Product Highlights PRO E-Series detectors deliver exceptional savings of time and total cost of ownership.

• Designed to be compliant to prEN 50606 Grade 3

• IP65-rated housing for all models• iCommission enabled for one man

commissioning and installation• Integrated Cable Management

Invisible cable routing for tamper protection• Remote confi guration and alarm

management via RS485-communication• Auto-sensing supply voltage

10.5-30 VDC and 24 VAC

• Low power consumption - ideal for wireless and solar applications

Providing maximum tamper protection• “360PROtectTM” Technology - near

surrounding area surveillance, as a special tamper protection of the detector - from 1 m behind the pole/ wall up to 8m - eliminates all creep zones

• Detects attempted removal from mounting surface

• Advanced 3D-tamper detection signals an alarm if detector alignment is altered, in addition to traditional housing cover switch

• Detector masking detection• Up to 4 m (13 ft) mounting height

to minimise the risk of vandalism

Highest reliability of detection — minimising nuisance alarms• Directional discrimination for additional

60% nuisance alarm reduction (De-models only), allowing for right-to-left or left-to-right intrusion alarms only

• Heater and heavy-duty silicon wafer front window for -40° to +60º C (-40° to 140ºF) operating temperature, ideal for extreme environments (standard for H-models)

• Detection of intruders crawling, walking or running at speeds from 0.2 to 5 m/s (0.7 to 16 ft/s)

• Ultra-low nuisance alarm rate thanks to advanced digital signal processing (DSP), and adaptive threshold discrimination

• Low cost per unit of coverage cutting edge and manufactured precision engineering results in a highly reliable, cost effi cient product

Accessories• iCommission - One-Man-Commissioning-

Tool including iCommission-App for remote controlled tilt adjustment

• PRO E-Tool - confi guration, commissioning, analysis and remote control software

• IFM-485-ST - PC interface module including PRO-E-Tool software for PC-based installation, commissioning, maintenance and alarm management of all PRO detectors

• CT PRO 2 - wireless walk-tester (2.4 GHz) for all PRO detectors

• AD 851 - alignment telescope for all models

ADPRO PRO SeriesPassive Infrared Perimeter Intrusion Detector

Preliminary Data Sheet

The complete new portfolio of ADPRO PRO E-PIR Perimeter Intrusion Detectors (PID) were engineered to provide extraordinary reliability and accuracy. This new generation of PIRs evolved from the Xtralis defense-grade perimeter protection technology and our proven series of ADPRO PRO PIRs.

Utilising Passive Infrared (PIR) technology and combining it with precision mirror optics, employing the latest digital signal processing (DSP) and an environmental adaptive circuitry - this provides the exceptional reliability of detection while minimising nuisance alarms.

ADPRO PRO E-Series detectors achieve unsurpassed performance even under precarious environmental conditions. The ADPRO PRO E-Series PIR detectors are available in a variety of models to optimally address your perimeter, performance, and budget needs.

PRO E-Series - Extraordinary FeaturesComplete New Housing Design• Designed for wall and pole mounting - no additional adaptors required• Integrated cable management - no visible cable routing directly from mounting surface• Designed for one-man installation with the iCommission tool which allows for wireless control

of the PIR detectors via the iCommission application installed on a smartphone or tablet PC• Simple on-site exchange of the fi lter module (window) - no detector factory overhaul• Sophisticated 3D-tamper (pan/tilt/move) protection including a compass (slow panning)• Detection of attempted removal from mounting surfaces also includes cable managed bracket• Prepared for further enhancements and options - such as IP connectivity, wireless

communication or even battery operation (in combination with renewable energy sources)“360PROtectTM” Technology - Near Surrounding Area Surveillance• Special tamper protection of the detector - eliminating creep zones• Creep zone surveillance starts 1m behind the detector (back sight)Detector Masking• Manipulation, vandalism, and/or tampering of the detector’s input capability with objects

such as metal, plastics, paper or sprayed paints or lacquers in close proximity to the detector are detected and indicated as required by upcoming IEC- and EN-standards for perimeter detectors

