www.aim-plc.com

AIM-Kit1

Con

cept

ion

ww

w.m

pstu

dio.

fr - j

une

2014

AIM-Kit1-Evaluation boards for STM32Data brief

DescriptionThe AIM-Kit1-Evaluation boards are development platforms for STMicroelectronic’s STM32 family available with an ARM Cortex M0, M3 or M4. A wide range of hardware features and software tools helps you to evaluate the chosen micro-controller using several programming contexts: FBD (Functional Block Diagrams), C language, HMI and real time applications.

Tutorials, videos and clear online help allow you to immediately start developing applications.

Extension headers make it easy to connect daughter boards to add industrial I/O, Motor control, Ethernet, RF tranceiver, etc... In this way you can quickly learn how to program in a real-life context.

The AIM-Kit1-Evaluation board integrates an on-board AIM-Link which can be easily used for SWD interface programming and debugging. The board is powered via a micro-USB connector.

Features• AIM-Kit1-Evaluation board for

STM32 F0, F1, F2, F3 & L1• RS-232 channel (RX, TX, /CTS, /RTS) • CAN 2.0 A/B channel for F103,

F205, F415• 2,4’’ 240×320 TFT color LCD

with touch screen• 4 user buttons• 1 reset button• 4 color LEDs• 1 Analogic potentiometer • 1 piezoelectric buzzer• 1 relay output (R/T)• RTC with backup

(battery not included)• Extension connector CO6 18 pins

for daughter board left side• Extension connector CO7 10 pins

for daughter board right side• Extension connector CO8 8 GPIO• Extension connector CO9 11 GPIO

Doc ID 14163

www.aim-plc.comwww.aim-plc.com

AIM-Kit1

> Software package: IO32 DevToolsThe AIM-Kit1-Evaluation board is ready to use and can be easily programmed using the IO32 DevTools software package which includes two environments µOne & Agilia and a set of libraries. µOne, based on Eclipse, incorporates a step by step wizard which helps you program the embedded system you need. With the graphic programming workshop Agilia, you drag and drop function blocks, then join them together with virtual wires. You debug in real time or by using functional simulation on your PC. You can quickly create a HMI on the AIM-Kit1’s LCD and all this without writing a single line of code!Clear online help allows you to immediately start developing applicationsTo download the latest available version of the AIM-Kit1 IO32 DevTools package, go to www.aim-plc.com.

> Demonstration software

Demonstration software is preloaded in the AIM-Kit1’s Flash memory presenting an example of a HMI quickly programmed using Agilia. To download source code of the Agilia demonstration software, go to www.aim-plc.com.

> IO32 DevTools’s tutorialsFive tutorials help you to be quickly operational: - µOne Installation (15’) - Creating a Bare Metal project (45’) - Creating a µRTS system and application (20’) - Managing a µRTS application (60’) - Creating an Agcore system (60’)

> Ordering informationOrder code Reference µ-controller Flash SRAM

AIM-Kit1-F051 AIM-Kit1-Evaluation board F051 STM32F051R8T 64 KB 8 KBAIM-Kit1-F103 AIM-Kit1-Evaluation board F103 STM32F103RGT6 1024 KB 96 KBAIM-Kit1-F205 AIM-Kit1-Evaluation board F205 STM32F205RGT6 1024 KB 128 KBAIM-Kit1-F415 AIM-Kit1-Evaluation board F415 STM32F415RCT 1024 KB 192 KBAIM-Kit1-L152 AIM-Kit1-Evaluation board L152 STM32L152RCT 256 KB 32 KB

Doc ID 14163

www.aim-plc.comwww.aim-plc.com

AIM-Kit1

> AIM-Kit1-daughterboard- PLC• DescriptionWith the AIM-Kit1-PLC daughterboard you can add 11 industrial I/Os to the AIM-Kit1: - 4 digital inputs (Mosfet N – voltage < 24 V)- 4 digital outputs (voltage < 5 V – Current: 10mA)- 3 relays (R/T) 0.3 A at 125 V AC or 1 A

at 30 V CC.Connect the AIM-Kit1-daughterboard-PLC to the CO9 connector of the AIM-Kit1.

> AIM-Kit1-daughterboard- MTR• DescriptionWith the AIM-Kit1-MTR daughterboard you can control 2 CC motors or 1 step motor and an encoder input. The AIM-Kit1-MTR must be powered by an external power supply 8-52 V DC and 2.8 A max.- In 2 CC motors mode, the AIM-Kit1-MTR card provides

1 analog output and 1 digital input (voltage < 5 V Cmos) per motor.

- In step motor mode, the AIM-Kit1-MTR card provides 4 analog outputs, an encoder input and 2 digital inputs (voltage < 5 V Cmos).

Connect the AIM-Kit1-daughterboard-MTR to the CO9 connector of the AIM-Kit1.

> AIM-Kit1-daughterboard- ETH• Description The AIM-Kit1-ETH daughterboard provides an ethernet communication gateway for the AIM-Kit1. This daughterboard works as an ethernet modem. It connects to the C07 connector on the AIM-Kit1.The Ethernet modem is controlled using a serial link by the STM32 application.

> AIM-Kit1-daughterboard- RF• Description The AIM-Kit1-RF daughterboard provides an RF 868 MHz communication gateway for the AIM-Kit1. It connects to the C07 connector on the AIM-Kit1. The RF tranceiver is controlled using a serial link and control signals by the STM32 application.

Preliminary

Doc ID 14163

www.aim-plc.com21 Avenue de la Plaine Fleurie - 38240 Meylan - FRANCEPhone: +33 (0)4 76 90 10 95 - Fax: +33 (0)4 76 41 96 36 - e-mail: contact@aim-plc.com

Con

cept

ion

ww

w.m

pstu

dio.

fr - j

une

2014

AIM-Kit1

Information in this document is provided solely in connection with AIM products. Applications Industrielles des Microprocesseurs and its subsidiaries (“AIM”) reserve the right to make changes, corrections, modifi cations or improvements, to this document, and the products and services described herein at anytime, without notice.

All AIM products are sold pursuant to AIM’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the AIM products and services described herein, and AIM assumes no liability whatsoever relating to the choice, selection or use of the AIM products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by AIM for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.

Resale of AIM products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by AIM for the AIM product or service described herein and shall not create or extend in any manner whatsoever, any liability of AIM.

Please Read Carefully:

Please Read Please Read Carefully:Carefully:

> Ordering informationOrder code Reference DescriptionAIM-Kit1-PLC AIM-Kit1-daughterboard1-PLC Industrial I/O: 4 DI, 4 DO, 3 relaysAIM-Kit1-MTR AIM-Kit1-daughterboard2-MTR Motors control: 2 CC or 1 step/stepAIM-Kit1-ETH AIM-Kit1-daughterboard3-ETH Ethernet 100 MbsAIM-Kit1-RF AIM-Kit1- daughhterboard-RF Tranceiver RF 868 MHz

Doc ID 14163

AIM and the AIM logo are trademarks or registered trademarks of AIM in various countries.

Information in this document supersedes and replaces all information previously supplied.

The AIM logo, µOne, Agilia, e-MetaG and IO32 DevTools are registered trademarks of AIM.

All other names are the property of their respective owners.

© 2014 AIM Applications Industrielles des Microprocesseurs - All rights reserved