3
Hindawi Publishing Corporation Advances in Civil Engineering Volume 2011, Article ID 871406, 2 pages doi:10.1155/2011/871406 Editorial Advances in Instrumentation and Monitoring in Geotechnical Engineering D. N. Singh, 1 Nagaratnam Sivakugan, 2 and Sai K. Vanapalli 3 1 Department of Civil Engineering, Indian Institute of Technology Bombay, Mumbai 400076, India 2 Civil and Environmental Engineering, School of Engineering and Physical Sciences, James Cook University, Townsville, QLD 4811, Australia 3 Civil Engineering Department, University of Ottawa, A112, 161 Louis Pasteur, Ottawa, ON, Canada K1N 6N5 Correspondence should be addressed to D. N. Singh, [email protected] Received 11 November 2011; Accepted 11 November 2011 Copyright © 2011 D. N. Singh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Geotechnical instrumentation to monitor the performances of earth and earth-supported structures is increasingly becoming popular. Verification of long-term performances, validation of new theories, construction control, warning against any impending failures, quality assurance, and legal protection are some of the many reasons for geotechnical instrumentation. They are not only used in field situations, but in laboratories too. With the recent advances in materials and technology, and the need for more stringent perfor- mance control, there had been significant developments in the recent past in instrumentation and monitoring tech- niques. We are thankful to Hindawi Publishing Corporation for inviting us to act as Guest Editors of this special issue. The main focus of this special issue is to document the recent advances in the instrumentation and monitoring techniques in geotechnical engineering. Authors were invited to disseminate their research findings and recent advances in the instrumentation and monitoring techniques in the field of geotechnical engineering. Apart from this, authors of about twenty papers, which were submitted to the 12th Conference of the International Association for Computer Methods and Advances in Geomechanics (IACMAG) held in Goa, India, from 1 to 6 October 2008, under the theme of “Geomechanics in the Emerging Social and Technological Age,” were invited to upgrade/modify their manuscripts as per the requirements of the journal. The paper titled “Real-time monitoring system and advanced characterization technique for civil infrastructure health monitoring” presents two successful field applications of the shape-acceleration array (SAA) system, at an active bridge realignment site in The Netherlands. The paper titled “Nonparametric monitoring for geotech- nical structures subject to long-term environmental change” presents a nonparametric, data-driven methodology of mon- itoring for geotechnical structures subject to long-term environmental change. For validating this methodology, data from a full-scale retaining wall, which has monitored for three years, has been used. The paper titled “Field assessment and specification review for roller-integrated compaction” presents an overview of two technologies: compaction meter value (CMV) and machine drive power (MDP), an overview of factors influ- encing statistical correlations, modeling for visualization and characterization of spatial nonuniformity, and a brief review of the specifications being used by the professionals. The paper titled “Experimental and numerical study of at- rest lateral earth pressure of overconsolidated sand” presents an interesting experimental and numerical investigation of at- rest lateral earth pressure resulted due to sandy soil adjacent to retaining walls. The paper titled “Seeing through the ground: the potential of gravity gradient as a complementary technology” describes a multisensor device to locate buried services. The paper titled “Stability evaluation of volcanic slope subjected to rainfall and freeze-thaw action based on field monitoring” aims at clarifying the aspects related to the stability of in situ volcanic slopes subjected to rainfall and freeze-thaw action.

AdvancesinInstrumentationandMonitoring ...downloads.hindawi.com/journals/ace/2011/871406.pdf · protection are some of the many reasons for geotechnical instrumentation. ... Age,”

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: AdvancesinInstrumentationandMonitoring ...downloads.hindawi.com/journals/ace/2011/871406.pdf · protection are some of the many reasons for geotechnical instrumentation. ... Age,”

Hindawi Publishing CorporationAdvances in Civil EngineeringVolume 2011, Article ID 871406, 2 pagesdoi:10.1155/2011/871406

Editorial

Advances in Instrumentation and Monitoringin Geotechnical Engineering

D. N. Singh,1 Nagaratnam Sivakugan,2 and Sai K. Vanapalli3

1 Department of Civil Engineering, Indian Institute of Technology Bombay, Mumbai 400076, India2 Civil and Environmental Engineering, School of Engineering and Physical Sciences, James Cook University,Townsville, QLD 4811, Australia

3 Civil Engineering Department, University of Ottawa, A112, 161 Louis Pasteur, Ottawa, ON, Canada K1N 6N5

Correspondence should be addressed to D. N. Singh, [email protected]

Received 11 November 2011; Accepted 11 November 2011

Copyright © 2011 D. N. Singh et al. This is an open access article distributed under the Creative Commons Attribution License,which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Geotechnical instrumentation to monitor the performancesof earth and earth-supported structures is increasinglybecoming popular. Verification of long-term performances,validation of new theories, construction control, warningagainst any impending failures, quality assurance, and legalprotection are some of the many reasons for geotechnicalinstrumentation. They are not only used in field situations,but in laboratories too. With the recent advances in materialsand technology, and the need for more stringent perfor-mance control, there had been significant developments inthe recent past in instrumentation and monitoring tech-niques.

