View
214
Download
1
Embed Size (px)
Citation preview
One-stop-shop
Global sourcing service for UK equipment operators
Pump users in the UK can take
advantage of a new service
launched by BS Services, which
aims to find replacement pumps
and spare parts for process
machinery, regardless of where in
the world the equipment was
originally manufactured.
Mixers, dispensers and fluid
handling equipment that has been
imported into the UK often
include air-operated diaphragm,
rotary, or gear pumps. Operators
commonly find locating spare parts
for such equipment time con-
suming and expensive. Pump
identification details are some-
times removed or erased in order to
restrict customer supply options.
Often the user is charged inflated
prices for replacement parts, whilst
response times and delivery can be
poor. Fitting an alternative pump
is always an option but in many
cases there would also be the
expense of modifying the pneu-
matic control system and pipe
work to ensure that operating
performance was maintained.
BS Services new ‘one-stop-shop’
service is designed to assist equip-
ment operators who find them-
selves in such circumstances.
Using their international pump
trade contacts the company claim
they can source identical replace-
ment pumps or spares direct from
the original pump manufacturer,
and in doing so offer the equip-
ment user substantial cost savings
compared to an importing agent.
CONTACT
BS Services, 19 Harcourt Road, Tring, Hertfordshire, HP23 5J. UK. Tel: +44 (0)1442 828 050 Fax: +44 (0)1442 828 646. Email: barry.bsservicesQbtclick.com
ABS introduces compact next generation pump*
ABS Pumps has updated three of its models.
ABS has introduced the next
generation of MF 354-804,
MF 565-665, and Piranha
08 pumps. The new models
all share a new compact
design, which means a smaller
sump requirement and shor-
ter installation time. The
design incorporates a cast iron
(GG25), motor housing and
volute, oil chamber, stainless
steel upper lid, silicon car-
bide mechanical seal and
polyamide impeller.
The MF series is designed for
the de-watering of buildings
and construction sites, and also
for pumping effluent from
locations below the backwash
level. In addition, therefore,
the pumps are suitable for
emptying containers of any
type, for use in septic tanks, the
emptying of flooded cellars, the
pumping of rainwater and
drainage applications. When
intended for use on building
sites selected models are
available as a VO-version, with
screen and hose connections.
The Piranha 08 has the
same new design features as
the MF series but it in-
corporates the Piranha cutting
system from ABS. The model
is therefore best suited for
the pumping of domestic
sewage.
CONTACT
A65 Pumps Part of Cardo Pump AB, Krokslltts Parkgata 4, Box 2056, SE-431 02, MBlndal, Sweden. Tel: +46 31 83 6300 Fax: +46 31 16 8542 E-mail: [email protected] www.abspumps.com