About CAD. Serve s.r.o. company Kdo je CAD · Steel profiles – Libraries of profiles, ... Paragon - Piping, Hangers&Supports, Cable Trays, ... PDMS AVEVA Everything3D AVEVA Bocad

Kdo je CAD.serve

About CAD. Serve s.r.o. company

ServicesOur design services are a one-stop shop solution.

At our offices, the project documentation shall be prepared by our qualifired staff precisely according to your requirements in 3D model and/or 2D documents.

We perform all planning phases from Basic Engineering to As-built State.We use the AVEVA and Autodesk programs.

We are a design company with a tradition spanning more than ten years.

Using state-of-the-art software, we create 3D models of technological units for customers in the Czech Republic, Germany, Austria and Switzerland.

We consider high quality of delivered work, correct conduct, reliability as a matter of course.

About us

In 2015, our company became a certified HR agency in the territory of the Czech Republic and Germany.

Our services to date have thus expanded to include the ability to offer its experienced employees also in the form of leased personnel.

Advantages of agency employment

Agency employment is considered as employment which is far more flexiblethan classic employment.

For the employer, the significant advantage of agency employment is the possibility to operatively acquire employees in periods of higher production demand.

Use of agency employment services substantially cuts the costs of hiring labour and managing personnel and payroll services.

Employment Agency

We are a design company with a tradition spanning more than ten years.

Using state-of-the-art software, we create 3D models of technological units for customers in the Czech Republic, Germany, Austria and Switzerland.

We consider high quality of delivered work, correct conduct, reliability as a matter of course.

How we co-operate

This is followed by design of solutions with individual

steps and a time and financial estimate based on this.

At the beginning of ourco-operation, it is necessary to set and define objectives.

Long-term follow-up care, which also includes information

about potential updates, is a matter of course.

During implementation, the customer can monitor

the current status of the project at regular meetings,

through data provided also via a web-interface with mobile

device output options.

Solution concept

Contract specification Implementation

Support

1

2 4

3

Benefits of co-operating with us

We are creative and innovative

We are experiencedand trusted by customers

Our team is stable

Power engineering

Mechanical engineering

Chemical industry

Petrochemistry

Pharmaceutical industry

Paper industry

Civil engineering

And others...

Our specialisations

WE SHALL TUNE-UP YOUR PROJECTTO PERFECTION

www.cadserve.cz

Our many years’ experience in the field is evidenced by the contracts that we have realised in the past or which we are currently handling.

Majority of our clients from the Czech Republic and abroad keep coming back to us with further projects.

Do you need to create a complex project for new or existing technology with intelligent inter-link of all data? We are here for you!

Customized services

CAD. Serve s.r.o., offers custom services as a one-stop shop solution.Our company offers many years of experience and comprehensive approach

to all assigned project.

If you are seeking value for money and professional services, were are here for you!

Creation of catalogues – catalogues according to customer’s requirements

Creation of upgrades – for above – standard extent of AVEVA Plant products

Training – internal training in all the current versions of the AVEVA Plant environment

Project Administration – professional project management in the AVEVA Plant environment

Testing of new versions – new AVEVA Plant products

Follow-up care – cooperation with the customer by devoloping new upgrade versions

Visualisation – the final visualisation of the project for presentation

Consulting – high-quality consulting when launching and expanding the AVEVA Plant environment

Our tailor-made solutions

Creation of catalogues

We process catalogues according to customer’s requirements or according to the product assortment

of a given manufacturer for effective design in the AVEVA Plant environment.

Pipeline components – Libraries of pipeline elements according to EN, ASME standards

Cable trays – Libraries of building elements for cable trays

References

Customer Order description

Piping class catalogue based on ČSN standards using GPARTS

Number of processed items

DOOSAN ŠKODA POWER s.r.o. 495 CATE, 6634 SCOM,

17 SPEC, 10273 GPARTS

Piping class catalogue using GPARTS based on client's range of products

Georg Fischer Piping Systems Ltd.

710 CATE, 12158 SCOM,

16 SPEC, 18340 GPARTS

Catalogue based on customer's range of productsMPOWER Engineering a.s. 474 CATE, 3944 SCOM, 2 SPEC

Development and creation of a special catalogue and piping class for buried concrete conduit simulation

Chemieanlagenbau Chemnitz GmbH

1 SPEC, 12 CATE, 43 GPARTS

…and more

References


Catalogue and specification of cable trays including suspension based on the range of products marketed by KOPOS

DOOSAN ŠKODA POWER s.r.o.

