Adamson Full Line Catalogue

BRINGING L IFE TO SOUND

Sections

IntroductionWho are we?President & CEO

ManufacturingComplete in-house manufacturing

EngineeringProgressive research

DesignAcoustic measurementPredictive software

Multi-Level SupportTechnical workshopsTurnkey systems

ProductsRigging hardware

Line ArraysLine Source TechnologyCo-Linear Drive ModuleY-Axis & T-21SubSymmetrical Drive™ TechnologySpekTrix SeriesConvertible CardioidMetrix SeriesProject Energia

MonitorsOn stageM Series

Conventional EnclosuresVersatility through choiceSX SeriesCompact EnclosuresContractor Exclusive

Contact24/7

TABLE OF CONTENTS

INTRODUCTION

Who are we?

Adamson Systems Engineering is a Canadian

manufacturing firm based 80 km outside of Toronto,

Ontario. We develop and manufacture a complete line

of innovative loudspeaker products for the professional

touring and installation markets. Designed and constructed

to exacting specifications, every stage of an Adamson

loudspeaker system is produced entirely in-house.

This meticulous craftsmanship and attention to detail

shows how seriously we believe in our ideas. Adamson’s

continued pursuit for sonic excellence has led to a

number of important patents published in key loudspeaker

technologies. From those patented principles emerged

complex sound chambers, highly engineered drivers,

and innovative rigging and cabinet designs, setting new

standards throughout the world. Our continued success

in bringing significant, leading edge technology to the

end-user, has associated the Adamson brand name with

excellence and distinction.

President & CEO Brock AdamsonIn 1983, Brock Adamson began creating sound

reinforcement systems that would open the ears and

eyes of audio engineers and designers around the world.

He envisioned a method of reproducing sound which,

even at extremely high levels, would retain the integrity

of the original waveform and preserve the subtleties of

symmetry, coherency and intelligibility – nuances most

often lost in translation.

Brock Adamson‘s passion for sound has driven the

evolution of Adamson Systems Engineering from a small

speaker shop to a company invested in its own factory,

with a broad engineering base and a wide range of

computer controlled manufacturing technology. Today

Adamson is recognized as one of the most progressive

manufacturers of loudspeaker systems in the industry.

Brock Adamson currently continues to spearhead the

design team at Adamson’s Research Laboratories,

while simultaneously planning the expansion of our

manufacturing facilities and implementation of PLC

controlled robotic automation and high-tech CNC

machinery.

MANUFACTURING

Complete in-house manufacturing

FactoryFrom raw material fabrication to the finished product,

Adamson is one of the industries only manufacturing

firms to take true advantage of industrial materials and

the industrial machinery to process them. We do not

rely on the same components that most manufacturers

are limited to. We rapid prototype, and advance our

technology, without the stress or limitations of outsourcing.

It ’s all built at home in Canada. When others are moving

to produce cabinets or entire systems off shore, we strive

to move technology forward, with the quality and integrity

that is expected in the professional audio industry.

The Machine ShopBy utilizing the latest in industrial CNC (Computer

Numerical Control) technology, Adamson produces

precision machined parts, motor assemblies, rigging

systems, punched steel and custom tooling, all with the

industry ’s most stringent tolerances. The result…

Control and consistency, that is second to none.

The Transducer ShopAdamson offers a complete range of the industry ’s most

efficient and durable, mid range compression and low

frequency transducers. As the pioneers of Kevlar cone

technology, we produce a lighter stiffer diaphragm, with

superior transient response and no fatigue over time.

Unlike other composite materials, Kevlar boasts a beautiful

balance of internal loss and mid range efficiency. Other

materials do not share this balance and either over damp

and reduce the efficiency (ie: paper), or under damp

and ring (ie: Carbon Fiber). Our unique Cones eliminate

the resonance and ringing in the passband, while

delivering smooth controlled midrange, with unrivaled

output. Recently our Research Laboratories have made

significant advancements in specialized Kevlar cone

geometries and introduced Adamson’s Advanced Cone

Architecture. Our breakthrough geometries have proven

to raise the frequency of radial cone modes and increase

the linearized passpand in our LF components, a huge

benefit in two way cabinet design. From the world’s

most powerful subwoofer, to the most efficient mid range

systems, Adamson’s Transducer Technology is a cut

above.

The Cabinet ShopAll of our rugged 11ply, 5/8” Baltic Birch cabinets are

CNC cut precisely to spec. A team of highly skilled

cabinet makers hand-finish every enclosure, before an

immaculate roadworthy coating is applied.

ENGINEERING

Progressive research

Our team of engineers utilize the most sophisticated

2D and 3D drafting tools, as well as FEA (Finite Element

Analysis) and BEA (Boundary Element Analysis) technology,

to fully envision our concepts.

Stress analysis on rigging systems, simulation of modal

behavior on Kevlar diaphragms and the study of acoustic

particle motion in waveguides and wave shaping sound

chambers, are all analyzed in our laboratories, so our R&D

department can execute and deliver the most progressive

loudspeaker systems available.

DESIGN

Acoustic measurementWe conduct extensive measurements throughout

our prototype and design processes. KLIPPEL, MLSSA,

Clio, WinMLS, PACsys and Vacs, are just a few of the

measurement tools used to gather and analyze data on

transducers, as well as finished systems.

All of our published power ratings follow the AES (Audio

Engineering Society) standard. Sensitivity is measured

with 2.83V and taken at 1m, providing consistent and

accurate data that is simple to understand and evaluate.

