Asamblari Filetate (Catalog BOLLHOFF)

8/17/2019 Asamblari Filetate (Catalog BOLLHOFF)

1/20

Fastener Service Supply

1180/08.02

Products and Services


2/202

Joining together!

Our company vision expresses the way we carry out our business day

to day.

We apply it to our product program - the world of fastening and assembly technology. Our motto,

“Joining together!” also shows how we focus on people. People, with their own internal and

external connections, who form the basis of our present and future success. Courage, fairness

and loyalty have been the cornerstones of our company culture for four generations.

Our success has benefited our customers, our business partners and our staff.

Joining together!

Wilhelm A. Böllhoff and Michael W. Böllhoff


3/203

As an international service provider, developing and producing our own products, we are one

of the leading suppliers of fastening, assembling and systems technology in Europe and America.

The headquarters of this family business, with four generations of history, is in Bielefeld.

Our product range includes more than 100,000 items ranging from standard screw fasteners right

through to fully automated assembly machines.

With over 2,000 staff and a turnover of around € 420 million (2007), we have 42 locations world-

wide in 22 countries. Outside these countries representatives and agents are in close partnership

with our international customers.

As well as providing an innovative range of fasteners, we have established ourselves as technologi-

cally competent partners and complete suppliers for a wide range of technologies and services.

Our team of qualified technical advisers provides competent day-to-day assistance

on-site.

The Böllhoff Group


4/204

Our network of branches in the world

Subsidiary in

Birmingham (UK) Headquarter in Bielefeld with branches in

Bielefeld, Braunschweig, Dormagen, Leipzig,

Munich, Nuremberg and Stuttgart

Companies in Krzemienica and

Wrocław (Poland)

Affiliates in France, Italy and

Spain

Affiliates in Argentina, Brazil,

Mexico, the USA and Canada

Affiliates in China, Russia,

India, Japan, South Africa

and Turkey

Affiliates in Austria, Hungary, Romania,

Slovakia and the Czech Republic

Competent partner for innovative industries

We always work in close co-operation with our

customers to develop and select our production range.

This mutual dialogue is a strong basis for our product

competence and closeness to market. We also offer a

clearly structured range of services, geared to the

needs of our target market, which guarantees that

users from all sectors always have a competent advisor

to turn to.

To be close to your customers on a regional level, you need a global presence. Our network

of 42 locations in 22 countries, as well as representation on five continents, allows us access to all

important markets. Our competence and experience mean that we are a reliable on-site partner.


5/205

A full spectrum of services for fasteners

From A-Z

Variety is our aim. Whether it is screws, fasteners or

rivets – we offer custom solutions of the highest quality

– even for particularly demanding tasks. We are

supported by a close-knit distribution network, which

ensures close proximity to customers. This enables us

to offer a particularly attractive ratio of price, availability

and quality.

Technical application consultancy

Optimum fasteners and fixings do not come about by chance.

That is why we work with our customers to develop complete indivi-

dual solutions. The sooner our specialists are consulted, the better,

because even during the design phase of a product, there is

considerable potential for optimisation, in terms of production and

assembly. Our engineers analyse how the number of different parts

can be lowered, how assembly can be simplified and how quality can

be improved.

Logistics services

Companies of all sectors and sizes structure themselves to be quick, streamlined,

flexible and efficient. To achieve this, it is necessary to optimise the supply chain

of materials with similarly finely-tuned logistics. We help our clients to reduce

costs, simplify processes, reduce storage requirements and prevent bottlenecks

throughout the value chain.

We know our customers' business and we want to make a lasting contribution to

their added-value. That is why our work is customer-oriented and we think in terms

of systems: optimising processes, reducing costs, strengthening competitive positi-

ons. This is the value we offer our customers and it is also how we measure our suc-

cess.

Products

ECOTECH

ECOSIT®


6/206

Our range of catalogue items – Blue Pages

DIN-ISO Standard parts

We deliver over 42,000 DIN/ISO standard fasteners

and fixings made from steel, stainless steel, brass or

plastic, direct from stock, within 24 hours. Our broad

range covers everything from our branded products to

fully automatic assembly machines.

Some products from other leading producers complete

our comprehensive catalogue. In the area between de-

sign and application conditions, products from EJOT,

NORDLOCK, Fischer/UPAT etc. provide the necessary

security.

The worldwide success of our products is built on

an uncompromisingly high standard of quality, close

proximity to the customer and qualified staff, whosededication to service is central to our performance.

ECOLINE®

Global markets demand a fast and integrated flow of

information. With the ECOLINE® e-business solution,

we have established an online platform for efficient

supply chains. A customer-specific EDI connection,

electronic catalogues and the online shop are some

of the key components of electronic communication.

As a complement to standardised fasteners and indivi-

dual parts as per drawing, we offer you further C-parts

with our ECOSIT ® procurement and supply systems.

Our range comprises products of the fields of hydraulic

fittings, electronic articles, seals, cables ties, springs,

ball bearings and others. All in all, it is the entire range

of C-parts that can reasonably and economically be

included into an ECOSIT ® system.

Other assortments of articles in C-parts management


7/207

Custom-made parts

Our complete dedication to meeting customer requirements means that we always

find the most suitable and reliable solution. If necessary, we produce custom-made

parts in a wide variety of materials and machining depths. This includes machining

steel, cementation and heat treatable steel, rust- and acid-resistant steel, heat-

resistant materials, nickel, titanium, bronze, copper, brass and aluminium alloys as

well as plastic.

Various post-treatments

Grinding, milling, honing, and lapping, cutting and

rolling threads, barrel finishing and sandblasting,

hardening and heat treating, mounting, pressing etc.

Surface treatments

Galvanising, nickel-plating, chrome-plating, bronzing,

phosphating, anodising, zinc-coating, organic coating

and dust coating and seal coating etc.

Cold-formed parts

Special screws, step pins, internally threaded parts and

sleeves for large production runs. Materials: steel,

stainless steel, aluminium, non-ferrous metals, special

materials

Hot-formed parts

Bolts, construction elements and special screws and

nuts with high degree of shaping or in small quantities.

Materials: steel, stainless steel, special materials

Precision machined parts

Machined construction elements, with or without

threading, in small or large quantities. Material: steel,

stainless steel, aluminium, non-ferrous metals, special

materials

Stamped and stamp-bent parts

Construction elements and near-flat parts from sheets

or bands of material.Material: steel, stainless steel, aluminium, non-ferrous

metals, special materials


8/208

Products designed and produced by Böllhoff

Fasteners for sheets and profiles RIVKLE®

For internal and external threading on components, which cannot have

a cut thread because of their low wall strength, we offer the RIVKLE®

blind rivet nuts and studs. Because of its "blind" assembly, it can also

be used for hollow profiles. The particular advantage compared to

fasteners with threaded nuts is the quick application process and the

low processing costs, due to the minimal use of tools. We offer a wide

range of products as standard, as well as a large number of special

bespoke versions.

Thread inserts for plastics AMTEC®

AMTEC® thread inserts were designed for installation

following the moulding of plastic components. This can

allow considerable cost savings when manufacturing

plastic parts, as inserting and injection-moulding

around threaded parts may not always work.

We offer threaded inserts for all common embedding

procedures.

