AHA Dialer Help

1

AHA Dialer User Manual


Rev.: 1.0

2

1 INTRODUCTION ............................................................................................................................................... 3

2 FEATURES .......................................................................................................................................................... 3

3 PC DIALER INSTALLATION .......................................................................................................................... 3

4 BASIC FUNCTIONS AND FEATURES OF THE DIALER .......................................................................... 3

1. LAUNCHING THE AHA DIALER .......................................................................................................................... 3 2. OVERVIEW.......................................................................................................................................................... 3 3. <CONNECT> ....................................................................................................................................................... 4 3.1 SET UP A PROFILE ................................................................................................................................................ 4 3.2 CONNECTING TO THE INTERNET .......................................................................................................................... 4 4. <PHONEBOOK> ................................................................................................................................................... 4 5. <MESSAGING> ................................................................................................................................................... 7 6. <LOGS> ............................................................................................................................................................ 11 7. <OPTIONS> ....................................................................................................................................................... 11 8. HOW TO RECEIVE A MESSAGE ........................................................................................................................... 14 9. LED INDICATOR INFORMATION........................................................................................................................ 15

6 UNINSTALLING THE SOFTWARE .................................................................................................................. 15


Rev.: 1.0

3

1 Introduction

It is a CDMA EVDO Rev.A Modem. Besides Windows OS, It can also be run under MAC environment which makes it become the perfect solution for customization.

2 Features

Compact and sleek dongle design Provides EVDO/CDMA network support Plug-and-Play: installation supports Windows XP, Vista and Win 7. Also supports

MAC and Linux

3 PC dialer Installation

The Dialer Software and drivers will be installed automatically.

4 Basic functions and features of the dialer

1. Launching the AHA Dialer

To Launch the AHA Dialer, double-click the shortcut icon of the Connection Manager on the desktop called AHA Dialer.

2. Overview

The main menu of the AHA Dialer is as below.


Rev.: 1.0

4

3. <Connect>

3.1 Set up a profile

The profile should already be created but if not please follow the instructions below. 1. Click Tools-Options… 2. Select <Profile> 3. Get current profile from default profile. 4. Press <Edit>/ <New> to modify or add new user.

Note: Default Profile should be Number - #777 User Name – [email protected] Password - aha

3.2 Connecting to the internet

Click < Connect>button to connect to the internet.

4. <Phonebook>

Click <Phonebook> button enter phonebook to edit contact list. If you want save contacts in Data card or UIM please select <Data card>.and

<UIM Card> 1). Add new contacts please press <New>, input name and numbers then press

save.


Rev.: 1.0

5

2). Select a contact name. You can press <Edit> to modify name and number.


Rev.: 1.0

6

3). Select a contact name, press <Delete>, it will show below message to confirm with you again.

4). Select a contact name, press <SMS> will show below picture, you can edit

message on blank and press <Send> to send the massage or press <Save> to just save it or press <Cancel> to cancel it.

5) Press <Find>, you can search the name which you want from contacts lists.


Rev.: 1.0

7

5. <Messaging>

Click <Messaging> button enter messaging.


Rev.: 1.0

8

1). Press <new> button to create a new message. You can input a number on <number> bar.

You also can press <Group> to select number from contact. Press<Contacts>> > to show contacts list, select a contact and press <Add> to

add the number then press <OK>.


Rev.: 1.0

9

Edit the message on black then press <Send> button to send out the message.


Rev.: 1.0

10

2). Select one message in inbox, you can see as below picture. Press <Reply> to reply the message, press <Forward> to forward the message to others.

3). Press <Delete> will delete message you select, but it will ask below question before delete.

4). Press <Setting> you can select store message in computer, Data card and UIM card. Press <Apply> to save your selection.


Rev.: 1.0

11

6. <Logs>

Click <Logs> button to check connect history. You can press <Delete> to delete the connect history one by one. Also you can press <Clear> to delete all history.

7. <Options>

1). Press <Tools>-<Options…>, press <New>/<Edit> to add or modify the Profile name/Access name/User name/Password. Press <Save> it.


Rev.: 1.0

12

2). Press <Modem>, you can select data mode: 1x / EVDO /Hybrid, then press <Apply> to save the setting.

3). Press <Others>, you can select to Active splash screen, then press <Apply> to save it.


Rev.: 1.0

13

4).Press <About>, you can see the detail information: Dialer Version, ESN, IMSI,MDN,PRL Version, Firmware Version, Hardware Version.


Rev.: 1.0

14

8. How to receive a message

When receive a new message, you will see below, it display message’s content and receive time.

Also can press <Messaging> enter to Inbox; you will find the new unread message in inbox,


Rev.: 1.0

15

Select the message, unread will change to read and you will see the detail information about this message

9. LED Indicator Information

LED Indications Dongle Working Status Long Burning System initializing

On 0.2s, Off 1.9s, Repeat No Signal / Searching

Always Off Idle with Signal

Long Burning In used

6 Uninstalling the software

1. Start->Programs->AHA Dialer, Click uninstall, and the software will be uninstalled.

Documents

AHA Dialer Help