Ambient Vaporizers
53 Ayer Road, Littleton, MA, USA 01460 Tel: 508-887-7100 Fax:
978-742-4908 Email: [email protected] www.fibatech.comQUALITY
PRODUCTS-SERVICE
When delivering your cryogenic products, FIBA's Finnco
vaporizers provide you the safety, economy and efficiency you
expect!
Designed to function with cryogenic tanks,
FIBA's Finnco line of high and low-pres-
sure vaporizers is the perfect fit for opera-
tions requiring the conversion of cryogenic
liquids to gas. We offer a full range of
models with, but not limited to, over
20 different sizes to suit your various
needs as well as custom applications.
Our vaporizers are manufactured in Louis-
ville, Kentucky and designed with economy
and efficiency in mind. Our low-pressure,
ambient, cryogenic vaporizer line is
designed for a maximum pressure of 600
PSI. Our standard high-pressure line is
built with a stainless steel lining and is de-
signed for a maximum allowable pressure
of 6,000 PSI. Monel lined models are also
available. The pressure-building vaporiz-
ers are designed for a 600 PSI maximum.
• Low & High-Pressure and Pressure-Building Models
• Fins Designed for Maximum Surface Area
• Wide-Gap Design for Superior Air Flow
• Customized Models Available for Special Applications
• Simple Assembly
• No Welding Required
• Expandable, Modular Design
• Stackable with No Crating Required
• Custom Accessories Available
QUALITY PRODUCTS-SERVICE
FIBA Technologies, Inc., 53 Ayer Road, Littleton, MA 01460
U.S.A. • Tel: (508) 887-7100 • www.fibatech.com
STAINLESS STEEL MODELS (High Pressure)
GENERAL SPECIFICATIONS
MODEL NUMBER 10SS-12FH-01 15SS-18FH-01 20SS-24FH-01 25SS-30FH-01
30SS-36FH-01 35SS-42FH-01
Flowrate (SCFH) 9,260 13,800 18,200 23,300 28,500 32,000
Maximum Allowable Pressure
4,500 PSI 4,500 PSI 4,500 PSI 4,500 PSI 4,500 PSI 4,500 PSI
Inlet Connection 1/2" FNPT 1/2" FNPT 1/2" FNPT 1/2" FNPT 1/2"
FNPT 1/2" FNPT
Outlet Connection 1/2" FNPT 1/2" FNPT 1/2" FNPT 1/2" FNPT 1/2"
FNPT 1/2" FNPT
Length 3' 10" 5' 10" 5' 10" 5' 10" 5' 10" 7' 2-15/16"
Width 2' 8-5/8" 2' 8-5/8" 3' 10" 4' 10" 5' 10" 6' 3-1/2"
Height 15' 5-5/8" 15' 5-5/16" 15' 5-5/8" 15' 5-5/8" 15' 5-5/8"
15' 5-5/8"
Nominal Weight (LBS.) 624 880 1120 1325 1570 1692
Anchor Bolt Size 1" 1" 1" 1" 1" 1"
Number of Extrusions 12 18 24 30 36 42
Length of Extrusions 12' 0" 12' 0" 12' 0" 12' 0" 12' 0" 12'
0"
Operating (cold) 1.6 PSI 1.7 PSI 1.8 PSI 2.0 PSI 2.2 PSI 2.4
PSI
Start-up (warm) 2.3 PSI 2.4 PSI 2.5 PSI 2.8 PSI 3.0 PSI 3.2
PSI
ALUMINUM MODELS (Low Pressure)
GENERAL SPECIFICATIONS
MODEL NUMBER .75AL-3F-012AL-
6F-013AL-
6F-015AL-
8F-0110AL-
12F-0115AL-
18F-0220AL-
24F-0225AL-
30F-0230AL-
36F-0235AL-
