Upload
nguyendieu
View
224
Download
4
Embed Size (px)
Citation preview
Sold and Supported byPat Mooney Saws
Aluminum and Non-Ferrous Circular Saws
665-13303 PMI Brochure_Layout 1 11/8/13 4:05 PM Page 2
The PMI High Speed Upcut Aluminum Saws are designed to cut aluminum profiles quickly and accurately.The PMI saws will leave a burr free, mirror image finish on cut parts. The upcut design, enclosed saw bladechamber, and powerful saw motors ensure a productive and safe work environment.
PMI-18 FEATURES• 7.5 HP saw motor• Upcut design and fully enclosed saw blade chamber• Precision-ground worktable with special surface coating• Pneumatic clamping system with adjustable clamping pressure to prevent distortionof thin walled aluminum extrusions
• Saw blade feed controlled via air / hydraulic• Precise micro-drip blade lubrication system• Vertical and horizontal clamps
PMI UPCUT ALUMINUM SAWS
Semi-Automatic Straight Cutoff Upcut & Horizontal Saw Specifications
Model Cutting CapacityRound
Cutting Capacity Max. Width Blade Dimensions Saw Motor Power Blade Speed Machine
Weight
PMI-18 5.905" 12" 18" 7.5 HP 3500 rpm 770 lbs
PMI-24 7.873" 15.875" 24" 7.5 HP 2000 rpm 1210 lbs
PMI-30 9.841" 19.843" 30" 20 HP 1800 rpm 1496 lbs
PMI-30L 10.433" 35.433" 30" 20 HP 1500 rpm 3960 lbs
Straight Cutoff Upcut Models
PMI-24 FEATURES• 7.5 HP saw motor• Upcut design and fully enclosed saw blade chamber• Precision-ground worktable with special surface coating• Hydraulic clamping system with adjustable clamping pressure to prevent distortionof thin walled aluminum extrusions
• Saw blade feed controlled via air / hydraulic• Precise micro-drip blade lubrication system• Vertical and horizontal clamps
PMI-30 FEATURES• 20 HP saw motor• Upcut design and fully enclosed saw blade chamber• Precision-ground worktable with special surface coating• Hydraulic clamping system with adjustable clamping pressure to prevent distortionof thin walled aluminum extrusions
• Saw blade feed fully hydraulic• Precise micro-drip blade lubrication system• Vertical and horizontal clamps
665-13303 PMI Brochure_Layout 1 11/8/13 4:06 PM Page 3
The PMI High Speed Upcut Aluminum Saws are designed to cut aluminum profiles quickly and accurately.The PMI saws will leave a burr free, mirror image finish on cut parts. The upcut design, enclosed saw bladechamber, and powerful saw motors ensure a productive and safe work environment.
PMI MITER UPCUT SAWS
Semi-Automatic Mitering Upcut Saw Specifications
Model Cutting CapacityRound
Cutting Capacity Max. Width Blade Dimensions Saw Motor Power Blade Speed Machine
Weight
PMI-16 4.33" 8.66" 16" 3 HP 3600 rpm 900 lbs
PMI-20 5.905" 13.188" 20" 7.5 HP 3000 rpm 1275 lbs
PMI-20 24 7.873" 15.875" 24" 7.5 HP 2000 rpm 2028 lbs
PMI-20 30 9.841" 19.843" 30" 10 HP 1500 rpm 2680 lbs
PMI-20 36 12.204" 21.653" 36" 10 HP 1200 rpm 3960 lbs
Mitering Upcut Models
PMI-20 FEATURES• 7.5 HP saw motor• Upcut design and fully enclosed saw blade chamber• Precision-ground worktable with special surface coating• Pneumatic clamping system with adjustable clamping pres-sure to prevent distortion of thin walled aluminum extrusions
• Saw blade feed controlled via air / hydraulic• Precise micro-drip blade lubrication system• Vertical and horizontal clamps• Miter capability
PMI-20 24 FEATURES• 7.5 HP saw motor• Upcut design and fully enclosed saw blade chamber• Precision-ground worktable with special surface coating• Pneumatic clamping system with adjustable clamping pressure to prevent distortionof thin walled aluminum extrusions
• Saw blade feed controlled via air / hydraulic• Precise micro-drip blade lubrication system• Vertical and horizontal clamps
PMI-20 30 FEATURES• 10 HP saw motor• Upcut design and fully enclosed saw blade chamber• Precision-ground worktable with special surface coating• Pneumatic clamping system with adjustable clamping pressure to prevent distortionof thin walled aluminum extrusions
• Saw blade feed fully hydraulic• Precise micro-drip blade lubrication system• Vertical and horizontal clamps
PMI-20Upcut Saw with
AutomatedStop/Gauge andPusher Systems -Fast and AccurateEvery Time.