…and more


42 CATE, 2 SPEC, 167 SCOM

Catalogue and specification of cable trays based on the range of products marketed by OBO BETTERMANN


3 SPEC, 35 CATE, 130 GPARTS

Hangers and supports – Libraries of the pipeline supports, cable trays, or HVAC

References


…and more


Completion and updating of the catalogue of piping suspension products

Bernecker Rohrbefestigungstechnik GmbH

5 CATE, 5 SCOM

Steel profiles – Libraries of profiles, fittings, joining segments (reinforcements, sheet metal, etc.)

Equipment – Libraries of pumps, tanks, etc.

References


…and more


References


Creation and parametrisation of templatesDIEFFENBACHER GMBH Maschinen- und Anlagenbau

…and more


TMPL, 1 SPEC

The hot-rolled H and cut T sections (China-Norm)BASF SE 4 STCA, 185 SCOM

Catalogue and specification for piping suspension systems including secondary steel

BASF SE 116 CATE, STCA, 766 JOIN, 93 FRMW, 6 TMPL

The GB and YB sections (China-Norm)BASF SE 6 STCA, 98 SCOM

Creation of upgrades

We offer creation of upgrades to extend the standard range of AVEVA Plant products.

Regardless of whether this concerns the automation of simple tasks, which make work easier and faster for users, or comprehensive solutions including automatic creation of data outputs,

the primary requirement is always simplicity and precise needs are always a priority.

Banners, toolbars, menu

– dimensioning, legends, interrelationships– tasks related to the creation or modification of 3D elements

Information upgrades – overviews of a gradient of pipeline paths, including direct link to the 3D window– overviews of the consistency of data of pipeline paths, including direct link to the 3D window– overviews of the collisions of selected groups of elements, including direct link to the 3D window

Complex upgrades

– automatic creation of secondary steel– automatic generation of the isometry of pipelines– automatic generation of drawings of the devices, steel structures, etc.

References


AVEVA PlantFormation of secondary steel, including batch generation of drawings and bills of materials

BASF SE

AVEVA PlantAutomatic generation of drawings and bills of materialsEnvironment of batch export of drawings to DGN-/DWG-format

Envi Con & Plant Engineering GmbH

AVEVA PlantAutomatic generation of drawings and bills of materialsEnvironment of batch export of drawings to DWG-format

MAN Diesel & Turbo SE

AVEVA PlantObjects to facilitate the formation of tray layingObjects to facilitate creation of steel structuresEnvironment of batch export of drawings to DGN-/DWG-formatObjects to facilitate the development of drawings

Siemens AG, Energy Management

AVEVA PlantComprehensive environment for the creation of steps, ladders and platformsTool for batch check for collisions, including output documentationTool for batch check of geometrical consistency of piping including output documentationBatch generation of piping drawings and bills of materialsEnvironment of batch export of drawings to DWG-formatObjects to facilitate the development of drawings


AVEVA PlantBatch generation of drawingsEnvironment of batch export of drawings to DWG-formatObjects to facilitate the development of drawings

DIEFFENBACHER GMBH Maschinen- und Anlagenbau

AVEVA PlantTool for batch check for collisions, including output documentationTool for batch check of geometrical consistency of piping including output documentationTool for batch check of piping height gradient including output documentationBatch generation of piping drawings and bills of materialsEnvironment of batch export of drawings to DWG-formatObjects to facilitate the development of drawings


AVEVA PlantBatch generation of piping drawings and bills of materialsEnvironment of batch export of drawings to DWG-formatObjects to facilitate the development of drawings

M+W Central Europe GmbH

…and more

Training

CAD. Serve s.r.o. offers a number of internal trainings focused mainly on the AVEVA Plant PDMS/E3D environment.

The scope of a training is always adapted to the specific needs of the client.The majority of the modules are taught based on practical experience at the Basic and Detail levels.

