AMS Project Specifications: AMS Trackside Design Guideline AMS Project Specifications: AMS Trackside

  • View
    31

  • Download
    0

Embed Size (px)

Text of AMS Project Specifications: AMS Trackside Design Guideline AMS Project Specifications: AMS Trackside

  • Reference material

    AMS Project Specifications: AMS Trackside Design Guideline

    This document is published as reference material to support the implementation of Automatic Train Protection as part of the roll out of the Advanced Train Control Migration System project.

    The content described might be of assistance to individuals and organisations performing work on NSW Rail Assets.

    When reading this document, any inconsistencies with Transport for NSW Network Standards shall be raised with the Asset Standards Authority (ASA) for clarification.

    This document does not comply with accessibility requirements (WCAG 2.0). If you are having trouble accessing information in these documents, please contact the ASA.

    Authorised by: Chief Engineer, Asset Standards Authority Published: November 2018

    Important message

    This document is developed solely and specifically for use on the rail network owned or managed by the NSW Government and its agencies. It is not suitable for any other purpose. You must not use or adapt it or rely upon it in any way unless you are authorised in writing to do so by a relevant NSW Government agency.

    If this document forms part of a contract with, or is a condition of approval by, a NSW Government agency, use of the document is subject to the terms of the contract or approval.

    This document is published for information only and its content may not be current.

    mailto:standards@transport.nsw.gov.au

  • AMS PROJECT SPECIFICATIONS: AMS TRACKSIDE DESIGN

    GUIDELINE

    DeskSite Reference: 5188811

    Principle – Applicable to Transport Projects AMS Program

    Quality Management System

    Status: Draft

    Version: V3.0

    Branch: Infrastructure and Services

    Business unit: ATP Program

    Date of issue: 08/03/2018

    Review date: 08/03/2018

    Audience: AMS Project Specific Document

    Asset classes: Heavy Rail; Light Rail; Multi Sites;

    Systems; Fleets

    Project type: Major

    Project lifecycle:

    Feasibility; Scoping; Definition;

    Construction readiness; Implementation;

    Finalisation; Not applicable

    Process owner: Project Director

    R ef

    er en

    ce m

    at er

    ia l o

    nl y

  • AMS PROJECT SPECIFICATIONS: AMS TRACKSIDE DESIGN GUIDELINE

    Infrastructure and Services : ATP Program

    Project type: Major NSW

    Transport for NSW

    Document Approval:

    Authored by:

    Colin Oxborrow

    Signal Design Engineer .,,Z(•11-•-------R-- Date: 9

    Reviewed by:

    Adam Bird

    AMS Design Engineer Trackside _

    Digitally signed by Adam J Bird Date: 2018.03.13 07:47:38

    Date:

    Reviewed by:

    Anthony Samaan

    Manager Safety Assurance

    , /

    '------- -- ,

    • f I;13 • 2 CIF _

    Date:

    Reviewed by:

    Andre Younes

    Manager Operational Integration

    VA: 173- ) tg q

    (31 Date:

    Reviewed and Accepted by:

    Frederic Tricoche

    Principal Engineering Manager Systems

    C e•

    Oka-ILI 1 -I 1

    Date:

    Approved for Release by:

    Geoff Webb

    ATP Project Director Date:

    QUALITY MANAGEMENT SYSTEM Desksite Reference: 5188811_14

    TfNSW 2017 UNCONTROLLED WHEN PRINTED Page 2 of 29

    14/03/18

    R ef

    er en

    ce m

    at er

    ia l o

    nl y

  • AMS PROJECT SPECIFICATIONS: AMS TRACKSIDE DESIGN GUIDELINE

    Infrastructure and Services : ATP Program

    Project type: Major

    QUALITY MANAGEMENT SYSTEM

    Desksite Reference: 5188811_14

    © TfNSW 2017 UNCONTROLLED WHEN PRINTED Page 3 of 29

    Document History

    Version Date of Issue Author Summary of change

    0.1 13/05/2016 L. Williams Initial draft

    0.2 18/07/2016 L. Williams Update to stakeholder comments

    0.3 20/07/2016 L. Williams Development of ETCS tables, draft released for

    GSFT/SIT tender.