Thread inserts for metals HELICOIL® plus

With the HELICOIL® plus and HELICOIL® tangless threaded inserts, we can offer

an internationally proven solution for extremely firm threading in metals with a lowshear resistance using the smallest possible space. HELICOIL® thread inserts feature

high resistance to wear and tear, low thread friction in narrow tolerances, high

surface quality and resistance to both corrosion and temperature. The thread for

HELICOIL® screwlock inserts can also be screwed to the integrated pullout protection

system to strengthen the thread.


9/209

Products designed and produced by Böllhoff

QUICKLOC® Quick locking systems made of plastic, metal or

plastic/metal combinations

The QUICKLOC® quick locking systems are the ideal fastener for

very different application areas and requirements. The system is used

anywhere, where fast and frequent opening and closing is required,

such as maintenance covers, cladding and faceplates. There are

various types, ranging from clamping, turning and pressure fasteners

to complex locking systems. Through its ease of maintenance and

operation QUICKLOC® ensures low repair and assembly costs.

RIVQUICK ® Blind rivets

For connecting thin-walled components, we offer a cost-effective so-

lution RIVQUICK ® blind rivets. As well as standard blind rivets, Varigrip

multi-application blind rivets, featuring a particularly large clamping

area, are also available. That guarantees a tight, vibration-free fit even

with great bore tolerances. In addition, we also offer a large variety of

special products, developed in-house. It goes without saying that we

also supply the appropriate manual and mechanical setting tools.

With SEAL LOCK ® Without SEAL LOCK ®

sealing nut sealing nut

SEAL LOCK ® sealing nuts and bolts

Sealing bolt/nut connections in the thread and below the nut support

plate normally requires considerable effort such as mechanical

processing of the support plate surface, sealing glue and

other sealing components. SEAL LOCK ® sealing nutsand bolts offer the discerning design engineer one-piece

components, which seal in the thread and also under the

head at the same time, against liquids and gases under high

pressure. And this property is guaranteed, even after loosening

and tightening several times.


10/2010

Services: ECOSIT® – ECO nomic Supply I n T ime

For fasteners and fixings (C parts), the processing costs are disproportionate to the

price of the part:

Although they only make up 20% of purchase volumes, they are responsible for

about 80% of the procurement costs. To put it another way, the unit price is low, butthe procurement costs are high.

The high procurement costs come about because of the large number of internal

processes, which are constantly repeated, and always for the same items.

There are often large potential savings to be made in operating processes:

■ Overall planning

■ Detailed planning

■ Ordering

■ Receiving goods

■ Incoming goods inspection

■ Internal distribution

■ Storage

■ Distribution to production line

Experience shows that considerable savings are possible with economic supply

systems.

ECOSIT ® is flexibly equipped for different types of logistical process-

ing. The ideal solution can always be developed, tailored to the items

and requirements of the customer. This consistently guarantees

need-oriented and just-in-time supply for 100% availability.

■ SingleBin and MultiBin:

For every item, the customer can choose between one (SingleBin)

or several storage containers (MultiBin). We fill up the SingleBins at

agreed intervals on-site, the empty MultiBin is exchanged for a full

container.

■ SmartBin:

The storage containers are placed on scales, which communicate

their status to us online. As soon as a specified level is passed, the

necessary delivery is sent.

■ SensorBin:

This method works using an ultrasound sensor. There are at least

two containers for each item on the customer's shelf. With the help

of the ultrasound sensors, we are immediately informed when an

empty container is removed. Generally these systems are used

when the containers are changed extremely often.

Custom-made ECOSIT® systems

P u r c h a s e v o l u m

e

P r o c u r e m e n t c o s t s

80%

20%

20%

80%

A/B parts

C parts

Savings potential


11/2011

In order to simplify processes, make full use of potential and achieve 100% operating

reliability ECOSIT ® incorporates all operating processes.

Every ECOSIT ® system is an individual solution and is based on a close partnership

with the customer. As well as increased efficiency and cost reductions, our service

focuses on high quality and transparency.

■ ScanCard:

Supply is controlled by a Kanban card and is carried out without containers. We deliver the goods in the original

packaging to a specified unloading point.

■ ShelfScan:

This process also works without storage containers.

The customer manages the shelves himself. He checks the

barcode of the required article with a scanner and communi-

cates the data to us.

Bundle services and save costs


12/2012

Services: ECOTECH – ECOnomic TECHnical Engineering

Costs can be reduced by optimising products or the manufacturing process.

The earlier optimisation is started in the research and development process, the

greater the potential for savings.

As a service provider that carries out its own production and development, we

have the necessary experience of application and manufacturing technology to

recommend the most economic fastening technology. Often changing the

production machine and/or the primary material makes the process more economic,

while product quality is maintained or increased.

Savings potential

The cost-efficiency of joints does not depend as much on the price of the fastener as it does on the costs for

preparation and assembly of the parts to be joined.

The major cost drivers in the process are design, production, quality control, logistics, storage, assembly,

commitment of capital.

Compared to this, the unit price of the fastener, at 20%,

is relatively low.

The future manufacturing costs of a product are, to a

large extent, determined at the design stage of a new

development. This means that the earlier the fastening

technology specialists are brought in, the better.

Value analysis and engineering


13/2013

Technical analysis

With our accredited laboratory we offer comprehensive support for the client's

design department:

■ Preload force measurement■ Adhesion factor analysis

■ Material analysis

■ Compression behaviour

■ Insertion tests

■ Corrosion protection tests

■ Tensile tests

We also produce on our own prototypes for custom-

made fasteners as part of the ECOTECH range of

services.

Products and markets develop at great speed. Increasing competition and new laws present manufacturers and

service providers with the challenge of developing alternative technical solutions.

We have always seen ourselves as partners of

innovative sectors and we give our customers regular

updates on current technical trends – from the area of

fastening technology to corrosion protection or screw

locking.

Our communication with our customers includes

technical seminars, as well as the technical information

“Böllhoff Bulletin” and the “Blue Pages”.

Information and consultancy


14/2014

Our accredited laboratory has been DIN EN ISO EIC17025:2000 certified since 1999. The main quality

management facility is equipped for mechanical and

physical testing as well as chemical material analysis

using the latest processes and advances. For challen-

ging bespoke solutions the accredited laboratory is the

first station on the way into practice.

Our fasteners are used in cars and aeroplanes.

This means that the highest product quality is a

fundamental requirement for us. The latest camera

technology is used for 100% product checking.

Accredited laboratory

Quality management

We have six high-performance logistics centres in

Germany and Austria, as well as further logistics locati-

ons in Europe and around the world. Regional coverage

shortens supply distances and times for our customers.In markets, where we do not have our own subsidiaries,

we are represented by our alliance partner, Bossard,

supplementing their competence with our range of

services. This allows us to offer our services to our

multinational industrial clients everywhere they have a

presence.

2-B global

Core competences

As a supplier of fasteners, we have adapted our internal

processes perfectly to our customers. Our quality

management has already received numerous awards,

for example ISO/TS 16949:2002 certification, the

highest international standard for the automobile

industry, DIN EN ISO 14001, the environmental

standard, as well as IRIS, the International Standard

for the Railway Industry.

Certification


15/2015

Other Böllhoff divisions

Systems technology

Fastening and assembly technology

We have combined our technical assembly expertise

in the areas of screws, self-piercing rivets and clinch

points under the umbrella of systems technology.