Quick Setup• No hardware programming via DIP-switches – just select the appropriate detector and turn the

rotary switch to the right position and all default settings are done• Via standard RS-485-communication all parameters can be adapted

ADPRO PIR Series Data SheetInnovation

360PROtectTM - Near Surrounding Area SurveillanceThis Xtralis technology provides special tamper protection for all ADPRO PRO E-detectors. This innovation provides protection from 1 m behind the pole/wall installation up to 8 m - completely eliminating all creep zones. Cost savings and superior protection are realized with one ADPRO PRO E-detector; creep zones are eliminated and the areas behind and aside the detector are monitored.

Regarding tamper security 360PROtectTM technology puts ADPRO PRO E-detectors unambiguous on leading position.

Sophisticated Tamper ProtectionAll ADPRO PRO E-detectors monitor:• opening of detector housing and mounting

bracket cover• horizontal, vertical and pitch alignment• slow horizontal movements with the help of

an integrated switchable digital compass• removal from mounting surfaceThese features fullfi ll the highest tamper protection requirements and ensure reliable operation in the highest graded security applications.

ADPRO PIR Series Data SheetOperation

Applications• Outdoor perimeter and area detection:

- solar fi elds - pipelines - logistic centers - scrap merchants - warehouses

• Fence-line protection• Anticipating and proactive video surveillance• Providing reliable detection for remotely monitored and detector activated CCTV systems for

maximum Central Monitoring Station profi tability• Conditional triggering of CCTV, PTZ and dome cameras• Conditional triggering of video-switchers for event-driven CCTV

Recommended Ranges and PositioningADPRO PRO E-series detectors offer the best value per foot of coverage when compared to similar effective intrusion detection technologies. ADPRO has pushed the limits of the PIR technology to new frontiers, thus making it the ideal choice for cost conscious decision makers unwilling to compromise on security.Longer perimeters are easily divided into sections not exceeding the nominal range of the chosen detectors. The PRO E-detectors are designed to provide gap-free coverage in, around and behind the mounting location.

MountingRecommended mounting height is 2.5 – 4 m (8 – 13ft). All PRO E-detectors are ready-to-use on walls or poles without any adaptors and have an integrated tamper-monitored cable managed bracket.

iCommissionTM

All detectors can be vertically aligned with a smartphone or tablet PC e.g. during walk-test remotely with the optional use of iCommission. With the help of iCommission one engineer can mount, aline, and fi ne-adjust a detector - one man commissioning for noticeable cost and time savings.

Remote ServiceAll detectors are equipped with a two-way data port. Using the ADPRO PRO E-Tool software via the IFM-485-ST interface, confi guration details and live signals, as seen by the detectors, can be changed and reviewed remotely. The IFM-485-ST interface module and the ADPRO PRO E-software are very helpful during both the installation process, but also during operation later on. For example, detector confi guration changes can be applied in real time without climbing any ladders.

System Design Considerations

It is considered good design practise to terminate a detector’s fi eld of view with a barrier if the PIR fi eld of view exceeds the desired detection zone, especially if it borders onto unknown or busy terrain. Wire mesh fence alone will not work, a closed surface area is necessary, wood or plastic materials are perfectly suitable.For more details and a professional system design we strongly recommend to refer to the “Planning and Commissioning Manual” on:

www.xtralis.com/ADPRO_PRO_E_Detectors

ADPRO PRO E-Wireless Detectors - powered by Inovonics EchoStream®

Based on same technical specifi cations as wired models, Xtralis offers a supplemental range of wireless ADPRO PRO-E detectors with Inovonics´ built-in RF module EN1941:

PRO E-18WRFe, PRO E-18WRFn, PRO E-45RFe, PRO E-45RFn, PRO E-100RFe, PRO E-100RFn [-RFe = 868 MHz (EU) / -RFn = 911 MHz (USA)]

These detectors transmit alarms and fault messages one way wireless to an Inovonics receiver e.g. EE4232MR/EN4232MR or EE4216MR/EN4216MR.