665-13303 PMI Brochure_Layout 1 11/8/13 4:06 PM Page 4
PMI AUTOMATIC MITER SAWS
PMI-455 Fully Automatic Saws are designed for sawing aluminum extrusions and solids to aprecise length. PMI-455 Series Saws are available in upcut and crosscut (horizontal) models.
PMI-455 Fully Automatic High Speed Circular Saws for Aluminum
FEATURES• Touchscreen control for easy job setup• Simple set up to run stacked or bundlelengths of material
• Ballscrew-controlled shuttle indexingvise and servo motor driven for precise cuts
• Incremental material indexing for fastercycle times
• Standard with horizontal and verticalclamps on the shuttle vise and fixedsaw vise
PMI AUTOMATIC ALUMINUM SAWS
PMI Automatic Miter Upcut Saws SpecificationsPMI Auto Miter 20 Type 20 24 Type 20 30 Type
Auto Miter Rotation ± 45 degrees ± 60 degrees ± 60 degrees
Cutting Capacity 5.905" Round, 5.905" Square½" x 13-1/4" Rectangle
7.873" Round, 7.873" Square½" x 15-3/4" Rectangle
9.448" Round. 9.448" Square½" x 17-1/4" Rectangle
Cutting Capacity 20" x 1" Bore 24" x 1" Bore 30" x 1" BoreSaw Blade Speed 3000 RPM 2000 RPM 1500 RPM
Saw Motor 7.5 HP 7.5 HP 10 HPServo Motor Pusher 400 w (750 w Optional) 400 w (750 w Optional) 400 w (750 w Optional)Servo Motor Rotation 400 w 400 w 400 wPusher Feed Speed 66 to 110 FPM 66 to 110 FPM 66 to 110 FPM
Pusher System Length 8 Ft to 21-1/2 Ft 8 Ft to 21-1/2 Ft 8 Ft to 21-1/2 Ft
Fully Automatic Saws with automatic saw headrotation and automatic material indexing.Features include touch screen control for easyjob setup, servo motor driven pusher system(available in working lengths from 8 Ft to 21-1/2Ft) and saw head rotation, fully automatic sawcycle and 100 program storage.
665-13303 PMI Brochure_Layout 1 11/8/13 4:07 PM Page 5
PMI AUTOMATIC ALUMINUM SAWS
(inch)
6.89
7.87
5.91
4.92
3.94
2.95
1.97
0.98
0
MAX. cutting and clamping height 6.89" (optional MAX cutting height and clamping 7.87") clamping systemMAX. cutting and clamping width 15.75"
clamping system
0 0.98 1.97 2.95 3.94 4.92 5.91 7.87 6.89 8.86 9.84 10.83 11.81 12.80 13.78 14.76 15.75 16.73 17.72 (inch)Fence Position
W
H
6.89
(inch)
99
h))
MAX. cutting and clamping width 15.75"MAX. cutting and clamping height 6.89" (optional MAX cutting height and clamping 7.87") clamping system
HMAX. cutting and clamping width 15.75"MAX. cutting and clamping height 6.89" (optional MAX cutting height and clamping 7.87") clamping systemMAX. cutting and clamping height 6.89" (optional MAX cutting height and clamping 7.87") clamping systemMAX. cutting and clamping height 6.89" (optional MAX cutting height and clamping 7.87") clamping systemMAX. cutting and clamping height 6.89" (optional MAX cutting height and clamping 7.87") clamping system
1.97
2.95
3.94
4.92
5.91
7.87
1.97
2.95
3.94
4.92
7.87
0
0.98
1.97
Fence Position
88
1.97
Fence Position0 0.98 1.97 2.95 3.94 4.92 5.91 7.87 6.89 8.86 9.84 10.83 11.81 12.80 13.78 14.76 15.75 16.73 17.72 (inch)0 0.98 1.97 2.95 3.94 4.92 5.91 7.87 6.89 8.86 9.84 10.83 11.81 12.80 13.78 14.76 15.75 16.73 17.72 (inch)0 0.98 1.97 2.95 3.94 4.92 5.91 7.87 6.89 8.86 9.84 10.83 11.81 12.80 13.78 14.76 15.75 16.73 17.72 (inch)0 0.98 1.97 2.95 3.94 4.92 5.91 7.87 6.89 8.86 9.84 10.83 11.81 12.80 13.78 14.76 15.75 16.73 17.72 (inch)0 0.98 1.97 2.95 3.94 4.92 5.91 7.87 6.89 8.86 9.84 10.83 11.81 12.80 13.78 14.76 15.75 16.73 17.72 (inch)
