Upload
duongtruc
View
240
Download
0
Embed Size (px)
Citation preview
01
Prox
imity
Sens
ors
Visio
n &
Saf
ety
Sens
ors
Mea
sure
men
tSe
nsor
sCo
ntro
lW
eigh
ing
Auto
mat
ion
Com
pone
nts
Phot
oele
ctric
Sens
ors
Mea
sure
men
t Se
nsor
s
Digital Pressure SensorPSD
www.inno.sg/psd
3 Color Display 7 Programmable Units Key lock, Display o� Function NPN, PNP, 4-20mA & 1-5V outputs Wide measurement range -1~10 bar
SALIENT FEATURES
2 3 41
Model Number Legend
2. Type
V: Vacuum (0 ~ -1 bar)
P: Positive (-1 ~ 10 bar)
C: Compound (-1 ~ 1 bar)
3. Output
N2: 2 NPN - NO/NC Outputs
P2: 2 PNP - NO/NC Outputs
NC: NPN - NO/NC & 4-20mA Analog Outputs
PC: PNP - NO/NC & 4-20mA Analog Outputs
NV: NPN - NO/NC & 1-5V Analog Outputs
PV: PNP - NO/NC & 1-5V Analog Outputs
4. Connection
2M: 2m Cable
M12J3: M12 Junction Connector with 0.3m extension
1. Series
PSD
Example:PSD-PPC-2M
PSD Series - Positive Pressure Type - PNP NO/NC & 4-20mA Outputs - 2m Cable
Advanced Function Type
NOTE: Contact us for models not shown in catalogue. Connector cables are sold separately; look in CC series catalogue for the same (www.inno.sg/cc).
02
Prox
imity
Sens
ors
Visio
n &
Saf
ety
Sens
ors
Mea
sure
men
tSe
nsor
sCo
ntro
lW
eigh
ing
Phot
oele
ctric
Sens
ors
Auto
mat
ion
Com
pone
nts
Mea
sure
men
tSe
nsor
s
Product Highlights PSD
www.inno.sg/psd
The sensor has a key lock function to prevent unauthorized change of set values.The keylock indication is displayed when enabled.The output indication icons 1, 2 for the 2 outputs are displayed either side of the Setting display if the output is on.
♦ Keylock & Output IndicationUser selectable pressure units are provided in the digital display eliminating the need of a fixed pressure unit label.7 user selectable pressure units are available.
♦ Changeable Pressure Units
Output Indications
The PSD series operates in two modes. Normal mode and power saving mode.In the sleep mode the sensor continues to operate normally but the display is turned off.This reduces the power consumption of the unit by upto 30%.
♦ Power Saving ModeThe PSD sensor is stack mountable.Just one panel cut out is required for mounting as stackable displays; either horizontally or vertically. This saves space and labour during assembly.
♦ Stackable
The PSD series pressure sensor has a 2 color display that can be configured to change color with the output status. i.e. Green <--> Red & Red <--> Green.
♦ Color Change Digital Display!The PSD series comes with a dual display. The larger Main Display is a 2 color display for display of the current Process Value (PV), the smaller Sub Display is one color (orange) for setting and Set Value (SV) display.
♦ Dual Display !!
Main Display (PV)
Setting Display (SV)
The PSD series comes with raised rubber buttons that are clearly set apart, simple to operate and soft to touch. These buttons have a long life and is resistant to wear due to usage unlike the membrane keypads.
