ...................................................38How to draw the Arc with the Start, End, Direction .......................................40How to draw Arc with Center, Start, End ........................................................42How to draw Arc with Center, Start, Angle .....................................................44How to show the Arc properties window........................................................46

• 3How to draw the Circle with Center, Radius...................................................48How to draw the circle with Center, Diameter ................................................49How to draw the circle with 2 Points...............................................................50How to draw the circle 3 Points.......................................................................51How to show the circle properties window ....................................................52How to draw the Donut.....................................................................................53How to show the Donut properties window ...................................................55How to draw the Spline ....................................................................................56How to show the Spline properties window ...................................................58

WORKING WITH ELLIPSE AND POINT ........................... 59

How to draw the Ellipse with Center point .....................................................59How to draw the Ellipse with the Axis, End....................................................60How to draw the Ellipse with the Arc ..............................................................61How to show the Ellipse properties window ..................................................62How to draw single point .................................................................................63How to draw the multipoint..............................................................................64

WORKING WITH TEXT AND SURFACES ........................ 65

How to draw the Multiline Text ........................................................................65How to draw the Single Line Text....................................................................67How to draw the 2D Solid.................................................................................68How to draw the 3D Face .................................................................................69How to draw the 3D Surfaces ..........................................................................71

WORKING WITH DIMENSION........................................... 73

How to draw the Linear ....................................................................................73How to draw the Aligned ..................................................................................75How to draw the Ordinate ................................................................................77

• 4How to draw the Radius ...................................................................................79How to draw the Diameter................................................................................81How to draw the Angular..................................................................................83How to draw the Baseline ................................................................................85How to draw the Continue................................................................................87How to draw the center mark...........................................................................89

WORKING WITH MODIFY ................................................. 91

How to change the line color ...........................................................................91How to work with Erase command..................................................................93How to work with Copy command...................................................................94How to work with Mirror command .................................................................96How to move the object....................................................................................98How to rotate the object ...................................................................................99How to work with Scale ..................................................................................100How to work with Stretch ...............................................................................101How to work with Break .................................................................................102How to work with Chamfer.............................................................................103How to work with Fillet ...................................................................................104How to work with Hatch .................................................................................105How to modify the Polyline ............................................................................107How to modify the Spline ...............................................................................108

• 5Working with Line and Ray

How to draw the single line in theAutoCADTo draw the single line in the AutoCAD Step 1To draw the single line in the AutoCAD, first, you need to use the mouse to opens the Draw menu and thenclick the Line command.

Step 2Place the insertion point to where you want to draw the single line.

Step 3After that, you need to use the mouse to specify the start point and drag and draw the line with your desiredlength. Later, click at the end point. If you want to continue drawing, you need to go to step 1 and if youwould like to finish the drawing, go to the next step.Finally, press the Enter key.

• 6

• 7How to show the line propertieswindowTo show the line properties window Step 1If you wish to show the line properties window, first, you need to use the mouse to select the line that youwant to show its properties window.

Step 2After that, use the mouse to open the Modify menu and then click the Properties command.

Step 3Finally, youll able to see that the line properties window appears on the screen.

• 8

• 9How to draw the RayTo draw the Ray Step 1To draw the Ray, first, you must use the mouse to open the Draw menu and then click the Ray command.

Step 2Next, place the insertion point to where you want to draw the Ray.

Step 3Later, you need to use the mouse to specify the start and the through point.If you want to continue the drawing, just go to step 2 and if you want to finish the drawing go to the nextstep. Finally, just press Esc key.

• 10

• 11

How to show the Ray propertiesTo show the Ray properties Step 1To show the ray properties, first, you need to use the mouse to select the Ray that you want to show itsproperties window.

Step 2After that, you need to use the mouse to open the Modify menu and then click the Properties command.

Step 3Finally, youll able to see that the Ray properties window appears on the screen.

• 12

How to draw the Construction LineTo draw the Construction Line Step 1To draw the Construction line, first, you need to use the mouse to open the Draw menu and then click theConstruction Line.

Step 2Place the insertion point to where you want it to be inserted.

Step 3After that, just use the mouse to specify the start point and then you need to specify the through point. Ifyou want to continue the drawing, just go to step 2 and if

Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents
Documents