The Inovonics Commercial Mesh Network has been specifi cally developed for commercial applications to provide the most cost-effective solution for a wide range of applications, while setting new standards for performance and reliability in a wireless sensor network.

Reliability

Inovonics EchoStream 868/900MHz radio utilizes a unique frequency hopping, spread spectrum technology to meet the demands of an increasingly cluttered wireless world.

Flexibility

The fl exibility of wireless is a necessity in today’s dynamic commercial environments. The self-confi guring EchoStream Commercial Mesh Network allows you to adapt to changing fl oor plans and requirements in a matter of minutes. New sensors can be added to the network as fast as they can be mounted.

Scalability

The EchoStream Commercial Mesh Network’s backbone of intelligent repeaters EE5000/EN5000 can extend coverage to thousands of sensors across entire commercial campuses.

Battery-Life-Time of 2-years

Under normal conditions a battery-life-time of 2 years is achievable, this is dependent on structure and environmental conditions of operation, number of events and other site-specifi c infl uences.

ADPRO PRO-E Detector OutputsAll ADPRO PRO E-detectors have 3 free programmable outputs for alarms from:• PIR-sensor, 360PROtectTM or masking

detection• fault events caused by the power supply,

exceeded temperatures, faulty heating device, masking detection or watch-dog

• tamper alarms of housing cover, cable managed bracket cover, misalignment and removal from mounting surface attempts

All high-performance detectors (H-versions) offer additionally two independent outputs for alarms from:• 360PROtectTM, masking or alarm zone or

other events

For plug & use, all outputs are set to standard compliant default settings, which can be changed easily with the ADPRO PRO E-Tool software.

10

8 m (26.3 ft)

0-2

0

2.5

m(8

.2ft)

1 m(3.3 ft)

1.5

m(4

.9ft)

Specifi cation / Model PRO E-18 PRO E-18H PRO E-18W PRO E-18WH PRO E-30 PRO E-40 PRO E-45 PRO E-45H PRO E-45D PRO E-45DH PRO E-51 PRO E-85 PRO E-85H PRO E-100 PRO E-100H

Item Code CH10055001 CH10055101 CH10053001 CH10053101 CH10063001 CH10073001 CH10023001 CH10023101 CH10023201 CH10023301 CH10083001 CH10043001 CH10043101 CH10033001 CH10033101

Detection principle Volumetric medium-range Volumetric wide-angle Volumetric medium-range

Volumetric medium-range Curtain, medium-range Curtain, directional,

medium-range Volumetric, long-range Curtain, long-range

Nominal range (L x W), width at nominal range

24 m x 21 m (80 ft x 70 ft)

30 m x 27 m (100 ft x 90 ft)

21 m x 24 m (70 ft x 80 ft)

27 m x 30 m (90 ft x 100 ft)

30 m x 20 m (100 ft x 65 ft)

40 m x 10 m (130 ft x 33 ft)

50 m x 3.3 m (165 ft x 11 ft)

60 m x 3.9 m (200 ft x 13 ft)

50 m x 3.6 m (165 ft x 12 ft)

60 m x 4.2 m (200 ft x 14 ft)

50 m x 22 m (165 ft x 72 ft)

60 m x 18 m (200 ft x 60 ft)

75 m x 23 m (250 ft x 75 ft)

120 m x 2.9 m (400 ft x 9 ft)

150 m x 3.3 m (500 ft x 11 ft)

Angle of beam (angle of aperture, AA) 50° 90° 50° 15° 3.8° 3.8° 4° 26° 17° 1.3°

360PROtectTM - Near Surrounding Area Surveillance -1 m up to +8 m (-3 ft up to +26 ft)

Spectral response 8-14μ, double fi ltered

Filter (Front Window) Standard versions: HDPE-Filter, IR transmissive / H-Versions: Silicon Wafer

Pyroelectric Sensor (differential) single-channel dual-channel six-channel triple-channel

Detection speed range 0.2 - 5 m/s (0.7 - 16 ft/s)

