AK Catalogue ED7 150dpi

ALKONFASTENERS

WWW.ALKON.COM.AU

EDITION 7 Product Catalogue

BRISBANE 2/25 Michlin St, Moorooka, QLD, 4105 P (07) 3848 6855 F (07) 3848 0411E [email protected]

MELBOURNE 12-14 Abruzzo Cres, Thomastown, VIC, 3074 P (03) 9464 3711 F (03) 9464 3733E [email protected]

Alkon Sales Pty Ltd has been a 100% Australian owned fastener supply company for over 40 years, during which time we have been involved in all facets of manufacture, importation and distribution of products to many satisfied customers Australia wide. We have held ISO 9001 quality certification since 1993, and we were the first Victorian small business company audited to this effect.

We are proudly part of the INENCO Group of companies (Consolidated Bearing Co. Hardy Spicer, Specialised Gaskets, Circlips Australia, to mention just a few) who employ 2,400 people in over 200 outlets throughout Australia.

Our own comprehensive experience and involvement with manufacturing plants in Australia and overseas enables us not only to insist on best practice, but also to incorporate our own design features for better product performance. We travel to our associates facilities on a regular basis to satisfy that standards are being maintained and this level of close co-operation has resulted in us having some quite exclusive supply arrangements.

To ensure consistent product quality all stock is inspected to relevant Australian or international standards, and parts specially manufactured are checked against the relevant drawing or specification. All product supplied into the market by Alkon has full traceability to the source of manufacture, and suppliers are chosen on their ability to provide consistently high standard of product.

We are continually looking to expand our product range, and seeking new ideas, as we place a high value on technical knowledge and problem solving skills. Parts can be manufactured to customers specifications. We are now also able to offer specialised packaging to suit your requirements

We are proud of our staff and their ability to offer the best standards of service in answer to your enquiries. We offer extremely competitive pricing and national distribution with response times second to none.

AK FASTENERS BY ALKON SALESTHE TRUSTED BRAND IN INDUSTRIAL FASTENERS.

BRISBANE

MELBOURNE

WING

Quality Coatings

Quality Coatings

ALKOTE TP

DRILL

DRILLDUO

DRILLDUO

DRILLDUO

DRILL

DECK TIMBER

TORPEDO

POLYCARBDUO

TORPEDO

POLYCARBDUO

WING

Quality Coatings

Quality Coatings

ALKOTE TP

DRILL

DRILLDUO

DRILLDUO

DRILLDUO

DRILL

DECK TIMBERWING

Quality Coatings

Quality Coatings

ALKOTE TP

DRILL

DRILLDUO

DRILLDUO

DRILLDUO

DRILL

DECK TIMBER

PRODUCT PAGE

Chipboard Screws Phillips ZINC YELLOW & CLASS 3 MECHANICAL GAL. 08

Chipboard Screws Sq Drive ZINC YELLOW & CLASS 3 MECHANICAL GAL. 08

Chipboard Screws Sq Drive STAINLESS STEEL 09

Chipboard Screws Phillips TREATED PINE 10

Super Chipboard Screws Phillips 11

Particle Board Screws Phillips 12

Director Screws 13

Lag Screws (Hanger Bolt) 13

Euro Screws (Hinge Screw) 13

Multi-purpose Wood Screws NANO COATING 14

PRODUCT PAGE

Self Tapping Screws Phillips ZINC 16

Self Tapping Screws Phillips STAINLESS STEEL 18

Self Tapping Screws Sq Drive STAINLESS STEEL 19

Self Tapping Screws Undercut Head 20

Self Tapping Screws Pilot Point Phillips & Sq Drive 20

Stitching Screws Hex Slot 21

Stitching Screws Pan Head 21

Pancake Head Screws (Flat Head Screws) 21

Drywall Screws Bugle Head Fine & Coarse Thread 22

Drywall Screws Bugle Head Collated 22

Stitching Screws Button Head 23

Cement Sheet Screws Self Piercing & Self Drilling 23

Section 1

Section 2

WING

Quality Coatings

Quality Coatings

ALKOTE TP

DRILL

DRILLDUO

DRILLDUO

DRILLDUO

DRILL

DECK TIMBER

TORPEDO

POLYCARBDUO

Contents

For up-to-date prices on our products, go to alkon.com.au

PRODUCT PAGE

Self Drilling Screws Hex Washer Head ZINC YELLOW & CLASS 4 24

Self Drilling Screws Hex Washer Head STAINLESS STEEL 25

Self Drilling Screws Series 500 25

Self Drilling Screws Button Head 25

Self Drilling Screws Hex Washer Head Double Grip 26

Self Drilling Multi-purpose Roofing Screws 26

Self Drilling Multi-purpose Polycarb Screws 26

Self Drilling Screws Wafer Head 27

Self Drilling Screws Bugle Head 27

Self Drilling Screws Pan Head 27

Self Drilling Screws Countersunk 28

Self Drilling Screws Countersunk with Wings 28

Self Drilling Screws Undercut Head 28

Self Drilling Security Screws Pentagon Head 29

Section 3

Section 4PRODUCT PAGE

Type 17 Thread Cutting Screws - Hex Washer Head 30

Type 17 Hex Washer Head Double Grip 31

Type 17 Wafer Head 31

Type 17 Countersunk Head Phillips & Sq Drive 32

Type 17 Bugle Batten Screws - Hex Drive ZINC YELLOW & CLASS 3 32

Type 17 Bugle Batten Screws - Hex Drive STAINLESS 33

Type 17 Decking Screws CSK Sq Drive STAINLESS 33

Type 17 Trilobular Security Screws Pan Head 33

WING

Quality Coatings

Quality Coatings

ALKOTE TP

DRILL

DRILLDUO

DRILLDUO

DRILLDUO

DRILL

DECK TIMBER

TORPEDO

POLYCARBDUO

Section 5

Section 6

PRODUCT PAGE

Metal Thread Screws Pan Head 34

Metal Thread Screws Mushroom Head 35

Furniture Screws Hex Washer Head 35

Furniture Screws Flat Head 36

Set Screws Hex Head 36

Washer Assembled (SEMS) Screws Hex Head 37

Nuts Hexagon 37

Nuts Flange Serrated Locking 38

Nuts Nylon Insert Locking 38

Nuts Wing 39

Nuts Tee Nuts for Timber 39

Threaded Rod 40

PRODUCT PAGE

Masonry Anchors Sleeve Flange Nut ZINC YELLOW 42

Masonry Anchors Countersunk ZINC YELLOW 42

Masonry Anchors Sleeve Flange Nut MECHANICAL GAL. 43

Masonry Anchors Sleeve Flange Nut STAINLESS STEEL 43

Masonry Anchors Drop In 44

Speed Wall Plugs NYLON & METAL 44

Wall Plugs 44

Nail In Plugs 45

Rivets ALUMINIUM / STEEL 45

Rivets ALL STEEL & ALL STAINLESS 46

Rivets Large Flange ALUMINIUM / STEEL 46

Contents

PRODUCT PAGE

Colour Matrix Rivets 57

Colour Matrix Self Drillers 58

Colour Matrix Type 17 60

Packaging 62

Also Available 64

Terms & Conditions 65

Section 6 - continued

Section 7

PRODUCT PAGE

Driver Bits 47

Panel Drills Double Ended 48

Jobber Drills 48

Hex Key Wrench 50

Neoprene Washer 50

Adhesives 51

Handy Packs 53

LOOK FOR THE NEXT TO OUR NEWEST EXPANDED RANGES

Chipboard ScrewsPHILLIPS DRIVE WITH NIBS. ZINC YELLOW & CLASS 3 MECHANICAL GAL.

Square Drive Chipboard Screws

SIZE ZY CODE C3 CODE

8g x 20mm CH 0820 ZY CH 0820 C38g x 25mm CH 0825 ZY CH 0825 C38g x 28mm CH 0828 ZY CH 0828 C38g x 30mm CH 0830 ZY CH 0830 C38g x 32mm CH 0832 ZY CH 0832 C38g x 35mm CH 0835 ZY CH 0835 C38g x 40mm CH 0840 ZY CH 0840 C38g x 45mm CH 0845 ZY CH 0845 C3 8g x 50mm CH 0850 ZY CH 0850 C38g x 57mm CH 0857 ZY CH 0857 C38g x 65mm CH 0865 ZY CH 0865 C3

10g x 50mm CH 1050 ZY CH 1050 C310g x 65mm CH 1065 ZY CH 1065 C310g x 75mm CH 1075 ZY CH 1075 C310g x 100mm CH 10100 ZY CH 10100 C3


8g x 20mm CM 0820 ZY CM 0820 C38g x 25mm CM 0825 ZY CM 0825 C38g x 32mm CM 0832 ZY CM 0832 C38g x 35mm CM 0835 ZY CM 0835 C38g x 38mm CM 0838 ZY CM 0838 C38g x 40mm CM 0840 ZY CM 0840 C38g x 45mm CM 0845 ZY CM 0845 C38g x 50mm CM 0850 ZY CM 0850 C38g x 57mm CM 0857 ZY CM 0857 C38g x 63mm CM 0863 ZY CM 0863 C38g x 65mm CH 0865 ZY CH 0865 C310g x 75mm CM 1075 ZY CM 1075 C3

COMBINATION SQUARE / PHILLIPS DRIVE. NO NIBS. ZINC YELLOW & CLASS 3 MECHANICAL GAL.FULL THREAD: 20-25mmPART THREAD: 32-75mm

FULL THREAD: 20-25mmPART THREAD: 28-100mm

Section 1

8

SIZE C3 CODE

8g x 50mm CN 0850 C310g x 65mm CN 1065 C310g x 100mm CN 10100 C3

SIZE CODE

8g x 25mm CN 0825 SS8gx 32mm CN 0832 SS8gx 40mm CN 0840 SS8gx 45mm CN 0845 SS8gx 50mm CN 0850 SS

Square Drive Chipboard Screws - Class 3

Square Drive Chipboard Screws - Stainless

SQUARE DRIVE WITH NIBS, SELF EMBEDDING HEAD. CLASS 3 MECHANICAL GAL

SQUARE DRIVE WITH NIBS SELF EMBEDDING HEAD.FULL THREAD: 25mmPART THREAD: 32-50mm

9

Chipboard Screws - Treated PinePHILLIPS WITH NIBS, SELF EMBEDDING HEAD, CLASS 3 WITH GREEN TOP COAT

TYPE 17 AND OTHER SCREW VARIETIES AVAILABLE

SIZE CODE

8g x 25mm CH 0825 TP8g x 30mm CH 0830 TP8g x 40mm CH 0840 TP8g x 50mm CH 0850 TP

Keeping in line with international standards, Alkon brings an environmentally sound Top Coating system that is 100% Chrome Free, whilst still providing excellent corrosion protection for our fasteners.

This is highly durable coating exhibits exceptional weatheribility when used in exteror applications,

providing a barrier against the treatment chemicals commonly found in treated pine timbers

(ACQ and CCA).

Ideally used as a top coat over mechanically plated fasteners using the Alkote Class 3 and 4 coating system. This provides an extremely corrosion resistant base for the top coat, as well as creating a surface that allows for maximum adhesion.

ALKOTE TP can be used as a top coat for a range of Alkon fasteners.

It is also easily applied over Zinc Electroplate and depending on

the type of passivation required, ALKOTE TP can either finish a

coating that is 100% chrome free or a coating that contains chrome.

The Choice is Yours!

TREATED PINECHIPBOARD SCREWS

WING

Quality Coatings

Quality Coatings

ALKOTE TP

DRILL

DRILLDUO

DRILLDUO

DRILLDUO

DRILL

DECK TIMBER

WITH GREEN TOP COAT

Section 1

10

Super Chipboard ScrewsDRILLED HEAD FOR STEM CAP / PHILLIPS DRIVE WITH NIBS. / ZINC PLATED.