42F-0240AL-
48F-0250AL-
64F-02
Flowrate (SCFH) 750 2,000 3,200 5,200 10,400 15,500 20,000
25,000 30,000 35,000 40,000 52,000
Maximum Allowable Pressure
600 PSI 600 PSI 600 PSI 600 PSI 500 PSI 500 PSI 500 PSI 500 PSI
500 PSI 500 PSI 500 PSI 500 PSI
Inlet Connection1" MNPT Swagelok
1" MNPT Swagelok
1" MNPT Swagelok
1" MNPT Swagelok
1" MNPT Swagelok
1-1/2" Mueller Flange
1-1/2" Mueller Flange
1-1/2" Mueller Flange
1-1/2" Mueller Flange
1-1/2" Mueller Flange
1-1/2" Mueller Flange
2" Mueller Flange
Outlet Connection1" MNPT Swagelok
1" MNPT Swagelok
1" MNPT Swagelok
1" MNPT Swagelok
1" MNPT Swagelok
1-1/2" Mueller Flange
1-1/2" Mueller Flange
1-1/2" Mueller Flange
1-1/2" Mueller Flange
2" Mueller Flange
2" Mueller Flange
2" Mueller Flange
Length 1' 8-1/8" 2' 8" 2' 8-1/2" 3' 10" 3' 10" 5' 10" 5' 10" 5'
10" 5' 10" 7' 2-15/16" 8' 2-3/8" 8' 2-7/8"
Width 1' 6-3/16" 1' 7-3/4" 1' 8-1/4" 1' 8-1/4" 2' 8-5/8" 2'
8-5/8" 3' 10" 4' 10" 5' 10" 6' 3-1/2" 6' 3-1/2" 8' 3-3/4"
Height 5' 5-1/8" 7' 8-1/8" 10' 1-3/8" 12' 5-7/8" 15' 5-5/8" 15'
5-5/16" 15' 5-5/8" 15' 5-5/8" 15' 5-5/8" 15' 5-5/8" 15' 5-5/8" 15'
6-5/8"
Nominal Weight (LBS.) 43 145 230 325 624 880 1120 1325 1570 1692
1910 3780
Anchor Bolt Size 1/2" 1/2" 1/2" 1/2" 1" 1" 1" 1" 1" 1" 1" 1"
Number of Extrusions 3 6 6 8 12 18 24 30 36 42 48 64
Length of Extrusions 3'6" 6' 0" 8' 0" 10' 0" 12' 0" 12' 0" 12'
0" 12' 0" 12' 0" 12' 0" 12' 0" 12' 0"
Operating (cold) 0.1 PSI 0.3 PSI 0.5 PSI 1.3 PSI 1.6 PSI 1.7 PSI
1.8 PSI 2.0 PSI 2.2 PSI 2.4 PSI 3.4 PSI 3.6 PSI
Start-up (warm) 0.1 PSI 0.5 PSI 0.7 PSI 2.0 PSI 2.3 PSI 2.4 PSI
2.5 PSI 2.8 PSI 3.0 PSI 3.2 PSI 4.7 PSI 4.9 PSI
MONEL MODELS (High Pressure)
GENERAL SPECIFICATIONS
MODEL NUMBER 10MO-12FH-01 15MO-18FH-01 20MO-24FH-01 25MO-30FH-01
30MO-36FH-01 35MO-42FH-01
Flowrate (SCFH) 9,260 13,800 18,200 23,300 28,500 32,000
Maximum Allowable Pressure
4,500 PSI 4,500 PSI 4,500 PSI 4,500 PSI 4,500 PSI 4,500 PSI
Inlet Connection 1/2" FNPT 1/2" FNPT 1/2" FNPT 1/2" FNPT 1/2"
FNPT 1/2" FNPT
Outlet Connection 1/2" FNPT 1/2" FNPT 1/2" FNPT 1/2" FNPT 1/2"
FNPT 1/2" FNPT
Length 3' 10" 5' 10" 5' 10" 5' 10" 5' 10" 7' 2-15/16"
Width 2' 8-5/8" 2' 8-5/8" 3' 10" 4' 10" 5' 10" 6' 3-1/2"
Height 15' 5-5/8" 15' 5-5/16" 15' 5-5/8" 15' 5-5/8" 15' 5-5/8"
15' 5-5/8"
Nominal Weight (LBS.) 624 880 1120 1325 1570 1692
Anchor Bolt Size 1" 1" 1" 1" 1" 1"
Number of Extrusions 12 18 24 30 36 42
Length of Extrusions 12' 0" 12' 0" 12' 0" 12' 0" 12' 0" 12'
0"
Operating (cold) 1.6 PSI 1.7 PSI 1.8 PSI 2.0 PSI 2.2 PSI 2.4
PSI
Start-up (warm) 2.3 PSI 2.4 PSI 2.5 PSI 2.8 PSI 3.0 PSI 3.2
PSI
Ambient Vaporizers Many different sizes to suit your various
needs as well as custom applications.