Mechanical Clinching Technology

The area of mechanical clinching technology featuring

RIVSET ® self-piercing technology and RIVCLINCH®

clinching technology creates application-specific

solutions for joining sheets and profiles: we have

customer-specific plans from handheld appliances

down to systems with robot connections.

Screw Technology

Our screw technology department offers a wide variety

of screw devices and systems with automatic screw

feeding for very different applications with proven quality

under the UNIQUICK ® brand. The spectrum of products

ranges from hand-driven screws to stationary screw

systems with a modular structure. What they have in

common is high flexibility of application and a broad

range of feed systems for screws and fasteners.

We bring expertise from decades of experience to the

different fields of fastening and assembly technology.

We offer joining solutions for metals and plastics,

including blind rivets, threading technology or plasticand quick locking technology.

If our broad spectrum of products does not cover an

application, we create innovative solutions, working

together with our customers. We can draw on our

development department and various production

technologies at six production centres worldwide.

We do not just consider the fastener itself – we also

offer the accompanying machines and systems used

for processing. Our spectrum ranges from hand-held

appliances to process-monitored, robot-operated

processing systems for state-of-the-art line production.

Our coordinated fasteners and processing units ensure

an optimum production process for our customers.


16/2016

Overview DIN/ISO/B/TYP From 1 to 635005 · For drawings laid out according to co-ordinates see pages 18 /19 (e.g. Taper pins = E 11)

0 – 500

Type 0417 UNITEC® K’ in K’ (plastic in plastic) plastic threaded inserts / G 14

DIN 1 Taper pins / E 11

DIN 7 Parallel pins / F 11

DIN 84 Slotted cheese head screws / A 1

D IN 85 S lo tted pan head sc rews / B 1

DIN 93 Washers with tabs / A 9

DIN 94 Split pins / G 11

DIN 95 Slotted raised countersunk head wood screws / Y 4

DIN 96 Slotted round head wood screws / Z 4

DIN 97 Slotted countersunk head wood screws / A 5

DIN 124 Round head rivets for steel construction / F 10

DIN 125 Washers, round B 9 / E 9

D IN 126 Washers, round / B 9

DIN 127 Spring washers, bent or f lat / F 9

DIN 128 Spring washers, curved or wave / G 9

B 151 Verbus Tensilock self-locking screws / P 2

B 158 Verbus Ripp se lf -locking screws / P 2

Type 163 UNITEC® K’ in K’ (plastic in plastic), plastic threaded inserts / H 14

Type 173 UNITEC® K’ in K’ (plastic in plastic), plastic threaded inserts / G 14

DIN 186 T-head bolts with square neck / C 3

DIN 188 T-head bolts with double nib / D 3

B 193 Verbus Ripp lock nuts / E 8

B 196 Ve rbus Tens il ok lock nut / E 8

Type 230 AMTEC® Threaded inserts, EXPANSIONSERT 1,Standard/ B 14

Type 231 AMTEC® Threaded inserts, EXPANSIONSERT 1, Flange / B 14

Type 232 AMTEC® Threaded inserts, EXPANSIONSERT 1, Clinch / B 14

Type 235 AMTEC® Threaded inserts, EXPANSIONSERT 2, / C 14

B 251 Inbus Ripp se lf -locking screws / R 2

DIN 258 Taper pins with threaded ends / I 11

DIN 261 T-head bol ts / C 3DIN 302 Countersunk head rivets / G 10

DIN 315 Wing nuts / F 6

B 315 Wing nuts, Amer ican type / E 6

DIN 316 Wing screws / E 3

B 316 Wing screws , Amer ican type / F 3

B 317 Wing nuts, UNITEC® / F 8

B 318 Wing nuts, UNITEC® / F 8

D IN 404 Caps tan s crews / C 1

DIN 417 Slotted set screws with full dog point / L 5

DIN 427 Slotted headless screws with chamfered end / M 5

DIN 431 Pipe nuts / G 6

DIN 432 Washers with external tab / I 9

DIN 433 Washers for cheese head screws / B 9

DIN 434 Square taper washers for channels / K 9

DIN 435 Square taper washers for I sections / K 9

DIN 436 Square washers for wood / L 9

DIN 438 Slotted set screws with cup point / N 5

DIN 439 Hexagon thin nuts / H 6

DIN 440 Washers with round hole, type R / B 9

DIN 440 Washers with square hole, type V / M 9

DIN 442 Sealing caps for rol ling in / B 13

DIN 443 Sealing caps for pressing in / C 13

DIN 444 Eye bolt s / G 3

DIN 462 Interna l tab washers / N 9

DIN 463 Washers w ith 2 tabs / O 9DIN 464 Knurled thumb screws, high type / H 3

DIN 466 Knurled thumb screws, high type / I 6

B 466 Knurled thumb nuts , h igh type F, UNITEC® / G 8

B 466 Knurled thumb nuts, high type G, UNITEC® / G 8

DIN 467 Knurled thumb nuts, f lat type / K 6

B 467 Knurled thumb nuts , thin type F, UNITEC® / H 8

B 467 Knurled thumb nuts, th in type G, UNITEC® / H 8

D IN 470 Lock washe rs / D 13

DIN 471 Circl ips for shaf ts / O 12

DIN 472 Circl ips for bores / P 12

DIN 478 Square head bolts with collar / I 3

DIN 479 Square head bolts with short dog point / K 3

DIN 480 Square head bolts with collar and oval half dog point / L 3

501 – 1000

DIN 525 We ld ing s tuds / M 3

DIN 526 Safet y cups / P 9

DIN 529 Foundat ion bol ts / N 3

DIN 546 Slotted round nuts / L 6

DIN 547 Round nuts with dril led holes / M 6

DIN 548 Round nuts with set pin holes / N 6DIN 551 Slotted set screws with flat point / O 5

DIN 553 Slotted set screws with cone point / P 5

DIN 557 Square nuts / P 6

DIN 558 Hexagon head screws, ful l threading / C 2

DIN 561 Hexagon head screws with full dog point, small head / D 2

D IN 562 Squa re thi n nuts / R 6

DIN 564 Hexagon head screws with coned half dog point / E 2

DIN 571 Hexagon head wood screws / B 5

B 571 Caps for DIN 571 / B 5

DIN 580 L if ting eye screws / O 3

B 581 L if ting eye screws, octagonal / P 3

D IN 582 L if ti ng eye nu ts / S 6

DIN 601 Hexagon head bolts with shank / G 2

DIN 603 Mushroom head square neck bolts / R 3

DIN 604 Countersunk nib bol ts / S 3

DIN 605 Countersunk square neck bolts / T 3

DIN 607 Mushroom head n ib bolts / U 3

DIN 608 Countersunk square neck bolts / T 3

DIN 609 Hexagon fit bolts with long threaded dog point / F 2

DIN 610 Hexagon fit bolts with short threaded dog point / F 2

DIN 653 F lat knur led thumb screw / V 3

DIN 660 Round head rivets / F 10

DIN 661 Countersunk head rivets / G 10

DIN 662 Button head r ivets / H 10

DIN 674 Mushroom head r ivets / I 10DIN 675 Flat countersunk head rivets / K 10

DIN 705 Bright set collars / N 12

Type 733 AMTEC® threaded inserts, SONICSERT ®, through bore,

insertable on both sides / Z 13

Type 733 AMTEC® threaded inserts, SONICSERT ®, through bore,

insertable on one side / Z 13

Type 734 AMTEC® threaded inserts,SONICSERT ®, with flange, through

bore / Z 13

Type 743 AMTEC® threaded inserts, SONICSERT ®, with bolt / A 14

Type 744 AMTEC® threaded inserts, SONICSERT ® with bolt and flange /

A 14

DIN 787 Bolts for T-slots / W 3

DIN 797 Foundat ion bol ts / R 5

DI N 798 Foundat ion nuts / T 6

Type 831 AMTEC® Threaded inserts, SPREDSERT ® 1 / D 14



Type 835 AMTEC® Threaded inserts, SPREDSERT ® with collar / E 14

Type 837 AMTEC® Threaded inserts, SPREDSERT ® 2 / E 14DIN 906 Hexagon socket pipe plugs / V 12