    0.4 06/09/2016 L. Williams Update to review comments

    0.5 21/09/2016 L. Williams Update to final review comments

    1.0 22/09/2016 L. Williams Issued

    1.1 08/02/2017 J. Paw Update to include latest ETCS Balise and LEU

    Table Template (CR-406)

    1.2 20/03/2017 S. S. De

    Update to CR376 (CI436), CR406 (CI432), CR481

    (CI578) , CR482 (CI537), CR554 and CR571

    (CI599)

    1.3 12/05/2017 S. S. De Updated CR574, CR626, CR628 and CR652

    2.0 12/05/2017 S. S. De Issued for Approval

    2.1 08/03/2018 C. Oxborrow Update to latest ETCS Balise and LEU Table

    Template

    3.0 08/03/2018 C. Oxborrow Issued for Approval

    R ef

    er en

    ce m

    at er

    ia l o

    nl y

  • AMS PROJECT SPECIFICATIONS: AMS TRACKSIDE DESIGN GUIDELINE

    Infrastructure and Services : ATP Program

    Project type: Major

    QUALITY MANAGEMENT SYSTEM

    Desksite Reference: 5188811_14

    © TfNSW 2017 UNCONTROLLED WHEN PRINTED Page 4 of 29

    Foreword

    This guideline forms a part of the AMS Project Specifications which detail the requirements for the

    implementation of ATP / AMS on the TfNSW heavy rail network. This guideline specifically covers the ETCS

    Level 1 System using Limited Supervision.

    To gain a complete overview of ATP / AMS signalling design requirements, this document should be read in

    conjunction with the AMS suite of signalling design principle and guideline modules.

    Note

    The following guideline is to be used by AEO’s engaged by the ATP program for the ATP / AMS detailed design implementation. This is to ensure that a

    consistent methodology is applied.

    It has been produced during the development of the AMS Project Specifications and subsequent further updates may be required as the specifications evolve.

    It is an interim document until the ASA guideline is published.

    R ef

    er en

    ce m

    at er

    ia l o

    nl y

  • AMS PROJECT SPECIFICATIONS: AMS TRACKSIDE DESIGN GUIDELINE

    Infrastructure and Services : ATP Program

    Project type: Major

    QUALITY MANAGEMENT SYSTEM

    Desksite Reference: 5188811_14

    © TfNSW 2017 UNCONTROLLED WHEN PRINTED Page 5 of 29

    Table of contents

    1. Introduction _______________________________________________________________ 7

    2. Purpose __________________________________________________________________ 8

    3. Terms and definitions ______________________________________________________ 9

    4. Reference documents_____________________________________________________ 11

    5. Design Process __________________________________________________________ 12

    5.1. Overview ___________________________________________________________________ 12

    6. System Requirements ____________________________________________________ 13

    6.1. AMS System Requirements Specification _____________________________________ 13

    6.2. AMS Trackside Sub-System Requirements ____________________________________ 13

    7. System Definition_________________________________________________________ 14

    7.1. AMS Signal Design Principles ________________________________________________ 14

    7.2. AMS Standards and Guidelines _______________________________________________ 14

    7.3. Trackside System Architecture Definition _____________________________________ 14

    7.3.1. Signalling Interface Description ______________________________________________________ 15 7.3.2. Project Technical Description _______________________________________________________ 16 7.3.3. Power Supply Arrangement Description ______________________________________________ 16 7.3.4. Network Architecture Description ____________________________________________________ 16

    7.4. Encoder Standard Configuration Definition ____________________________________ 16

    7.5. ASA Standards ______________________________________________________________ 16

    8. Concept Design __________________________________________________________ 17

    8.1. Signalling Functional Specification (SFS) _____________________________________ 17

    8.1.1. Design Inputs _____________________________________________________________________ 18 8.1.2. Design Outputs ____________________________________________________________________ 19

    9. Detailed Design __________________________________________________________ 20

    9.1. Signalling Plan Design for AMS _______________________________________________ 20

    9.1.1. ATP Symbols _____________________________________________________________________ 20 9.1.2. Balise and Balise Group Naming ____________________________________________________ 21 9.1.3. Design Inputs _____________________________________________________________________ 22 9.1.4. Design Outputs ____________________________________________________________________ 22

    9.2. ETCS Balise and LEU Tables _________________________________________________ 22

    9.2.1. ETCS Balise and LEU Tables Cover and Control Sheets _______________________________ 23

    R ef

    er en

    ce m

    at er

    ia l o

    nl y

  • AMS PROJECT SPECIFICATIONS: AMS TRACKSIDE DESIGN GUIDELINE

    Infrastruc

Related documents