PRESSURE BUILDING MODELS
GENERAL SPECIFICATIONS
MODEL NUMBER 2 AL-F/24 2 AL-F/36 4 AL-F/24 4 AL-F/60
Cryogenic Vessel Design Size (GALLONS)
1,500 3,000 6,000 9,000-11,000
Maximum Allowable Pressure
600 PSI 600 PSI 600 PSI 600 PSI
Inlet Connection 1" MNPT Swagelok 1" MNPT Swagelok 1" MNPT
Swagelok 1" MNPT Swagelok
Outlet Connection 1" MNPT Swagelok 1" MNPT Swagelok 1" MNPT
Swagelok 1" MNPT Swagelok
Length 36" 48" 36" 72"
Width 20" 20" 44" 44"
Height 8" 8" 8" 8"
Nominal Weight (LBS.) 7 10 14 34
Number of Extrusions 2 2 4 4
Length of Extrusions 24" 36" 24" 60"
QUALITY PRODUCTS-SERVICE FIBA Technologies, Inc., 53 Ayer Road,
Littleton, MA 01460 U.S.A. • Tel: (508) 887-7100 •
www.fibatech.com
The most popular vaporizer accessory is our inexpensive,
Automatic Switching System. The system allows automatic switch-over
from a vaporizer that has become inefficient (due to frost
build-up) to an alternate frost free vaporizer that is ready for
peak performance. By using this, the customer requires fewer
vaporizers, thus reducing cost and space requirements. This system
features two Worcester Controls cryogenic ball valves (Model
C4416PMSE with Series 75 electrical actuator model 1075W). Maximum
flows (consider-ing liquid oxygen at 75 PSI inlet) are: 1”
valve-21.0 GPM and 1-1/2” valve-53.2 GPM. Also featured is a 10” x
12” NEMA-4 electrical control panel with weather-proof enclosure,
one system-ready indicator light, and an adjustable interval timing
relay, with a range from minutes to hours. A low temperature switch
on the downstream gas side of the system is optional.
Specialists in high pressure systems, our engineers employ
state-of-the-art techniques like CAD systems and finite element
analysis (FEA) to develop gas containment equipment and
installation designs, all of which are customized to reflect unique
customer requirements and specifications. FIBA vaporizers are
designed to meet specific seismic zone standards, wind loads and
ice loads, ensuring that each vaporizer is suited to hold up in
almost any environment.
Engineering and Design Capabilities
FIBA vaporizers are manufactured by Finnco at FIBA's Louisville,
Kentucky facility. The company's vaporizer construction affords
simple shipment, storage, installation, and expansion as gas flow
requirements increase with the growth of your business.
Manufactured by Finnco
FIBA-VB-VZ#22016
Serving over 100 countries and all seven continents, FIBA is
certified by various regulatory agencies as the world’s most
experienced gas containment equipment manufacturer. In addition to
providing state-of-the-art service offerings, we manufacture an
extensive line of equipment for the storage and transportation by
road, rail or sea of the following:
– Specialty gases – Industrial gases – Alternative fuels –
Chemicals
Discover a world of difference.
Vaporizer Automatic Switching Systems
