5
www.dr-escherich.com Aufwickeln, Abwickeln und Umwickeln Winding, Unwinding and Rewinding APPLIKATIONEN STATIK-VENT APPLICATIONS STATIK-VENT Problem: Electrostatic charges occur when winding, unwinding or rewinding foils or other materials with high surface resistivity. The intensity of this charge depends on factors such as paper speed, humidity and roller surface. Undesirable results are over-sparking, dust attraction on the surface or more problems with further processing of the materials. Solution: Transport of ions with air flow through STATIK-VENT: In order to reduce charges to material surfaces over greater distances (according to each roll diameter), ionization bars are used for neutra- lising static charges. Operating data: Part: Foils on winding machines System: STATIK-VENT, PU55FC Combi Problem: Elektrostatische Ladungen entstehen beim Aufwickeln, Abwickeln oder Umwickeln von Folien oder anderen Materialien mit hohem Oberflächenwiderstand. Die Höhe dieser Ladungen hängt von Faktoren wie Bahngeschwindigkeit, Luftfeuchtigkeit und Walzen oberflächen ab. Unerwünschte Folgen sind Entstehung von Funken- überschlägen, Staubanziehung auf der Oberfläche oder Probleme bei der Weiterverarbeitung der Materialien. Lösung: Ionentransport mit Luftunterstützung durch STATIK-VENT: Um Ladungen auf Materialoberflächen über größere Distanzen (je nach aktuellem Rollendurchmesser) zu reduzieren, können auch Ionisationsgebläse zur Neutralisierung statischer Aufladungen eingesetzt werden. Betriebdaten: Bauteil: Folien auf Wickler Geräte: STATIK-VENT, PU55FC Combi

Aufwickeln, Abwickeln und Umwickeln Winding, Unwinding …Aufwickeln, Abwickeln und Umwickeln Winding, Unwinding and Rewinding applikationEn statik-vEnt applications statik-vEnt problem:

  • Upload
    others

  • View
    16

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Aufwickeln, Abwickeln und Umwickeln Winding, Unwinding …Aufwickeln, Abwickeln und Umwickeln Winding, Unwinding and Rewinding applikationEn statik-vEnt applications statik-vEnt problem:

www.dr-escherich.com

Aufwickeln,AbwickelnundUmwickeln Winding,UnwindingandRewinding

appl ik at ionEn stat ik-vEnt appl icat ions stat ik-vEnt

problem:

Electrostaticchargesoccurwhenwinding,unwindingorrewindingfoilsorothermaterialswithhighsurfaceresistivity.theintensityofthischargedependsonfactorssuchaspaperspeed,humidityandrollersurface.Undesirableresultsareover-sparking,dustattractiononthesurfaceormoreproblemswithfurtherprocessingofthematerials.

solution:

transport of ions with air flow through statik-vEnt:

inordertoreducechargestomaterialsurfacesovergreaterdistances(accordingtoeachrolldiameter),ionizationbarsareusedforneutra-lisingstaticcharges.

operating data:

Part: FoilsonwindingmachinesSystem: StAtik-VEnt,PU55FCCombi

problem:

ElektrostatischeLadungenentstehenbeimAufwickeln,AbwickelnoderUmwickelnvonFolienoderanderenMaterialienmithohemOberflächenwiderstand.DieHöhedieserLadungenhängtvonFaktorenwieBahngeschwindigkeit,LuftfeuchtigkeitundWalzenoberflächenab.UnerwünschteFolgensindEntstehungvonFunken-überschlägen,StaubanziehungaufderOberflächeoderProblemebeiderWeiterverarbeitungderMaterialien.

lösung:

ionentransport mit luftunterstützung durch statik-vEnt:

UmLadungenaufMaterialoberflächenübergrößereDistanzen(jenachaktuellemRollendurchmesser)zureduzieren,könnenauchionisationsgebläsezurneutralisierungstatischerAufladungeneingesetztwerden.