(some measurements are taken at 3 meters and scaled

accordingly)

AES power ratings are measured with a Pink Noise signal

extending one decade above the driver ’s lowest operating

frequency. This rating is the average RMS power, long

term, with a 6dB crest factor. (Peaks are 6dB higher than

the AES rating) Our Program Power rating is the suggested

continuous power of each amplifier channel. The driver

can be continuously driven to the amplifiers maximum

output using music as program, without failure.

PACsys FEA/Bem Analysis

WinMLS measurement

KLIPPEL measurement

Shooter® Adamson Shooter® Software is one of the most advanced

and robust array modeling and configuration software

packages available. This complete simulation package

takes full advantage of our sophisticated measurement

processes, providing real acoustic plots, taken from valid

acoustic measurements - not just theoretical numbers.

Unlike other “line array calculators”, the Shooter®

package offers 2D Vertical and Horizontal views, with

complete 3D SPL calculation. This makes it easy to edit

venue geometries, add multiple levels to a design and

evaluate accurate SPL coverage/distribution data, while

a Mechanical View and a Rigging Plot window display

precise rigging points and load information. Even when

you’re tight for time, Shooter® will deliver, period.

So we ask the question… Do you want the precision and

control of real acoustic measurement at your fingertips,

or just a basic calculator that simply cannot address the

complexities raised by modern array design?

Predictive software

MULTI-LEVEL SUPPORT

Technical workshopsIn-depth technical training workshops for end-users and

operators are available at Adamson Headquarters and

throughout the world. These workshops are tailored to your

company’s specific needs. From safe and efficient rigging

procedures to strategies for troubleshooting, fine-tuning

and optimizing array design, we give you the knowledge

to take full advantage of the many benefits that our high

performance systems and software tools offer.

Adamson provides comprehensive turnkey system

solutions. Whether you need sound design assistance,

rigging development, or a complete amplification and

processing package, we’re dedicated to seeing your

project achieve success.

As an Adamson partner, one needs to assure uniform

performance, packaging and cabling configurations,

and maintain an acceptable level of technical

expertise. This ensures performance and also maintains

consistency world-wide, allowing cross-rental or dry-hire

with peace of mind.

Adamson Engineers, in cooperation with our partners,

have developed specific performance characteristics

that are the signature of our product. Custom built

turnkey packages include Lab.gruppen amplifiers,

Adamson M and DX Series processing, XTA or LAKE

processing, UL/ULC approved breaker protected AC

distribution with twistlock or alternate connectors, A.I.D.

(Adamson Integrated Distribution) panels with Socapex

or NL8 connectors in both touring and install versions.

Shock mounted racks with slide away doors protect the

equipment, maintaining a small footprint for easy truck-

packs, while eliminating the need to store lids.

Turnkey systems

European standard racks pictured

Photo by: Fabrice LachazePhoto by: Fabrice Lachaze

AIR™ SystemThe AIR™ (Adamson Integrated Rigging) system introduces a

captive rigging concept that requires no extra hardware and

is so simple to use that a single person can set up an entire

array. Both the revolving disk (US Patent # 7,328,274) and spring

loaded rigging elements of the AIR™ system retract completely

into the cabinet when not in use and saves valuable time and

money in labour and set-up. When arrayed AIR™ hardware is

completely discreet giving a clean and unobtrusive look. The

AIR™ system allows 6 various rigging angles between each

enclosure, measured in the logarithmic scale and comes

standard with the SpekTrix Series, T-21 Sub, and the Metrix-t

Series. (Note: The AIR™ system in the Metrix Sub-t is not spring

loaded.)

PRODUCTS

Slide-Hinge RiggingAdamson’s Slide-Hinge Rigging System gets the Y-Axis Line out

of the truck and into the air quickly and easily. The Y10 system

features six one-degree increments, while the Y18 offers 11

half-degree increments, allowing precise angular positioning

by adjusting the extension of the sliding hinge. It connects at

the rear of each cabinet to the next rigging point using ball

lock pins, for safe and efficient assembly. Adamson’s Slide-

Hinge rigging system provides solid suspension for larger

scale Y-Axis arrays, and transition kits are available to allow for

combining cabinets from both the Y-Axis and SpekTrix series,

extending system flexibility and offering completely scalable

line array solutions.

Rigging hardware

EIR™ SystemMetrix-i introduces the EIR™ ‘Enclosed Installation Rigging’

system, which is a lightweight solution, designed to save

money on permanent installations. The Metrix Install Adapter

Plate is available when flying the Metrix Sub-t in the same

array with the Metrix-i or Metrix Wave -i enclosures. The EIR™

plates function in a similar manner as the AIR™ rigging

wheel. Each of the 6 positions are on a logarhitmic scale

(settings 0 to 5). Four screws fasten an EIR™ plate between

2 enclosures on each side. Adamson has also adapted the

EIR™ system as an option for the SpekTrix system.

MASS™ SystemMASS™ (Multi Angle Suspension

System) features several

different methods of flying M15

cabinets. MASS™ is designed

for a single or a pair of M15’s.

The M15 is designed to accept

a ‘multipurpose rigging plate’,

which is the base for the

following rigging methods: Pole

mount, Fly track, C-clamp, and

Single Axis & Dual Axis for a

single or a pair of M15’s. MASS™

is perfect for installations or

touring applications and is

available by special request.

Adamson Line Arrays offer the best possible solutions to

the complex questions of line array geometry. Sound

chambers, waveguides, driver size and box angle are

all critically optimized in the integration process of array

design. Each of these components plays a significant

role in the outcome.

Today Adamson offers various sizes of line arrays:

Large and Medium sized Y-Axis Series with the flyable

subwoofer extension T-21 Sub to the compact sized

SpekTrix Series – and the Ultra Compact Metrix Series.