♦ More user friendly buttons
03
Prox
imity
Sens
ors
Visio
n &
Saf
ety
Sens
ors
Mea
sure
men
tSe
nsor
sCo
ntro
lW
eigh
ing
Auto
mat
ion
Com
pone
nts
Phot
oele
ctric
Sens
ors
www.inno.sg/psd
Mea
sure
men
tSe
nsor
s
2 NPN PSD-VN2-2M PSD-VN2-M12J3 PSD-PN2-2M PSD-PN2-M12J3 PSD-CN2-2M PSD-CN2-M12J3
1 NPN + 4-20mA PSD-VNC-2M PSD-VNC-M12J3 PSD-PNC-2M PSD-PNC-M12J3 PSD-CNC-2M PSD-CNC-M12J3
1 NPN + 1-5V PSD-VNV-2M PSD-VNV-M12J3 PSD-PNV-2M PSD-PNV-M12J3 PSD-CNV-2M PSD-CNV-M12J3
2 PNP PSD-VP2-2M PSD-VP2-M12J3 PSD-PP2-2M PSD-PP2-M12J3 PSD-CP2-2M PSD-CP2-M12J3
1 PNP + 4-20mA PSD-VPC-2M PSD-VPC-M12J3 PSD-PPC-2M PSD-PPC-M12J3 PSD-CPC-2M PSD-CPC-M12J3
1 PNP + 1-5V PSD-VPV-2M PSD-VPV-M12J3 PSD-PPV-2M PSD-PPV-M12J3 PSD-CPV-2M PSD-CPV-M12J3
kPa
Mpa
kgf/cm2
bar
psi
inHg
mmHg
Prewired 2 meter cable
M12 Jn. Connector, 0.3m extension
Prewired 2 meter cable
M12 Jn. Connector, 0.3m extension
Prewired 2 meter cable
M12 Jn. Connector, 0.3m extension
Type
Rating
Hysterisis
Repeatability Error
Response time
Current Output
Voltage Output
Main Display
Sub Display
Weight
Material
Cable type: approx. 80g; Junction Connector type: approx. 45g
IP 40
Housing: ABS; Front Case: PC
Operation: 30 ~ 80% RH; Storage: 35 ~ 85% RH (non- condensing)
Ambient Temperature
Output Short Circuit Protection; Reverse Polarity ProtectionProtection Circuits
Protection Class
50 MΩ min. ( at 500 VDC) between case and lead wire
1000 VAC (between lead and case) for 1 minuteWithstand Voltage
Insulation Resistance
Ambient Humidity
Control Output
2.5ms (selectable Chatter-proof function: 24ms, 250ms, 500ms, 1000ms and 1500ms)
3 digit - 2 Color (Red, Green) 7 segment display
3 digit - 1 Color (Orange) 7 segment display
Output 1 &2 orange indication in display
7 user changeable pressure units, key lock indication, sleep mode indication
Vibration Resistance
10G, 3 times each in direction of X, Y and Z
1.5mm amplitude at 10-50 Hz for 2 hours each in direction of X, Y and Z
Operation: 0° ~ 50°C; Storage: -10° ~ 60°C (non- freezing; non- condensing)
Output Current: 4~20mA ±2.5% F.S; Linearity: ±1% F.S; Max. Load Impedance: 600 Ω at 24V
Output Voltage: 1~5V ±2.5% F.S; Linearity: ±1% F.S; Output Impedance: 1 kΩ
max. ±0.2% F.S
Operating Mode One Point Teach Mode; Hysterisis Mode; Window Mode
Adjustable; Hysterisis value is adjustable within 1-8 digits for one point teach & window mode
40 mA at no load
NPN or PNP open collector output (depending on model)
Load Voltage: max. 24 VDC; Load Current: max. 125mA; Residual Voltage: max. 1.5V
0.01
0.01
0.001
-
12 to 24 VDC ±10%
0.1
1-
-
0.1
0.1
-
0.001
0.001
0.01
Pressure Set
Resolution
0.1
-
0.001
0.001
0.01
0.1
1
300 kPa 300 kPa1500 kPa
1/8" NPT, M5
Compound
10.0 ~ -101.3 kPa
0.0 ~ -101.3 kPa 0.0 ~ 1000.0 kPa
-100.0 ~ 1000.0 kPa
-100.0 ~ 100.0 kPa
-101.0 ~ 101.0 kPa
Gauge Pressure
Shock Resistance
Output Indication
Other Indication
Connection
Power Supply
Current Consumption
Analog Output
Display
Applicable Fluid
Withstand Pressure
Air, Non- corrosive & Non- flammable gas
Type
Display Pressure Range
Rated Pressure Range
Models
Vacuum Positive
Pressure Type
Pressure Port Type
Ratings and Speci�cations PSD