SCREW HEAD STYLES

Examples of screw head styles for easy identification.

PAN HEAD

HEX HEAD

TRUSS HEAD(MUSHROOM)

WAFER HEAD

OVAL HEAD /RAISED CSK

BUGLE HEADWITH NIBS

CHEESEHEAD

COUNTERSUNKWITH NIBS

FLAT PANCAKEHEAD

HEX WASHERHEAD

COUNTERSUNKHEAD

BUGLE HEAD BUTTON HEAD

UNDERCUTCOUNTERSUNK

WHITE CAPS TO SUIT. CALL FOR COLOURS.

SIZE PHILLIPS CODE

4.5mm x 20mm CP 4.520 ZP4.5mm x 25mm CP 4.525 ZP4.5mm x 28mm CP 4.528 ZP4.5mm x 30mm CP 4.530 ZP4.5mm x 35mm CP 4.535 ZP4.5mm x 40mm CP 4.540 ZP4.5mm x 45mm CP 4.545 ZP4.5mm x 50mm CP 4.550 ZP4.5mm x 60mm CP 4.560 ZP4.5mm x 70mm CP 4.570 ZP

11

Particle Board ScrewsCOUNTERSUNK HEAD / PHILLIPS DRIVE / ZINC PLATED.SHARP POINT / COARSE THREAD. IDEAL FOR SOFT TIMBER & PARTICLE BOARDS.

ELECTRO BRASS, FLORENTINE BRONZE, NICKEL PLATE ARE OPTIONAL FINISHES. PLEASE ENQUIRE FOR AVAILABILITY AND PRICE.

SIZE CODE

4g x 1/2 CK 0412 ZP4g x 5/8 CK 0416 ZP

5g x 5/8 CK 0516 ZP5g x 3/4 CK 0520 ZP

6g x 1/2 CK 0612 ZP6g x 5/8 CK 0616 ZP6g x 3/4 CK 0620 ZP6g x 1 CK 0625 ZP6g x 1-1/4 CK 0632 ZP6g x 1-1/2 CK 0638 ZP

8g x 1/2 CK 0812 ZP8g x 5/8 CK 0816 ZP8g x 3/4 CK 0820 ZP8g x 1 CK 0825 ZP8g x 1-1/8 CK 0828 ZP8g x 1-1/4 CK 0832 ZP8g x 1-1/2 CK 0838 ZP8g x 1-3/4 CK 0845 ZP8g x 2 CK 0850 ZP8g x 2-1/4 CK 0857 ZP8g x 2-1/2 CK 0863 ZP8g x 3 CK 0875 ZP

10g x 3/4 CK 1020 ZP10g x 1 CK 1025 ZP10g x 1-1/4 CK 1032 ZP10g x 1-1/2 CK 1038 ZP10g x 2 CK 1050 ZP10g x 2-1/2 CK 1063 ZP10g x 3 CK 1075 ZP

Section 1

12

Director Screws

Lag Screws (Hanger Bolt)

POZI DRIVE / CONFIRMAT STYLE, DRILLED RECESS FOR COLOURED STEM CAP / ZINC PLATED

ZINC PLATED

Euro Screws (Hinge Screw)POZI DRIVE, NICKEL PLATED

TYPE GAUGE SPEED

Self drilling screws for metal 6-10 2500 12-14 1800 Type 17 screws for timber 6-14 1000 Bugle Screws for Drywall Needle Point 3000-4000 Drill Point 2500 Chipboard Screws 1000 Stitching Screws 2500-3000 Thread Forming Screws 800-1000

Recommended Screw-Driving Speeds

As metal properties may vary, the above values should only be used as a guide only.

WHITE CAPS TO SUIT. CALL FOR COLOURS.

SIZE CODE

M5 x 50mm CD 5.0050 ZPM6.3 x 50mm CD 6.3050 ZP

SIZE CODE

5/16 x 75mm (3) CL 5/1676 ZP

SIZE CODE

6.3 x 10mm (7.00mm head diameter) C0 6.310 (7.0D) NP6.3 x 10mm (7.80mm head diameter) C0 6.310 (7.8D) NP

13

TORPEDO

POLYCARBDUOMulti-purpose Wood Screws NanoTORPEDO LOCKING DRIVE WITH UNDERHEAD TORNADO RIBS. NANO COATING.

SIZE CODE

6g x 20mm TOR 0620 NC6g x 25mm TOR 0625 NC8g x 20mm TOR 0820 NC8g x 25mm TOR 0825 NC8g x 32mm TOR 0832 NC8g x 38mm TOR 0838 NC8g x 45mm TOR 0845 NC8g x 50mm TOR 0850 NC8g x 65mm TOR 0865 NC

The future of wood screws

Advanced 'Nano' coatingResistance against treated timbers, acid rain, UV exposure and aquatic salt spray.

Triple helical-angled threadCreates fast grip, pre-mills, and then firmly engagesthe material.All while providing fast drilling time and high pull-out & tensile strength.

Locking 'Torpedo Drive System' enables easy one-hand operation and ultimate screw grip, so youdon't have

to fiddle around!

Underhead 'Tornado Ribs'Keep the wood surface smooth and free of messy cracks or splits.

* Torpedo Driver Bits to fit are available.

Designed for multiple wood types:

- ACQ Treated Timber

- Chipboard- Plywood- Red Oak

- Thermo Timber- Composite- Melamine- MDF And more!

TORPEDO

POLYCARBDUO

Section 1

14

15

WWW.ALKON.COM.AU WWW.ALKON.COM.AU




WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU






WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU


WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU






WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU







WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU


WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU



WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU




WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU


WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU




WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU




WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AUWWW.ALKON.COM.AU

For the latest pricing and info on ourproducts and services go to:

Self Tapping Screws - ZincPAN & COUNTERSUNK HEAD / PHILLIPS DRIVE.

SIZE PAN HEAD CODE CSK HEAD CODE

4g x 1/4 TA 0406 ZP N/A4g x 3/8 TA 0410 ZP TB 0410 ZP4g x 1/2 TA 0412 ZP TB 0412 ZP4g x 5/8 TA 0416 ZP TB 0416 ZP4g x 3/4 TA 0420 ZP TB 0420 ZP4g x 1 TA 0425 ZP TB 0425 ZP

5g x 1/2 N/A TB 0512 ZP5g x 5/8 N/A TB 0516 ZP5g x 5/8NICKEL N/A TB 0516 NI5g x 3/4 N/A TB 0520 ZP5g x 1 N/A TB 0525 ZP

6g x 1/4 TA 0606 ZP N/A6g x 3/8 TA 0610 ZP TB 0610 ZP6g x 1/2 TA 0612 ZP TB 0612 ZP6g x 5/8 TA 0616 ZP TB 0616 ZP6g x 3/4 TA 0620 ZP TB 0620 ZP6g x 1 TA 0625 ZP TB 0625 ZP6g x 1-1/4 TA 0632 ZP TB 0632 ZP6g x 1-1/2 TA 0638 ZP TB 0638 ZP6g x 2 TA 0650 ZP TB 0650 ZP

8g x 1/4 TA 0806 ZP N/A8g x 3/8 TA 0810 ZP TB 0810 ZP8g x 1/2 TA 0812 ZP TB 0812 ZP8g x 5/8 TA 0816 ZP TB 0816 ZP8g x 3/4 TA 0820 ZP TB 0820 ZP8g x 1 TA 0825 ZP TB 0825 ZP8g x 1-1/4 TA 0832 ZP TB 0832 ZP8g x 1-1/2 TA 0838 ZP TB 0838 ZP8g x 1-3/4 TA 0845 ZP TB 0845 ZP8g x 2 TA 0850 ZP TB 0850 ZP

Section 2

16

Self Tapping Screws - ZincPAN & COUNTERSUNK HEAD / PHILLIPS DRIVE.

14G AVAILABLE P. O. A.


10g x 3/8 TA 1010 ZP TB 1010 ZP10g x 1/2 TA 1012 ZP TB 1012 ZP10g x 5/8 TA 1016 ZP TB 1016 ZP10g x 3/4 TA 1020 ZP TB 1020 ZP10g x 1 TA 1025 ZP TB 1025 ZP10g x 1-1/4 TA 1032 ZP TB 1032 ZP10g x 1-1/2 TA 1038 ZP TB 1038 ZP10g x 1-3/4 TA 1045 ZP TB 1045 ZP10g x 2 TA 1050 ZP TB 1050 ZP

N/A TB 0516 NI12g x 1/2 TA 1212 ZP TB 1212 ZP12g x 5/8 TA 1216 ZP TB 1216 ZP12g x 3/4 TA 1220 ZP TB 1220 ZP12g x 1 TA 1225 ZP TB 1225 ZP12g x 1-1/4 TA 1232 ZP TB 1232 ZP12g x 1-1/2 TA 1238 ZP TB 1238 ZP12g x 2 TA 1250 ZP TB 1250 ZP

17

Self Tapping Screws - Stainless SteelPAN & COUNTERSUNK HEAD / PHILLIPS DRIVE.


4g x 3/8 TA 0410 SS TB 0410 SS4g x 1/2 TA 0412 SS TB 0412 SS4g x 5/8 TA 0416 SS TB 0416 SS4g x 3/4 TA 0420 SS TB 0420 SS4g x 1 TA 0425 SS TB 0425 SS

6g x 1/4 TA 0606 SS N/A6g x 3/8 TA 0610 SS N/A6g x 1/2 TA 0612 SS TB 0612 SS6g x 5/8 TA 0616 SS TB 0616 SS6g x 3/4 TA 0620 SS TB 0620 SS6g x 1 TA 0625 SS TB 0625 SS6g x 1-1/4 TA 0632 SS TB 0632 SS6g x 1-1/2 TA 0638 SS TB 0638 SS

8g x 3/8 TA 0810 SS N/A8g x 1/2 TA 0812 SS TB 0812 SS8g x 5/8 TA 0816 SS TB 0816 SS8g x 3/4 TA 0820 SS TB 0820 SS8g x 1 TA 0825 SS TB 0825 SS8g x 1-1/4 TA 0832 SS TB 0832 SS8g x 1-1/2 TA 0838 SS TB 0838 SS8g x 1-3/4 TA 0845 SS TB 0845 SS8g x 2 TA 0850 SS TB 0850 SS

10g x 1/2 TA 1012 SS TB1012 SS10g x 5/8 TA 1016 SS N/A10g x 3/4 TA 1020 SS TB1020 SS10g x 1 TA 1025 SS TB1025 SS10g x 1-1/4 TA 1032 SS TB1032 SS10g x 1-1/2 TA 1038 SS TB1038 SS10g x 1-3/4 TA 1045 SS N/A10g x 2 TA 1050 SS TB1050 SS

14g x 1 TA 1425 SS N/A

Section 2

18

Square Drive Self Tapping Screws - Stainless SteelPAN & COUNTERSUNK HEAD.

WHY SQUARE DRIVE Many countries around the world are changing over to square driveWhy?

Positive drive - Drivers bit is firmly engaged in recess & screws will stick allowing easy access to awkward places without the screw falling off. Drive is firmly engaged with no camout allowing full tightening torque to be applied.

Faster - No fumbling or screws falling off the bit.

Less effort engaging drive means easier operation and reduced risk of RSI.

Less wobble allowing straighter driving. Improved appearance - No camout means no ugly chewed out recess, and improved corrosion resistance on the head.

What is quadrex - Some of our parts have this type of drive. It is a combination square/phillips recess which allows installation with a square driver bit & all the benefits, but can also be removed or reinstalled with a phillips bit for added serviceability.JOIN THE CHANGE NOW!