LINE ARRAYS

Line Source technology

Co-Linear Drive Module Brock Adamson’s patented Co-Linear Drive Module,

is a Co-entrant Mid/High device, comprised of a high

frequency sound chamber, inside a mid frequency

sound chamber. The 9” Adamson midrange

compression driver fires into a concentric slotted phase

plug. The conversion of the concentric rings to vertical

slots in the midrange results in a flat wavefront.

The 4” high frequency compression driver mounts co-

axially to the back plate of the mid and fires energy

through the pole piece of the mid and into a separate

high frequency chamber. The high chamber offers

a series of cells that adjust both the path length and

the vector of the energy within the wavefront at the

exit. This reduces the curvature of the wavefront and

ensures that all acoustic particle movement within

the wavefront, is normal to the wavefront. This means

that in the resulting hyper-directional horn loaded mid/

high system, the wavefront structure of the individual

elements conforms closely to the shape of the overall

array wavefront. There is very little of the scattered

energy that causes vertical interference in other designs.

US Patent #6,343,133 and US Patent #6,581,719

The drive module has three slots at the exit. The centre

slot is energized with high frequency pressure and is

then flanked by two slots energized with mid frequency

pressure. With such close spacing and patented

processing techniques, the chamber virtually eliminates

time smear and mid lobing. US Patent #6,628,796.

Y-Axis Series

Photo by: Jimi Giannatti

Physical DataDimensions & Weight

Height (cm) 10.5” (26.7)

Width (cm) 42.75” (108.6)

Depth (cm) 16.5” (62.3)

Weight (Kg) 126lbs (57.2)

Dolly (Kg) 35lbs (15.9)

Attributes

Trapezoidal Enclosure

Rugged 5/8”, 11 Ply Baltic Birch Cabinet

Wood Finish: Textured Water Borne Acrylic

14 Gauge Cold Rolled Steel Grille

Metal Finish: Polyester Sandtex™ Powder

Accessories & Options

Black Compact / Standard / Large Aluminum

Rigging Frame, Waterproof Soft Covers,

Underhang Kit for Y18 & SpekTrix, Aluminum Dolly

Technical DataFrequency Response (+/-3dB)

Full Range Preset 60Hz - 18kHz

Frequency Range

Xover Preset 90Hz - 18kHz

Maximum SPL (Continuous / Peak)

Xover Preset 133.6dB / 139.6dB

Full Range Preset 133.8dB / 139.8dB

System Type

3 Way Active

Directivity & Connection Type

Vert. x Hor. 5° x 100°@-6dB, 90°@-3dB

(Prolate-Spheroidal Sound

Chamber)

Neutrik Speakon™ NL8

Drivers (Nominal Impedance)

LF (x2) ND10-L 10” Kevlar

Neodymium2x16Ω(8Ω)

MF YX9 9” Kevlar Ferrite

(8Ω)

HF JBL2451 4” - 1.5” Exit

Neodymium Compression

Driver(8Ω)

Power Handling (AES / Program / Peak)

LF (x2) 300 / 600 / 1200

MF 350 / 700 / 1400

HF 150 / 300 / 600

Sensitivity (2.83V@1m)

LF 97.1dB

MF 102.1dB

HF 110.1dB

Processing

Presets XTA & LAKE & PLM

Y10The Y10 line source system is the compact, mid-sized,

member of the Y-Axis family. But don’t be fooled by its

discreet size. The Y10 packs a serious punch, as the heart

of the system is the Adamson mid/high Co-Linear Drive

Module, loaded with a single YX9 midrange compression

driver and a 4” diaphragm high frequency compression

driver. The mid/high section of the Y10 is flanked by

two Adamson low mass ND10-L, 10” Kevlar, Neodymium

drivers.

This versatile workhorse can be deployed as a powerful

main system, or a complement to the Y18, in down fill

applications. To ensure complete compatibility, the Y10

and Y18 use a universal rigging design. When the Y10

is flown as a down fill to the Y18, the combination is the

industry ’s only seamless mid/high transition. Both Y10 and

Y18 cabinets utilize Adamson’s Co-Linear sound chamber

and are identical from 250 Hz, to their highest operating

frequency.

Therefore the wavefront of an array combining both Y18

and Y10, is uninterrupted by gaps or awkward and bulky

rigging systems. They produce an astonishing, seamless

blanket of smooth mid/high frequency energy throughout

the defined coverage area.

Y18The first and most powerful line source system in the

Adamson family was introduced as an answer to the

growing demand for higher SPL over greater distances.

The system caters primarily to touring and festival work,

but can be found on installations that require extremely

high SPL.

This 3-way cabinet employs two Adamson mid/high Co-

Linear Drive Modules and like the Y10, the drive module

and trapezoidal cabinet design create a uniform, slightly

curved seamless wavefront of mid/high energy, while the

lows are enforced with two Adamson AW18, 18” Kevlar

drivers.

This LF design provides rock solid performance that no

other system can duplicate. And with the most efficient

midrange system in the industry, the Y-Axis offers headroom

that is unfathomable. When other arrays have reached

their limit and begin to break up, the Y18 is a brick wall

that just won’t shudder.