DIN 907 Core plugs / W 1 2

DIN 908 Hexagon socket pipe plugs with collar / X 12

DIN 910 Hexagon head pipe plugs with collar / Y 12

DIN 911 Hexagon socket keys / Z 10

DIN 912 Hexagon socket head cap screws / U 2

DIN 913 Hexagon socket set screws with flat point / T 5

DIN 914 Hexagon socket set screws with cone point / U 5

DIN 915 Hexagon socket set screws with full dog point / V 5

DIN 916 Hexagon socket set screws with cup point / W 5

DIN 917 Hexagon cap nuts, thin form / U 6

DIN 920 Slotted pan head screws, small head / D 1

DIN 921 Slotted pan head screws, large head / E 1

DIN 922 Slotted pan head screws with full dog point, small head / F 1

DIN 923 Slotted pan head screws with shoulder / G 1

DIN 924 Slotted raised countersunk head screws with shoulder / H 1

DIN 925 Slotted countersunk head screws with full dog point / H 1

DIN 926 Slotted set screws with ful l dog point / X 5

DIN 927 Slotted shoulder screws / Y 5

DI N 928 Square weld nuts / V 6

DIN 929 Hexagon weld nuts / W 6

Type 931 AMTEC® threaded inserts, HITSERT ®, with flange, through

bore / X 13

DIN 931 Hexagon head bolts with shank / G 2

Type 932 AMTEC® threaded inserts, HITSERT ® , through bore / X 13DIN 933 Hexagon head screws with full thread / C 2

DI N 934 Hexagon nuts / O 6

DIN 935 Hexagon slotted nuts and castle nuts / X 6

DIN 936 Hexagon thin nuts / R 6

Type 937 AMTEC® threaded insert, SONICSERT ® SCREWLOCK ® / W 13

DIN 938 Studs, threaded end, 1 d long / S 5

DIN 939 Studs, threaded end, 1.25 d long / S 5

DIN 940 Studs, threaded end, 2.25 d long / S 5

Type 940 AMTEC® threaded inserts HITSERT ® with bolt / Y 13

Type 941 AMTEC® threaded inserts, HITSERT ® with bolt and flange / Y 13

DIN 960 Hexagon head bolts with shank, fine thread / G 2

DIN 961 Hexagon head screws, fully threaded, fine thread / C 2

DIN 963 Slotted countersunk head screws / I 1

DIN 964 Slotted raised countersunk head screws / K 1

DIN 965 Cross recessed countersunk head screws / L 1

DIN 966 Cross recessed raised countersunk head screws / M 1

DIN 976 Stud bolts / Z 5

DIN 979 Hexagon thin slotted nuts and castle nuts / Y 6

DIN 980 Prevailing torque type self-locking nuts / Z 6

DIN 981 Lock nut for rol ler bearings / A 7

DIN 982 Self-locking hexagon nuts, high form / Z 6

DIN 983 Circl ips with tabs, for shafts / R 12

DIN 984 Circl ips with tabs, for bores / S 12

DIN 985 Self-locking hexagon nuts, thin form / Z 6

DIN 986 Self-locking hexagon cap nuts / B 7

DIN 987 Plate nuts, self-locking / C 7

DIN 988 Shim rings and supporting rings / B 9

1001 – 5000

Type 1030 KOBSERT ®, threaded bushes with locking flange, through

bore / G 13

Type 1031 KOBSERT ®, threaded bushes with locking flange and sealing

ring, through bore / G 13

Type 1032 KOBSERT ®, threaded bushes, with sealing ring, locking flange

and support washer, through bore / G 13

Type 1033 KOBSERT ®, threaded bushes with sealing ring and locking

flange, parent bore / G 13

Type 1040 KOBSERT ®, threaded bushes HP, heavy-duty type with locking

flange, through bore / H 13

Type 1041 KOBSERT ®, threaded bushes HP, heavy-duty type with sealing

ring and locking flange, through bore / H 13

B 1052 Washers for wood constructions / D 9

ISO 1207 Slotted cheese head screws / A 1

Type 1230 AMTEC® threaded inserts, QUICKSERT ® expansion / V 13

ISO 1234 Spl it pins / G 11

Type 1240 AMTEC® threaded inserts QUICKSERT ®, with bolt / V 13DIN 1433 Clevis pins without head / K 11

Type 1433 Threaded inserts, self-tapping, with flange, QUICKSERT ® / F 14

Type 1434 Threaded inserts, self-tapping, QUICKSERT ® / F 14

DIN 1434 Clevis pins with small head, type M / L 11

DIN 1435 Clevis pins with small head, type MG / L 11

DIN 1436 Clevis pins with large head / M 11

Type 1437 AMTEC® threaded inserts, QUICKSERT ® hex, with hexagon

socket, self-tapping / F 14

Type 1438 AMTEC® threaded inserts, QUICKSERT ® hex, with flange and

hexagon socket, self-tapping / F 14

DIN 1440 Washers for clevis pins, type M / B 9

DIN 1441 Plain washers for clevis pins / B 9

DIN 1443 Clevis pins without head / K 11

DIN 1444 Clevis pins with head / M 11

DIN 1445 Clevis pins with head and threaded stem / N 11

DIN 1469 Half-length taper grooved pins with gorge / O 11

DIN 1470 Grooved pins with pilot / P 11

DIN 1471 Full length taper grooved pins / R 11

DIN 1472 Grooved pins / S 11

DIN 1473 Parallel grooved pins with chamfer / T 11

DIN 1474 Reverse grooved pins / U 11

DIN 1475 Centre grooved pins / V 11

DIN 1476 Round head grooved pins / W 11

DIN 1477 Countersunk head grooved pins / X 11

DIN 1478 Turnbuckle nuts made from steel tube / D 7

DIN 1479 Turnbuckle nuts made from hexagon steel / E 7

ISO 1479 Hexagon head self-tapping screws / M 4

DIN 1480 Turnbuckle nuts, forged / F 7

DIN 1481 Slotted spring pins (spring sleeves), heavy type / Y 11

ISO 1580 Slotted pan head screws / B 1

DIN 1587 Hexagon domed cap nuts / G 7

EN 1665 Hexagon screws / M 2

DIN 1804 Round nuts for machine tools / A 7

DIN 1816 Round nuts with set pin holes / H 7

Type 1932 RIVSET ® Self-pierce rivets / I 14 / K 14

Type 1942 RIVSET ® Self-pierce rivets / I 14 / K 14

ISO 2009 Slotted countersunk head screws / I 1

ISO 2010 Slotted raised countersunk head screws / K 1

DIN 2082 Nuts for milling machine arbours / I 7

DIN 2093 Disc spr ings / R 9

ISO 2338 Paral le l p ins / F 11

ISO 2339 Taper p ins / E 11

ISO 2340 Clevis pins without head / K 11ISO 2341 Clevis pins with head / L 11 / M 11