04
Prox
imity
Sens
ors
Visio
n &
Saf
ety
Sens
ors
Mea
sure
men
tSe
nsor
sCo
ntro
lW
eigh
ing
Phot
oele
ctric
Sens
ors
Auto
mat
ion
Com
pone
nts
www.inno.sg/psd
Sensor Dimension Drawing PSD
30
30
21
3 315
6
9
2439.5
20
20
Side Mounting Bracket
Ordering Code: BT-3
Ø4
20
20
4.2
5 20
29.5
1.613
45
Top Mounting Bracket
Ordering Code: BT-4
Ø4
4.2
5
20
20
20
29.5
1.6
13
45
Note: Brackets are not provided along with the sensor and are to be ordered separately. All dimensions are in mm
Mea
sure
men
tSe
nsor
s
05
Prox
imity
Sens
ors
Visio
n &
Saf
ety
Sens
ors
Mea
sure
men
tSe
nsor
sCo
ntro
lW
eigh
ing
Auto
mat
ion
Com
pone
nts
Phot
oele
ctric
Sens
ors
www.inno.sg/psd
Mea
sure
men
tSe
nsor
s
Sensor Dimension Diagram
Connection
PSD
Note: * - Connector Cable is not supplied along with unit
1 : DC 10~30V2 : Control Output 13 : 0 V4 : Control Output 2/ Analog Output
• Cable
NPN O/P1
PNP O/P1
1-5V Load
Brown
Black
White
Blue
♦ 1 Digital + 1 Analog Voltage Output
NPN O/P1
PNP O/P1 4-20mA Load
Brown
Black
White
Blue
♦ 1 Digital + 1 Analog Current Output
• M12 Junction Connector *
NPN O/P1
PNP O/P1
NPN O/P2
PNP O/P2
Brown
Black
White
Blue
♦ 2 Digital Output
Brown : DC 10~30VBlue : 0 V
Black : Control Output 1White : Control Output 2/ Analog Output
4
34.4
34.4
Panel Adapter
Ordering Code: PA-3
3330.2
33
30.2
Panel Adapter
Ordering Code: PA-4
34.4
34.4
8.5
Protective Cover
Ordering Code: FPC-2
Note: Panel adapter and Protective covers are not supplied along with the product and are to be ordered separately. Panel adapter PA-3 & PA-4 are to be ordered together.
All dimensions are in mm
06
Prox
imity
Sens
ors
Visio
n &
Saf
ety
Sens
ors
Mea
sure
men
tSe
nsor
sCo
ntro
lW
eigh
ing
Phot
oele
ctric
Sens
ors
Auto
mat
ion
Com
pone
nts
Mea
sure
men
tSe
nsor
s
Control Output Diagram PSD
www.inno.sg/psd
Mai
n Ci
rcui
t
Brown
Black
White Load
max. 125mA
Blue
12~24VDC
1 NPN + 1-5V Analog Voltage Output Type
(1-5V Analog O/P)
1KΩ
Brown
Blackmax.
125mABlue
12~24VDC
1 PNP + 1-5V Analog Voltage Output Type
Mai
n Ci
rcui
t White(1-5V Analog O/P)
1KΩ
Load
Mai
n Ci
rcui
t
Brown
Black
White
Load
max. 125mA
4-20mABlue
12~24VDC
1 NPN + 4-20mA Analog Current Output Type
Load
Brown
Blackmax.
125mABlue
12~24VDC
1 PNP + 4-20mA Analog Current Output Type
Mai
n Ci
rcui
t White
Load
4-20mA Load
Mai
n Ci
rcui
t
Brown
Black
Load
max. 125mA
max. 125mA
Blue
12~24VDC
2 NPN Output Type
White
Load
Brown
Blackmax.
125mABlue
12~24VDC
2 PNP Output Type
Mai
n Ci
rcui
t White
Load
max.125mA
Load
Nomenclature
Pressure Unit
Main Display (PV)
Sub Display (SV)
Output 2 Indication
Output 1 Indication
Up/ Increase Button Down/ Decrease Button
Lock Indication
Setting Button
07
Prox
imity
Sens
ors
Visio
n &
Saf
ety
Sens
ors
Mea
sure
men
tSe
nsor
sCo
ntro
lW
eigh
ing
Auto
mat
ion
Com
pone
nts
Phot
oele
ctric
Sens
ors
www.inno.sg/psd
Mea
sure
men
tSe
nsor
s
Output Characteristics PSD
NOTE:In case hysteresis is set at less than or equal to 2 digits, switch output may chatter if input pressure �uctuates near the set point.In Window Comparator mode, the di�erence between two set points must be greater than the �xed hysteresis or output may mal�nction.