CONSIDER THE BENEFITS


6g x 1/2 TU 0612 SS TV 0612 SS6g x 5/8 TU 0616 SS TV 0616 SS6g x 3/4 TU 0620 SS TV 0620 SS6g x 3/4 (4g Hd) N/A TV0620(4GHD)SS6g x 1 TU 0625 SS TV 0625 SS6g x 1-1/4 TU 0632 SS TV 0632 SS6g x 1-1/2 TU 0638 SS TV 0638 SS6g x 2 TU 0650 SS TV 0650 SS

8g x 1/2 (U/Cut) TV0812(U/C)SS8g x 1/2 TU 0812 SS TV 0812 SS8g x 5/8 TU 0816 SS TV 0816 SS8g x 3/4 TU 0820 SS TV 0820 SS8g x 1 TU 0825 SS TV 0825 SS8g x 1-1/4 TU 0832 SS TV 0832 SS8g x 1-1/2 TU 0838 SS TV 0838 SS8g x 2 TU 0850 SS TV 0850 SS8g x 2-1/2 TU 0865 SS TV 0865 SS8g x 3 TU 0875 SS TV 0875 SS

10g x 1/2 (U/Cut) TU 1012 SS TV1012(U/C)SS10g x 5/8 TU 1016 SS TV 1016 SS10g x 3/4 TU 1020 SS TV 1020 SS10g x 1 TU 1025 SS TV 1025 SS10g x 1-1/4 TU 1032 SS TV 1032 SS10g x 1-1/2 TU 1038 SS TV 1038 SS10g x 2 TU 1050 SS TV 1050 SS10g x 2-1/2 TU 1065 SS TV 1065 SS10g x 3 TU 1075 SS TV 1075 SS

19

Undercut Self Tapping Screws - Stainless Steel & ZincPHILLIPS DRIVE.

Self Tapping Screws - Pan Head Pilot PointPHILLIPS DRIVE / SQUARE DRIVE, ZINC YELLOW / STAINLESS

SIZE FINISH CODE

6g x 3/8 STAINLESS STEEL TO 0610 SS

8g x 3/8 STAINLESS STEEL TO 0810 SS8g x 1/2 ZINC TO 0812 ZP8g x 1/2 STAINLESS STEEL TO 0812 SS8g x 5/8 STAINLESS STEEL TO 0816 SS8g x 3/4 ZINC TO 0820 ZP8g x 3/4 STAINLESS STEEL TO 0820 SS

10g x 1/2 STAINLESS STEEL TO 1012SS10g x 1/2 8gHd ZINC TO1012(8G)ZP10g x 1/2 8gHd STAINLESS STEEL TO1012(8G)SS10g x 3/4 8gHd ZINC TO1020(8G)ZP10g x 3/4 8gHd STAINLESS STEEL TO1020(8G)SS

SIZE FINISH CODE

PHILLIPS DRIVE6g x 20mm 410 ( HARDENED SS ) STAINLESS STEEL UO 0620 SS6g x 25mm 410 ( HARDENED SS ) STAINLESS STEEL UO 0625 SS6g x 25mm Z/YELLOW UO 0625 ZY8g x 20mm Z/YELLOW UO 0820 ZY8g x 25mm Z/YELLOW UO 0825 ZY8g x 38mm Z/YELLOW UO 0838 ZY

SQUARE DRIVE8g x 20mm Z/YELLOW UP 0820 ZY8g x 25mm Z/YELLOW UP 0825 ZY8g x 38mm Z/YELLOW UP 0838 ZY8g x 50mm UP 0850 SS

Section 2

20

Hex Slot Stitching ScrewsZINC YELLOW / CLASS 3

Pancake Head Screws (Flat Head Screw)

Pan Head Stitching Screws

PHILLIPS DRIVE, ZINC YELLOW.


SIZE FINISH CODE

8g x 15mm Z/YELLOW EG 0815 ZY8g x 15mm CLASS 3 EG 0815 C310g x 20mm Z/YELLOW EG 1020 ZY

SIZE CODE

SELF PIERCING DRYWALL POINT8g x 16mm EF 0816 ZY10g - 16 x 16mm EF 1016 ZY

SELF DRILLING POINT8g -18 x 16mm DF 08-1816 ZY10g - 16 x 16mm DF 10-1616 ZY

SIZE CODE

7g x 12mm EC 0712 ZY7g x 20mm EC 0720 ZY7g x 25mm EC 0725 ZY7g x 30mm EC 0730 ZY7g x 40mm EC 0740 ZY7g x 50mm EC 0750 ZY

21

Drywall Screws

Drywall Screws Collated

BUGLE HEAD, PHILLIPS DRIVE, ZINC YELLOW

BUGLE HEAD, PHILLIPS DRIVE, ZINC YELLOW.

FULL THREAD: 20-50mmPART THREAD: 62-100mm

SIZE CODE

FINE THREAD6g x 20mm EA 0620 ZY6g x 25mm EA 0625 ZY6g x 32mm EA 0632 ZY6g x 41mm EA 0641 ZY6g x 45mm EA 0645 ZY7g x 20mm EA 0720 ZY7g x 25mm EA 0725 ZY7g x 30mm EA 0730 ZY7g x 40mm EA 0740 ZY7g x 45mm EA 0745 ZY7g x 50mm EA 0750 ZY8g x 45mm EA 0845 ZY8g x 62mm EA 0862 ZY8g x 75mm EA 0875 ZY10g x 38mm EA 1038 ZY10g x 100mm EA 10100 ZY

COARSE THREAD6g x 20mm EB 0620 ZY6g x 25mm EB 0625 ZY6g x 32mm EB 0632 ZY7g x 25mm EB 0725 ZY7g x 30mm EB 0730 ZY7g x 40mm EB 0740 ZY

SIZE CODE

DRYWALL POINT6g x 25mm EZ 0625 ZY6g x 32mm EZ 0632 ZY

SELF DRILLING POINT6g x 25mm DZ 0625 ZY

Section 2

22

__ Add the following letters to the code for the required finish. ZY = Zinc Yellow. BO= Black. C3 = Class 3.

Button Head Stitching ScrewsPHILLIPS DRIVE.

SIZE CODE

8g x 12mm ED 0812__8g x 15mm ED 0815__8g x 17mm ED 0817__8g x 20mm ED 0820__8g x 25mm ED 0825__8g x 32mm ED 0832__

Cement Sheet Screws - Phillips DriveCOUNTERSUNK SELF EMBEDDING HEAD ZINC YELLOW & CLASS 3 MECHANICAL GAL.

SIZE Z/Y CODE C3 CODE

SELF PIERCING DRYWALL POINT8g x 20mm EE 0820 ZY EE 0820 C38g x 30mm EE 0830 ZY EE 0830 C3

SELF DRILLING POINT8g -18 x 20mm DM 08-1820 ZY DM 08-1820 C38g -18 x 25mm DM 08-1825 ZY DM 08-1825 C38g -18 x 30mm DM 08-1830 ZY DM 08-1830 C3 23

Section 3

ALKON OFFER A ALKON OFFER A ALKON OFFER A SIMPLE & EASY SIMPLE & EASY SIMPLE & EASY FASTENER TRAINING FASTENER TRAINING FASTENER TRAINING MANUAL AND A MANUAL AND A MANUAL AND A POCKET SIZE SCREW & POCKET SIZE SCREW & POCKET SIZE SCREW & RIVET MEASURING, ID RIVET MEASURING, ID RIVET MEASURING, ID & CONVERSION CARD & CONVERSION CARD & CONVERSION CARD TO ASSIST YOUR STAFFTO ASSIST YOUR STAFFTO ASSIST YOUR STAFF

Self Drilling Screws - Hex Washer HeadZINC YELLOW, CLASS 4, NEO OPTION.

__ Add the following letters to the code for the required finish.ZY = Zinc Yellow. C4 = Class 4. NC4 = Class 4 with Neo Washer.

*FOR PAINTED HEAD PRICING REFER TO OUR WEBSITE

*CYCLONE ASSEMBLIES AVAILABLE. P.O.A.

SIZE CODE

8g -18 x 12mm DH 08-1812__

10g -16 x 16mm DH 10-1616__10g -24 x 16mm DH 10-2416__10g -16 x 25mm DH 10-1625__

12g -14 x 20mm DH 12-1420__12g -24 x 20mm DH 12-2420__12g -14 x 25mm DH 12-1425__12g -24 x 30mm DH 12-2430__12g -14 x 35mm DH 12-1435__12g -14 x 45mm DH 12-1445__12g -14 x 55mm DH 12-1455__12g -14 x 65mm DH 12-1465__12g -14 x 75mm DH 12-1475__

14g -10 x 22mm DH 14-1022__14g -20 x 22mm DH 14-2022__14g -10 x 42mm DH 14-1042__14g -10 x 50mm DH 14-1050__14g -10 x 65mm DH 14-1065__14g -10 x 75mm DH 14-1075__14g -10 x 90mm DH 14-1090__14g -10 x 115mm DH 14-10115__14g -10 x 135mm DH 14-10135__14g -10 x 150mm DH 14-10150__

Section 3

24

Self Drilling Screws - Series 500

Self Drilling Screws - Hex Washer Head

Self Drilling Screws - Button Head

CLASS 3, NEO OPTION.

STAINLESS STEEL GRADE 304 BI-METAL, NEO OPTION.

PHILLIPS DRIVE, ZINC YELLOW & CLASS 3

SIZE C3 CODE NC3 CODE

HEX WASHER HEAD12g - 24 x 32mm DH 12-2432500 C3 DH12-2432500NC312g - 24 x 50mm DH 12-2450500 C3 DH12-2450500NC312g - 24 x 65mm DH 12-2465500 C3 DH12-2465500NC3WAFER HEAD12g - 24 x 32mm DK 12-2432500 C3 N/A

SIZE BI- METAL STAINLESS CODE

10 - 16 x 16mm DH10-1616BSS10 - 16 x 25mm DH10-1625BSS12 - 14 x 20mm DH12-1420BSS12 - 14 x 35mm DH12-1435BSS12 - 14 x 45mm DH12-1445BSS14 - 10 x 22mm DH14-1022BSS14 - 10 x 50mm DH14-1050BSS


8g - 18 x 12mm DL 08-1812 ZY DL 08-1812 C38g -18 x 16mm DL 08-1816 ZY DL 08-1816 C38g -18 x 20mm DL 08-1820 ZY DL 08-1820 C38g -18 x 25mm DL 08-1825 ZY DL 08-1825 C38g -18 x 30mm DL 08-1830 ZY DL 08-1830 C3

25

Self Drilling Screws - Hex Washer Head

Multi-purpose Roofing Screws (Self Drilling)

DOUBLE GRIP WITH NEO WASHER CLASS 3 MECHANICAL GAL.

FOR FITTING ROOF SHEETING INTO TIMBER, THIN METAL BATTENS & STEEL PURLINS. NEO. CLASS 4.



WING

Quality Coatings

Quality Coatings

ALKOTE TP

DRILL

DRILLDUO

DRILLDUO

DRILLDUO

DRILL

DECK TIMBER

SIZE CODE

12g - 14 x 35mm DH 12-1435DGN C312g - 14 x 45mm DH 12-1445DGN C3

SIZE CODE

12g - 11 x 50mm (14g - 14 Top Thread) DH 12-1150DUO NC4

Multi-purpose Polycarb ScrewsDRILLING SCREW FOR POLYCARB & FIBREGLASS ROOFING INTO STEEL & TIMBER. 23MM EPDM WASHER. CLASS 4 MECHANICAL GAL

*PENDING DESIGN FINALISATION

*CYCLONE ASSEMBLIES AVAILABLE. P.O.A.