ISO 2342 Slotted headless screws with chamfered end / M 5

DIN 2509 Double end studs / A 6

DIN 2510 Bolted connections with reduced shank, type L, K and Z / B 6

DIN 2510 Bolted connections with reduced shank, type KU and ZU / C 6

DIN 2510 Cap nuts / K 7

ISO 4014 Hexagon head bolts with shank / G 2


ISO 4017 Hexagon head screws, fully threaded / C 2

ISO 4018 Hexagon head screws, fully threaded / C 2

ISO 4026 Hexagon socket screws with flat point / T 5

ISO 4027 Hexagon socket screws with cone point / U 5

ISO 4028 Hexagon socket screws with full dog point / V 5

ISO 4029 Hexagon socket screws with cup point / W 5

ISO 4032 Hexagon nuts / O 6

ISO 4035 Hexagon thin nuts / H 6

DIN 4626 Spr ing bol ts / V 2

ISO 4762 Hexagon socket head cap screws / U 2

ISO 4766 Slotted set screws with flat point / O 5

5001 – 10000

DIN 5406 Lock washers for roller bearings / T 9

DIN 5586 Locking screws with collar and vent / Z 12

DIN 5903 F ish bol ts / X 3 / Y 3

DIN 5914 Rai l screws / I 4

DIN 6303 Knurled thumb nuts / K 6

DIN 6304 Tommy screws, fixed T / Z 3

DIN 6305 Tommy nuts, fixed T / M 7

DIN 6306 Tommy screws, loose T / Z 3

DIN 6307 Tommy nuts, loose T / M 7

DIN 6319 Spherical washer, type C / S 9

DIN 6325 Parallel pins, hardened / Z 11

DIN 6330 Hexagon nuts, 1.5 d high / P 7

DIN 6331 Hexagon nuts, 1.5 d with collar / N 7

DIN 6332 Grub screws with thrust point / D 6

DIN 6334 Long hexagon nuts / R 7

DIN 6340 Washers for clamping devices / C 9

DIN 6367 Cutter retaining screws for milling machine arbours / A 4

D IN 6378 C lip bol ts / B 4

Type 6683 RIVKLE® Blind rivet nut with slot ted round body, open,

steel / P 13

DIN 6791 Semi-tubular rivets with half round head / L 10

DIN 6792 Semi-tubular rivets with countersunk head / M 10

DIN 6796 Conical spring washer / R 9

DIN 6797 Toothed lock washers, type J / V 9

DIN 6797 Toothed lock washers, type A / U 9DIN 6797 Toothed lock washers, type V / W 9

DIN 6798 Serrated lock washers, type J / X 9

DIN 6798 Serrated lock washers, type A / Y 9

DIN 6798 Serrated lock washers, type V / Z 9

DIN 6799 Locking washers for shafts / T 12

DIN 6881 Saddle keys / F 12

DIN 6883 Paral le l keys / G 12

DIN 6884 Gib-head parallel keys / H 12

DIN 6885 Paral le l keys / I 12

DIN 6886 Taper keys, rounded-ended, type A / G 12

DIN 6886 Taper keys, square-ended, type B / K 12

DIN 6887 Gib-head keys / H 12

DIN 6888 Woodruf f keys / L 12

DIN 6889 Gib-head saddle keys / M 12

DIN 6900 Screw and washer assemblies / N 1

DIN 6901 Tapping screw assemblies, type C / K 4

DIN 6901 Tapping screw assemblies, type F / L 4

DIN 6902 Washers for screw assemblies / B 9

DIN 6903 Washers for tapping screw assemblies / B 9

DIN 6904 Curved spring washers for screw assemblies / H 9

DIN 6905 Spring washers for screw assemblies / G 9

DIN 6906 Toothed washer for screw assemblies, type A / V 9

DIN 6906 Toothed washer for screw assemblies, type V / W 9

DIN 6907 Serrated lock washers for screw assemblies / Y 9

DIN 6908 Conical spring washers for screw assemblies / R 9DIN 6911 Hexagon socket keys / A 11

DIN 6912 Low head hexagon socket cap screws, with key guide / W 2

DIN 6913 Spring washers with safety ring / A 10

DIN 6914 Hexagon screws with large wrench size / G 2

DIN 6915 Hexagon nuts with large wrench size / O 6

DIN 6916 Washers, round / E 9

DIN 6917 Square taper washers for T-sections / K 9

DIN 6918 Square taper washers for U-sections / K 9

DIN 6921 Hexagon nuts with flange / M 2

DIN 6923 Hexagon nuts with flange / N 7

DIN 6924 Hexagon nuts / Z 6

DIN 6925 Hexagon nuts / Z 6

DIN 6926 Hexagon nuts with flange and plastic ring / O 7

DIN 6927 Prevailing torque hexagon nuts with flange, all metal / O 7

ISO 7045 Cross recessed button head screws / A 2

ISO 7046 Cross recessed countersunk head screws / L 1

ISO 7047 Cross recessed raised countersunk head screws / M 1

ISO 7049 Cross recessed tapping button head screws / N 4

ISO 7050 Cross recessed countersunk head tapping screws / O 4

ISO 7051 Cross recessed raised countersunk head tapping screws / P 4

ISO 7089 Washers, 200 HV and 300 HV / C 9

ISO 7090 Washers, round / E 9

ISO 7091 Washers for clamping devices / C 9


ISO 7093 Washers, 200 HV / D 9

ISO 7094 Square washers, type V / C 9 / M 9

DIN 7331 Hollow rivets, two piece, type A / N 10

DIN 7331 Hollow rivets, two piece, type B / O 10

DIN 7 337 RIVQUICK ® blind rivet, type A and B / P 10

DIN 7338 Rivets for brake and clutch linings / R 10 / S 10 / T 10

DIN 7339 Hollow rivets, one piece / U 10

DIN 7340 Tubular rivets with rolled round head, type B / W 10

DIN 7340 Tubular rivets with flat head, type A / V 10

DIN 7341 Rivet pins, type A / X 10


17/2017

Overview DIN/ISO/B/TYP From 1 to 635005 · For drawings laid out according to co-ordinates see pages 18 /19 (e.g. Taper pins = E 11)

DIN 7341 Rivet pins, type B / Y 10

DIN 7343 Spiral pins, medium duty / A 12

DIN 7344 Spiral pins, heavy duty / B 12

DIN 7346 Spring pins (spring sleeves), light duty / C 12

DIN 7349 Washers for screws with spring pins / B 9

ISO 7380 Button head socket screws / Z 2

LFS Flanged button head screws / A 3


ISO 7434 Slotted set screws with cone point / P 5ISO 7435 Slotted set screws with dog point / L 5

