8/9/2019 Applied Motion Products STM Series Press Release

http://slidepdf.com/reader/full/applied-motion-products-stm-series-press-release 1/2

  — FOR IMMEDIATE RELEASE —

New Integrated Motor Shipped From Stock

Watsonville, CA – Applied Motion Products' STM is a stepper drive and motor unit fused into asingle device that offers significant savings on space, wiring and cost when compared withconventional motor and drive solutions.

Powerful features such as advanced current control, anti-resonance technology, torque ripplesmoothing and microstep emulation allow the STM to deliver optimized stepper performance idealfor medical, packaging, semiconductor and a wide variety of other automation applications. STMdrive+motor units come standard with protection against over and under voltage, over-temp,motor shorts and motor open phase. They are RoHS compliant and CE certified.The STM is available in lengths of 92.4 mm with an output torque of up to 125 oz-in, or 114.4 mmwith an output torque of up to 245 oz-in. They provide three digital inputs, one digital output andone analog output. Users can choose from an RS232 or RS485 communication interface and anoptional 1000 line encoder that is integrated to the motor body without increasing the size of the

unit. The optional encoder provides stall detect and stall preventionfunctionality.

Two versions with different control options are available; the S versionwith step and direction input, and the programmable Q version. TheSTM-S is quickly and easily configured with graphical, intuitiveCONFIGURATOR software. The STM-S can be configured from adrop-down menu, or the user can quickly create custom motor configurations if desired. The STM-Q is well suited for more complexmotion. It provides stand-alone operation and is quickly programmedwith the robust Q programming environment, which delivers a number of benefits including register manipulation, conditional processing, mathfunctions, multi-tasking and “generic” HMI compatibility.

Self-Test and Auto Setup features measure and configure motor parametersautomatically, while Electronic Damping (anti-resonance) technology eliminatesmidrange instability for higher motor speeds and fuller use of available torque.Command Signal Smoothing reduces extraneous system resonances for smoother motor performance and reduced wear on mechanical components. Torque Ripple Smoothing adjusts thecurrent waveform to reduce low speed torque ripple for smooth motion at low motor speeds.Additionally, MicroStep Emulation provides smooth motion for systems that require low stepresolutions, such as retrofit systems with controller resolution that is fixed at a low value andcannot easily be changed.

More information on the ST Series Products can be viewed at-

http://www.electromate.com/products/series.php?&series_id=103357

A copy of this Press Release can be viewed at-

http://www.electromate.com/news/?c=pressreleases&press_id=10403

For more information, please contact:

Electromate Industrial Sales Ltd.

4300 Steeles Ave West, Unit #39

Woodbridge, ON L4L 4C2

www.electromate.com

EDITORIAL CONTACT:

Mr. Warren Osak,

sales@electromate.comPhone: 905-850-7447

Toll Free Ph: 877-737-8698

Fax: 905-850-7451

Toll Free Fax: 877-737-8699

8/9/2019 Applied Motion Products STM Series Press Release

http://slidepdf.com/reader/full/applied-motion-products-stm-series-press-release 2/2