Alarm output (free programmable) 1x Alarm = IR-Alarm, 360PROtectTM-alarm, masking

Fault output (free programmable) 1x Fault = power supply, temperature, heating, masking, watch-dog,

Tamper output (free programm.) 1x tamper = housing cover, alignment, CMB cover, removal from mounting surface Free programmable output(360PROtectTM, masking, zone alarm or other events)

2x 360PROtectTM or masking or zone alarm or other events

Alarm indicator Internal LED

Data-Interface RS-485, 9600 baud/s // on-board

Default Settings- Sensitivity- Range

40%, 75%, 100% (% of standard) n.a.

n.a. 30/40/50 m 30/45/60 m 40/60/75 m 60/84/120 m 75/105/150 m

Adjustments via Tool-Software- Sensitivity

- Range

20% -140% (% of standard) Sensitivity 50–150 (% of standard)

n.a 30/40/50 m 30/45/60 m 40/60/75 m 60/72/84/96/108/120 m

75/90/105/120/135/150 m

Cable feed (diameter) 2 x 4-7 mm (0.16” - 0.27”)

Cable termination Removable screw terminals 0.34 mm2 to 1,5 mm2 (AWG 28 -16)

Supply voltage 10.5 - 30 VDC, 24 VAC ±15% auto-sensing, excluding heater

Supply current approx. 18 mA @ 12 VDC, 12 mA @ 24 VDC, 30mA @ 24 VAC (@ +25°C)

Outout load (max.) Solid State Relais 75 mA max. @ 60 VDC

Heater power (H-versions only) approx. 2 W / 176 mA @ 12 VDC at -40ºC (40ºF)Operating temperature and temperature compensation HDPE-fi lter versions without heater: -20 ºC to +60 ºC (-4 ºF to +140 ºF) // Silicon Wafer versions with heater: -40 °C to +60 °C (-40 ºF to +140 ºF) // Full compensation over entire operating temperature range

Housing material Luran® S (ASA)

IP-Rate IP 65

Environmental classifi cation Designed to fulfi ll EN50131-1 / IEC 62642-1:2010*) Environmental Classifi cation (Class IV - Outdoor) *)Scope of EN 50131-/ IEC 62642-standards are for indoor I&HAS only - not for outdoor perimeter detection!

Mounting Wall and pole mounting — cable managed bracket (CMB) included

Weight approx. 980 g (2.1 lbs), incl. cable managed bracket

Dimensions (L x W x H) 358 mm x 188 mm x 290 mm (14.1” x 7.4” x 11.4”)

Country of Origin Designed in Switzerland // Made in China

CE (incl. RoHS II, REACH, WEEE) All ADPRO PRO E-Series products fulfi ll EU-Directive 2011/65/EU (RoHS II), EC 1907/2006+2011 (REACH), EU-Directive 2002/96/EG (WEEE) or do not fall under the scope of these directives.

HTS-Harmonised Tariff Schedule 8531 9095 ECCN-Export Control Classif. Number EAR-99

Security Grading Designed to fulfi ll EN50131-1 / IEC 62642-1:2010*) Security Grades 1-4 (Grade 4 in combination with ADPRO FastTrace/IntrutionTrace, only) *) Scope of EN50131-x-/ IEC 62642- standard are for indoor I&HAS only - not for outdoor perimeter detection!

Perimeter Detection Standards Designed to fulfi ll upcoming European prEN50606-x and IEC standards (in preparation - not published)

Other Standards & Regulations British Standards: designed to fulfi ll BS 8418:2010 VdS: Designed to fulfi ll VdS 3143 (PIR), VdS3456 and VdS classes B and C (Class C in combination with ADPRO FastTrace/IntrutionTrace, only)

Technical Specifi cations — Preliminary

Detector Overview

Curtain Models Medium-range curtain Directional medium-range curtain Long-range curtain

Detector PRO E-45 PRO E-45H PRO E-45D PRO E-45DH PRO E-100 PRO E-100H

Coverage L x W(H-Version)

50 m x 3.3 m (165 ft x 11 ft)

