DEUTZ-FAHR Agrotron K 420

Agrotron K SERIES

VERSATILE. FLEXIBLE. COMPACT.Deutz-Fahr Agrotron K Series

Deutz Fuel Efficient EnginePower, flexibility, low fuel consumption and impressive durability are the key strengths of the Euro III 2012 Series engines equipping the Agrotron K.

Offered as 4038 cm³ four cylinder, this engine features turbo-intercooler forced induction and an innovative combustion chamber configuration to combine superlative power and extraordinary torque with impressive fuel economy.

The fuel economy is achieved by high pressure individual injection system; using individual injection pumps embedded in the cylinder block and lubricated with engine oil make it possible for the engine to deliver remarkably high, continuous performance, even in the heaviest duty applications. Together with the electronic engine governor this ensures outstanding torque even at low engine speeds. As well as maximising fuel economy, this injection system also contributes to reducing engine noise and vibration.

Versatile PTOWith an interchangeable PTO output shaft and an impressive four selectable speeds (540/540ECO/1000/1000ECO), the Agrotron K is capable of working with any PTO powered implement. The PTO is simple and rational to operate, with electrohydraulic controls and an LCD screen displaying the effective PTO speed, allowing the driver to use any implement in the ideal operating conditions.

Simply Perfect TransmissionAgrotron K tractors are equipped with the extraordinary, fully synchronised ZF 7.100 transmission, offered with a 24 forward speeds and 8 reverse, this made up of 4 gears and two electro-hydraulically selected ranges (for “Road” and “Field” modes), and a three speed Powershift. The Powershift gearbox lets the driver select three different ratios for each speed, even under load (and without using the clutch pedal), by simply pressing the buttons on the transmission lever. The three selectable ratios of the Powershift gearbox also let the driver increase speed by 20% by simply shifting up to the next ratio, or reduce speed by approximately 17% by selecting the next lowest ratio. This means that in the majority of operations, the driver can shift ratios under load with no interruption in drive, and take full advantage of the capabilities of the tractor for maximum productivity.

Lastly, Agrotron K tractors are also equipped with the Powershuttle hydraulic reverse shuttle, which lets the driver change the direction of drive (FWD/REV) under load and without using the brakes or clutch at speeds up to a maximum 12.5 km/h. The Powershuttle is controlled from a practical lever (protected by a safety guard to prevent accidental selection), and is particularly useful during headland manoeuvres and during operation with the front end loader.

The Ultimate CabThe Agrotron K sets truly superlative new standards for comfort and visibility, while interior space is nothing short of astonishing. Access to the cab itself is just as excellent: with broad slip-proof steps in zinc-plated metal and generous doors. The cabin is all logically laid out with colour coded controls that are well positioned for those long days in the field.

To damp the vibrations reaching the cab, the Agrotron K420 is equipped with a mechanical cabin suspension, together with the Air suspended seat this gives the operator Armchair like comfort.

Powerful Hydraulics The rear lift, with EHR electronic control, has a maximum lift capacity of 6200 kg. The EHR control unit is capable of automatically performing numerous functions when the lift is activated: draft force and position control; mixed control mode; quick soil engagement; float mode; oscillation damping; transport lock, lift height limiter; and rate of drop control. When the tractor is driven at speed on the road, large amplitude oscillations may be caused by the implement hitched on the lift, which could compromise safety. Through special sensors integrated in the lift arms, the Antidumping function (active above 8 km/h) detects oscillation and controls compensating lift movements to counter the oscillations and maximise the stability of the tractor-implement system.

P +61 (3) 8353 3600 F +61 (3) 8353 3699

W www.deutztractors.com.au199 Australis Drive, Derrimut, Victoria 3030

PFG Australia Pty Ltd

TECHNICAL DATAAGROTRON K420

ENGINE

Emissions Tier 3

Manufacturer Deutz

Cylinders/Capacity/Valves no/cm3/no 4/4038/2

Bosch High Pressure Individual Injection

Turbo Intercooler

Maximum power (ECE R 120) @2,000 rpm kW/HP 82/112

Max. torque Nm 413

Fuel Tank Capacity Lts 180

TRANSMISSION

Maximum speed Km/h 40ECO

Type ZF

Electrohydraulic power shuttle

Number of Powershift speeds No. 3

Number of speeds No. 24+8

PTO

P.T.O. 540/540ECO/1,000/1,000ECO

Auto P.T.O.

Front P.T.O. 1,000

FRONT AND REAR AXLE

Front wheel drive electrohydraulically engaged

Electrohydraulically operated differential lock

Limited slip front axle

BRAKES

4 wheel breaking

ParkBrake

LIFT

Rear lift electronic

Rear lift capacity Kg 6,220

Front lift

HYDRAULIC SYSTEM

Pump delivery (std) l/min 63

Auxiliary rear hydraulic distributors (std) Sets 3

CAB

Air conditioning

High visibility roof

Mechanical cabin suspension

Driver seat with air sprung suspension

Passenger seat

DIMENSIONS AND WEIGHTS

Standard rear tyres 480/70 R38''

Max. length mm 4,139

Wheelbase mm 2,419

Weight kg 4,440

DEALER:DEUTZ-FAHR Agrotron K

For exact specifications please consult your local Deutz-Fahr dealer. The above specifications refer to tractors with all available equipment. For standard equipment and options, refer to the current price list and ask your local dealer for details.