The all-in-one solution for your roofing fastener needs.

Quick & Simple. Reduced screw skidding, water entry & end load pressure.

Unique 'Spiral Flute' to minimize wood shavings & excess swarf.

The DUO's 'Reduced Point' will effortlessly pierce the roof profile and drill right into the batten below. All in one go!

WING

Quality Coatings

Quality Coatings

ALKOTE TP

DRILL

DRILLDUO

DRILLDUO

DRILLDUO

DRILL

DECK TIMBER

This multi-purpose roofing screw is

designed to fix the crest of corrugated & square rib roof profiles to steel purlins, thin metal and

timber battens with ease

TORPEDO

POLYCARBDUO

Keeping in line with our continued strive for innovation & quality, Alkon is putting this cutting-edge product through rigorous testing to ensure you receive a product that we are proud to say is an AK Fastener!

*COMING SOON

Section 3

26

Self Drilling Screws - Bugle Head

Self Drilling Screws - Pan Head



Self Drilling Screws - Wafer HeadPHILLIPS DRIVE, ZINC YELLOW & CLASS 3.


10g -16 x 16mm DK 10-1616 ZY DK 10-1616 C310g -24 x 16mm DK 10-2416 ZY DK 10-2416 C310g -16 x 22mm DK 10-1622 ZY DK 10-1622 C310g -24 x 22mm DK 10-2422 ZY DK 10-2422 C310g -16 x 30mm DK 10-1630 ZY DK 10-1630 C310g -24 x 30mm DK 10-2430 ZY DK 10-2430 C3

SIZE CODE

6g x 25mm DD 0625 ZY6g x 25mm DZ 0625 ZY6g x 32mm DD 0632 ZY6g x 45mm DD 0645 ZY

SIZE CODE

6g - 20 x 10mm DA 06-2010 ZY6g - 20 x 12mm DA 06-2012 ZY6g - 20 x 16mm DA 06-2016 ZY6g - 20 x 20mm DA 06-2020 ZY6g - 20 x 25mm DA 06-2025 ZY8g - 18 x 12mm DA 08-1812 ZY8g - 18 x 16mm DA 08-1816 ZY8g - 18 x 20mm DA 08-1820 ZY8g - 18 x 25mm DA 08-1825 ZY

27

Self Drilling Screws - CountersunkPHILLIPS DRIVE, ZINC YELLOW & CLASS 3.

Self Drilling Screws - Winged CountersunkPHILLIPS DRIVE, NIBBED, ZINC YELLOW & CLASS 3.

*8G SCREWS FEATURE NIBS UNDER HEAD

Undercut Self Drilling Screws - ZincPHILLIPS DRIVE, 8 GAUGE HEAD


6g - 20 x 50mm DC 06-2050 ZY N/A8g - 18 x 30mm N/A DC 08-1830 C310g - 16 x 35mm DC 10-1635 ZY DC 10-1635 C310g - 16 x 40mm DC 10-1640 ZY DC 10-1640 C310g - 16 x 45mm DC 10-1645 ZY DC 10-1645 C310g - 16 x 50mm DC 10-1650 ZY DC 10-1650 C310g - 16 x 60mm DC 10-1660 ZY DC 10-1660 C310g - 16 x 70mm DC 10-1670 ZY DC 10-1670 C3


6g - 20 x 16mm DB 06-2016 ZY N/A6g - 20 x 20mm DB 06-2020 ZY N/A6g - 20 x 25mm DB 06-2025 ZY N/A6g - 20 x 40mm DB 06-2040 ZY N/A6g - 20 x 50mm DB 06-2050 ZY N/A*8g -18 x 20mm DM 08-1820 ZY DM 08-1820 C3*8g-18 x 25mm DM 08-1825 ZY DM 08-1825 C3*8g-18 x 30mm DM 08-1830 ZY DM 08-1830 C310g - 16 x 30mm DB 10-1630 ZY DB 10-1630 C310g - 24 x 25mm DB 10-2425 ZY DB 10-2425 C310g - 24 x 30mm DB 10-2430 ZY DB 10-2430 C310g - 16 x 40mm DB 10-1640 ZY DB 10-1640 C310g - 24 x 40mm DB 10-2440 ZY DB 10-2440 C310g - 16 x 50mm DB 10-1650 ZY DB 10-1650 C310g - 24 x 50mm DB 10-2450 ZY DB 10-2450 C310g - 24 x 65mm DB 10-2465 ZY DB 10-2465 C3

SIZE CODE

10g - 16 x 16mm (8g HD) DB 10-1616 (8GHD)ZP

Section 3

28

GAUGE DIAMETER (MM) THREADS PER INCH MAX DRILLING CAPACITY (MM)

6 3.5 20 2.3 8 4.2 18 2.5 10 4.8 16 4.5 10 4.8 24 4.5 12 5.5 14 4.5 12 5.5 24 5.3 12 (series 500) 5.5 24 10 14 6.3 10 3.0 14 6.3 20 6.3

As metal properties may vary, the above values should only be used as a guide only.

Self Drilling Security Screws - Pentagon HeadNEOPRENE WASHER. GRADE 410 STAINLESS STEEL BODY W / GRADE 304 CAP.

MAGNETIC SOCKET BITS AVAILABLE

SIZE CODE

14g - 14 x 22mm DH 14-1422 PEN SS

The solid solution to your security fastener needs.

Grade 304 Stainless CapFor top corrosion resistance & constant shine.

Grade 410 Stainless BodyFor an active magnetic hold & maximum strength.

Unique 5 Sided Washer Head means no ordinary

3/8 spanner, shifter or socket will fit!

Self Drilling Point & Neoprene WasherEnsure a fast, secure, & solid installation.

Our 3/8 Magnetic Socket

Is the only thing that will get a hold on this screw.

Australian Patent No. 2011100341

The solid solution to your

PENTAGONSECURITY SCREWS

Drilling capacity of Self Drilling screws for metal

29

Type 17 Thread Cutting Screws - Hex Washer HeadZINC YELLOW, CLASS 4, NEO OPTION.

__ Add the following letters to the code for the required finish.ZY = Zinc Yellow. C4 = Class 4. NC4 = Class 4 with Neo Washer


FULL THREAD: 20-32mm PART THREAD: 40-150mm

SIZE CODE

10g -12 x 20mm XO 1020__10g -12 x 25mm XO 1025__

12g -11 x 25mm XO 1225__12g -11 x 30mm XO 1230__12g -11 x 35mm XO 1235__12g -11 x 40mm XO 1240__12g -11 x 45mm XO 1245__12g -11 x 50mm XO 1250__12g -11 x 65mm XO 1265__

14g -10 x 25mm XO 1425__14g -10 x 50mm XO 1450__14g -10 x 65mm XO 1465__14g -10 x 75mm XO 1475__14g -10 x 90mm XO 1490__14g -10 x 100mm XO 14100__14g -10 x 115mm XO 14115__14g -10 x 125mm XO 14125__14g -10 x 150mm XO 14150__

Section 4

30

Type 17 Thread Cutting Screws - Hex Washer HeadDOUBLE GRIP WITH NEO WASHER CLASS 3 MECHANICAL GAL.

Type 17 Thread Cutting Screws - Wafer HeadPHILLIPS DRIVE, ZINC YELLOW & CLASS 3.

WHY AN AK SCREW?

Our products are chosen for consistent quality based on over 40 years of Fastener experience.

SELF DRILLING SCREWS

Type 17 Split Point shank slot means easier and true entry into timber and roof sheet and reduced thread entry angle and super sharp point ensures easier initial start and driving effort.

Across flat hex dimensions adjusted to allow for Class 3 & 4 Mech Galv plating thickness so sockets will always fit.

Extra care with all Drill points to maintain exacting standards of drilling performance. Full test certification is supplied with every batch from our leading supplier, and sold with total guarantee of satisfaction

All Alkote Mechanical Galv plating strictly in accordance with Spec-AS 3566

TYPE 17



10g - 12 x 25mm XQ 1025 ZY XQ 1025 C310g - 12 x 30mm XQ 1030 ZY XQ 1030 C310g - 12 x 35mm XQ 1035 ZY XQ 1035 C310g - 12 x 45mm XQ 1045 ZY XQ 1045 C3

SIZE CODE

12g -11 x 50mm XO 1250DGN C312g -11 x 65mm XO 1265DGN C3

31


6g - 18 x 16mm XB 0616 ZY XB 0616 C36g - 18 x 20mm XB 0620 ZY XB 0620 C36g - 18 x 25mm XB 0625 ZY XB 0625 C3

8g - 15 x 20mm XB 0820 ZY XB 0820 C38g - 15 x 25mm XB 0825 ZY XB 0825 C3

10g - 12 x 30mm XB 1030 ZY XB 1030 C310g - 12 x 40mm XB 1040 ZY XB 1040 C310g - 12 x 50mm XB 1050 ZY XB 1050 C310g - 12 x 75mm XB 1075 ZY XB 1075 C3

SQUARE DRIVE10g - 12 x 30mm XB 1030 SQZY N/A10g - 12 x 40mm XB 1040 SQZY N/A10g - 12 x 50mm XB 1050 SQZY XB 1050 SQC310g - 12 x 75mm XB 1075 SQZY N/A


14g - 10 x 50mm XS 14050 ZY XS 14050 C314g - 10 x 75mm XS 14075 ZY XS 14075 C314g - 10 x 100mm XS 14100 ZY XS 14100 C314g - 10 x 125mm XS 14125 C314g - 10 x 150mm XS 14150 C314g - 10 x 200mm XS 14200 C3

Type 17 Thread Cutting Screws - Countersunk Head

Type 17 Batten Screws - Countersunk Bugle Head Self Embedding

PHILLIPS DRIVE, ZINC YELLOW & CLASS 3.

5MM HEX DRIVE, ZINC YELLOW & CLASS 3 MECHANICAL GAL.

FULL THREAD: 20-50mm PART THREAD: 75mm

Section 4

32


10g - 12 x 20mm TX 1020 ZY TX 1020 C310g - 12 x 25mm TX 1025 ZY TX 1025 C310g - 12 x 40mm TX 1040 ZY TX 1040 C3

25mm BITS TO SUIT FZ TRILOBE

SIZE 304/CODE 316/CODE

14g - 10 x 50mm XS 14050 SS XS 14050316 SS14g - 10 x 75mm XS 14075 SS XS 14075316 SS14g - 10 x 1000mm XS 14100 SS XS 14100316 SS

SIZE 304/CODE 316/CODE

8g - 10 x 50mm XU 08-1050 SS8g - 10 x 65mm XU 08-1065 SS10g - 12 x 50mm XU 10-1250 SS XU 10-1250316 SS10g - 12 x 65mm XU 10-1265 SS

Type 17 Batten Screws - Countersunk Bugle Head Self Embedding5MM HEX DRIVE, STAINLESS STEEL. 304 / 316

Type 17 Security Screws - Pan HeadTRI LOBULAR DRIVE, ZINC YELLOW & CLASS 3 MECHANICAL GAL.

Type 17 Decking Screws - Countersunk Self Embedding HeadSQUARE DRIVE, STAINLESS STEEL. 304 / 316

33

Metal Thread Machine Screws - Pan Head * AS 1427PHILLIPS DRIVE, ZINC PLATED.

*SOME COUNTERSUNK AVAILABLE. P.O.A.