And then you turn on the T21…

Physical Data

Dimensions & Weight

Height (cm) 18.375” (46.7)

Width (cm) 57.75” (146.6)

Depth (cm) 26.5” (62.3)


Dolly (Kg) 35lbs (15.9)

Attributes

Trapezoidal Enclosure






Black Standard / Large Aluminum Rigging Frame

Waterproof Soft Covers, Underhang Kit for Y10 &

SpekTrix, Aluminum Dolly

Technical Data

Frequency Response (+/-3dB)

Full Range Preset 40Hz to 18kHz

Frequency Range

Xover Preset 70Hz to 18kHz



Full Range Preset 138dB / 144dB

System Type

3 Way Active


Vert.x Hor. 5° x 100°@-6dB, 90°@-3dB

(Prolate-Spheroidal Sound

Chamber)



LF (x2) AW18 18” Kevlar Ferrite

2x8Ω(4Ω)

MF (x2) YX9 9” Kevlar Ferrite

2x8Ω(4Ω)

HF (x2) JBL2451 1.5” Exit


Driver2x8Ω(4Ω)


LF (x2) 600 / 1200 / 2400

MF (x2) 350 / 700 / 1400

HF (x2) 150 / 300 / 600


LF 102.1dB

MF 108.1dB

HF 114.1dB

Processing


Symmetrical Drive™technology

Physical Data

Dimensions & Weight

Height (cm) 23” (58.42)

Width (cm) 57.63” (146.38)

Depth (cm) 38.31” (97.31)

Weight (Kg) 309lbs (140)

Attributes






Black Aluminum Heavy Duty Rigging Frame

AIR™ System Rigging Hardware, Custom

Waterproof Soft Cover

Technical Data

Frequency Response

-10dB Single Unit

36Hz - 193Hz

Frequency Range

With Y18 (Y10) Preset

30Hz - 70Hz (90Hz)


With Preset 140.5dB / 146.5dB

Connection Type



LF (x2) SD-21 - 21” Kevlar

Neodymium2x2Ω


(30 - 300Hz)

LF (x2) 1500 / 3000 / 6000


LF 113.7 dB / 25Hz - 100Hz

Processing


“Adamson Y10’s and Y18’s, in addition to the T21 Sub, create a

complete package. I feel like I’m a salesman for this PA, but I’m

really excited about it because of how good it is. The efficiency of

the T21 sub is unlike any other sub.”

Kenneth “Pooch” Van Druten, FOH Engineer: Linkin Park, KISS, Kid Rock

“When you get in path of the T-21 Subs, the difference is incredible.

I love them.”

Harley Zinker, FOH Engineer: Interpol, The Strokes

“I read the specs, then I used the box. The T21 sounds even better

than it looks on paper. This box is a must have for any rock show!”

James McCullagh, FOH Engineer: INXS, The Libertines

“The Y10 with T-21 is the best active four-way I have ever used.”

Scott Willsallen, Sound Designer and Consultant - Eurovision 2006, Asian Games 2006,

National Day Parade Singapore 2007, World Youth Day Sydney 2008.

T21 SubAdamson has re-set the bar with a new generation of low frequency

technology. The T21’s performance is almost impossible to believe

when you read the specifications, but when you turn it on you can

feel that there is something special happening. And it is unlike

anything that you have experienced in the past.

But there is no magic involved, just the advanced cabinet design

coupled with a pair of the most sophisticated low frequency

transducers available; Brock Adamson’s own, SD-21 (Symmetrical

Drive™), 6” dual coil, 3000 watt, Kevlar woofers. Unlike other dual

coil drives, the SD-21 has a balanced spider suspension, with

spiders at both ends of the coil assembly, resulting in extreme

stability under high excursions. The air movement generated by

the spiders helps to cool the coil while “fins” draw the heat away

from the coil, lowering operating temperature and improving power

compression.

With 15mm of linear xmax, 6000 watts of power and a cabinet

designed to manage extreme air movement, the T21 is a true

powerhouse. Engineers and designers around the world are raving about it.

SpekTrix Series

SpekTrix & SpekTrix WSpekTrix offers all the benefits of a true line source via

patented wave shaping sound chamber technology (US

Patent #6,581,719). Both the 5 degree SpekTrix and the

15 degree SpekTrix W (Wide Angle Vertical Enclosure) are

three-way enclosures exhibiting extremely high output for

their compact size.

The sound chamber in the heart of the SpekTrix is similar to

the inner (high frequency) body of the Y-Axis drive module.

It produces a slightly curved wave front in the HF that is

comparable to the wavefront found in the Y-Axis.

The 15 degree SpekTrix W allows for extreme downward

angles at the bottom of the array – ensuring optimal

coverage in the front rows – and is perfect for use in wide

vertical coverage array designs (for instance, in theatres

with multiple balconies). Both enclosures feature unique

8.5” Adamson Kevlar, neodymium drivers – one ND8-L

LF and one ND8-M MF - and one 3” diaphragm high

frequency compression driver.

The SpekTrix and SpekTrix W feature the patented AIR™

revolving disk flying hardware, while the SpekTrix rigging

frame is equipped with a

single threaded

moving pick point,

so the centre of

balance and tilt

angle can be precisely

adjusted with little effort.

Physical Data

Dimensions & Weight SpekTrix / SpekTrix W

Height (cm) 8.6” (22) / 10.4” (26.4)

Width (cm) 27.9” (71) / 27.9” (71)

Depth (cm) 18.9” (48) / 18.9” (48)

Weight (Kg) 62lbs (28) / 64lbs (29)

Attributes

Rugged 5/8”, 11Ply Baltic Birch Cabinet





Black Aluminum Rigging Frame with a single

movable pick point / dual pick points,

AIR™/ EIR™ Systems, Regular / Extended

Stacking Plates, Custom Flightcase, Aluminum

Dolly, Waterproof Soft Covers

Technical Data



With Sub 35Hz - 18kHz

Frequency Range




Full Range Preset 129.8dB / 135.8dB

System Type

3 Way Active


Vert. x Hor. SpekTrix 5° /

SpekTrix W 15° x 120°



LF ND8-L 8.5” Kevlar

Neodymium(8Ω)