We are thankful to Hindawi Publishing Corporation forinviting us to act as Guest Editors of this special issue.The main focus of this special issue is to document therecent advances in the instrumentation and monitoringtechniques in geotechnical engineering. Authors were invitedto disseminate their research findings and recent advancesin the instrumentation and monitoring techniques in thefield of geotechnical engineering. Apart from this, authorsof about twenty papers, which were submitted to the 12thConference of the International Association for ComputerMethods and Advances in Geomechanics (IACMAG) heldin Goa, India, from 1 to 6 October 2008, under the themeof “Geomechanics in the Emerging Social and TechnologicalAge,” were invited to upgrade/modify their manuscripts asper the requirements of the journal.

The paper titled “Real-time monitoring system andadvanced characterization technique for civil infrastructurehealth monitoring” presents two successful field applications

of the shape-acceleration array (SAA) system, at an activebridge realignment site in The Netherlands.

The paper titled “Nonparametric monitoring for geotech-nical structures subject to long-term environmental change”presents a nonparametric, data-driven methodology of mon-itoring for geotechnical structures subject to long-termenvironmental change. For validating this methodology, datafrom a full-scale retaining wall, which has monitored forthree years, has been used.

The paper titled “Field assessment and specification reviewfor roller-integrated compaction” presents an overview oftwo technologies: compaction meter value (CMV) andmachine drive power (MDP), an overview of factors influ-encing statistical correlations, modeling for visualization andcharacterization of spatial nonuniformity, and a brief reviewof the specifications being used by the professionals.

The paper titled “Experimental and numerical study of at-rest lateral earth pressure of overconsolidated sand” presents aninteresting experimental and numerical investigation of at-rest lateral earth pressure resulted due to sandy soil adjacentto retaining walls.

The paper titled “Seeing through the ground: the potentialof gravity gradient as a complementary technology” describesa multisensor device to locate buried services.

The paper titled “Stability evaluation of volcanic slopesubjected to rainfall and freeze-thaw action based on fieldmonitoring” aims at clarifying the aspects related to thestability of in situ volcanic slopes subjected to rainfall andfreeze-thaw action.

Page 2: AdvancesinInstrumentationandMonitoring ...downloads.hindawi.com/journals/ace/2011/871406.pdf · protection are some of the many reasons for geotechnical instrumentation. ... Age,”

2 Advances in Civil Engineering

The paper titled “A methodology for determination ofresilient modulus of asphaltic concrete” deals with develop-ment of a novel methodology that has been found to be quiteuseful for determining the resilient modulus of the materialquite precisely.

The paper titled “A controllable approach to rectify inclinedbuildings” describes a safe construction and instrumentationtechnique to rectify the inclined buildings.

D. N. SinghNagaratnam Sivakugan

Sai K. Vanapalli

Acknowledgments

We are much thankful to the reviewers for extending theirhelp, support, and guidance in bringing out this issue. We arethankful to the authors for extending their fullest coopera-tion in preparing the manuscripts as per the guidelines of thejournal, taking into account the additional review comments.We acknowledge the IACMAG for approving publication ofthe following papers in this edition of the journal.

Page 3: AdvancesinInstrumentationandMonitoring ...downloads.hindawi.com/journals/ace/2011/871406.pdf · protection are some of the many reasons for geotechnical instrumentation. ... Age,”

International Journal of

AerospaceEngineeringHindawi Publishing Corporationhttp://www.hindawi.com Volume 2010

RoboticsJournal of

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

Active and Passive Electronic Components

Control Scienceand Engineering

Journal of

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

International Journal of

RotatingMachinery

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

Hindawi Publishing Corporation http://www.hindawi.com

Journal ofEngineeringVolume 2014

Submit your manuscripts athttp://www.hindawi.com

VLSI Design

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

Shock and Vibration

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

Civil EngineeringAdvances in

Acoustics and VibrationAdvances in

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

Electrical and Computer Engineering

Journal of

Advances inOptoElectronics

Hindawi Publishing Corporation http://www.hindawi.com

Volume 2014

The Scientific World JournalHindawi Publishing Corporation http://www.hindawi.com Volume 2014

SensorsJournal of

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

Modelling & Simulation in EngineeringHindawi Publishing Corporation http://www.hindawi.com Volume 2014

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

Chemical EngineeringInternational Journal of Antennas and

Propagation

International Journal of

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

Navigation and Observation

International Journal of

Hindawi Publishing Corporationhttp://www.hindawi.com Volume 2014

DistributedSensor Networks

International Journal of