SIZE PAN CODE

M3 x 5mm MA 0305 ZPM3 x 6mm MA 0306 ZPM3 x 8mm MA 0308 ZPM3 x 10mm MA 0310 ZPM3 x 12mm MA 0312 ZPM3 x 16mm MA 0316 ZPM3 x 20mm MA 0320 ZPM3 x 25mm MA 0325 ZPM4 x 6mm MA 0406 ZPM4 x 8mm MA 0408 ZPM4 x 10mm MA 0410 ZPM4 x 12mm MA 0412 ZPM4 x 16mm MA 0416 ZPM4 x 20mm MA 0420 ZPM4 x 25mm MA 0425 ZPM4 x 30mm MA 0430 ZPM5 x 8mm MA 0508 ZPM5 x 10mm MA 0510 ZPM5 x 12mm MA 0512 ZPM5 x 16mm MA 0516 ZPM5 x 20mm MA 0520 ZPM5 x 25mm MA 0525 ZPM5 x 30mm MA 0530 ZPM5 x 35mm MA 0535 ZPM5 x 40mm MA 0540 ZPM5 x 50mm MA 0550 ZPM6 x 10mm MA 0610 ZPM6 x 12mm MA 0612 ZPM6 x 16mm MA 0616 ZPM6 x 20mm MA 0620 ZPM6 x 25mm MA 0625 ZPM6 x 30mm MA 0630 ZPM6 x 35mm MA 0635 ZPM6 x 40mm MA 0640 ZPM6 x 45mm MA 0645 ZPM6 x 50mm MA 0650 ZP

Section 5

34

Metal Thread Handle Screws - Mushroom HeadPHILLIPS DRIVE, ZINC PLATED.

SIZE CODE

METRICM4 x 16mm MD0416ZPM4 x 20mm MD0420ZPM4 x 22mm MD0422ZPM4 x 25mm MD0425ZPM4 x 28mm MD0428ZPM4 x 30mm MD0430ZPM4 x 32mm MD0432ZPM4 x 35mm MD0435ZPM4 x 40mm MD0440ZPM4 x 45mm MD0445ZP

IMPERIAL5/32 x 5/8 MD5/3216ZP5/32 x 3/4 MD5/3220ZP5/32 x 1 MD5/3225ZP5/32 x 1-1/8 MD5/3228ZP5/32 x 1-1/4 MD5/3232ZP5/32 x 1-3/8 MD5/3235ZP5/32 x 1-1/2 MD5/3238ZP5/32 x 1-3/4 MD5/3245ZP5/32 x 2 MD5/3250ZP

Hex Washer Head Furniture ScrewsUNDERHEAD SERRATIONS, BLACK FINISH.

SIZE CODE

M6 x 16mm BV0616BOM6 x 20mm BV0620BOM6 x 25mm BV0625BOM6 x 30mm BV0630BOM6 x 40mm BV0640BO

35

Hex Head Set Screws - Full Thread - AS 1111

Flat Head Furniture Screws

MILD STEEL, ZINC PLATED.

HEX DRIVE, ELECTRO BRASS / NICKEL / PLAIN.

SIZE CODE

M6 x 12mm BE0612ZPM6 x 16mm BE0616ZPM6 x 20mm BE0620ZPM6 x 25mm BE0625ZPM6 x 30mm BE0630ZPM6 x 40mm BE0640ZPM8 x 16mm BE0816ZPM8 x 20mm BE0820ZPM8 x 25mm BE0825ZPM8 x 30mm BE0830ZP

SIZE CODE

M6 x 12mm MT06012EBM6 x 16mm MT06014EB*M6 x 20mm MT06020PL*M6 x 25mm MT06025EBM6 x 30mm MT06030NIM6 x 40mm MT06040EBM6 x 50mm MT06050EBM6 x 60mm MT06060EBM6 x 70mm MT06070EBM6 x 80mm MT06080EBM6 x 90mm MT06090EBM6 x 100mm MT06100EB Available in NickelNut Brass Plated*M6 x 17mm Diam NZ0612E

Section 5

36

Hex Washer Assembled Screws (SEMS)

Nuts - Hexagon

AUTO MOTIVE APPLICATIONS.

COLD FORMED. ZINC PLATED.

SIZE CODE

METRIC - AS 1112.1M3 x 0.5p ND03ZPM4 x 0.7p ND04ZPM5 x 0.8p ND05ZPM6 x 1.0p ND06ZPM8 x 1.25p ND08ZPM10 x 1.5p ND10ZPM12 x 1.75p ND12ZPM16 x 2.0p ND16ZPM20 x 2.5p ND20ZPM24 x 3.0p ND24ZPM30 x 3.5p ND30ZP

IMPERIAL - AS 24511/8 BSW NA1/8ZP5/32 BSW NA5/32ZP3/16 BSW NA3/16ZP1/4 BSW NA1/4ZP5/16 BSW NA5/16ZP3/8 BSW NA3/8ZP

SIZE FINISH CODE

14g x 20mm BLACK BT142018BO14g x 20mm YELLOW BT142018ZYM6 x 18mm BLACK BT061814BOM6 x 18mm YELLOW BT061814ZY

37

Nuts - Flange Serrated Locking

Nuts - Nylon Insert Locking

DIN 6923. ZINC YELLOW PLATED.

DIN 985. ZINC YELLOW PLATED.

FLAT AND MUDGUARD WASHERS AVAILABLE P.O.A.

SIZE CODE

M4 x 0.7p NP04ZYM5 x 0.8p NP05ZYM6 x 1.0p NP06ZYM8 x 1.25p NP08ZYM10 x 1.5p NP10ZYM12 x 1.75p NP12ZY

SIZE CODE

METRICM3 x 0.5p NK 03 ZYM4 x 0.7p NK 04 ZYM5 x 0.8p NK 05 ZYM6 x 1.0p NK 06 ZYM8 x 1.25p NK 08 ZYM10 x 1.5p NK 10 ZY

M8 x 1.25p Stainless NK 08 SS

IMPERIAL3/16 UNC NI 3/16 ZY1/4 UNC NI 1/4 ZY

Section 5

38

Nuts - Wing

Nuts - Tee Nuts for Timber

COLD FORMED, ZINC PLATED.

COLD FORMED, 4 PRONG, ZINC PLATED.

SIZE CODE

METRICM3 x 0.5p NT 03 ZPM4 x 0.7p NT 04 ZPM5 x 0.8p NT 05 ZPM6 x 1.0p NT 06 ZPM8 x 1.25p NT 08 ZP

IMPERIAL3/16 NT 3/16 ZP1/4 NT 1/4 ZP5/16 NT 5/16 ZP

SIZE DIAM X BARREL LENGTH CODE

METRICM4 15mm x 7.0mm NN0407ZPM5 15mm x 7.0mm NN0507ZPM6 18mm x 7.0mm NN0607ZPM8 22mm x 9.0mm NN0809ZPM8 22mm x 16mm NN0816ZPM10 25mm x 11mm NN1011ZP

IMPERIAL3/16 18mm x 7.0mm NN3/1607ZP1/4 18mm x 7.0mm NN1/407ZP5/16 22mm x 9.0mm NN5/1609ZP5/16 22mm x 16mm NN5/1616ZP3/8 25mm x 11mm NN3/811ZP

39

Threaded RodMILD STEEL - GRADE 4.6, ZINC PLATED, GALVANISED, STAINLESS STEEL

SIZE ZINC CODE GAL CODE 304 CODE 316 CODE

METRICM4 x 1 Metre AC 041000 SS AC 041000(316) SSM5 x 1 Metre AC 051000 SS AC 051000(316) SSM6 x 1 Metre AC 061000 ZP AC 061000 SS AC 061000(316) SSM8 x 1 Metre AC 081000 ZP AC 081000 SS AC 081000(316) SSM10 x 1 Metre AC 101000 ZP AC 101000 GA AC 101000 SS AC 101000(316) SSM12 x 1 Metre AC 121000 ZP AC 121000 GA AC 121000 SS AC 121000(316) SSM16 x 1 Metre AC 161000 ZP AC 161000 GA AC 161000 SS AC 161000(316) SSM20 x 1 Metre AC 201000 ZP AC 201000 GA AC 201000 SS AC 201000(316) SSM24 x 1 Metre AC 241000 ZP AC 241000 GA AC 241000 SS AC 241000(316) SSM30 x 1 Metre AC 301000 ZP AC 301000 GA

M6 x 3 Metre AC 063000 ZPM8 x 3 Metre AC 083000 ZPM10 x 3 Metre AC 103000 ZP AC 103000 GAM12 x 3 Metre AC 123000 ZP AC 123000 GAM16 x 3 Metre AC 163000 ZP AC 163000 GAM20 x 3 Metre AC 203000 ZP AC 203000 GA

IMPERIAL (BSW)1/4" x 2 ft AA 1/40610 ZP5/16" x 2 ft AA 5/160610 ZP3/8" x 2 ft AA 3/80610 ZP1/2" x 2 ft AA 1/20610 ZP5/8" x 2 ft AA 5/80610 ZP3/4" x 2 ft AA 3/40610 ZP

1/4" x 3 ft AA 1/40915 ZP5/16" x 3 ft AA 5/160915 ZP3/8" x 3 ft AA 3/80915 ZP1/2" x 3 ft AA 1/20915 ZP5/8" x 3 ft AA 5/80915 ZP3/4" x 3 ft AA 3/40915 ZP1" x 3 ft AA 10915 ZP

5/16" x 12 ft AA 5/163660 ZP3/8" x 12 ft AA 3/83660 ZP1/2" x 12 ft AA 1/23660 ZP5/8" x 12 ft AA 5/83660 ZP3/4" x 12 ft AA 3/43660 ZP

Section 5

40

41





WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU






WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU


WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU






WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU







WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU


WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU



WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU




WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU


WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU




WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU




WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU



Masonry Anchors - Sleeve Flange NutZINC YELLOW

Masonry Anchors CountersunkNO.3 POZI DRIVE, ZINC YELLOW

SIZE FINISH CODE

M6.5 x 36mm Z/YELLOW AM06.536ZYM6.5 x 56mm Z/YELLOW AM06.556ZYM6.5 x 75mm Z/YELLOW AM06.575ZYM8 x 40mm Z/YELLOW AM0840ZYM8 x 60mm Z/YELLOW AM0860ZYM8 x 85mm Z/YELLOW AM0885ZYM10 x 50mm Z/YELLOW AM10050ZYM10 x 60mm Z/YELLOW AM10060ZYM10 x 75mm Z/YELLOW AM10075ZYM10 x 97mm Z/YELLOW AM10097ZYM10 x 125mm Z/YELLOW AM10125ZYM12 x 60mm Z/YELLOW AM12060ZYM12 x 75mm Z/YELLOW AM12075ZYM12 x 100mm Z/YELLOW AM12100ZYM12 x 130mm Z/YELLOW AM12130ZYM16 x 65mm Z/YELLOW AM16065ZYM16 x 111mm Z/YELLOW AM16111ZYM16 x 147mm Z/YELLOW AM16147ZY

SIZE FINISH CODE

M6.5 x 37mm Z/YELLOW AN 06.537 ZYM6.5 x 55mm Z/YELLOW AN 06.555 ZYM6.5 x 75mm Z/YELLOW AN 06.575 ZYM8 x 60mm Z/YELLOW AN 0860 ZYM8 x 85mm Z/YELLOW AN 0885 ZYM10 x 75mm Z/YELLOW AN 1075 ZYM10 x 102mm Z/YELLOW AN 10102 ZYM10 x 120mm Z/YELLOW AN 10120 ZY

Section 6

42

Masonry Anchors - Sleeve Flange NutSTAINLESS STEEL - GRADE 316

Masonry Anchors - Sleeve Flange NutMECHANICAL GAL.