MF ND8-M 8.5” Kevlar

Neodymium(8Ω)

HF B&C DE900 3” - 1.4”


Driver(8Ω)


LF 250 / 500 / 1000

MF 250 / 500 / 1000

HF 80 / 160 / 320


LF 92.6dB / 80Hz - 250Hz

MF 97.1dB / 250Hz - 900Hz

HF 110.1dB / 900Hz - 18kHz

Processing

Presets XTA & LAKE & PLMSpekTrix W

SpekTrix

Convertible Cardioid

SpekTrix SubThe compact companion Sub to the SpekTrix is the first

Adamson enclosure to introduce Convertible Cardioid

Technology. This dual Kevlar 18” manifold can be

arrayed conventionally (all facing the same way), or it

can be arrayed in back-to-front pairs for true cardioid

performance. For ease of cabling in cardioid mode,

there are four NL8 connectors; two on the front and two

on back of the cabinet.

The precision-machined, spring-loaded rigging hardware

works in conjunction with other AIR™ system rigging

elements, allowing a variety of configurations -attach

the subs to the rigging frame and hang the SpekTrix

underneath them, or stack your subs directly on the floor

and ground stack your array on top. The SpekTrix Sub

loads in pairs on an aluminum dolly board, with a soft

cover option.

Physical Data

Dimensions & Weight

Height (cm) 23” (58.5)

Width (cm) 28” (64)

Depth (cm) 32” (84)

Weight (Kg) 170 lbs (77)

Attributes

Internally Braced Rectangular Enclosure






Black Aluminum Rigging Frame with a single

movable pick point / dual pick points,

Spring Loaded AIR™System,

Aluminum Dolly, Waterproof Soft Covers

Technical Data


Full Range Preset 40Hz - 160Hz

Frequency Range

Xover Preset 35Hz - 110Hz


132dB / 138dB


Convertible Cardioid


2 Front & 2 Rear Connectors



2x8Ω(4Ω)


LF (x2) 600 / 1200 / 2400


LF 103.9dB

Processing


Metrix Series

Metrix & Metrix W

Our Multi-Purpose,

Ultra Compact Line

Source Series was

designed for small to

medium permanent

installations, or for

use as a main system in corporate and smaller touring

applications. The rugged but discreet cabinet is also a

handy solution for large format touring as a front fill, lip fill or

out fill system.

The 2-way design shares the same patented sound chamber

technology found in the SpekTrix series.

Unlike other ultra compact systems, the Metrix does not run

out of steam when you put it to the test. The sound chamber

is loaded with a 3” diaphragm HF compression driver giving

it the raw horsepower that is simply unavailable in other

cabinets of its class. Metrix ‘Symmetrical Adapter Plates’

are used to fly L and R arrays with mirrored waveguides for

perfect symmetry. The HF sound chamber is paired with a

high powered single Neodymium, Kevlar 8.5” low/mid driver.

The Metrix toolbox also includes ‘Pole

Mount Plates’, designed to handle

a pair of Metrix W (Wide Angle

Vertical Enclosure) mounted on

the built-in pole mount socket

in the Metrix Sub. The unique

accessories make the Metrix

series a scalable solution, even

for smaller events where a full array

is not needed.

Metrix W-t

Metrix-t

Photo by: Fabrice Lachaze

Metrix SubThis convertible cardioid Sub features two unique 15”

Kevlar Neodymium drivers, which take full advantage

of Adamson’s Advanced Cone Architecture™. This

proprietary and long overdue advancement in

cone geometries creates a stiffer cone rim, while it

simultaneously eliminates radial modes in the driver ’s

passband. The reduction in distortion and breakup is

extraordinary.

The driver ’s unique design,

loaded in a manifold

with optimal

port tuning,

maximizes

the output

capability of this

very compact

enclosure.

A Metrix ‘Frame Link

Adapter ’ can be used

for flying subs behind the

main array when working

with limited trim heights.

Metrix Sub-t Physical DataDimensions & Weight Metrix / Metrix W / Metrix Sub

Height Front (cm) 8.56” (21.7) / 10.31” (26.2) / 24.4” (62)

Width (cm) 21.25” (54) / 21.25” (54) / 21.25” (54)

Depth (cm) 16.5” (42) / 16.5” (42) / 28.875” (73.3)

Weight (Kg) t - 53.5lbs (24.2) / 55.5lbs (25.1) / 129.5lbs (58.7)

i - 43.5lbs (19.7) / 45.5lbs (20.6) / 117.5lbs (53.2)

Attributes

Trapezoidal / Rectangular (Metrix Sub) Enclosure






Black Aluminum Rigging Frame (-t), Black Steel Rigging

Frame (-i), AIR™ / EIR™ Systems, Frame Link Adapter Plates,

Install Adapter Plates, Extended / Standard Stacking Plates,

Symmetrical Adapter-t, Short & Tall Polemount-t, Custom Flight

Case for -t Series, Wooden Dollies & Soft Covers for the Sub.