W
clamping system
w
H
inch
inch
0
6.30
.79
1.97
3.94
4.92
1.97 4.92 5.91 7.87 9.84 11.810 .98 2.95 3.94 6.87 8.86 10.83 12.80
A TYPE - UPCUT SAW
• Saw Travels through the Workpiece from under theWorktable
• Compact• Saws a Variety of Feed Lengths• 10 HP Motor Enables Quick and Precise Sawing ofAluminum Extruded Shapes or Smaller Bars
L TYPE - HORIZONTAL SAW
• Powerful Crosscut Sawhead Design• Sawhead Moves on Precision Linear Guideways• Type LE - 15 HP Motor Allows for Sawing of Extrusionsand Tubes
• Type LS - 20 HP Motor Enables Sawing of Solid Barsand Extruded Shapes
PMI Fully Automatic Aluminum Saws SpecificationsPMI-455 A-Type LE-Type LS-Type
Saw Head Type Upcut CrossCut (horizontal) CrossCut (horizontal)Cutting Capacity See Chart See Chart See Chart
Material Feed System Ball Screw with Servo Motor Ball Screw with Servo Motor Ball Screw with Servo MotorStroke Length 20" 55" (optional 118") 55" (optional 118")
Saw Blade Speed 3200 RPM 1500 to 3500 RPM 1500 to 3500 RPMSaw Motor 10 HP 15 HP 20 HP
Hydraulic Motor 1 HP 1 HP 1 HPChip Collector 3 HP 5 HP 5 HPInfeed Conveyor 13 Ft 11-1/2 Ft 11-1/2 FtSaw Blade Size 18" x 1" bore 12" to 24" diameter (1" bore) 12" to 24" diameter (1" bore)Machine Weight 3,080 LBS 5,060 LBS 5,060 LBS
Machine Dimensions 98.5" x 52" x 79.5" 138" x 83" x 74" 138" x 83" x 74"
L Type Cutting Chart
A Type Cutting Chart
665-13303 PMI Brochure_Layout 1 11/8/13 4:07 PM Page 6
NOTCHING SAWS - DOUBLE BLADE ANGULAR SAWS
Double Blade Angular Saw Specifications
Model Cutting Angle CuttingCapacity Blade Dimensions Saw Motor Power Blade Speed Machine
Weight
PMI-14 A 45˚ 4" x 4", 3-1/4" x 4-3/4", 2-3/8" x 7" ø14" x ø1" x 2 pcs 2 HP x 2 3300 rpm 682 LBS
PMI-14 B 45˚ 5-1/8" x 6", 4" x 7", 2-3/4" x 10" ø18" x ø1" x 2 pcs 2 HP x 2 3300 rpm 1100 LBS
PMI-14 C 45˚ 5-1/8" x 5-1/8"(8" maximum height) ø14" x ø1" x 2 pcs 2 HP x 2 3200 rpm 770 LBS
PMI-LJK500 ±45˚ 6" x 6" (7-3/4" x 6" optional)
26" x 1" (vertical)20" x 1" (horizontal) 3 HP x 2 2800 rpm 3300 LBS
Double Blade 45 Degree Cutoff Saw
Double Blade Notching Saw
Double Blade Notching Saw
PMI-14 A AND B TYPE FEATURES • Equipped with two saw heads that are fixed at a 45degree angle so in a single saw cycle two 45 degreecuts are produced
• Ideal saw for applications that require opposing 45degree miter cuts
• The double saw blade design provides fast cut times togreatly increase efficiency
• Standard with vertical and horizontal clamps• Standard equipment includes infeed and outfeed tablewith built in manual length stop
PMI-14 C TYPE FEATURES• Ideal machine for notching applications• The two saw heads feed vertically on precision groundshafts
• The saw blades are staggered and positioned at 45degrees to reduce waste
• Large cutting capacity – 8" maximum height• Adjustable saw blade stroke for faster cycle times• Standard with horizontal and vertical clamps
PMI-LJK500 FEATURES• Equipped with two saw heads that move +/- 45 degreeswhich allows for various types of notch cuts
