AGS Technology is a custom injection molding company specializing in the use of recycled plastics. AGS has positioned itself to be a reliable, low cost producer for OEM and Tier 1 companies in North America for structural plastic parts.

OVERVIEW• Founded in 1995• Complete Recycled Material Processing & Testing Facility• 80-720 Ton Injection Molding Facility• Assembly Capabilities• IATF Registered• Certified Minority Owned Business• Annual Revenues $12,000,000

Raw Material Processing, Injection Molding & Assembly – Batavia, IL

Recent InvestmentsOCT 2019 Raw material virgin:regrind ratio blenderMAR 2019 iMFLUX low constant pressure moldingNOV 2018 Increased tool room capability with

milling machine and 6x12 surface grinderMAY 2018 Installed automation/vision systemsJAN 2018: Installed (2) JSW 720 ton pressesDEC 2017 Added 20,124 ft² warehouse facilitySEP 2017: Installed Conair RWX dryer systemAUG 2017: Installed JSW 720 ton pressAPR 2017: Installed JSW 720 ton pressAUG 2016: Installed JSW 500 ton pressAPR 2016: Upgraded IT infrastructure

with ERP addition (IQMS)SEP 2015: Re-engineered material

cleaning & blending operationAUG 2015: Installed JSW 310 & JSW 500JAN 2015: Consolidated three AGS

facilities to Batavia location

OVERVIEW

720 Ton JSW (JAN 2018)

Recycling Operation

IQMS ERP

TRADITIONAL RECYCLINGPlastic regrind is fed into an extruder to make plastic pellets.

AGS RECYCLINGFormulated regrind is fed directly into the injection molding machine to make parts. • Eliminates a manufacturing step and the associated cost/margin.

• Eliminates a material heat history.

• Eliminates finger pointing.

THE AGS PROCESS

AGS BENEFIT: SUPERIOR TRACK RECORDAGS Technology has an excellent quality and delivery track record with demanding customers. As a result, AGS Technology has been awarded significant new business from automotive and non-automotive customers.

AGS BENEFIT: RECYCLING SOLUTIONSParts made from Injectoblend™ materials are based on post-industrial and post-consumer sources of plastic making them inherently recycled and environmentally friendly. AGS also provides closed loop recycling solutions.

AGS BENEFIT: MATERIAL PERFORMANCEParts made from Injectoblend™ materials are used in applications that are subjected to demanding physical, thermal, and environmental conditions.

AGS BENEFIT: GLOBALLY COMPETITIVEParts made from less expensive Injectoblend™ materials are globally competitive since the bulk of the cost of a “shoot and ship” injection molded part is raw material.

60%15%

9%

8%

5% 3%Virgin Raw Material

Machine

Labor

SG&A

Profit

ExpendablePackaging

Cost of a "Shoot and Ship" PartMolded in Virgin Raw Material

COSTSAVINGS

50%15%

9%

8%

5% 3%Cost Savings

Recycled RawMaterialMachine

Labor

SG&A

Profit

ExpendablePackaging

Cost of a "Shoot and Ship" PartMolded in AGS Injectoblend Raw Material

AGS BENEFIT: IATF REGISTEREDInjection molding and raw material facilities are IATF registered.

AGS BENEFIT: MINORITY OWNED BUSINESSAs a certified MBE, AGS Technology helps ensure that sourcing and new product introductions meet corporate diversity and procurement targets.

AGS BENEFIT: ROOM FOR GROWTHIn January 2015 AGS Technology successfully completed its move to a larger 78,000 square foot facility in Batavia, IL.

• Previous Injection Molding Facility• Four overhead cranes 3.5 Tons to 17.5 Tons• Room for 22-30 Injection Molding Presses• 6500 Amp Electric Service• Underground Service Tunnel• 7 Silos Rail Served• Large Land Site with Room for Expansion

In December 2017 AGS Technology expanded its warehouse and assembly operations with an additional 20,124 square foot facility in Batavia, IL.

Investing in automation and vision systems to reduce labor.AGS BENEFIT: ADVANCED TECHNOLOGY

AGS BENEFIT: DISRUPTIVE TECHNOLOGYInvesting in cutting edge iMFLUX low constant pressure molding technology to automatically adjust for recycled plastic viscosity differences to eliminate flash and short shots in addition to many other benefits.

GETTING STARTED – NEW & EXISTING TOOLING1) Customer identifies part candidates that are best suited for the AGS process:

• Material intensive parts.

• AGStimator is available online at www.agstechnology.com to help assist in this process.

2) AGS Technology provides two quotations:

• Engineering grades of unfilled and filled thermoplastics such as ABS, ABS+PC, Acetal, Nylon, Polycarbonate, Polyester, etc…

• Virgin or currently specified material on the drawing. • Injectoblend™ recycled equivalent.

3) Customer sources or transfers tooling to AGS Technology:• AGS Technology submits PPAP and runs virgin or currently specified material to support customer’s production. • AGS Technology submits PPAP and sample parts made from Injectoblend™ recycled equivalent for customer to validate.• Establish breakpoint for transition to Injectoblend™ recycled parts based on formal approval by customer.

FREQUENTLY ASKED QUESTIONSHow does AGS Technology assure continuity of supply?

• AGS has developed strong relationships with a wide network of brokers, dealers, collectors, and generators.

• AGS does not rely on any single source or feed stream of recycled raw material.

• AGS inventories large safety stocks since recycled raw material only becomes available when it is generated.

• Fallback or contingency plan is to use virgin raw material at no additional cost to the customer.

FREQUENTLY ASKED QUESTIONSDoes tooling require any special modifications in order to run the Injectoblend™ recycled material?

• No special tooling modifications are required.

• AGS has developed its own tooling standards manual to ensure molds are designed, built, and optimized to run Injectoblend™ recycled material.

• AGS Injectoblend™ parts will be “as good or better” than parts made from virgin material.

951 Douglas RoadBatavia, IL 60510

www.agstechnology.com