Technical DataFrequency Response (+/-3dB)

Full Range Preset 95Hz - 18kHz (Metrix & Metrix W, no Sub)

40Hz - 160 Hz (Sub Only)

35Hz - 18kHz (Complete System)

Frequency Range

Xover Preset 101Hz - 18kHz (Metrix & Metrix W)

35Hz - 111Hz (Sub)


Xover Preset (101Hz)

126.5dB / 132.5dB (Metrix)

126.8dB / 132.8dB (Metrix W)

130.4dB / 136.4dB (Metrix Sub)

System Type

2 Way Active / 3 Way Active with Sub


Vert. x Hor. Metrix 5° / Metrix W 15° x 120°

Neutrik Speakon™ NL8 (Metrix Sub - 2 front, 2 back)


(Metrix / Metrix W)

LMF ND8-LM8.5”KevlarNeodymiumLow/Mid(16Ω)

HF B&CDE8003”-1.4”ExitNeodymiumCompressionDriver(16Ω)

(Metrix Sub)

LF(x2) ND15-S15”KevlarNeodymium2x6Ω(3Ω)


LMF 250 / 500 / 1000 (Metrix & Metrix W)

HF 110 / 220 / 440 (Metrix & Metrix W)

LF (x2) 500 /1000 / 2000 (Metrix Sub)


L/MF 96.1dB (Metrix & Metrix W)

HF 108.1dB (Metrix & Metrix W)

LF 102.6dB (Metrix Sub)

Processing

Presets XTA & LAKE & PLM & Adamson MSeries

3 Phases

The project was conceived after years of analyzing

the inefficiencies found in Sound Re-enforcement and

Performance Venue Optimization.

In any given concert environment, you don’t have to look

far before you find multiple software programs, running

on a slew of laptops, awkward packaging, slow rigging

systems, excessive truck space consumed by bulky amp

racks and oversized loudspeaker systems.

This is how we came to a very simple conclusion...

integrate & consolidate.

The key components of Energia, include a series of new

loudspeaker systems, with networkable Class D amplifier

modules, DSP, cable and power distribution, AVB

network hardware with software integration of control, 3

dimensional simulation and diagnostics. To ensure the

reliability and a smooth integration of the technology,

there are 3 phases involved in the release of the first

loudspeaker system in Project Energia.

Project Energia

MORE THAN A SIMPLE 3dB

Phase 1 - Mechanical Field Testing

Blueprint® Software: Design Tools

Phase 2 - Class D Amplifier, Power Distribution and

Ground Control Field Testing

Phase 3 - Network and Network Hardware Field Testing

Built-in controller & analyser with AVB Interactivity (Energia

Genus) Blueprint® Suite: Control & Design Software

The Final Product

The elegant build of each Adamson E15 cabinet begins

with the provocative e-Capsule, precisely engineered

and constructed, in lightweight Aluminum and Aircraft

Steel.

The patent pending e-Capsule is the heart of the E15

system, housing mid/high components, waveguides,

amplification, network electronics and the Autolock™

rigging system which allows for 8 incremental positions

and can handle 32 cabinets deep with an 8:1 safety

factor. A single cable energizes the E15 with analog and

digital signals, network control and 3-phase AC power.

The E15 requires one cable for four enclosures.

The E15’s waveguide pattern provides 90 degrees of

horizontal coverage (+/- 3dB), while vertical coverage is

determined by the quantity of 6-degree cabinets utilized

in any given array. Once the e-Capsule is then flanked

with two single 15” Baltic birch trapezoidal e-Enclosures.

The Birch enclosures provide the acoustical integrity and

natural warmth of a wooden cabinet, but since they are

simply bolted onto the side of the e-Capsule, there is no

influence over the rigging alignment.

The Blueprint® Software Suite provides adaptive

feedback and equalization, optimizing performance

from venue to venue. Blueprint simulates, controls

and monitors your system, providing the fastest setups

with educated feedback, allowing engineers to make

informed decisions in tough situations that are faced

day in and day out on the road.

On Stage

Photo by: Oliver Santos

MONITORS

M Series

The Adamson M Series offers users a range of high

powered stage monitors for a variety of demanding

applications.

The M12 is the most compact, while the M15 has proven

to be a success as a lightweight, high horsepower

monitor. Since its inception the M15 has found itself on

an ever-growing number of technical riders worldwide.

Both M15 and M12 can be ordered complete with an

Active/Passive switchable crossover network, or in an

active only version.

The newest addition to the family, the M212 delivers all

the characteristics of the Adamson M12 monitor but

with the added benefit of low frequency extension,

making the M212 the perfect solution where you require

extended low end punch while maintaining the vocal

clarity of a 12” wedge.

The biggest and meanest member of the family is

the extremely powerful M215. With all the fine sonic

qualities of the M15, the M215 utilizes two 15” drivers

rather than one, and takes advantage of the larger

cavity volume to produce massive low end. The M215

is ideal for artists that insist on having big monitor rigs

with substantial output. The impressive bass response

also allows the M215 to act as a standalone drumfill.

M12The incredibly lightweight Adamson M12 monitor delivers

everything you need in a low profile stage monitor:

fantastic gain before feedback, precise pattern control

and high output with extremely low distortion.

Together, the symmetrical trapezoid design and the 65°

conical waveguide, allow any two cabinets to operate as

a mirrored pair.

The M12 exhibits remarkably low distortion thanks to the

qualities of its advanced multilayer Kevlar cone driver and

Adamson’s proprietary Advanced Cone Architecture™.

Adamson’s first lightweight, 12” Kevlar Neodymium driver

supplies exceptional power handling with outstanding

mid frequency response, ideal for demanding vocal

performance.