SIZE FINISH CODE

M10 x 40mm MECH GAL AM10040GAM10 x 50mm MECH GAL AM10050GAM10 x 60mm MECH GAL AM10060GAM10 x 75mm MECH GAL AM10075GAM10 x 97mm MECH GAL AM10097GAM12 x 60mm MECH GAL AM12060GAM12 x 75mm MECH GAL AM12075GAM12 x 100mm MECH GAL AM12100GAM12 x 130mm MECH GAL AM12130GAM16 x 65mm MECH GAL AM16065GAM16 x 111mm MECH GAL AM16111GAM16 x 147mm MECH GAL AM16147GA

SIZE FINISH CODE

M8 x 40mm STAINLESS AM0840 SSM8 x 65mm STAINLESS AM0865 SS

M10 x 50mm STAINLESS AM10050 SSM10 x 77mm STAINLESS AM10077 SSM10 x 97mm STAINLESS AM10097 SS

M12 x 60mm STAINLESS AM12060 SSM12 x 75mm STAINLESS AM12075 SSM12 x 97mm STAINLESS AM12097 SS

43

Masonry Anchor (Drop in)

Speed Wall Plugs

Wall Plug

ZINC YELLOW PLATED.

METAL & NYLON.

GREEN 35MM LONG 7.0MM DRILL SIZE.

ALKON HAS ITS OWN QUALITY ASSURANCE AND TESTING FACILITIES AS IS CONSTANTLY MONITORING PRODUCTS TO ENSURE CONSISTENT PERFORMANCE.

SIZE CODE

M6 x 8mm O.D. AR HSDIM 06 M8 x 10mm O.D. AR HSDIM 08M10 x 12mm O.D. AR HSDIM 10M12 x 15mm O.D. AR HSDIM 12

SIZE CODE

METAL AJ 08 ZPNYLON AJ 08 NY

SIZE CODE

35mm NYLON QDGREEN35

Section 6

44

RivetsALUMINIUM / STEEL STEM

**REFER TO COLOUR MATRIX FOR AVAILABILITY

Nail in Plugs

SIZE CODE

ROUND HEAD5.0mm x 25mm AK 05255.0mm x 40mm AK 05406.5mm x 25mm AK 6.5256.5mm x 40mm AK 6.540

MUSHROOM HEAD6.5mm x 25mm AG 6.5256.5mm x 38mm AG 6.5386.5mm x 50mm AG 6.550

DIAMETER LENGTH (mm) MAX GRIP CODE

1/8 4.7mm 1.6mm RA 4-1 AS1/8 6.3mm 3.2mm RA 4-2 AS1/8 6.3mm 3.2mm **4-2 COLOURED1/8 7.9mm 4.8mm RA 4-3 AS1/8 7.9mm 4.8mm 4-3 COLOURED1/8 9.5mm 6.4mm RA 4-4 AS1/8 9.5mm 6.4mm **4-4 COLOURED1/8 11.4mm 8.0mm RA 4-5 AS1/8 12.7mm 9.5mm RA 4-6 AS1/8 12.7mm 9.5mm **4-6 COLOURED1/8 16.1mm 12.7mm RA 4-8 AS5/32 6.3mm 3.2mm RA 5-2 AS5/32 10.4mm 6.4mm RA 5-4 AS5/32 10.4mm 6.4mm **5-4 COLOURED5/32 13.5mm 9.5mm RA 5-6 AS5/32 19.0mm 16.0mm RA 5-10 AS3/16 9.5mm 4.8mm RA 6-3 AS3/16 11.0mm 6.4mm RA 6-4 AS3/16 14.2mm 9.5mm RA 6-6 AS3/16 17.9mm 12.7mm RA 6-8 AS3/16 21.00mm 16.0mm RA 6-10 AS

45

RivetsALL STEEL

Rivets Large Flange

Rivets

ALUMINIUM / STEEL STEM

ALL STAINLESS STEEL


1/8 6.3mm 3.2mm RA 4-2 ST1/8 7.9mm 4.8mm RA 4-3 ST1/8 9.5mm 6.4mm RA 4-4 ST1/8 12.7mm 9.5mm RA 4-6 ST5/32 10.4mm 6.4mm RA 5-4 ST


1/8 9.5mm 6.4mm RE 4-4LARGE AS1/8 12.7mm 9.5mm RE 4-6LARGE AS5/32 10.4mm 6.4mm RE 5-4LARGE AS5/32 13.5mm 9.5mm RE 5-6LARGE AS3/16 11.0mm 6.4mm RE 6-4LARGE AS3/16 17.9mm 12.7mm RE 6-8LARGE AS


1/8 6.3mm 1.6mm RA 4-2 SS1/8 7.9mm 3.2mm RA 4-3 SS1/8 9.5mm 4.8mm RA 4-4 SS1/8 12.7mm 6.4mm RA 4-6 SS5/32 10.4mm 6.4mm RA 5-4 SS5/32 13.5mm 9.5mm RA 5-6 SS3/16 11.0mm 6.4mm RA 6-4 SS3/16 14.2mm 9.5mm RA 6-6 SS

Section 6

46

DRIVER BITS

PART NO. DESCRIPTION

PHILLIPS DRIVEFM1/4251AK No 1 x 25mm long FM1/4252AK No 2 x 25mm longFM1/4502AK No 2 x 50mm longFM1/4752AK No 2 x 75mm long FM1/4902AK No 2 x 90mm longFM1/41002AK No 2 x 100mm long FM1/41502AK No 2 x 150mm longSERRATED TIPFM1/4252NSAK No 2 x 25mm longFM1/4502NSAK No 2 x 50mm longDOUBLE ENDEDFT1/4452AK No 2 x 45mm longPOZI DRIVEFN1/4251AK No 1 x 25mm longFN1/4252AK No 2 x 25mm longFN1/4502AK No 2x 50mm long SQUARE DRIVEFR1/4251AK No 2 x 25mm longFR1/4252AK No 2 x 25mm longFR1/4502AK No 2 x 50mm longFR1/4752AK No 2 x 75mm longFR1/41002AK No 2 x 100mm longFR1/41502AK No 2 x 150mm long5MM HEX DRIVE (FOR BUGLE BATTEN SCREWS)FS4.0025AK 5mm x 25mmFS4.0050AK 5mm x 50mmFS5.0025AK 5mm x 25mmFS5.0050AK 5mm x 50mmTORPEDO DRIVEFK25#2TORPEDO No 2 x 25mm longMAGNETIC NUT SETTERSFX 5/16 AK 5/16 Nut Setter - Suits 12g Hex HeadFX 3/8 AK 3/8 Nut Setter - Suits 14g Hex HeadFO 3/8 AK 3/8 Nut Setter - Suits 14g Pentagon Head

47

Panel Drills - Double EndedHSS TITANIUM NITRIDE, GOLD PLATED

Jobber DrillsHSS TITANIUM NITRIDE, GOLD PLATED

DIAMETER LENGTH PACK SIZE CODE

GAUGE IMPERIAL OVERALLNo. 30 1/8 51mm 10 FEN 030 GSNo. 20 5/32 60mm 10 FEN 020 GSNo. 11 3/16 60mm 10 FEN 011 GS

CORDLESS DRILLS AVAILABLE P.O.A.

SIZE LENGTH PACK SIZE CODE

METRIC OVERALL1.0mm 34mm 10 FA 1.00 GS1.5mm 40mm 10 FA 1.50 GS2.0mm 49mm 10 FA 2.00 GS2.5mm 57mm 10 FA 2.50 GS3.0mm 61mm 10 FA 3.00 GS3.3mm 65mm 10 FA 3.30 GS3.5mm 70mm 10 FA 3.50 GS4.0mm 75mm 10 FA 4.00 GS4.5mm 80mm 10 FA 4.50 GS5.0mm 86mm 10 FA 5.00 GS5.5mm 93mm 10 FA 5.50 GS6.0mm 93mm 10 FA 6.00 GS6.5mm 101mm 10 FA 6.50 GS7.0mm 109mm 5 FA 7.00 GS7.5mm 109mm 5 FA 7.50 GS8.0mm 117mm 5 FA 8.00 GS8.5mm 117mm 5 FA 8.50 GS9.0mm 125mm 5 FA 9.00 GS9.5mm 125mm 5 FA 9.50 GS10.0mm 133mm 1 FA 10.00 GS11.0mm 142mm 1 FA 11.00 GS12.0mm 151mm 1 FA 12.00 GS13.0mm 151mm 1 FA 13.00 GS

Section 6

48

Jobber DrillsHSS TITANIUM NITRIDE, GOLD PLATED

CORDLESS DRILLS AVAILABLE P.O.A.

SIZE LENGTH PACK SIZE CODE

IMPERIAL OVERALL1/64 20mm 10 FA 1/64 GS1/32 30mm 10 FA 1/32 GS3/64 44mm 10 FA 3/64 GS1/16 48mm 10 FA 1/16 GS5/64 50mm 10 FA 5/64 GS3/32 54mm 10 FA 3/32 GS7/64 67mm 10 FA 7/64 GS1/8 70mm 10 FA 1/8 GS9/64 73mm 10 FA 9/64 GS5/325 79mm 10 FA 5/32 GS11/64 82mm 10 FA 11/64 GS3/16 89mm 10 FA 3/16 GS13/64 92mm 10 FA 13/64 GS7/32 95mm 10 FA 7/32 GS15/64 98mm 10 FA 15/64 GS1/4 101mm 10 FA 1/4 GS17/64 104mm 10 FA 17/64 GS9/32 109mm 10 FA 9/32 GS19/64 111mm 5 FA 19/64 GS5/16 114mm 5 FA 5/16 GS21/64 117mm 5 FA 21/64 GS11/32 121mm 5 FA 11/32 GS23/64 124mm 5 FA 23/64 GS3/8 125mm 5 FA 3/8 GS25/64 130mm 5 FA 25/64 GS13/32 133mm 1 FA 13/32 GS27/64 133mm 1 FA 27/64 GS7/16 140mm 1 FA 7/16 GS29/64 143mm 1 FA 29/64 GS15/32 146mm 1 FA 15/32 GS31/64 149mm 1 FA 31/64 GS1/2 152mm 1 FA 1/2 GS

49

Hex Key Wrench

Neoprene Washer

ALKON through its association with world class processors both here and overseas offer a full range of metal coatings to provide maximum protection under a variety of conditions.Standard Finishes: Zinc Plated / Zinc Yellow Chromate / Black Zinc / Mech. Gal.Decorative Coatings: Electro Brass / Florentine Bronze / Antique Copper / Black OxideTop Coats: Treated Pine

PROTECTIVE METAL COATINGS AND PLATED FINISHES

Alkote Mechanical Galv to Class 3 Spec AS 3566 Alkote Mechanical Galv to Class 4 Spec AS 3566

In conjunction with one of Australias leading suppliers we use genuine Australian materials and technology to suit our conditions.

Coloured Heads in many colours including the Colorbond range are available in many of our products at an extra cost. (Colorbond is a registered trademark of Blue Scope Steel Ltd.)