• The two saw heads can work simultaneously to achievethe processing of special angles at the end of the profilesurface
• This machine was specifically designed with the aluminumcurtain-wall and skylight processing industries in mind
• Equipped with digital read out to display the cutting angleand worktable height
665-13303 PMI Brochure_Layout 1 11/8/13 4:08 PM Page 7
DOUBLE HEAD MITER SAWS
Automatic Double Head Compound Miter Saw
Automatic Double Saw Machine (45 degrees)
Automatic Double Head Miter Saw
Double Head Miter Saw Specifications
Model Control Mode ofAngle and Length
CuttingCapacity Blade Dimensions Saw Motor
PowerBladeSpeed
MachineWeight
PMI-T3 M15 Automatic
22.5 Min Cutting Length 17-3/4", Cutting Size 4" x 4"
ø20" x ø1" x 120T 3 HP x 2 2850 rpm 3960 LBS45 Min Cutting Length 17-3/4", Cutting Size 5-1/2" x 5-1/2"
90 Min Cutting Length 17-3/4", Cutting Size 6" x 6"
135 Min Cutting Length 21-1/2", Cutting Size 5-1/2" x 5-1/2"
Max cutting length 177" (optional 256")
PMI-T5 Servomotor
90 Cuts 5-1/2" x 5-1/2"
ø20" x ø1" x 120T 5 HP x 2 2840 rpm 4840 LBS45 degree cuts 4" x 8"
Max Cut Length 157" (optional 236")
Min cut length 17-3/4" at 90 degrees
Min cut length 31-1/2" when cutting at 135 degrees
PMI-T3L M15 AutomaticMin Cutting Length 20", Cutting Size 3-1/2" x 8"
ø405" x ø25.4" x 120T 3 HP x 2 3600 rpm 3960 LBSMax Cutting Length 138" (other sizes available)
PMI-T3 FEATURES• Each saw head miters -22.5 degrees and +45 degrees• Automatic length and angle positioning• 3-axis M15 automatic control for the angle and length• Movable saw head slides on linear guideways toensure accurate movements
PMI-T5 FEATURES• Each saw head is capable of rotating ±45 degreesautomatically and tilting from ±45 degrees (compound miter)
• Automatic cut length positioning • 5-axis servomotor control• Easy-to-use touch screen control• Moveable saw head slides on linear guideways toensure accurate movements
PMI-T3L FEATURES• Double head saw designed for cutting 45 degree miters • Saw heads move through the material horizontally (crosscut) to allow for cutting large sections of material
• Saw heads move on linear guideways• Automatic cut length positioning• Moveable saw head slides on linear guideways to ensureaccurate movements
90
45
90
45
90
135 45
90
45 135
665-13303 PMI Brochure_Layout 1 11/8/13 4:08 PM Page 8
502 S. Westgate Street, Addison, IL 60101-4525Phone: 630-543-6222 Fax: 630-543-5584Toll-Free: [email protected]
Pat Mooney is the exclusive importer and sales/serviceagent for PMI Saws. Expertly trained, our servicespecialists have the knowledge necessary to quicklyrespond to your PMI service and support needs.
• Trained, Qualified Service Personnel• A Large Inventory of Replacement Parts and Blades• New Blades for Special Applications
SERVICE AND SUPPORT
PMI NON-FERROUS SAW INSTALLATIONS
PMI-455 LS-Type Fully Automatic Aluminum Saw PMI-20 Upcut Saw with Tiger Stop System
PMI-455 LS-Type Fully Automatic Aluminum Saw PMI-18 Upcut Saw with 16 Foot Tiger Stop Automatic Pusher System
665-13303 PMI Brochure_Layout 1 11/8/13 4:05 PM Page 1