60 m x 3.9 m (200 ft x 13 ft)

50 m x 3.6 m (165 ft x 12 ft)

60 m x 4.2 m (200 ft x 14 ft)

120 m x 2.7 m (400 ft x 9 ft)

150 m x 3.3 m (500 ft x 11 ft)

Optics Segmented Precision Mirror Segmented Precision Mirror Precision Glass Mirror

Side ViewStandard Version

(H-Version)165 ft50 m

(5 ft)1.5 m

(13 ft)4 m

10-1

10 50 m165 ft

(5 ft)1.5 m

(13 ft)4 m

-1

LMS50 ft16 m

25 ft8 m0

(13 ft)4 m

1-1

(5 ft)1.5 m

400 ft120 m

150 ft45 m

Top View,Width at Nominal Range

Standard Version (H-Version)

0-2 10 2050 m (165 ft)

30 40

3.3

m

(11

ft)0

1.65M 1:200

1.6550 -2

0

1.8

1.8

M 1:200

10 2050 m (165 ft)

30 40

3.6

m

(12

ft)

500

0-2

01.35

M 1:200

1.35 2.7

m(8

ft)

120 m (400 ft)10 20 30 40 50 60 70 80 90 100 110 120

Volume Models Volumetric Wide-Angle Volumetric Medium-Range Volumetric Long-Range

Detector PRO E-18W PRO E-18WH PRO E-18 PRO E-18H PRO E-30 PRO E-40 PRO E-51 PRO E-85 PRO E-85H

Coverage L x W(H-Version)

21 m x 24 m (70 ft x 80 ft)

27 m x 30 m (90 ft x 100 ft)

24 m x 21 m (80 ft x 70 ft)

30 m x 27 m (100 ft x 90 ft)

30 m x 20 m (100 ft x 65 ft)

40 m x 10 m (130 ft x 33 ft)

50 m x 22 m (165 ft x 75 ft)

60 m x 18 m (200 ft x 60 ft)

75 m x 23 m (250 ft x 75 ft)

Optics Segmented Precision Mirror Segmented Precision Mirror Precision Glass Mirror

Side ViewStandard Version

(H-Version)21 m70 ft

(5 ft)1.5 m

0 1

(13 ft)4 m

-1

(5 ft)1.5 m

130 ft40 m

(13 ft)4 m

10-1 -1165 ft50 m

60 ft18 m

(5 ft)1.5 m

(13 ft)4 m

10 8-1

(13 ft)4 m

0 75 m250 ft

(5 ft)1.5 m

160 ft18 m

Top View,Width at Nominal Range

Standard Version (H-Version)

15 o

0-25

10 m

(33

ft)

10 2040 m (130 ft)

0

5M 1:200

30 4090o

M 1:200

24 m

(80

ft)

10

21 m (70 ft)

0-2

0

10

10

21

(5 ft)1.5 m

(13 ft)4 m

100 ft30 m10-1

100 ft30 m

(5 ft)1.5 m

10

(13 ft)4 m

-1

50 o

20 m

(65

ft)

10 2030 m (100 ft)

0-2

0

10

10 M 1:200

30

26 o

M 1:200

10 2050 m (165 ft)

0-211

22 m

(72

ft)

0

11

30 40 50

17 o

M 1:200

10 2075 m (250 ft)

0-211.5

23 m

(75

ft)

0

11.5

30 40 50 60 70

L

M

R75

Nominal Detection Ranges — Preliminary

50 o

10 2030 m (100 ft)

0-2

0

13.5

27 m

(90

ft)

