• View

  • Download

Embed Size (px)



Text of ADVA FSP 3000


OSA ADVA FSP 300031 January 2012Robust design and superior coverage, backed by expertsOpenreach makes every effort to ensure the information in this report is accurate at the time of compilation, however, Openreach does not represent that it is complete and Communications Providers should check with Openreach for the latest available information. Openreach reserves the right to modify delivery criteria and delivery dates.

The OSA FSP 3000 is supplied in association with ADVA Optical NetworkingAbout ADVA

ADVA Optical Networking equipment provides Openreach with unparalleled flexibility in multiplexing, transporting and protecting high-speed data, storage and video applications. It has a long established working relationship with the BT Group and Openreach in particular, and continues to develop joint solutions to address the future market needs around high-speed Ethernet, cloud, storage and infrastructure services.

ADVA FSP 3000 - Overview Enhanced optical terminating equipment from ADVA Optical Networking Supersedes the ADVA FSP 2000 Attractive entry level prices Commercial & technical flexibility (via Slimline 1U & 7U chassis) Route distance range - up to 100km available Significant space and power savings Wide range of flexible options for design Additional resilience capability for RO1 circuits Improved management and availability of technical data for customers.

Lead times targeted at 35 working days for forecast orders

System latencyInitial view available at pre design stage with actuals upon installation

ADVA FSP 3000 - chassisA fully featured, high capacity chassis, with slimline (1U) and 7U options which provides the flexibility to meet an extensive range of needs at a great price. Slimline 1U chassis 1U has a double card slot capability. This can run either without filters (max 1 wavelength) or with an additional 1U passive filter shelf (max 4 wavelengths) Standard and RO2 bearer options Ideal to deliver higher volumes of 1Gig services

Standard 7U chassis Chassis capacity - 12 channels, less if double-width transponders or RO1 used. Bearer will have capacity for 32 optical channels, in most cases this will require 3 chassis, but could be more if double-width cards are used Standard, RO1* and RO2 bearer options Future FSP 3000 developments mid point amps, and rings & chains

* RO1 uses a protection module known as the VSM card. This will protect against fibre breaks only and will use one wavelength on the bearer, leaving 31 for customer use.

ADVA FSP 3000New slim line 1U chassisSingle (1 slot) with RO2 option 1U high chassis for a single wavelength (all card types) Compact service option Can be upgraded by adding expansion filters and chassis.

1U chassis offers a choice of configurations and a low entry price product to meet light initial requirements. Uses less space in the exchange and provides an ideal solution where there is limited space to terminate an Optical service. The single (1 slot) option allows you to start small with lower risk.

Standard (2 slots) with RO2 option Enables the build of a mini Optical system to cater for up to four wavelengths Can be grown by adding extra modules.

1U chassis 2 slots

Choosing an additional filter pack (standard option) will enable you to grow capacity easily (up to 4 wavelengths) and at your own pace.

Passive shelf required for filters

ADVA FSP 30007U high chassis optionA fully featured, high capacity chassis which provides the flexibility to meet an extensive range of needs at a great price. 16 slots available for all card types including transponders, filters, protection cards and optical supervisory cards 12 channel chassis capacity (less if double-width transponders or RO1 used) 32 optical channel** bearer capacity (in most cases this will require 3 chassis, more if double-width cards are used) Resilient options RO1 and RO2.

ADVA FSP 3000 v FSP 2000FSP 2000 features 35 km radial distance NEW FSP 3000 features Approx. 51-55 km max radial distance. 103km route distance 35 days lead time (for forecast orders) Choice of 1U and 7U chassis Chassis Capacity 12 channels, less if doublewidth transponders or RO1 used. Bearer has capacity for 32 optical channels, in most cases this will require 3 chassis, but could be more if double-width cards are used. 2.5Gb, 4Gb or 10Gb or a combination of both on each bearer, depending on fibre characteristics and the overall distance between the sites to be connected Resilience Options 1 and 2 (RO1 and RO2) available over full length of circuit

57 days lead time5U chassis Chassis capacity - slot capacity for 8 single-width transponders. To support 32 optical channels, 4 chassis are required 2.5Gb or 10Gb or a combination of both on each bearer, depending on fibre characteristics and the overall distance between the sites to be connected Resilience Options 1 and 2 (RO1 and RO2) available on unamplified section of circuit

