Embed Size (px)
Citation preview
53084B_catalog_Aluminum_02 8/30/07 2:00 PM Page 1
ALUMINUM
EUROPE:
PRIMAPOL METAL SPOTCzech RepublicTel: 420-315-817-111Fax: [email protected]
PRIMASPOT POLSKAPolandTel: 48-32-76-51-600Fax: [email protected]
PRIMASPOT DEUTSCHLANDGermanyTel: 49-89-208039-334Fax: [email protected]
GILINOXRomaniaTel: 40-318-700-800Fax: [email protected]
MAIN OFFICE & WAREHOUSES - ISRAELTEL. 972-8-8631000FAX. [email protected]
SCOPE METALS GROUP
USA:
HADCO METAL TRADING - NYTel: 800-221-0344Fax: [email protected]
HADCO METAL TRADING - PATel: 800-638-2521Fax: [email protected]
MATERIALS TECHNOLOGYSOLUTIONS - NJTel: 973-401-0711Fax: [email protected]
HADCO METAL TRADING - FLTampa BayTel: 813-258-4499Fax: [email protected]
HADCO METAL TRADING - FLPompano beachTel: 800-537-9953Fax: [email protected]
THE FAR EAST:
DALIAN BEST METALSChinaTel: 86-411-87187155/255Fax: [email protected]
53084B_catalog_Aluminum_02 8/30/07 2:00 PM Page 2
ALUMINUM 6061Scope Metals Group is a leading distributorand supplier of finished and semi-finishedmetals products and engineered plasticsproducts to industrial manufacturers.
With an extensive inventory of over 60,000off-the-shelf items, Scope operates as aone-stop shop on a “just-in-time”, 24-hourdelivery basis to domestic customers.
Scope supplies aluminum, stainless steel,steel, brass, copper, bronze, titanium, nickelalloys, and engineered plastics products.
In addition to exporting from the EasternMediterranean, Scope Metals Group operatesdistribution centers in Eastern & CentralEurope, China and on the East Coast of theUnited States.
We hold in stock a range of aerospacealuminum materials in the 2XXX series andthe 7XXX series, and materials in the 5XXXseries for the ship building industry. We alsohold commercial aluminum alloys in the 1XXX,5XXX and 6XXX series.
The 6061 aluminum plate is known for itsweldability and its excellent machinability,making it versatile for a wide range ofapplications and end-uses.
Stress-relieving tempers are available both inplates (T651, T652) and the following shapes:sheets, flats, round & square bars, angles,rectangular/ square tubes and hollow bars(T6, T651, T6511).
6061 T652
48" x 144"or cut to your required lengths,also with blanking
6061/6063 T5 / T61/4" –6"Available in various wall thicknessesAlso available in metric sizes
FLAT PRODUCTS
LONG PRODUCTS
ALLOY SIZE
Advanced cut-to-length and blanking lines
Slitting line
10 fully automatic "Schelling" disc saws (plates up to 250 mm /10” thickness by 4.0 meters /157” in length)
Polishing and PVC coating line
Band saws (1000 mm DIA)
Band saws for plates up to 800 mm thickness, size 2000 mm x 6000 mm
Scope’s position as leading distributor is supported by state-of-the-artautomatic and computerized warehouses and processing equipment:
*Information and images contained in this catalog is intended for informational purposes only. it is the responsibility of the customer to verify the suitability of any productto its intended use. SCOPE is under no obligation to deliver or stock any of the items described herein. Product information is subject to change without notice.
PRODUCT
ASTM B-221
FLAT BARS(EXTRUDED)
6061 T651 / T6AIRCRAFT QUALITY
AMS-QQ-A-225/8ASTM B211
DIA3/8"- 8"or cut to your required lenghts
6061 T6511 / T6 AMS-QQ-A-200/8ASTM B-221
DIA1/4" – 18"or cut to your required lenghtsAlso available in metric sizes
6061 T6511 / T6AMS-QQ-A-200/8ASTM B-221
A/F1/4" – 2"or cut to your required lenghtsAlso available in metric sizes
6061 T6511 / T6 AMS-QQ-A-200/8ASTM B-221
SQUARE5/16" – 10"or cut to your required lenghtsAlso available in metric sizes
6061 T6511/ T6 AMS-QQ-A-200/8ASTM B-221
FLAT1/2" – 6"or cut to your required lenghts
6061/6063 T5 / T6 ASTM B-2211/8" – 8"Available in various wall thicknessesAlso available in metric sizes & unequal angles
6061/6063 T5 / T6 ASTM B/221/241Large variety of sizesor cut to your required lengths
6061 T6 / T6511ASTM B/221/241/248
OD 1" - OD 12"or cut to your required lenghtsAvailable in various wall thicknessAlso available in metric sizes
ANGLES
HOLLOW BARS(STRUCTURAL/SEAMLESS)
ROUND TUBES
SQUARE &RECTANGULAR TUBES
HEXAGON BARS(EXTRUDED)
SQUARE BARS(EXTRUDED)
ROUND BARS(COLD FINISH)
ROUND BARS(EXTRUDED)
ALLOY PRODUCT
6061TO, T4 & T6
Large variety of sizesor cut to your required sizes
Large variety of sizesor cut to your required sizes
6061 T651
1.2 – 6 mm0.016" - 0.19"
SIZE (THICKNESS)
1/4" – 10"
11" - 18"
PLATES
SHEETS COILS
SPECIFICATIONS
AMS-QQ-A-250/11ASTM B209
AMS-QQ-A-250/11ASTM B209
AMS-QQ-A-250/11ASTM B209
SIZE (DIMENSIONS = WIDTH AND/OR LENGTH)
PLATES
SPECIFICATIONS
53084B_catalog_Aluminum_02 8/30/07 2:00 PM Page 2
ALUMINUM 6061Scope Metals Group is a leading distributorand supplier of finished and semi-finishedmetals products and engineered plasticsproducts to industrial manufacturers.