Physical Data

Dimensions & Weight

Height (cm) 13.5” (34.3)

Width (cm) 25.1” (63.8)

Depth (cm) 15.8” (40.1)

Weight (Kg) 42.5lbs (19.3)

Attributes

Symmetrical Trapezoid Enclosure

Rugged 5/8”, 11 ply Baltic Birch Cabinet




Fiberglass Acoustic Waveguide

2 Crossover versions: the Switchable Active /

Passive (s), and the Active Only (a)


Custom Flightcase for a pair of M12 cabinets

Technical Data



Frequency Range


Maximum SPL (Continuous)

Xover Preset 132.3dB (Active)

Monitor Preset 131.1dB (Active)

System Type

Active/Passive

Switchable


Vert. x Hor. 65° x 65°



LF ND12 12” Kevlar

Neodymium(6Ω)

HF B&C DE920TN 3” - 1.4” Exit


Driver(8Ω)


LF 500 / 1000 / 2000

HF 110 / 220 / 440


LF 98.2dB

HF 108.1dB

Processing

Presets XTA & LAKE & Adamson

MSeries

M15Loaded with our ND15-L driver and a 4” diaphragm

compression driver, this wedge produces extremely

high SPL. The M15 is a first-class tool for demanding

applications.

Featuring an extremely low profile, symmetrical trapezoid

design with a 50° conical waveguide, the M15 allows any

two cabinets to work together in a mirror image monitor

configuration.

The breakthrough in our Advanced Cone Architecture™

makes our ND15 driver the only 15” drivers with zero axial

modes in its entire pass band. This dramatically increases

the linearized mid-range response, while maintaining a

rock solid bottom end, something that is impossible to

achieve with a 15” paper driver. The M15 has unsurpassed

output and less distortion than any monitor in its class.


Height (cm) 14” (35.6)

Width (cm) 28.5” (72.4)

Depth (cm) 16.9” (42.9)


Attributes


Rugged 5/8” 11ply Baltic Birch Cabinet






MASS™ Rigging System, Custom Flightcase for

a pair of M15 Cabinets

Technical Data



Frequency Range



Xover Preset 131.3dB


Monitor Preset 129.5dB (Passive)

System Type

Active/Passive Switchable





LF ND15-L 15” Kevlar

Neodymium(6Ω)

HF B&C DE1000 4” - 1.5” Exit


Driver(8Ω)


LF 500 / 1000 / 2000

HF 140 / 280 / 560


LF 98.9dB (60Hz - 800Hz)

HF 108.5dB (800Hz - 18kHz)

Processing


MSeries

M212The low-profile M212 consists of two multi-layer Kevlar

12” cones that provide exceptional power handling

with remarkably low distortion and phenomenal mid

frequency response, ideal for the most demanding vocal

performances. Again, Adamson’s Advanced Cone

Architecture ensures that cone modes in the passband

are eliminated.

The 65° conical waveguide design ensures that there is

minimal turbulence with exceptionally low distortion.


Height (cm) 15.8” (40.1)

Width (cm) 24.8” (63)

Depth (cm) 23” (58.4)


Attributes


Rugged 5/8” 11ply Baltic Birch Cabinet






MASS™ Rigging System, Custom Flightcase for

a pair of M15 Cabinets

Technical Data



Frequency Range



Xover Preset 138.3dB (Active)


System Type

Active





LF ND12-L 12” Kevlar

Neodymium2x6Ω(3Ω)

HF B&C DE920TN 3” - 1.4” Exit


Driver(8Ω)


LF 1000 / 2000 / 4000

HF 110 / 220 / 440


LF 104.2dB (60Hz - 800Hz)

HF 108.1dB (800Hz - 18kHz)

Processing


MSeries

Physical Data

Dimensions & Weight

Height (cm) 18.5” (47)

Width (cm) 32” (81.2)

Depth (cm) 23.8” (60.5)

Weight (Kg) 91.5lbs (41.6)

Attributes

Trapezoid Enclosure



14 Gauge Cold Steel Grille

Metal: Polyester Sandtex™ Powder



Custom Flightcase

Technical Data



Frequency Range



Monitor Preset 137.5dB

System Type

Active





LF (x2) ND15-L 15” Kevlar

Neodymium2x6Ω(3Ω)

HF B&C DE1000 4” - 1.5” Exit


Driver(8Ω)


LF (x2) 1000 / 2000 / 4000

HF 140 / 280 / 560


LF 104.9dB (45Hz - 800Hz)

HF 108.5dB (800Hz - 18kHz)

Processing


MSeries

M215Loaded with 2 of our ND15-L drivers and a 4” diaphragm

compression driver, the M215 is an ideal monitor for

drum fills, keyboard monitor applications and extremely

high output front line monitoring. Unlike other double

15” designs, the M215 also incorporates Adamson’s

Advanced Cone Architecture™ drastically improving the

vocal response while producing enough SPL to stop the

most demanding musicians in their tracks.

When it comes to conventional enclosures, Adamson

leads the way with innovative driver and wave-guide

designs, rigging and ergonomics. From our largest to

our smallest speaker enclosures, Adamson’s engineering

laboratories strive to provide the best possible solutions for

a variety of system applications.

Versatility through choice

CONVENTIONAL ENCLOSURES

The SX Series is a powerful and effective solution for

a main P.A. system, or as an additional side- or drum-

fill to complement a variety of touring or permanent

applications. Naturally, the SX18 and SX Sub are

loaded with our proprietary driver technology. The SX

Sub offers a tilt back wheel system while SX18’s are

fitted with a dolly board, making transport of either

cabinet a breeze.

Designers have the option to utilize the SX18 as a

single cabinet or an array of cabinets. The trapezoidal

SX18 enclosure comes standard with a switchable

passive network between the mids and highs, allowing

for two-way or three-way operation.

With one Adamson MSX 10” mid-range compression

driver, and one 3” diaphragm high frequency

compression driver mounted on an Adamson mid/

high waveguide, the SX18 provides smooth mid/high

coverage that we are renowned for. To add to its

versatility, the SX18 features one Adamson AW18 18”

LF transducer and can extend down to 45Hz for jazz

or lighter material.