Full Enterprise Certification (Brocade, HP, IBM, Fujitsu, Hitachi, EMC2, NEC and Juniper Networks) Five hour guaranteed repair time Proactively monitored with optional fibre and wavelength protection Subject to design considerations, existing wavelengths can be easily upgraded and interfaces can be changed to keep up with changing customer demands Low latency Secure un-contended bandwidth A choice of 1, 3 or 5 year minimum periods

Distance supportThe FSP 3000 provides increased distance support by means of end point optical amplifiers. Distances of up to 103km route (approx 50-55km radial) will be supported. It has been agreed that planning rules will be introduced so that 4Gig cards can be deployed with a shorter reach.2.5Gb & 10Gb Enterprise & Core Cards 5 Port D09534 10 Port D09532 Single Port D09526 Single Port D09527 Dual Port D09528 (km)

Service offering

10Gb Access Card Dual Port D09533 (km)

4Gb Access Cards 4 Port D09529 4 Port D09530 (km)

10Gb Core Card Dual Port D09531 (km)

OSA RO1 with booster + pre-amp





OSA standard & RO2 with booster + pre-amp





ADVA FSP 3000 card optionsCard optionsSingle port cards






STM16, STM-4, STM-1, OTU1STM64, 10GbE WAN, 10GbE LAN and 10G FC, OTU2

Multi-port cards 4 port (Data) 4 port (TDM) 10 port D09529 D09530 D09532 4Gb 4Gb 10Gb GEx4, 1Gb FCx4, 2Gb FCx2, 4Gb FC, 2G Coupling Link STM1x4, STM4x4, 1GEx4 GEx9, 1Gb FCx10, 2Gb FCx5, 4Gb FCx2, STM1x10, STM4x10, STM16x3 STM16, 1GFCx2 GbEx2, OTU1 STM64, 10GbE WAN, 10GbE LAN, 4Gb FC 8Gb FC, OTU2 (10GFC not supported) STM64, 10GbE WAN, 10GbE LAN, 4Gb FC, 8GFC, OTU2 (10GFC not supported) *Low latency card* 1Gb/2Gb/4Gb/8Gb/10Gb FC, GE, 10GE (LAN PHY only)

2 port 2 port 2 port

D09528 D09531 D09533

2.5Gb 10Gb 10Gb

5 port


Max 10Gb

A quality service from a credible supplier Experts backed by experts - solutions designed by highly qualified teams and supported by our equipment vendors, ensure they are the very best that can be provided Your promises are our promises circuits that are installed on time, every time so you can keep your promises to your customers Dedicated fibre avoid the hidden risks of a shared infrastructure and get exactly what you pay for with full control on additional bandwidth/wavelength requirements True resilience our resilient paths use dedicated fibre too, so youll never have to compromise should the worst happen

Range of service interfaces to meet any customer requirementUK wide coverage expand to new sites later without the worry of being off net, incurring extra charges or finding you cant Choice of minimum period options one, three or five years.

Our commitment to you

We know that one size does not fit all

We will always make sure we understand what you need

We will make sure we offer you the solution that best meets your individual needs

We will make sure you understand the solution we are offering and well help you brief your colleagues We reserve fibre capacity for you when we quote, so that you know its available when you place an order

We will show you how what we are offering helps you save or make money

The delivery date is our promise to you well even try to beat it and often we do

Expert advice that really countsTo ensure your optical network investments work as hard for you as possible well help you: Make choices that meet your longer term requirements Avoid solutions that will restrict your ability to expand See through solutions that are cheap at first, but force you to invest again later Understand exactly what youll be risking if you choose a shared infrastructure.

If youre new to Optical solutions, or need our advice, well help you understand:

When it makes sense to switch from multiple circuits How to add optical circuits to improve business continuity in your existing network How optical solutions can help you save thousands of pounds on space and power.

New to Openreach Optical products?If so we need to do a few things to get you started: Explain the process and provide all the advice and guidance you need Answer all your questions about working with us Provide product information/guidance if needed Complete all the details necessary to set you up on our systems.

Our establishment process ensures you are ready and able to order OSS: Normally takes between two and six weeks to complete.

What next? Spend time making sure we fully understand what you need Carry out a survey and agree the design with