Embed Size (px)
Citation preview
Sunrise Communications AG
Network Radio Access
Hagenholzstrasse 20/22
CH-8050 Zurich
Internet
Phone
Fax
www.sunrise.ch
+41 (0) 76 777 34 67
+41 (0) 58 777 86 00
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
Engineering Central (NERAENCE)
ATOLL
Cook Book
Test Mobile Data in Atoll Version V1.1 Author Nicolas Paul Date February 11, 2008
Title
Version
ATOLL / Cookbook RF Data Built
V1.1 / February 11, 2008
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
Table of Contents
1 Introduction .............................................................................................................. 3 1 Report Revision History ..............................................................................................3
2 Export Test Mobile Data from DPIMap...................................................................... 4 Step 1. Open DPIMap .................................................................................................4 Step 2. Zoom In to the area you want to have Test Mobile Data. ..................................4 Step 3. Click on the icon “Load Measurement File”. ......................................................4 Step 4. Select your area..............................................................................................4 Step 5. Select the Drive Test and Click Ok....................................................................5 Step 6. Select the Test Mobile data with an SQL Query.................................................5 Step 7. Export the Query to a *.txt File........................................................................7
3 Import your Test Mobile data file into Atoll.............................................................. 8 Step 1. Import your file *.txt.......................................................................................8 Step 2. General Setup.................................................................................................8 Step 3. Setup .............................................................................................................9 Step 4. Predefined Setup .......................................................................................... 10 Step 5. Display ......................................................................................................... 11
4 Example................................................................................................................... 12 1 Serving Cell.............................................................................................................. 12 2 RSCP ....................................................................................................................... 12 3 Ec/Io ....................................................................................................................... 13 4 Polluter.................................................................................................................... 13 5 Distance .................................................................................................................. 14 6 Tip Text................................................................................................................... 14
Title
Version
Page
ATOLL / Test Mobile Data in Atoll
V1.1 / February 11, 2008
3/14
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
1 Introduction
This document describes how to import Test Mobile data From DPIMap into Atoll.
1 Report Revision History
Version Date Author Comments
Draft 0.1 2008-01-29 Paul N. Draft Version
Version 1.0 2008-02-11 Paul N. Initial Version
Title
Version
Page
ATOLL / Test Mobile Data in Atoll
V1.1 / February 11, 2008
4/14
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
2 Export Test Mobile Data from DPIMap.
Most of the Test Mobile Data are available in DPImap. You can easily select an area and choose the linked Test Mobile Data thanks to this tool. Those samples can be exported to a text file to be used by Atoll.
Step 1. Open DPIMap
Step 2. Zoom In to the area you want to have Test Mobile Data.
Step 3. Click on the icon “Load Measurement File”.
Step 4. Select your area
Title
Version
Page
ATOLL / Test Mobile Data in Atoll
V1.1 / February 11, 2008
5/14
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
Step 5. Select the Drive Test and Click Ok.
By doing this selection you create a TEMSLOG file in DPIMap. Keep in mind the Attenuation used during the Drive Test, if it is not mentioned consider 1dB as a default value. This attenuation will be used during the import in Atoll. Select only one type of Measurement (either UMTS or GSM).
Step 6. Select the Test Mobile data with an SQL Query
Title
Version
Page
ATOLL / Test Mobile Data in Atoll
V1.1 / February 11, 2008
6/14
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
UMTS Query:
GSM Query: And Click Ok You can also Load the Predefined Query under V:\Application\RadioPlanning\Data\Configuration_File\Test_Mobile_Data
UMTS Test Mobile Data Query GSM Test Mobile data Query Error! Objects cannot be created from editing field codes.
Error! Objects cannot be created from editing field codes.
Title
Version
Page
ATOLL / Test Mobile Data in Atoll
V1.1 / February 11, 2008
7/14
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
Step 7. Export the Query to a *.txt File
Title
Version
Page
ATOLL / Test Mobile Data in Atoll
V1.1 / February 11, 2008
8/14
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
3 Import your Test Mobile data file into Atoll Step 1. Import your file *.txt
Step 2. General Setup
Apply under Losses the Attenuation (cable & Connectors & Attenuator) used during the Drive test.
Title
Version
Page
ATOLL / Test Mobile Data in Atoll
V1.1 / February 11, 2008
9/14
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
Step 3. Setup
GSM Test Mobile Data Setup
UMTS Test Mobile Data
Title
Version
Page
ATOLL / Test Mobile Data in Atoll
V1.1 / February 11, 2008
10/14
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
Step 4. Predefined Setup
You can import the predefined Setup under:
V:\Application\RadioPlanning\Data\Configuration_File\Test_Mobile_Data (NumMeasINIFILE.ini)
Title
Version
Page
ATOLL / Test Mobile Data in Atoll
V1.1 / February 11, 2008
11/14
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
Step 5. Display
Under Test_Mobile_Data / Properties, you can import a Config File to change the Display setting.
Some predefined Config_file are available under:
V:\Application\RadioPlanning\Data\Configuration_File\Test_Mobile_Data
UMTS RSCP Test_Mobile_Data_Config_UMTS_RSCP.cfg
UMTS Ec/Io Test_Mobile_Data_Config_UMTS_EcIo.cfg
UMTS Polluter Test_Mobile_Data_Config_UMTS_Polluter.cfg
UMTS Distance Test_Mobile_Data_Config_UMTS_Distance.cfg
UMTS Serving
Cell Test_Mobile_Data_Config_UMTS_Serving_Cell.cfg
GSM RxLev Test_Mobile_Data_Config_GSM_RxLev_DPIMap.cfg
GSM RxLev Test_Mobile_Data_Config_GSM_RxLev_Wording_Of_Signal_Strength.cfg
GSM RxQual Test_Mobile_Data_Config_GSM_RxQual_DPIMap.cfg
GSM Serving Cell Test_Mobile_Data_Config_UMTS_Serving_Cell.cfg
GSM Distance Test_Mobile_Data_Config_GSM_Distance.cfg
GSM TA Test_Mobile_Data_Config_GSM_TA.cfg
GSM TxPwr Test_Mobile_Data_Config_GSM_TxPwr.cfg
For the Serving Cell display, you have first to make au automatic display on the Transmitters properties.
You can then update the Test Mobile Data Serving Cell display.
Title
Version
Page
ATOLL / Test Mobile Data in Atoll
V1.1 / February 11, 2008
12/14
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
4 Example
1 Serving Cell
2 RSCP
Title
Version
Page
ATOLL / Test Mobile Data in Atoll
V1.1 / February 11, 2008
13/14
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
3 Ec/Io
4 Polluter
Title
Version
Page
ATOLL / Test Mobile Data in Atoll
V1.1 / February 11, 2008
14/14
The material contained within this documentation is legal property of Sunrise Communications AG and may not be copied,
reproduced or published by any methods without prior written permission of Sunrise Communications AG.
5 Distance
6 Tip Text