EXTREME PROTECTION FOR BUILDING FASTENERS

WING

Quality Coatings

Quality Coatings

ALKOTE TP

DRILL

DRILLDUO

DRILLDUO

DRILLDUO

DRILL

DECK TIMBERWING

Quality Coatings

Quality Coatings

ALKOTE TP

DRILL

DRILLDUO

DRILLDUO

DRILLDUO

DRILL

DECK TIMBER

SIZE CODE

2.0mm SZ 2.00SHORT PL2.5mm SZ 2.50SHORT PL3.0mm SZ 3.00SHORT PL4.0mm SZ 4.00SHORT PL5.0mm SZ 5.00SHORT PL6.0mm (Long) SZ 6.00LONG PL

SIZE CODE

10g WP 10 NE12g WP 12 NE14g WP 14 NE

Section 6

50

Adhesives

PART NO. DESCRIPTION

SILICONESADMULTISIL Multisil Roof & Gutter Silicone (Clear)ADMULTISILGREY Multisil Roof & Gutter Silicone (Grey)ADBATH Bath & Kitchen Antifungal Silicone (White)ADWINDOW Window & Glass Silicone (Clear)

SEALANTSADSEALAGAP Seal-A-Gap Acrylic Gap Sealant

CONSTRUCTION ADHESIVESADLIQUIDBOND Liquid Bond Construction Adhesive

CARTONS OF 20 CARTRIDGES ONLY

OTHER COLOURS AVAILABLE P.O.A

ADMIL ADHESIVES.- SILICONES

- SEALANTS

- CONSTRUCTION ADHESIVES

51





WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU






WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU


WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU






WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU







WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU


WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU



WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU




WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU


WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU




WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU




WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU



Metric Internal/External Circlips Pack

CODE: HP106

SIZE QTY/ PK

INTERNAL12mm 15pc

13mm 15pc

14mm 15pc

15mm 15pc

19mm 15pc

20mm 15pcEXTERNAL6mm 20pc

8mm 20pc

10mm 20pc

12mm 20pc

13mm 20pc

14mm 20pc

16mm 20pc

19mm 20pc

20mm 15pc

22mm 15pc

25mm 15pc

32mm 5pc

Imperial Internal/External Circlips Pack

CODE: HP104

SIZE QTY/ PK

INTERNAL7/16" 15pc

1/2" 15pc

9/16" 15pc

5/8" 15pc

3/4" 15pc

13/16" 15pcEXTERNAL1/4" 20pc

5/16" 20pc

3/8" 20pc

7/16" 20pc

1/2" 20pc

9/16" 20pc

5/8" 20pc

3/4" 20pc

13/16" 20pc

7/8" 15pc

1" 15pc

1-1/4" 5pc

Imperial Internal Circlips Handy Pack

CODE: HP03

SIZE QTY/ PK

1/4" 25pc

5/6" 25pc

3/8" 25pc

7/16" 25pc

1/2" 20pc

9/16" 20pc

5/8" 20pc

11/16" 20pc

3/4" 20pc

13/16" 10pc

7/8" 10pc

15/16" 10pc

1" 10pc

1-1/6" 6pc

1-1/8" 6pc

1-1/4" 6pc

1.-5/16" 6pc

1-3/8" 6pc

Imperial External Circlips Handy Pack

CODE: HP06

SIZE QTY/ PK

1/4" 25pc

5/6" 25pc

3/8" 25pc

7/16" 25pc

1/2" 20pc

9/16" 20pc

5/8" 20pc

11/16" 20pc

3/4" 20pc

13/16" 10pc

7/8" 10pc

15/16" 10pc

1" 10pc

1-/18" 6pc

1-1/4" 6pc

1-5/16" 6pc

1-3/8" 6pc

1-1/2" 6pc

Metric Internal Circlips Large Pack

CODE: HP02L

SIZE QTY/ PK

12mm 20pc

13mm 20pc

14mm 20pc

15mm 20pc

19mm 15pc

20mm 15pc

6mm 10pc

8mm 10pc

10mm 10pc

12mm 10pc

13mm 10pc

14mm 10pc

16mm 4pc

19mm 4pc

20mm 4pc

22mm 4pc

25mm 2pc

32mm 2pc

Metric External Circlips Large Pack

CODE: HP05L

SIZE QTY/ PK

9mm 25pc

11mm 25pc

14mm 25pc

17mm 25pc

18mm 20pc

21mm 20pc

23mm 10pc

24mm 10pc

27mm 10pc

28mm 10pc

32mm 6pc

35mm 6pc

38mm 2pc

40mm 2pc

42mm 2pc

45mm 2pc

50mm 2pc

52mm 2pc

Metric Internal Circlips Pack

CODE: HP02

SIZE QTY/ PK

8mm 20pc

10mm 20pc

13mm 20pc

14mm 15pc

15mm 15pc

16mm 15pc

19mm 10pc

22mm 10pc

25mm 10pc

28mm 6pc

30mm 6pc

32mm 4pc

Metric External Circlips Pack

CODE: HP05

SIZE QTY/ PK

6mm 20pc

8mm 20pc

10mm 20pc

12mm 20pc

13mm 20pc

15mm 15pc

16mm 15pc

19mm 15pc

20mm 15pc

22mm 10pc

25mm 10pc

30mm 6pc

53

Metric E-Clips Handy Pack

CODE: HP08

SIZE QTY/ PK

4mm 50pc

5mm 50pc

6mm 25pc

7mm 25pc

8mm 25pc

9mm 25pc

10mm 25pc

12mm 25pc

Imperial E-Clips Handy Pack

CODE: HP09

SIZE QTY/ PK

5/32" 50pc

3/16" 50pc

1/4" 25pc

5/16" 25pc

3/8" 25pc

7/16" 25pc

1/2" 25pc

5/8" 25pc

Imperial Split Pin Handy Pack

CODE: HP101

SIZE QTY/ PK

1/16 x 1" 150pc

3/32 x 1" 150pc

3/32 x 1-1/2" 150pc

1/8 x 1-1/4" 100pc

1/8 x 2" 75pc

5/32 x 2-1/2" 30pc

*ALSO AVAILABLE IN STAINLESS STEEL

CODE: HP101SS

Imperial Large Split Pin Pack*

SIZE QTY/ PK

1/8 x 2" 50pc

5/32 x 2-1/2" 30pc

3/16 x 3" 20pc

1/4 x 2" 20pc

1/4 x 3" 16pc

5/16 x 2-1/2" 8pc

Metric Copper Washer Handy Pack

CODE: HP125

SIZE QTY/ PK

12 x 6 30pc

14 x 8 20pc

14 x 9 20pc

14 x 10 20pc

16 x 10 15pc

16 x 12 15pc

18 x 12 15pc

20 x 14 15pc

18 x 14 15pc

20 x 16 10pc

24 x 18 10pc

26 x 19 10pc

29 x 34 10pc

32 x 24 5pc

34 x 26 5pc

36 x 24 5pc

Star & Spring Washer Handy Pack

CODE: HP112

SIZE QTY/ PK

LOCKING WASHERS#6 50pc

1/4" 40pc

#8 50pc

5/16" 30pc

#10 50pc

3/8" 20pcINTERNAL/EXTERNAL WASHERS#6 50pc

1/4" 40pc

#8 50pc

5/16" 30pc

#10 50pc

3/8" 20pc

Metric E-Clip Handy Pack

CODE: HP110

SIZE QTY/ PK

4mm 30pc

5mm 30pc

6mm 40pc

7mm 50pc

8mm 50pc

9mm 40pc

10mm 20pc

12mm 20pc

15mm 20pc

CODE: HP109

Imperial E-Clip Handy Pack

SIZE QTY/ PK

1/16" 30pc

1/8" 30pc

3/16" 40pc

1/4" 50pc

3/8" 50pc

1/2" 40pc

5/8" 20pc

3/4" 20pc

7/8" 20pc

Section 6

54

Rubber Grommet Handy Pack

CODE: HP177

SIZE QTY/ PK

OPEN1/8 x 1/4" 15pc

7/32 x 5/16" 10pc

9/32 x 1/2" 7pc

1/2 x 19/32" 3pc

3/8 x 1/2" 6pc

5/16 x 9/16" 5pc

3/8 x 13/16" 3pc

3/8 x 13/16" 3pc

7/16 x 3/4" 4pc

5/8 x 31/32" 3pc

3/4 x 15/16" 2pcCLOSED9/32" 20pc

3/8" 20pc

1/2" 10pc

5/8" 5pc

3/4" 4pc

7/8" 3pc

1" 2pc

R-Clip Handy Pack

CODE: HP116

SIZE QTY/ PK

10 x5.5 x 0.8 42pc

12 x 6.5 x 0.8 30pc

16 x 8 x 0.8 25pc

20 x 12.5 x 0.8 25pc

22.5 x14 x 0.8 20pc

25.4 x17.5 x0.8 8pc

Metric Fibre Washer Pack

CODE: HP176

SIZE QTY/ PK

10 x5.5 x 0.8 160pc

12 x 6.5 x 0.8 100pc

16 x 8 x 0.8 60pc

16 x 10 x 0.8 80pc

19 x 12 x 0..8 40pc

20 x 12.5 x 0.8 40pc

22 x 16 x 0.8 30pc

22.5 x14 x 0.8 20pc

25.4 x17.5 x0.8 15pc

27 x 20 x 0.8 20pc

32 x 22 x 0.8 20pc

32 x 24 x 0.8 15pc

Internal & External Pliers 125mm Pack

CODE: HP PLIERSET C1

SIZE QTY/ PK

Internal 10-17mm Straight Tip 1pc

Internal 10-17mm Angled Tip 1pc

External 9-17mm Straight Tip 1pc

External 9-17mm Angled Tip 1pc

Internal & External Pliers 175mm Pack

CODE: HP PLIERSET C2

SIZE QTY/ PK

Internal 18-30mm Straight Tip 1pc

Internal 18-30mm Angled Tip 1pc

External 18-30mm Straight Tip 1pc

External 18-30mm Angled Tip 1pc

55

CAN'T FIND THE COLOUR OR FASTENER YOU NEED? ANY FASTENER, ANY COLOUR WE CAN PAINT IT!

ALKONPROVIDES A WIDE

RANGE OF

PAINTED FASTENERS

RIVET COLOUR MATRIX

SPECIAL COLOURS PAINTED ON REQUEST (MIN QTY 2,000)COLORBOND & COLOUR NAMES ARE TRADEMARKS OF BLUESCOPE STEEL P/L

COLOUR 4-2 4-3 4-4 4-6 4-8 5-4

Anotec Dark Grey Anotec Silver Grey Blue RidgeBronze OliveBushland Classic Cream Cottage Green Deep Ocean Dune Evening Haze GoldHammersley BrownHeadland IronbarkIronstone Jasper Loft Manor Red Monument Night Sky Pale Eucalypt Pale TerracottaPaperbark Pearl WhitePlantation Sandbank Shale Grey StoneSurfmist Torres BlueWheat White White BirchWilderness Windspray Woodland Grey

= EX STOCK

57

SELF DRILLER COLOUR MATRIX

SPECIAL COLOURS PAINTED ON REQUEST (MIN QTY 2,000)WITH OR WITHOUT NEO

COLORBOND & COLOUR NAMES ARE TRADEMARKS OF BLUESCOPE STEEL P/L

COLOUR 10G 16 x 16mm 10G 16 x 16mm NEO 10G 16 x 25mm 12G 14 x 20mm

Biege Blue RidgeBronze OliveBushland Classic Cream Cottage Greeen Deep Ocean Dune Estate Evening Haze Harvest Headland Ironstone Jasper Loft Manor Red Monument Night Sky Pale Eucalypt Paperbark PlantationRiversand Sandbank Shale Grey SummershadeSurfmist WheatWilderness Windspray Woodland Grey

= EX STOCK

Section 7

58

SELF DRILLER COLOUR MATRIX (CONTINUED)


COLORBOND & COLOUR NAMES ARE TRADEMARKS OF BLUESCOPE STEEL P/L

COLOUR 12G 14 x 20mm NEO 12G 14 x 35mm NEO 12G 14 x 45mm NEO 12G 14 x 55mm NEO

Biege Blue RidgeBronze OliveBushland Classic Cream Cottage Greeen Deep Ocean Dune Estate Evening Haze HarvestHeadland Ironstone Jasper Loft Manor Red Monument Night Sky Pale Eucalypt Paperbark PlantationRiversand Sandbank Shale Grey SummershadeSurfmist WheatWilderness Windspray Woodland Grey

= EX STOCK

59

TYPE 17 COLOUR MATRIX

COLOUR 10G X 25mm NEO

12G X 25mm 12G X 25mm NEO

12G X 50mm NEO

12G X 50mm NEO - DBL GRIP

BiegeBlue RidgeBushland Classic Cream Cottage Green Deep Ocean Domain Dune Estate Evening Haze Headland Ironstone Jasper Loft Manor Red Monument Night Sky Pale Eucalypt Paperbark PlantationRiversand Sandbank Shale Grey Surfmist WheatWilderness Windspray Woodland Grey


COLORBOND & COLOUR NAMES ARE TRADEMARKS OF BLUESCOPE STEEL P/L = EX STOCK

Section 7

60

ALKON PRODUCTS COME IN A VARIETY OF PACKAGING TYPES.