betriebdaten:

Bauteil: FolienaufWicklerGeräte: StAtik-VEnt,PU55FCCombi

Page 2: Aufwickeln, Abwickeln und Umwickeln Winding, Unwinding …Aufwickeln, Abwickeln und Umwickeln Winding, Unwinding and Rewinding applikationEn statik-vEnt applications statik-vEnt problem:

www.dr-escherich.com

problem:

thestaticchargeonlightmouldingscancausethemtosticktotheconveyorinsteadoffallingintothebin.

solution:

neutralizingthemouldingsontheconveyorwithStAtik-VEnt.thegentleionizedairflowneutralizestheelectrostaticchargesandwillstoptheproductfollowingtheconveyorandallowittofallintothebin.

operating data:

Part: Conveyorwithmouldings

System: StAtik-VEnt,PU55FCCombi

Entladungvonteilenauftransportbändern ElectrostaticDischargeofPartsonConveyorBelts

appl ik at ionEn stat ik-vEnt appl icat ions stat ik-vEnt

problem:

AufgrundderstatischenLadungkönnenleichteSpritzgussteileamFördererhaftenbleiben,anstattindenBehälterzufallen.

lösung:

neutralisierungderSpritzgussteileaufdemFörderbandmitStAtik-VEnt.Dersanfte,ionisierteLuftstromneutralisiertstatischeAufladungenundhindertdasProdukt,weiterdemFördergerätzufolgen.DieProduktekönnenschließlichimSammelbehälterlanden.

betriebsdaten:

Bauteil: transportbandmitSpritzgussteilen

Geräte: StAtik-VEnt,PU55FCCombi

Page 3: Aufwickeln, Abwickeln und Umwickeln Winding, Unwinding …Aufwickeln, Abwickeln und Umwickeln Winding, Unwinding and Rewinding applikationEn statik-vEnt applications statik-vEnt problem:

www.dr-escherich.com

problem:

Smallcomponentsareproducedinlargebatchesandalignedinsortingpotsforthetransportsystemandfurtherprocessing.Electrostaticchargesofeachcomponentthusaccumulatehighfieldstrengthandthiscausesadhesionofthesmall,lightcomponentstoeachotherandtothesidesofthesortingpot.

solution:

Componenttransportisimprovedwhentheelectrostaticchargeswhicharesteadilybuildinguparecontinuouslyremoved.theStAtik-VEntionizerismountedabovethetransportpot.Dr.Escherichoffersionizationsystemsinvarioussizesandpowerclasses.

operating data:

Part: PartinoscillingconveyorsSystem: StAtik-VEnt,PU55FCCombi

FördertöpfeundSchwingförderer ConveyorPotsandOscillatingConveyors

appl ik at ionEn stat ik-vEnt appl icat ions stat ik-vEnt

problem:

kleineBauteilewerdeningroßerStückzahlproduziertundinSortiertöpfenfürdastransportsystemunddieWeiterverarbeitungausgerichtet.DabeikumuliertsichdieelektrostatischeLadungjedesBauteilszueinerhohenFeldstärkeimFördertopf,wasdiekleinenundleichtenteileaneinanderundandenWändendesSortiertopfesanhaftenlässt.

lösung:

DieFörderungderBauteilewirdverbessert,wenndiesichstetigaufbauendenelektrostatischenLadungenkontinuierlichabgebautwerden.DerionisatorStAtik-VEntwirdüberdemFördertopfmontiert.Dr.EscherichbietetionisationssystemeinverschiedenenBaugrößenundLeistungsklassen.

betriebsdaten:

Bauteil: FördertopfmitkleinteilenGeräte: StAtik-VEnt,PU55FCCombi

Page 4: Aufwickeln, Abwickeln und Umwickeln Winding, Unwinding …Aufwickeln, Abwickeln und Umwickeln Winding, Unwinding and Rewinding applikationEn statik-vEnt applications statik-vEnt problem:

www.dr-escherich.com

problem:

