Alcatel-Lucent OmniSwitch 9000E - Alcomtech - docs/LAN Switch/Omniswitch9000e/OS90  Alcatel-Lucent

  • View
    215

  • Download
    0

Embed Size (px)

Text of Alcatel-Lucent OmniSwitch 9000E - Alcomtech - docs/LAN Switch/Omniswitch9000e/OS90 ...

  • Alcatel-Lucent OmniSwitch 9000EC H A S S I S L A N S W I T C H

    The Alcatel-Lucent OmniSwitch 9000E Chassis LAN Switch (CLS) family is a high-capacity core switch that

    addresses large enterprise network needs for secure and highly available core switches to support voice, data

    and video solutions. The OmniSwitch 9000E CLS, part of the OmniSwitch portfolio, is also ideal for use in data

    centers or metro Ethernet environments because it was designed for deployments requiring high capacity,

    scalability and virtualization.

    The OmniSwitch 9000E CLS family offers enterprises and service providers gigabit capacity, advanced layer-3 switching, high availability through in-service software upgrades (ISSUs), layer-2 segregation using VLANs, stacked VLANs and Virtual Private LAN Service (VPLS), as well as layer-3 segregation using multiple virtual routing and forwarding (VRF). The OmniSwitch 9000E CLS also uses the familiar and field-proven Alcatel-Lucent Operating System (AOS), providing effortless deployment and extended features to address new customer requirements.

    Finally, the OmniSwitch 9000E CLS family promotes eco-sustainability by using minimal power, thus reducing energy bills and air-conditioning costs.

    Key features and benefits

    High availability

    SmartcontinuousswitchingandISSUsupport for non-stop operation in redundant chassis management module (CMM) configuration

    Extensivelayer-2andlayer-3protocolssupport for spatial resiliency

    High performance and scalability

    Wire-rateprocessingforsimultaneouslayer-2 and IPv4/IPv6 traffic

    HighdensityGigabitEthernet(GigE)(384ports)and10GigE(192ports)

    Extendedscalabilityinnetworkpolicies, access control lists (ACLs)/quality of service (QoS) and multicast flows for a better VoIP and video experience

    Comprehensive security

    Flexibledevice/userauthenticationwithAccessGuardian(802.1x/MAC/captive portal), with built-in host integritycheck(HIC),intrusiondetection system (IDS) and quaran-tine enforcement mechanism

    ExtensivesupportofAlcatel-LucentOperating System (AOS) user-oriented features

  • Alcatel-Lucent OmniSwitch 9000E | Data Sheet2

    Large campus and metro network

    Layer-2deploymentusingstackedVLANs, including OA&M toolbox and multicast support Metro Ethernet access-ready

    Layer-3deploymentusingmultiple-VRF

    IP/MPLSdeploymentusingVPLS

    Convergence

    EnhancedVoIPandvideoperfor-mance with policy-based QoS

    PoE+supportforIPphones,WLANaccess points and video cameras withupto2400Wofpower through dedicated power shelves

    OmniSwitch 9700E/OmniSwitch 9702E OmniSwitch 9800E

    NUMBER OF SLOTS

    Chassis management module (CMM) 2 2

    Network interface (NI) 8 16

    Power supply (AC/DC) 3 4

    PHYSICAL

    Height (19-in. and 23-in. rack mount) 11U 17U

    Dimensions (HxWxD) 48.9 cm x 44.2 cm x 44.0 cm (19.25 in x 17.4 in x 17.3 in)

    75.6 cm x 44.2 cm x 44.0 cm (29.75 in x 17.4 in x 17.3 in)

    Weight (loaded/empty) 60 kg (130 lb)/25 kg (56 lb) 85 kg (190 lb)/36 kg (80 lb)

    ENVIRONMENT

    Operating temperature 0C to 45C (32F to 113F) 0C to 45C (32F to 113F)

    Storage temperature 10C to 70C (14F to 158F) 10C to 70C (14F to 158F)

    Operating and storage humidity 10% to 90% (non-condensing) 10% to 90% (non-condensing)

    Cooling Front-to-back cooling Front-to-back cooling

    Power (chassis + fan tray)

  • Alcatel-Lucent OmniSwitch 9000E | Data Sheet 3

    ModulesThe table below lists the choice of modules available for the OmniSwitch 9000E CLS family.

    DESCRIPTION POWER

    MANAGEMENT MODULES

    OS9700E-CMM OmniSwitch 9700E Chassis Management Module

  • Alcatel-Lucent OmniSwitch 9000E | Data Sheet4

    Detailed product features

    Simplified manageabilityManagement interfaces

    Intuitive,familiarAlcatel-LucentCLIreducestraining costs

    Easy-to-use,point-and-click,web-basedelement manager (WebView) with built-in help for easy configuration

    IntegratedwithAlcatel-LucentOmniVista 2500 Network Management System (NMS)

    FullconfigurationandreportingusingSimpleNetwork Management Protocol (SNMP) v1/2/3 across all OmniSwitch families to facilitate third-party NMS integration

    RemoteswitchaccessusingTelnetorSecureShell (SSH)

    FileuploadusingUSB,TFTP,FTP,SFTP,orSCPfor faster configuration

    Human-readableASCII-basedconfigurationfiles for off-line editing, bulk configuration and out-of-the-box auto-provisioning