What we teach

Admin

Design

Draft

Isodraft

Paragon - Piping, Hangers&Supports, Cable Trays, HVAC, Steel, EQUI-TMPL

Lexicon, Propcon - training in the creation of environmental support elements

References


AVEVA PlantComplete training of the DRAFT module (drawings) including administration


AVEVA PlantUser training of the DRAFT module (drawings)


AVEVA PlantComplete training of the DRAFT module (drawings) including administrationUser training of the PARAGON/SPECON module (catalogue parts creation, including piping classes)


…and more

Project administration

For both new and existing customers, we provide professional project management in the AVEVA Plant environment.

Based on our many years' experience, emphasis is put on cooperation with the customer, making the process as well as the result of the project more effective.

References


AVEVA PlantEnvironment adjustment for the modules:3D-Model (DESIGN)Development of drawings (DRAFT)Creation of piping isometries (ISODRAFT)Libraries of the components (CATA-SPEC)


AVEVA PlantEnvironment adjustment for the modules:3D-Model (DESIGN)Development of drawings (DRAFT)

MAN Diesel & Turbo SE

AVEVA PlantEnvironment adjustment for the modules:3D-Model (DESIGN)Development of drawings (DRAFT)Libraries of the components (CATA-SPEC)

BASF SE

AVEVA PlantEnvironment adjustment for the modules:3D-Model (DESIGN)Development of drawings (DRAFT)Libraries of the components (CATA-SPEC)

Siemens AG, Energy Management




Chemieanlagenbau Chemnitz GmbH)

AVEVA PlantEnvironment adjustment for the modules:Development of drawings (DRAFT)Libraries of the components (CATA-SPEC)

DIEFFENBACHER GMBH Maschinen- und Anlagenbau

AVEVA PlantEnvironment adjustment for the modules:Development of drawings (DRAFT)Libraries of the components (CATA-SPEC)


…and more

New statuses

New statuses

The CAD. Serve company provides the creation of new project units and their parts on the basis of own experience and data provided by the client.

Cooperation and exchange of data between our company and subcontractors is a matter of course.

All these data are subsequently processed and based on customer requirements generated in the for of data, drawings or 3D documentation. An integral part of planning is regular monitoringof the consistency of data, collisions or other parameters. Thanks to these checks and experienced

supervision of one of our employees, the smooth flow of the project is substantially influenced.Simultaneously, all our clients can monitor the processing of job orders on-line via the web portal

or in the form of regular 3D and 2D outputs.

The costs are always transparent and foreseeable.

Collaboration proces

AVEVA

Electrical

AVEVA

PDMSAVEVA

Everything3D

AVEVA

BocadAVEVA

EngineeringAVEVA

Diagrams

AVEVA

NETAVEVA

InstrumentationAVEVA

Global

AUTODESK

NavisworksAUTODESK

AutoCAD

AVEVAE3D Insight

Data documentation

Drawings

3D drawings

Output data2Processing1

3D

CAD. Serve s.r.o., offers processing of new design units and its parts into 2D and/or 3D models in the AVEVA Plant environment, in the Basic Design

and Detail Design variants based on your request.

References


Design in 3D / Development of drawings, Creation of piping isometries

Type of orderBD = Basic DesignDD = Detail Design

M+W Central Europe GmbH DD


Sanofi-Aventis Deutschland GmbH

DD

Official project name

3RAD (Novartis Pfarma AG)

XPR0038


Spitzer GesmbH DD


Technisches Büro Hödl GmbH DD


Technisches Büro Schatz GmbH DD


Bilfinger Piping Technologies GmbH

DD GuD Bonn



DD STKW Westfalen



DD STKW Eemshaven



DD Al Qurayyat Power Plant



DD KW Moorburg

Design in 3D / Development of drawings, ICT-Systems GmbH DD SCA


M+W Central Europe GmbH DD NCSS New Facility (Beiersdorf AG), 2/3 Phase


M+W Central Europe GmbH DD PGFAM2 (Procter & Gamble)


M+W Central Europe GmbH DD Biologics VI (ROCHE)


M+W Central Europe GmbH DD Emery

Without official name



…and more



Type of orderBD = Basic DesignDD = Detail Design





IPME (ROCHE)

Phase E.Coli (ROCHE)


M+W Central Europe GmbH DD DOC2P (ROCHE)


M+W Central Europe GmbH DD DOC (ROCHE)


M+W Central Europe GmbH BD CEREX (ROCHE)