With an extensive inventory of over 60,000off-the-shelf items, Scope operates as aone-stop shop on a “just-in-time”, 24-hourdelivery basis to domestic customers.
Scope supplies aluminum, stainless steel,steel, brass, copper, bronze, titanium, nickelalloys, and engineered plastics products.
In addition to exporting from the EasternMediterranean, Scope Metals Group operatesdistribution centers in Eastern & CentralEurope, China and on the East Coast of theUnited States.
We hold in stock a range of aerospacealuminum materials in the 2XXX series andthe 7XXX series, and materials in the 5XXXseries for the ship building industry. We alsohold commercial aluminum alloys in the 1XXX,5XXX and 6XXX series.
The 6061 aluminum plate is known for itsweldability and its excellent machinability,making it versatile for a wide range ofapplications and end-uses.
Stress-relieving tempers are available both inplates (T651, T652) and the following shapes:sheets, flats, round & square bars, angles,rectangular/ square tubes and hollow bars(T6, T651, T6511).
6061 T652
48" x 144"or cut to your required lengths,also with blanking
6061/6063 T5 / T61/4" –6"Available in various wall thicknessesAlso available in metric sizes
FLAT PRODUCTS
LONG PRODUCTS
ALLOY SIZE
Advanced cut-to-length and blanking lines
Slitting line
10 fully automatic "Schelling" disc saws (plates up to 250 mm /10” thickness by 4.0 meters /157” in length)
Polishing and PVC coating line
Band saws (1000 mm DIA)
Band saws for plates up to 800 mm thickness, size 2000 mm x 6000 mm
Scope’s position as leading distributor is supported by state-of-the-artautomatic and computerized warehouses and processing equipment:
*Information and images contained in this catalog is intended for informational purposes only. it is the responsibility of the customer to verify the suitability of any productto its intended use. SCOPE is under no obligation to deliver or stock any of the items described herein. Product information is subject to change without notice.
PRODUCT
ASTM B-221
FLAT BARS(EXTRUDED)
6061 T651 / T6AIRCRAFT QUALITY
AMS-QQ-A-225/8ASTM B211
DIA3/8"- 8"or cut to your required lenghts
6061 T6511 / T6 AMS-QQ-A-200/8ASTM B-221
DIA1/4" – 18"or cut to your required lenghtsAlso available in metric sizes
6061 T6511 / T6AMS-QQ-A-200/8ASTM B-221
A/F1/4" – 2"or cut to your required lenghtsAlso available in metric sizes
6061 T6511 / T6 AMS-QQ-A-200/8ASTM B-221
SQUARE5/16" – 10"or cut to your required lenghtsAlso available in metric sizes
6061 T6511/ T6 AMS-QQ-A-200/8ASTM B-221
FLAT1/2" – 6"or cut to your required lenghts
6061/6063 T5 / T6 ASTM B-2211/8" – 8"Available in various wall thicknessesAlso available in metric sizes & unequal angles
6061/6063 T5 / T6 ASTM B/221/241Large variety of sizesor cut to your required lengths
6061 T6 / T6511ASTM B/221/241/248
OD 1" - OD 12"or cut to your required lenghtsAvailable in various wall thicknessAlso available in metric sizes
ANGLES
HOLLOW BARS(STRUCTURAL/SEAMLESS)
ROUND TUBES
SQUARE &RECTANGULAR TUBES
HEXAGON BARS(EXTRUDED)
SQUARE BARS(EXTRUDED)
ROUND BARS(COLD FINISH)
ROUND BARS(EXTRUDED)
ALLOY PRODUCT
6061TO, T4 & T6
Large variety of sizesor cut to your required sizes
Large variety of sizesor cut to your required sizes
6061 T651
1.2 – 6 mm0.016" - 0.19"
SIZE (THICKNESS)
1/4" – 10"
11" - 18"
PLATES
SHEETS COILS
SPECIFICATIONS
AMS-QQ-A-250/11ASTM B209
AMS-QQ-A-250/11ASTM B209
AMS-QQ-A-250/11ASTM B209
SIZE (DIMENSIONS = WIDTH AND/OR LENGTH)
PLATES
SPECIFICATIONS