    Monitoring and troubleshooting

    Local(ontheflash)andremoteserverlogging:Syslog and command log

    Port-basedmirroringfortroubleshootingandlawful interception; supports four sessions with multiple sources-to-one destination

    Policy-basedmirroringallowsselectionofthetype of traffic to mirror by using QoS policies

    Remoteportmirroringfacilitatespassingmirrored traffic through the network to a remotely connected device

    Portmonitoringfeatureallowscapture of Ethernet packets to a file to assist in troubleshooting

    sFlowv5andRMON:Foradvancedmonitoringand reporting capabilities for statistics, history, alarms and events

    IPtools:Pingandtraceroute

    ITU-TY.1731andIEEE802.1agEthernet OA&M: Connectivity Fault Management and performance measurements (layer-2 ping and link trace)

    IEEE802.3ahEthernetintheFirstMile(EFM)for link monitoring, remote fault detection, and loopback control (layer-1 ping)

    UnidirectionalLinkDetection(UDLD)detectsand disables unidirectional links on fiber optic interfaces

    DigitalDiagnosticMonitoring(DDM):Real-timediagnostics of fiber connections for early detection of optical signal deterioration

    LinkMonitoring:linkflapdetectionandlinkerror counts to identify bad connections and automatically make adjustments to use the links that are good

    TimeDomainReflectometry(TDR):used for locating break or other discontinuity in copper cables

    Network configuration

    Auto-negotiating10/100/1000portsautomaticallyconfigure port speed and duplex setting

    AutoMDI/MDIXautomaticallyconfigurestransmitand receive signals to support straight-through and crossover cabling

    BOOTP/DHCPclientwithoption60allowsauto-configuration of switch IP information for simplified deployment

    DHCPrelaytoforwardclientrequeststoa DHCP server

    Alcatel-LucentMappingAdjacencyProtocol(AMAP) for building topology maps

    IEEE802.1ABLLDPwithMEDextensions for automated device discovery and IP phone provisioning

    MultipleVLANRegistrationProtocol(MVRP)and GARP VLAN Registration Protocol (GVRP) for 802.1Q/1ak-compliant VLAN pruning and dynamic VLAN creation

    Auto-QoSforswitchmanagementand IP phone traffic

    NetworkTimeProtocol(NTP)fornetwork-widetime synchronization

    Resiliency and high availability Smartcontinuousswitchingtechnologyfor

    instantaneous and transparent CMM failover in redundant CMM configuration

    ISSUfornon-disruptivemaintenancesoftwareupgrade in redundant CMM configuration

    ITU-TG.8032EthernetRingProtectiondesignedfor loop protection and fast convergence times (sub 50 ms) in ring topologies

    RingRapidSpanningTree(RRSTP)optimized for ring topology to provide less than 100-ms convergence time

    IEEE802.1sMultipleSpanningTreeProtocol(MSTP): Encompasses IEEE 802.1D Spanning Tree Protocol (STP) and IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

    Per-VLANSpanningTree(PVST+)andAlcatel-Lucent 1x1 STP mode

    IEEE802.3adLinkAggregationControlProtocol(LACP) and static LAG groups across modules are supported

    Dual-homelinksupportforsub-secondlinkprotection without STP

    VirtualRouterRedundancyProtocol(VRRP)toprovide highly available routed environments

    BidirectionalForwardingDetection(BFD)forfastfailure detection and reduced re-convergence times in a routed environment

    Broadcast,unknownunicastandmulticaststorm control to avoid degradation in overall system performance

    Redundantandhot-swappablepower supplies, transceiver modules offering uninterruptible service

    Dualimageanddualconfigurationfilestorageprovides backup

    WCCPv2fortransparenttrafficflowredirectionand better bandwidth utilization

    Advanced securityAccess control

    AOSAccessGuardianframeworkfor comprehensive user-policy-based network access control (NAC)

    Auto-sensing802.1Xmulti-client,multi-VLAN

    MAC-basedauthenticationfornon-802.1xhosts

    Web-basedauthentication(captiveportal): A customizable web portal residing on the switch that can be used for authenticating supplicants as well as non-supplicants

    GroupmobilityrulesandguestVLANsupport

    AuthenticatedVLANthatchallengesuserswithusername and password and supports dynamic VLAN access based on user

    Hostintegritycheck(HIC)agentoneach switch makes it an HIC enforcer and facilitates endpoint device control for company policy compliance; quarantine and remediation are supported as required

    UserNetworkProfile(UNP):SimplifiesNACmanagement and control by dynamically providing pre-defined policy configuration to authenticated clients VLAN, ACL, bandwidth, HIC

    SSHforsecureCLIsessionwithpublickeyinfrastructure (PKI) support

    CentralizedRADIUSandLightweightDirectoryAccess Protocol (LDAP) user authentication

    TACACS+clientallowsforauthentication,authorization and accounting (AAA) with a remote TACACS+ server

    Containment, monitoring and quarantine

    SupportforAlcatel-LucentOmniVista2500NMSQuarantine Manager and quarantine VLAN

    LearnedPortSecurity(LPS)orMACAddressLockdown: Secures the network access on user or trunk ports based on MAC address

    DHCPsnooping,DHCPIP/AddressResolutionProtocol (ARP) spoof protection

    Embeddedtrafficanomalydetection(TAD)monitors traffic patterns typical for worm-like viruses

View more >