ISO 7436 Slotted set screws with cup point / N 5

DIN 7500 Screws, thread rolling / O 1 / P 1 / R 1

DIN 7504 Self-dril ling screws / S 1 / T 1

B 7505 Cross recessed pressboard screws with countersunk head / F 5

B 7505 Cross recessed pressboard screws with round head / G 5

B 7505 Cross recessed pressboard screws with raised countersunk

head / G 5

B 7510 Cross recessed pressboard screws with countersunk head / F 5

B 7510 Cross recessed pressboard screws with round head / G 5

B 7510 Cross recessed pressboard screws with raised countersunk

head / G 5

DIN 7513 Thread forming screws, type A / U 1

DIN 7513 Thread forming screws, type B / V 1

DIN 7513 Thread forming screws, type F and G / W 1

DIN 7516 Cross recessed thread forming screws, type A / X 1

DIN 7516 Cross recessed thread forming screws, type D / Y 1

DIN 7516 Cross recessed thread forming screws, type E / Z 1

DIN 7604 Pipe p lugs / A 13

DIN 7964 Hexagon head screws with reduced shank / G 2

DIN 7965 Screwed inserts (screw plugs) / S 7

DIN 7967 Safety nuts / T 7

DIN 7968 Hexagon fit bolts (for steel structures) / F 2

DIN 7969 Slotted countersunk head bolts / C 4

DIN 7976 Hexagon head tapping screws / M 4DIN 7977 Taper pins with thread and constant threaded part / I 11