• Voltage Output Type
• Digital Output Type
♦ Positive, Compound Pressure ♦ Vacuum Pressure
One-Point Set Mode One-Point Set Mode
Normally Open Normally Close Normally Open Normally Close
Hysteresis ModeHysteresis Mode
Normally Open Normally Close Normally Open Normally Close
Window Comparator Mode Window Comparator Mode
Normally Open Normally Close Normally Open Normally Close
MPakPakPa
♦ Compound Pressure ♦ Vacuum Pressure ♦ Positive Pressure
08
Prox
imity
Sens
ors
Visio
n &
Saf
ety
Sens
ors
Mea
sure
men
tSe
nsor
sCo
ntro
lW
eigh
ing
Phot
oele
ctric
Sens
ors
Auto
mat
ion
Com
pone
nts
Mea
sure
men
tSe
nsor
s
Output Characteristics PSD
www.inno.sg/psd
Pressure Range
Vaccum
PSD-V�-�
0.0 ~ 101.3 kPa
10.0 ~ 101.3 kPa
Positive
0 ~ 1000 kPa
100 ~ 1000 kPa
PSD-P�-�
Compound
-100 ~ 100 kPa
-101 ~ 101 kPa
PSD-C�-�
Type
Model
Rated Pressure Range
Setting Pressure Range
1000 kPa
100.0 kPa
-101.3 kPa0
♦ Pressure Characteristic
Volta
geO
utpu
t (V
)
Curr
ent O
utpu
t (m
A)
Pressure (kPa)
0
1
2
3
4
5
6
20 40 60 80 100
4
8
0
12
16
20
24
♦ Linear CharacteristicVo
ltage
Out
put
(V)
Curr
ent O
utpu
t (m
A)
Pressure (kPa)
0
1
2
3
4
5
6
20 40 60 80 100
4
8
0
12
16
20
24
• Analog Output Voltage( 0-5V) & Current( 4-20mA)
MPakPakPa
• Current Output Type
♦ Compound Pressure ♦ Vacuum Pressure ♦ Positive Pressure
Exclusively Represented by:
© INNO, Rights ReservedIn the interest of continious product improvement
speci�cations are subject to change without notice
Intech Systems Chennai Pvt LtdS-2, Guindy Industrial Estate
Chennai - 600 032. Ph: 4353 8888Email: [email protected]
www.inno.sg
09
Prox
imity
Sens
ors
Visio
n &
Saf
ety
Sens
ors
Mea
sure
men
tSe
nsor
sCo
ntro
lW
eigh
ing
Auto
mat
ion
Com
pone
nts
Phot
oele
ctric
Sens
ors
www.inno.sg/psd
Mea
sure
men
tSe
nsor
s
Mounting and Adjustments PSD
Cat.
No.
PSD
-512
♦ Bracket Mounting
Mount the bracket to the body using two M3x5L mounting screws. Use any M3 screw to secure the bracket to the mount-ing surface. Tightening torque should be between 0.5- 0.7 Nm
To release the sensor from the panel, push the clips outward as shown in the picture, and pull the panel adapter towards you.
♦ Panel mounting
♦ Installation Precautions
When mounting, always use the wrench on the metal nut before the pressure port. Do not use the wrench on the plastic body, it might damage the sensor.
Over tightening may cause damage to the pressure port thread, mounting bracket and the sensor. Under tightening may result in leak. Apply the appropriate pressure to tighten the unit.Apply pressure and power only after completion of all wiring, configuration and pressure pipe mounting. Inspect for signs of leak after installation.
NOTE: Tightening torque of the wrench can be a maximum of 30 Nm only.
M3x5L
M3x5L
M3x5L
M3x5L
Panel AdapterPA-3
Panel AdapterPA-4
Panel
Claw