13.5 M 1:200

30

Doc. no. 25927_03

The contents of this document are provided on an “as is” basis. No representation or warranty (either express or implied) is made as to the completeness, accuracy or reliability of the contents of this document. The manufacturer reserves the right to change designs or specifi cations without obligation and without further notice. Except as otherwise provided, all warranties, express or implied, including without limitation any implied warranties of merchantability and fi tness for a particular purpose are expressly excluded.Xtralis, Xtralis logo, The Sooner You Know, VESDA, ICAM, ECO, OSID, HeiTel, ADPRO, IntrusionTrace, and LoiterTrace are trademarks and/or registered trademarks of Xtralis and/or its subsidiaries in the United States and/or other countries. Other brand names mentioned herein are for identifi cation purposes only and may be trademarks of their respective holder(s). Your use of this document does not constitute or create a licence or any other right to use the name and/or trademark and/or label.This document is subject to copyright owned by Xtralis. You agree not to copy, communicate to the public, adapt, distribute, transfer, sell, modify or publish any contents of this document without the express prior written consent of Xtralis.

www.xtralis.com

UK and Europe +44 1442 242 330 D-A-CH +49 431 23284 1 The Americas +1 781 740 2223 Middle East +962 6 588 5622 Asia +86 21 5240 0077 Australia and New Zealand +61 3 9936 7000

ADPRO PIR Series Data Sheet

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 11

Wavelength Windowin which the PRO Series are sensitive

Wavelength, µm

(C)InfraredRadiation

(B)Relative

AbsorptionCarbon Dioxide

(A)Relative

AbsorptionWater Vapour

2 3 4 5 6 7 8 9 10 11 12 13 14 15 1

The wavelength of infrared absorption of primary atmospheric constituents compared to the wavelength of infrared radiation produced by humans

Reliability

Benefi ts and Value PropositionsIntrusion detection - an “electronic fence” - in combination with alarm verifi cation - video surveillance - protects property and prevents sabotage. Technologies from Xtralis anticipate disasters by giving users time to respond before life, critical infrastructures or business continuity is compromised.

• “360PROtectTM”: Near Surrounding Area Surveillance for earliest detection of sabotage attempts and elimination of creep zones. 360PROtectTM results in less detectors, less poles and thus lowest total cost of ownership (TCO)

• “Detector Masking Detection”: Effi cient means to detect attempts to defeat the detector by manipulating (masking) with material impermeable to infrared energy, such as paper, tape, fi lm, or spray, typically during normal business hours when the security system is disarmed.“CMB Integrated”: The integrated cable managed bracket (CMB) allows completely hidden cable routing and makes tamper attacks very diffi cult

• “PA Integrated”: The completely new PRO E-detector housing is designed to be mounted directly onto a wall or a pole - no pole adaptors (PA) needed resulting in less installation cost

• “Best-in-Class by FAR”: Delivers the lowest nuisance alarm rates, thus best alarm rate• Remote access for confi guration and management (via RS-485 databus) even over IP• “Compass Inside”: An integrated switchable compass enhances the 3D-anti-vandal feature

to detect alignment changes • 4 metre (13 ft) mounting height for minimal risk of vandalism• Wide power supply range 10.5 to 30 VDC or 24 VAC (auto-sensing)• Easy on-site enhancement of all none-H-types with a silicon wafer fi lter module• All H-models have an internal heater with temperature compensation to prevent

condensation on internal components• No need for separate transmitter and receiver units - PIR-technology allows for single-ended

operation for lower installation cost• Low installation and maintenance cost

Advanced Passive Infrared Detection TechnologyAfter 25 years of positive results in favor of durable performance and longevity in harsh environments from PIR outdoor detector technology, it is now widely accepted to be well suited for perimeter protection in harsh environments.

• The area protected by the detector cannot be identifi ed by an intruder due to the passive nature of the unit

• It’s easily adaptable for small single detector installations up to large, high security multi-detector applications

Xtralis Security Solutions Overview

Xtralis offers a powerful portfolio of perimeter, multi-site and enterprise security solutions that lead the industry in reliability and value. ADPRO by Xtralis technologies deliver unparalleled situational awareness from the edge of your facility to its very core, transforming your security program from reactive monitoring to proactive threat detection.

• Intrusion Detection and Perimeter Security

• Video Recording, Transmission and Storage

• Remote Monitoring/Central Monitoring Stations

• Access Control

• Enterprise Security

• Traffi c Detection

• Mobile Security Solutions