DIN 7978 Taper pins with internal thread / D 12

DIN 7979 Parallel pins with internal thread / E 12

DIN 7980 Spring washers for cheese head screws / F 9

DIN 7981 Cross recessed tapping button head screws / N 4

DIN 7982 Cross recessed countersunk head tapping screws / O 4

DIN 7983 Cross recessed raised countersunk head tapping screws / P 4

DIN 7984 Hexagon socket low head cap screws / X 2

DIN 7985 Cross recessed pan head screws / M 2

DIN 7989 Washers for steel constructions / D 9

DIN 7990 Hexagon head bolts for steel construction / H 2

DIN 7991 Hexagon socket countersunk head screws / Y 2

DIN 7992 T-head bolts with large head / C 3

DIN 7993 Round wire snap rings / U 12

DIN 7995 Cross recessed raised countersunk head wood screws / C 5

DIN 7996 Cross recessed round head wood screws / D 5

DIN 7997 Cross recessed countersunk head woodscrews / E 5

DIN 8140 HELICOIL® plus, threaded inserts for metals / E 13

ISO 8673 Hexagon nuts / O 6

ISO 8675 Hexagon thin nuts / H 6

ISO 8676 Hexagon head screws, fully threaded, fine thread / C 2

ISO 8677 Mushroom head square neck bolts / R 3

ISO 8733 Parallel pins with internal thread / E 12

ISO 8734 Parallel pins, hardened / Z 11

ISO 8735 Parallel pins with internal thread / E 12

ISO 8736 Taper pins with internal thread / D 12

ISO 8737 Taper pins with threaded ends / I 11


ISO 8739 Grooved pins with pilot / P 11

ISO 8740 Parallel grooved pins / T 11

ISO 8741 Reverse grooved pins / U 11

ISO 8742 Centre grooved pins / V 11

ISO 8744 Taper grooved pins / R 11

ISO 8745 Grooved pins / S 11

ISO 8746 Round head grooved pins / W 11

ISO 8748 Spiral pins, heavy duty / B 12

ISO 8750 Spiral pins, medium duty / A 12

ISO 8751 Spiral pins, light duty / A 12

ISO 8752 Slotted spring pins / Y 11

ISO 8765 Hexagon head bolts, fine thread / G 2

DIN 8838 Nuts for milling machine arbours / U 7

DIN 8839 Differential nuts / V 7

DIN 9021 Washers with large external diameter / D 9

B 9022 Mudgua rd was her / D 9

D IN 9045 Snap ri ngs / U 12

10001 – 635005ISO 10510 Tapping screw assemblies, type F / L 4

ISO 10642 Hexagon socket countersunk head screws / Y 2



DIN 11014 Countersunk head bolt with 2 flat nibs / D 4

DIN 11024 Spring cotters / H 11

ISO 13337 Spring pins (spring sleeves), light duty / C 12

ISO 14583 Hexolobular socket pan head screws / O 2

DIN 15237 Seating bolts / E 4

ISO 15480 Screws, thread rolling / R 1

ISO 15481 Screws, thread rolling / P 1

ISO 15482 Screws, thread rolling / O 1

DIN 16903 Threaded bushes for plastics / W 7

DIN 21346 Square head track bolts / K 3

DIN 21547 Round head screws with oval shoulder / Y 3

DIN 22424 Triangular flange bolts / F 4

DIN 22425 Triangular flange nuts / X 7

DIN 25192 T-head bolts for rail vehicles / C 3

DIN 25193 Anchor screw for rail vehicles / G 4

DIN 25195 Countersunk bolts with double nip for rail vehicles / D 4

DIN 28129 Lifting nuts / Y 7

D IN 30387 Shouldered nuts, metric fine thread and trapezoidal thread / K 7

DIN 30389 Hexagon and castellated nuts with round thread / Z 7

DIN 34800 Flanged bolts with hexalobular head / N 2

Type 47141 MEPLAG®, hexagon head screws with collar / S 14

Type 47142 MEPLAG®, hexagon head screws with collar and slot / T 14

Type 47621 MEPLAG®, wing screws / L 14



Type 47661 MEPLAG®, cross head screws / U 14

Type 47662 MEPLAG®, cross head screws / V 14

Type 47741 MEPLAG®, coarse knurled thumb screws / N 14



Type 47751 MEPLAG®, fine knurled thumb screws / P 14



Type 47761 MEPLAG®, star head screws / W 14

Type 47762 MEPLAG®, star head screws / X 14

Type 48621 MEPLAG®, wing nuts / M 14

Type 48622 MEPLAG®, wing nuts / M 14

Type 48623 MEPLAG®, wing nuts / M 14 Type 48661 MEPLAG®, cross head nut / Y 14

Type 48741 MEPLAG®, coarse knurled thumb nuts / O 14



Type 48751 MEPLAG®, fine knurled thumb nuts / R 14



Type 48762 MEPLAG®, star grip nuts / Z 14

B 50400 Spacer collars, round / I 8

B 50500 Hexagon socket security screw with raised countersunk head

with full dog point / B 3

B 50502 Socket screw wrenches for B 50500 / B 11

B 51001 Façade construction screws, type C, with captive neoprene

sealing washer / R 4

B 51002 Façade construction screws, type F, with captive neoprene

sealing washer / S 4

B 51003 Façade construction screws, type C, with captive neoprene

sealing washer / R 4

B 51004 Façade construction screws, type F, with captive neoprene

sealing washer / S 4

B 51010 Insert nut, case hardened / K 8

B 51011 Sheet metal nuts (place nut) / L 8

B 51012 Cage nuts / M 8

B 51020 Screwdr iver / Bi ts / C 11

B 51021 Screwdr iver / Bi ts / C 11B 51022 Screwdr iver / Bi ts / C 11

B 52004 Screws for plastics, button head, cross recess Z, AMTEC® / H 5

B 52005 Screws for plastics, countersunk head, cross recess Z,

AMTEC® / I 5

B 52006 Button head screws with pressed-on washer, AMTEC® / K 5

B 52010 Window building screws, countersunk head, double cutting

edge, double-start thread, cross recess H / T 4

B 52011 Window building screws, countersunk head, spiral tip,

double-start thread, cross recess H / T 4

B 52012 Window building screws, countersunk head, double cutting

edge, Hi-lo-thread, cross recess H / T 4

B 52013 Window building screws, countersunk head, drill tip, tapping

screw thread, cross recess H / U 4

B 52014 Window building screws, countersunk head, drill tip, metric

thread, cross recess H / V 4

B 52020 Dry-wall screws with coarse thread, bugle head, cross recess

H / W 4

B 52021 Dry-wall screws with tapping screw thread, bugle head, drill tip,

cross recess H / X 4

B 53001 Hexagon nuts, based on DIN 934, self-locking, all metal,

formed / N 8

B 53002 Hexagon nuts, based on DIN 934, self-locking, all metal, formed,

can be screwed from both sides / O 8 B 53010 Washer nuts

with captive, turning washers, self-locking, formed / P 8

B 53011 Washer nuts with captive, turning washers, self-locking,

formed / R 8

B 53012 Lock nut with f lange and toothing / E 8

B 53020 Hexagon nuts, self-locking, all metal / T 8

B 53021 Flanged nuts, self-locking, all metal / T 8

B 53030 Fujilok self-locking nuts / U 8

B 53040 Vargal self-locking nuts, spring made from phosphatised spring

steel / V 8

B 53050 Self-locking nut, fine U-Nut, safety device, stainless steel

(1.0503) / W 8

B 53051 Self-locking nut, fine U-Nut, safety device, stainless steel

(1.7220) / W 8

B 53060 Sha ft l ock / B 10

B 53070 Locking washers S / C 10

B 53072 Spring-locking washers (contact washers) / D 10

B 53074 NORD-LOCK ® locking washers / E 10

B 53080 Verbus - Plus self-locking screws / T 2

B 53081 Coatings - Plas-Bol t / S 2

B 53082 Coatings - Precote 30 / T 2

B 53083 Coatings - Precote 80 / T 2

B 53084 Coatings - 3M, Scotch Grip 2353 / T 2

B 53085 Hexagonal self-locking screws with flange and toothing / P 2

B 53088 Precote 85 coat ings / T 2

DIN 58520 Screws for drawing instruments / H 4

DIN 58521 Knurled nuts for drawing instruments / I 6DIN 58530 Adjusting screws for drawing instruments / V 3

DIN 58531 Clamping screws for drawing instruments / H 3

B 65020 Cross recess screw assembly (furniture handle screw) with

pressed washer / B 2

B 65080 Dri ve -i n nuts / X 8

B 66000 SEAL LOCK ®, Sealing nuts / Y 8

B 67000 HELICOIL®, lock nuts / Z 8

B 70100 RIVKLE® Blind rivet nuts, flat head, round body, open and

closed, steel / I 13


closed, A2 / I 13


closed, alu. alloy / I 13

B 70200 RIVKLE® Blind rivet nuts, countersunk head, round body, open

and closed, steel / K 13


and closed, A2 / K 13


and closed, alu. alloy / K 13

B 70300 RIVKLE® Blind rivet nuts, flat head, round body, knurled in

clamp area, open and closed, steel / I 13

B 70400 RIVKLE® Blind rivet nuts, countersunk head, round body,

knurled in clamp area, open and closed, steel / K 13

B 70500 RIVKLE® Blind rivet nuts, flat head, hexagonal body, open and

closed, steel / L 13B 70501 RIVKLE® Blind rivet nuts, flat head, hexagonal body, open and

closed, A2 / L 13

DIN 70808 Rivet nuts for automobile manufacture / A 8

DIN 70851 Groove nuts for automobile manufacture / A 7

DIN 70852 Groove nuts for automobile manufacture / A 7

DIN 70952 Lock washers for automobile manufacture / T 9

B 71100 RIVKLE® Blind rivet nuts, with extra small countersunk head,

round body, open, steel / M 13


round body, open, A2 / M 13


hexagonal body, open, steel / N 13


part hexagonal shank, open, steel / N 13


part hexagonal shank, open, A2 / N 13

B 72100 RIVKLE® Blind rivet studs, flat head, round body, knurled in

clamping area, steel / O 13

DIN 74361 Wheel fixing nuts for automobile manufacture / B 8DIN 80701 Butterfly nuts for ship construction / C 8

DIN 80704 Bow nuts for ship construction / D 8

DIN 80705 Flat nuts for ship construction / G 6

B 81400 QUICKLOC®, Series 140, pressure fasteners / R 13

B 81500 QUICKLOC®, Series 200, quarter-turn fasteners / S 13

B 81800 QUICKLOC®, Series 1000, quarter-turn fasteners / T 13

B 81900 Quick-release fasteners, special / U 13

B 610004 HELICOIL® plus free running, threaded inserts for metals / E 13

B 610005 HELICOIL® Tangless free running, threaded inserts for metals /

F 13

B 620004 HELICOIL® plus SCREWLOCK ®, threaded inserts for metals /

E 13

B 620005 HELICOIL® Tangless SCREWLOCK ®, threaded inserts for

metals / F 13



F 13



F 13



F 13

(Technical changes reserved)

DIN – ISO Comparison1 23397 233884 120785 158094 1234125 7089125 7090126 7091417 7435427 2342433 7092438 7436439 4035439 8675440 7094551 4766553 7434558 4018580 3266601 4016603 8677660 1051661 1051911 2936912 4762913 4026914 4027915 4028

916 4029931 4014933 4017934 4032934 8673937 7038960 8765961 8676963 2009964 2010965 7046966 7047980 7042980 105131433 23401434 23411435 23411436 23411440 87381443 23401444 23411470 87391471 87441472 87451473 87401474 87411475 87421476 8746

1477 87471481 87526325 87346901 105106902 106736914 74126915 74146916 74166924 70406925 70427343 87507343 87517344 87487346 133377500 154807500 154817500 154827976 14797977 87377978 87367979 87337979 87357981 70497982 70507983 70517985 70457991 106429021 7093


18/2018

Overview of Drawings

Type 743, 744 Type 230, 231, 232 Type 235 Type 831, 832, 833 Type 835, 837 Type 1433, 1434

1437, 14 38 Type 173 Type 0417 Type 1 63 Type 193 2, 1942 Type 193 2, 1942 Type 47621, 47622,

47623 Type 48621, 48622,

48623

DIN 7604 DIN 442 DIN 443 DIN 470

DIN 8140, B 610004,633004, 633014,635004 /620004

B 610005, 633005,633015, 635005 /

B 620005 Type 1030, 1031,

1032, 1033 Type 1040, 1041B 70100, 70101,

70102, 70300B 70200, 70201,

70202, 70400 B 70500, 70501 B 71100, 71101

1

2

3

4

5

6

7

8

9

10

11

12

13

14

A B C D E F G H I K L M

DIN 84ISO 1207

DIN 85ISO 1580 DIN 404 DIN 920 DIN 921 DIN 922 DIN 923

DIN 924

DIN 925DIN 963ISO 2009

DIN 964ISO 2010

DIN 965ISO 7046

DIN 966ISO 7047

DIN 7985ISO 7045 B 65020

DIN 558, 933, 961ISO 4017, 4018,

8676 DIN 561 DIN 564DIN 609, 610*,

7968

DIN 601, 931, 960,6914, ISO 4014,

4016, 7412, 8765 DIN 7990, DIN 7964 DIN 6900 DIN 6900DIN 6921EN 1665

LFS B 50500DIN 186, 7992,

261, 25192 DIN 188 DIN 316 B 316 DIN 444 DIN 464, 58531 DIN 478 DIN 479, 21346 DIN 480 DIN 525

DIN 6367 DIN 6378 DIN 7969 DIN 11014, 25195 DIN 15237 DIN 22424 DIN 25193 DIN 58520 DIN 5914 DIN 6901DIN 6901ISO 10510

DIN 7976ISO 1479

DIN 97

DIN 571

B 571 DIN 7995 DIN 7996 DIN 7997 B 7505, 7510 B 7505, 7510 B 52004 B 52005 B 52006DIN 417ISO 7435

DIN 427ISO 2342

DIN 2509 DIN 2510 DIN 2510 DIN 6332 DIN 315 B 315 DIN 431, 80705DIN 439, 936*,ISO 4035, 8675 DIN 466, 58521 DIN 467, 6303 DIN 546 DIN 547