ElectrostaticchargesonsensitivepartsasPCBs,forexamplecausedbyhandlingprocesses,cancauseseveredamageonelectronicdevices.Aswellthechargesattractdustfromtheproductionenvironment.

solution:

AStAtik-VEntmountedaboveanESDworkplace,whichgeneratesandprovidescontinuousflowofionizedair.DespiteESD-conformworkplaces,chargescanoccurbyhandlingorassemblyofparts.thesechargesareimmediatelydischargedbytheStAtik-VEnt.thecontinuousdischargingalsoavoidstheattractionofdust.

operating data:

Part: Sensitiveparts

System: StAtik-VEnt,PU55FCCombi

ESD-ArbeitsplatzundStaubvermeidungESDWorkplaceandPreventionofContamination

appl ik at ionEn stat ik-vEnt appl icat ions stat ik-vEnt

problem:

ElektrostatischeAufladunghervorgerufendurchHandlingsvorgängekannbeiempfindlichenBauteilen,wieLeiterplatten,zuZerstörungsensiblerBauelementeführen.ZudemziehenaufgeladeneteileUmgebungsstauban.

lösung:

übereinemESD-ArbeitsplatzwirdeinStAtik-VEntangebaut,dasübereinenkontinuierlichenLuftstromionenzurVerfügungstellt.trotzESD-gerechterAusführungdesArbeitsplatzesentstehenAuf-ladungenbeiMontagevorgängen.DieseLadungwirdsofortneutra-lisiert.DurchdiekontinuierlicheEntladungwirdaußerdemeinAn-ziehenvonStaubdurchLadungenaufderOberflächevermieden.

betriebsdaten:

Bauteil: EmpfindlicheBauteile

Geräte: StAtik-VEnt,PU55FCCombi

Page 5: Aufwickeln, Abwickeln und Umwickeln Winding, Unwinding …Aufwickeln, Abwickeln und Umwickeln Winding, Unwinding and Rewinding applikationEn statik-vEnt applications statik-vEnt problem:

www.dr-escherich.com

SchutzdesBedienpersonalsProtectionofOperators

appl ik at ionEn stat ik-vEnt appl icat ions stat ik-vEnt

problem:

Onaconveyorbelt,smallplasticpiecesaretransportedintoacollector.Electrostaticchargesoccurduringseparatingthepartsfromthetool.thepartscanstickontheconveyorbelt,andgeneratehighstaticchargeinthecollector.Highstaticchargescanattractdustandpartic-les,butalsoenabletheoperatortounpleasantshocks.

solution:

ionizationsystemsStAtik-VEntwithalong-rangecaneliminatetheelectrostaticchargesofplasticpartsontheconveyorbeltandthecollector.theionizationsystemsshouldbechosetocoverallpossibleproblemareas.

operating data:

Part: Smallplasticpartsincontainer

System: StAtik-VEnt,PU55FCCombi

problem:

AufeinemtransportbandwerdenkleinekunststoffteileineinenSammelbehältertransportiert.DurchAufladungen,diez.B.beimEntformenderteileausdemWerkzeugentstehen,könnendieteileamtransportbandhaftenbleiben,sowiehoheLadungenimSammel-behältergenerieren.HohestatischeAufladungenkönnenStäubeundPartikelanziehenaberauchdemBedienerunangenehmeSchlägeversetzen.

lösung:

ionisierungsgeräteStAtik-VEntmitgroßerReichweitekönnendiestatischeAufladungderkunststoffteile,dertransportbänderundderSammelbehälterbeseitigenbzw.minimieren.Dieionisierungsgerätesindsoauszuwählen,dassihrWirkungsbereichmöglichstalleProb-lembereicheabdeckt.

betriebsdaten:

Bauteil: kleinekunststoffteileinBehälter

Geräte: StAtik-VEnt,PU55FCCombi