If additional sub bass re-enforcement is required, the

companion SX Sub is a dual 18” front loaded cabinet

that provides a solid and punchy sub extension.

Whether you need a reliable system for your venue, or

rugged and sturdy enhancement to your existing rig,

the SX series offers a high output solution for a broad

range of applications.

SX Series

Physical Data

Dimensions & Weight SX18 / SX Sub

Height Front (cm) 42” (106.7) / 42” (106.7)

Width (cm) 20” (50.8) / 24.6” (62.5)

Depth (cm) 22” (56) / 24.5” (62.2)

Weight (Kg) 143lbs (65) / 135lbs (61.4)

Attributes





SX18 includes 5 Built-in Fly Points and Fitted Wooden

Dolly, Heavy Duty Built-in Urethane Wheels in the SX

Sub

Technical Data

Frequency Response (+/-3dB) SX18 / SX Sub

Full Range Preset 40Hz - 18kHz / 40Hz - 200Hz

Frequency Range

Xover Preset 80Hz - 18kHz / 35Hz - 80Hz


Xover Preset 133dB / 128.7dB

Full Range Preset 132dB / N/A

System Type

Passive 2 Way /

Active 3 Way Plus Sub


Hor. x Vert. 60° x 40°

Neutrik Speakon™ NL4 / NL8 (SX Sub)


LF AW1818”KevlarFerrite(8Ω)

MF MSXFerriteDriver(8Ω)

HF B&C DE82 3” - 1.4” Exit Ceramic

CompressionDriver(8Ω)


2x8Ω(4Ω)(SXSub)


LF 600 / 1200 / 2400

MF 150 / 300 / 600

HF 80 / 160 / 320

LF (x2) 600 / 1200 / 2400 (SX Sub)


LF 98.1dB

MF 111.1dB

HF 105.1dB

LF 101.8dB (SX Sub)

Processing

Presets XTA & LAKE

Physical Data

LX10 10MX CB

Dimensions & Weight

Height Front (cm) 23.46” (59.6) 13.25” (34.5) 18” (45.7)

Width (cm) 12.5” (31.8) 20.35” (53) 9.75” (24.8)

Depth (cm) 14.13” (35.9) 15” (39.1) 11” (27.9)

Weight (Kg) 47.3 lbs (21.5) 47.3lbs (21.5) 26lbs (11.7)

Attributes & Accessories


Wood Finish: Textured Water

Borne Acrylic 14 Gauge Cold Rolled Steel Grille


Tripod Socket Mount in the LX10, Internal

Crossover & Rotatable Horn (CB1)

Optional U-bracket Hardware - Horizontal or Vertical Yoke (CB1)

Custom Rigging Points (CB1)

Technical Data

LX10 10MX CB1


Full Range Preset 55Hz - 18kHz 55 Hz - 18 kHz 80Hz - 18kHz

Frequency Range

Xover Preset 125Hz - 18kHz 125Hz - 18kHz 100Hz - 18kHz


Xover Preset 122.15dB 122.5dB / 131.3dB 119.5dB

Full Range Preset 121dB 121dB / 130.3dB 118.8dB

Monitor Preset n/a 121.5dB / 130.2dB n/a

System Type

Passive Passive Passive


Vert. x Hor. 70° x 35° 70° x 35° 90° x 60°

(rotatable)

Neutrik Speakon™ NL4 NL4 NL4


LF AX1010”(8Ω) AX1010”(8Ω) ND8-B8.5”

KevlarNeod.Driver(8Ω)

HF B&C DE16 1” Exit B&C DE82 1.5” Exit B&C DE16 1” Exit

CompressionDriver(8Ω) CompressionDriver(8Ω) CompressionDriver(8Ω)


LF 300 / 600 / 1200 300 / 600 / 1200 250 / 500 / 1000

HF 60 / 120 / 240 40 / 80 / 160 30 / 60 / 90


LF 99.1dB 100.5dB 94.3dB

HF 105.1dB 104.5dB 109dB

Full Range n/a n/a 98.6dB

Processing

Presets XTA & LAKE

Compact enclosures

We offer a full line of contracting boxes with a unique

trim, grille and box geometry. Designed with the same hi

modulus materials and our world renowned neodymium,

Kevlar transducers, the Point Series is aimed to outperform

those in its class.

These sleek enclosures can be ordered in any Pantone

color with color matched SLR™ rigging options. The Point

series ranges from 8” enclosures to 15” enclosures with

powerful subs to complement the 2-way enclosures.

For more information refer to the Point series brochure or

view the Point series online at www.adamsonsystems.com

Point Series contractor boxes

INSTALLATION EXCLUSIVE

Adamson Systems Engineering Inc.

1401 Scugog Line 6

Port Perry, ON L9L 1B2

Canada

T: +1 905 982 0520

F: +1 905 982 0609

www.adamsonsystems.com

24/7

CONTACT

Headquarters Brock Adamson

President & CEO

Jesse Adamson

Director of Marketing and Sales

[email protected]

Benoit Cabot

Product Development & Applications

Specialist

[email protected]

Ewan McDonald

Technical Sales & Applications

Specialist

[email protected]

Adamson Europe GmbHJochen Sommer

Director of European Operations

[email protected]

David Dohrmann

Applications Specialist

[email protected]

Sven Böhnke

Sales Manager Germany

[email protected]

Adamson Europe GmbH

Billstraße 173

20539 Hamburg

Germany

T: +49 40 7699 9959 0

F: +49 40 7699 9959 9

Copyright © 2011 Adamson Systems Engineering Inc.

ADAMSONSYSTEMS.COM

Documents

Adamson Full Line Catalogue