DIN 981, 1804,70851, 70852 DIN 986 DIN 987 DIN 1478 DIN 1479 DIN 1480 DIN 1587 DIN 1816 DIN 2082 DIN 2510, 30387 DIN 2510 DIN 6305, 6307

DIN 70808 DIN 74361 DIN 80701 DIN 80704B 193 B196

B 53012 B 317 B 318 B 466 B 467 B 50400 B 51010 B 51011 B 51012

DIN 93*

DIN 125, 126, 433,440, 988, 1440, 1441,

6902, 6903, 7349

DIN 6340ISO 7089, 7091, 7092,

7094, 8738, 10669, 10673

DIN 7989, 9021,ISO 7093

B 1052, 9022DIN 125, 6916

ISO 7090 DIN 127*, 7980* DIN 128*, 6905* DIN 137*, 6904* DIN 432DIN 434, 435,6917, 6918 DIN 436

DIN 440ISO 7094

DIN 6913* B 53060 B 53070 B 53072 B 53074 DIN 124, 660 DIN 302, 661 DIN 662 DIN 674 DIN 675 DIN 6791 DIN 6792

DIN 6911 B 50502 B 51020, 51021 B 51022 DIN 1, ISO 2339 DIN 7, ISO 2338DIN 94

ISO 1234 DIN 11024DIN 258, 7977,

ISO 8737DIN 1433, 1443

ISO 2340DIN 1434, 1435

ISO 2341DIN 1436, 1444,

ISO 2341

DIN 7343ISO 8750, 8751

DIN 7344ISO 8748

DIN 7346ISO 13337

DIN 7978ISO 8736

DIN 7979ISO 8733, 8735 DIN 6881 DIN 6883, 6886 DIN 6884, 6887 DIN 6885 DIN 6886 DIN 6888 DIN 6889

L

L

*Note: Standard has been withdrawn


19/2019

DIN 6900DIN 7500ISO 15482

DIN 7500ISO 15481

DIN 7500ISO 15480 DIN 7504 DIN 7504 DIN 7513 DIN 7513 DIN 7513 DIN 7516 DIN 7516 DIN 7516

1

2

3

4

5

6

7

8

9

10

11

12

13

14

N O P R S T U V W X Y Z

DIN 34800 ISO 14583

B 151, 53085

B 158 B 251 B 53081

B 53080, 53082,53083, 53084,

53088DIN 912ISO 4762 DIN 4626 DIN 6912 DIN 7984

DIN 7991ISO 10642 ISO 7380

DIN 529 DIN 580 B 581DIN 603ISO 8677 DIN 604 DIN 605, 608 DIN 607 DIN 653, 58530 DIN 787 DIN 5903 DIN 5903, 21547 DIN 6304, 6306

DIN 7981ISO 7049

DIN 7982ISO 7050

DIN 7983ISO 7051 B 51001, 51003 B 51002, 51004

B 52010, 52011,52012 B 52013 B 52014 B 52020 B 52021 DIN 95 DIN 96

DIN 438ISO 7436

DIN 551ISO 4766

DIN 553ISO 7434 DIN 797

DIN 835, 938, 939,940

DIN 913ISO 4026

DIN 914ISO 4027

DIN 915ISO 4028

DIN 916ISO 4029 DIN 926 DIN 927 DIN 976

DIN 548DIN 934, 6915,ISO 4032, 8673 DIN 557 DIN 562 DIN 582 DIN 798 DIN 917 DIN 928 DIN 929 DIN 935 DIN 979

DIN 980, 982, 985,6924, 6925

N 6923, 6331 DIN 6926, 6927 DIN 6330 DIN 6334 DIN 7965 DIN 7967* DIN 8838 DIN 8839 DIN 16903 DIN 22425 DIN 28129 DIN 30389

B 53001 B 53002 B 53010 B 53011 B 53020 B 53021 B 53030 B 53040 B 53050, 53051 B 65080 B 66000 B 67000

DIN 462 DIN 463* DIN 526*DIN 2093, 6796,

6908 DIN 6319 DIN 5406, 70952 DIN 6797* DIN 6797*, 6906 DIN 6797*, 6906 DIN 6798* DIN 6798*, 6907* DIN 6798*

DIN 7331 DIN 7331 DIN 7337 DIN 7338 DIN 7338 DIN 7338 DIN 7339 DIN 7340 DIN 7340 DIN 7341 DIN 7341 DIN 911*

DIN 1445 DIN 1469DIN 1470ISO 8739

DIN 1471ISO 8744

DIN 1472ISO 8745

DIN 1473ISO 8740

DIN 1474ISO 8741

DIN 1475ISO 8742

DIN 1476ISO 8746

DIN 1477ISO 8747

DIN 1481ISO 8752

DIN 6325ISO 8734

DIN 705* DIN 471 DIN 472 DIN 983 DIN 984 DIN 6799 DIN 7993, 9045* DIN 906 DIN 907 DIN 908 DIN 910 DIN 5586

1200, 71300,71301 B 72100 Type 6683 B 81400 B 81500 B 81800

B 81900different Types Type 1230, 1240 Type 937 Type 931, 932 Type 940, 941 Type 730, 733, 734

ype 47741,742, 47743

Type 48741,48742, 48743

Type 47751,48752, 47753

Type 48751,48752, 48753 Type 47141 Type 47142 Type 47661 Type 47662 Type 47761 Type 47762 Type 48661 Type 48762


20/20

Subject to technical change.

Reprinting, even in extract form, only permitted with express consent.

Observe protective note according to DIN 34.

Böllhoff GmbH

Archimedesstraße 1–4 · 33649 Bielefeld · Germany

Phone +49 (0)521/ 4482-03 · Fax +49 (0)521 /4482- 93629

www.boellhoff.com · [email protected]

Böllhoff GmbHRandlstraße 7 · A-4061 Pasching bei Linz · Austria

Phone +43 (0) 7229/ 69169 · Fax +43 (0) 7229/ 73344

www.boellhoff.com · [email protected]

Böllhoff International with companies in:

Argentina

Austria

Brazil

Canada

China

Czech Republic

France

Germany

Hungary

India

Italy

Japan

Mexico

Poland

Romania

Russia

Slovakia

South Africa

Spain

Turkey

United Kingdom

USA

Apart from these 22 countries, Böllhoff supports its international

customers in other important industrial markets in close partnership

with agents and dealers.

Documents

Asamblari Filetate (Catalog BOLLHOFF)