WE CAN CUSTOMISE

PACKAGING TO ANY SPECIFIC CUSTOMER

REQUIRMENTS.

TO

Alkon PackagingAlkon Packaging

61

Buckets

Tubs

PERSONALISED LABELS AVAILABLE


Section 7

62

Hang Packs


Boxes


63

Screwbolts

Hammer Drives

Cordless Drills

Rivet Guns

Nails

Brads

Cup Head Bolts

Purlin Assemblies

Roofing Bolts

Coach Screws

Washers

Stainless Steel:

- Bolts & Nuts (Gr.304 & 316)

- Set Screws (Gr.304 & 316)

- Washers

- Nuts & Nylocs

High Tensile:

- UNC Bolts & Nuts

- UNF Bolts & Nuts

- Metric Coarse Bolts & Nuts

- Structural Bolts

- Socket Head Cap Screws

FOR ALL OUR PRODUCTS AND SERVICES FOR ALL OUR PRODUCTS AND SERVICES FOR ALL OUR PRODUCTS AND SERVICES FOR ALL OUR PRODUCTS AND SERVICES GO TO WWW.ALKON.COM.AUWWW.ALKON.COM.AUWWW.ALKON.COM.AU

ALSO AVAILABLE

64

Terms and Conditions

TERMS AND CONDITIONSThe products featured in this list represent some of the most popular fasteners in use today. Alkons quality is second to none. Samples of any item can be provided for your assessment. All stock is inspected and batch numbered for traceability.

Every effort is made to ensure availability of our imported stock, however, stock shortages are unavoidable. Back orders are kept at customers request.

DISCOUNTS FOR QUANTITY BUYS OR STOCK ORDERS

FREIGHT TERMSINTERSTATE CAPITALS - EX MELBOURNE

NEW SOUTH WALES FOR F.I.S. - $250 MINIMUM ORDER VALUE F.O.B. CHARGE $30.00

SOUTH AUSTRALIA FOR F.I.S. - $250 MINIMUM ORDER VALUE F.O.B. CHARGE $30.00

WESTERN AUSTRALIA FOR F.I.S. - $500 MINIMUM ORDER VALUE F.O.B. CHARGE $50.00

TASMANIA FOR F.I.S. - $200 MINIMUM ORDER VALUE F.O.B. CHARGE $20.00

OTHER AREAS BY NEGOTIATION, DEPENDANT ON ORDER VALUE

COUNTRY VICTORIA FOR F.I.S. - $200 MINIMUM ORDER VALUE F.O.B. CHARGE $20.00

MELBOURNE METRO FOR F.I.S. - $100 MINIMUM ORDER VALUE F.O.B. CHARGE $10.00

INTERSTATE CAPITALS - EX BRISBANE

BRISBANE METRO FOR F.I.S. - $100 MINIMUM ORDER VALUE F.O.B. CHARGE $10.00

GOLD / SUNSHINE COAST FOR F.I.S. - $200 MINIMUM ORDER VALUE F.O.B. CHARGE $20.00

QLD COUNTRY FOR F.I.S. - $500 MINIMUM ORDER VALUE F.O.B. CHARGE $50.00

SYDNEY & NORTHERN RIVER FOR F.I.S. - $250 MINIMUM ORDER VALUE F.O.B. CHARGE $30.00(INCL. NEWCASTLE)

OTHER AREAS BY NEGOTIATION, DEPENDANT ON ORDER VALUE

TERMS AND CONDITIONS

65

All goods are supplied by the Company on the terms and conditions set out herein and no addition or variation to these terms and conditions will have any effect unless expressly agreed in writing by a Director of the company.

1. Quotationsa) Quotations are valid for 30 days and unless specifically stated otherwise are

based on ex stock and subject to prior sales. After the period of 30 days has expired the Company reserves the right to vary or withdraw any quotation given by it prior to the Companys acceptance of the Customers order.

b) It is the responsibility of the Customer to ensure that the quantity, type and description of the goods specified in any quotation corresponds with the quantity, type and description of the goods required by the Customer and in respect of which the Customer has requested the Company to quote. The Company shall be under no liability whatsoever to the Customer for any discrepancy not drawn to the Companys attention prior to the acceptance by the Company of any order placed on the basis of the relevant quotation.

2. Pricea) Prices quoted do not include GSTb) Notwithstanding Clause 1(a), the Company shall be entitled to vary the

purchase price for the goods at any time prior to delivery if the cost to the Company of performing the contract is increased by reason of delivery of the goods outside normal working hours at the request of the customer or to an address other than that originally specified by the Customer.

c) Notwithstanding Clause 1(a), the Company shall be entitled to vary the purchase price for imported goods at any time prior to delivery if the currency used to quote has shifted by more than 2.5% between the date quoted and the date of invoice.

3. Terms of Paymenta) Where the Customer has a credit account with the Company, the invoice

amount for the goods must be paid in full within thirty (30) days of the date the goods were invoiced. In all other cases the purchase price for the goods must be paid in full on or before delivery.

b) The Customer is not entitled to withhold payment or make any deduction from the purchase of the goods in respect of any set off or counterclaim.

c) If the Customer fails to pay for any installment or installments of the goods, the Company may in its absolute discretion, but without prejudice to any other remedy it may have, postpone the fulfillment of its obligations under this transaction and under any other transaction with this Customer until such payment is made and charge to the Customer any extra expense incurred thereby.

e) Credits and returned goods must be pre approved prior to returning to Alkon Sales.

4. Property in the Goodsa) Notwithstanding delivery of the goods to the Customer, property in the goods

will not pass to the Customer until the Customer has paid to the Company all sums owing by the Customer to the Company under the transaction.

b) Until such payment is made, the Customer holds the goods as bailee for the Company and will store the goods separately from other goods on the premises of the Customer or in some other way as to render them capable of separate identification.

c) Where payment is not made on or before the due date, the Customer will, upon demand by the Company, deliver up the goods to the Company, failing which the Company is hereby irrevocably authorised to enter upon the place where the goods are situated and remove the same and the Customer will indemnify the Company against any action claim or demand arising out of the exercise by the Company of its powers under this sub-clause.

d) Where the contract is for delivery of goods by installments, the property will not pass in any installment until payment has been made to the Company for the whole ordered quantity.

5. RiskRisk will pass to the Customer on delivery of the goods notwithstanding that ownership remains with the Company until payment is made in full.

6. Deliverya) Unless otherwise stated in writing, the Company shall be entitled to make

delivery by installments and to determine the route and manner of delivery of the goods.

b) The Company shall be entitled to deliver the goods to the premises notified by the Customer even though those premises may be unattended by the Customer at the time of delivery

c) The Companys delivery records shall be prima facie proof of delivery of the goods to the Customer.

d) If the Company is prevented (directly or indirectly) from delivering the goods or any of them by reason of any act of God or strikes, lockouts, trade disputes, fire, breakdown, interruption of transport, governmental action or any other cause whatsoever (whether or not of the like nature to those specified herein) outside its control the Company will be under no liability whatsoever to the Customer and will be entitled at its option either to terminate the transaction or to extend the time of its performance.

7. Cancellation or Suspension of OrdersExcept where the Customer has a statutory right of termination, orders accepted by the Company may not be cancelled either wholly or in part without the consent in writing of the Company.

8. Default by CustomerUpon the happening of any of the following events:a) The Customer makes default in any payment due under any transaction or in

payment of any monies due by the Customer to the Company,b) a resolution is passed or proposed or a petition is presented or an application

filed for the winding-up of the Customer;c) a receiver or receiver and manager is appointed of the property or any part of

the property of the customer;d) the Customer makes or proposes to make any arrangements with its creditors;e) the Customer is placed under official management;f) execution is levied upon any of the assets of the Customer;g) the Customer becomes bankrupt, the Company may at its option and

notwithstanding its waiver of any previous default or failure and without prejudice to any other remedies it may have withhold further deliveries or require payment in cash before or on shipment or delivery (notwithstanding any prior agreement as to the terms of payment) or terminate all or any purchase orders.

9. Liabilitya) Subject to any State or federal legislation which expressly prohibits the

exclusion of any condition or warranty which may be implied into any transaction;

i) the Company will be under no liability to the Customer for any defects in the goods resulting from or arising out of the production of the same in accordance with any information, designs or drawings provided by the Customer or submitted to the Customer by the Company and approved by the Customer;

ii) all conditions, warranties and representations on the part of the Company which are not contained in or incorporated by reference in these terms and conditions or on the fact hereof, whether express or implied, statutory or otherwise, and whether collateral or antecedent hereto or otherwise, are hereby expressly excluded;

iii) The limit of the companies warranty on the goods will extend so far as the cost of replacement of the same or an equivalent good and will only take effect if the product manufacturer is proven to have been negligent in its manufacture to the customers drawing or specifications. Any additional costs, claims or liabilities will be borne by the Customer.

iv) the Company will be under no liability whatsoever to the Customer for any loss, injury or damage (including consequential loss, injury or damage) suffered or caused as a result of or arising out of any act or omission (whether negligent or otherwise) by the Company, its servants or agents or any other person in any way related to or arising out of the performance of the Contract by the Company;

10. Miscellaneousa) The Customer will, upon demand by the Company, pay to the Company the

amount of any stamp duty or other tax (including sales tax and GST) payable on the supply of any goods by the Company.

b) A certificate signed by an office of the Company stating the amount due and payable by the Customer under any contract will be prima facie evidence thereof.

11. Intellectual PropertyAll copyright, design right and other intellectual property in any design, specification, process, method of working or other information relating to the Goods (other than that provided by the Buyer to the Company) shall vest for all time in the Company. The Company only grants to the Buyer an irrevocable licence to use the Goods.

Declaration of compliance and guaranteeAlkon Sales PTY LTD hereby guarantee that all our AK branded products sold as ALKOTE Class 3 &ALKOTE Class 4 are coated strictly in accordance with Australian Standard as 35666.2-2002, and will meet the corrosion test requirements mentioned therein.In addition, we guarantee that all AK self drilling screws will conform to the structural and performance requirements of Australian Standard as 3566.1-2002

The following provisions apply:1) The screws are used with compatible roofing and substrate material.2) The screws shall be clearly marked with an AK head marking, and are

installed correctly.3) The screws are used in environment as recommended by the standards.4) All claims must be in writing and is conditional on inspection and the decision

of the Alkon Sales inspector.5) All screws that are deemed to be faulty will be replaced free of charge, but

Alkon Sales will not be responsible for any loss or damage caused.

66





WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU






WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU


WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU






WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU







WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU


WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU



WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU




WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU


WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU




WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU




WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU

WWW.ALKON.COM.AU



WWW.ALKON.COM.AUBRISBANE 2/25 Michlin St, Moorooka, QLD, 4105 P (07) 3848 6855 F (07) 3848 0411E [email protected]

MELBOURNE 12-14 Abruzzo Cres, Thomastown, VIC, 3074 P (03) 9464 3711 F (03) 9464 3733E [email protected]

Documents

AK Catalogue ED7 150dpi