M+W Central Europe GmbH BD GOD (ROCHE)


M+W Central Europe GmbH DD TP-Expand (ROCHE)


M+W Central Europe GmbH DD Fiocruz

Drawing modification by isometry in AutoCADDOOSAN Škoda Power s.r.o. DD Lichtrefelde

Piping conversion into ASME standardsDOOSAN Škoda Power s.r.o. DD Tula

Conversion of cable routes into a 3D modelDOOSAN Škoda Power s.r.o. DD Vartan

Piping system conversion to EN standardsDOOSAN Škoda Power s.r.o. DD Dublin

Piping system conversion to EN standards, height gradient, consistency check

DOOSAN Škoda Power s.r.o. DD Karabatan

Piping system conversion to EN standards, height gradient, consistency check

DOOSAN Škoda Power s.r.o. DD Martinique

Development of drawingsDOOSAN Škoda Power s.r.o. DD Zabrze

Modification of existing routes, creation of auxiliary structures, including process/assembly documentation and BOM

DOOSAN Škoda Power s.r.o. DD Salalah

Creation of auxiliary structures, including process/assembly documentation and BOM

DOOSAN Škoda Power s.r.o. DD Templeborough

Creation of auxiliary structures, including process/assembly documentation and BOM

DOOSAN Škoda Power s.r.o. DD Martinique

Output data

3D documentation

Data processing into a 3D model. This serves for visual presentation, helping us verify materials, various structural links, their proportions, etc.

The output data are provided in dabacon, step, nvd, dwg or rvm formats.

Drawing documentation

Folder containing newly created two-dimensional layouts and drawings completed with a textual part, representing an updated description of the material object. The drawings are normally provided in the form of a digital file. Paper drawings

or hardcopy documents may also be supplied on request.

The output data are provided in pdf, dgn, dwg, dxf or svg formats.

Data documentation

Collection of data such as material listings, lists of piping, valve lists, manuals or databases.

The output data are provided in pdf, xls, doc, jpg and/or txt formats.

As build

As build

The CAD. Serve company offers processing of supplied documentation (point clouds and drawings) of current statuses of engineering plants and their parts with subsequent transfer

to the AVEVA Plant environment.

The output of such processing is the data, drawings or 3D documentation accordingto the customer’s requirements for a given application.

We are capable of ensuring the performance of all the three planning stages, including the actual initial scanning of existing statuses. At the same time, we offer all our clients the option to monitor the entire process on-line via the web portal or

in the form of regular 3D and 2D outputs.

We provide value for the money professional services and thus contribute to the timely completion of your project!

Collaboration proces

AVEVA

Electrical

AVEVA

PDMSAVEVA

Everything3D

AVEVA

BocadAVEVA

EngineeringAVEVA

Diagrams

AVEVA

NETAVEVA

InstrumentationAVEVA

Global

AUTODESK

NavisworksAUTODESK

AutoCAD

AVEVAE3D Insight

Data documentation

Drawings

3D drawings

Output data3Processing2

3D

3D laser scanningPoint cloud created by reflection

of the laser beam from a current surfaces

Existing documentation3D drawings, 2D drawings,

Data documentation

Input data1

Our company will process your documentation of a technological unit at its current status and convert it to the AVEVA Plant environment

in an output data format meeting your requirements.

References


Conversion of point clouds (actual status) to a 3D model

Type of orderAB = As Build

Sanofi-Aventis Deutschland GmbH

AB

Conversion of the actual status to a 3D modelBilfinger Piping Technologies GmbH

AB


CAPI

GuD Bonn

Conversion of the actual status to a 3D modelICT-Systems GmbH AB SCA

Conversion of the actual status to a 3D model / Development of drawings / Design of pining isometries

DOOSAN Škoda Power s.r.o. AB Tychy

Conversion of the actual status to a 3D model /Development of drawings / Design of pining isometries

DOOSAN Škoda Power s.r.o. AB Vartan

…and more

Input data

3D laser scanning

Rapid collection of detailed and precise data of the actual design. The 3D laser scanner emits a laser beam and records to 1,000,000 points per second in circular profiles in the surrounding area.

Each point is assigned its XYZ coordinates and reflectance and the true colour of the object being scanned.The data are used to create a 3D model.

Existing documentation

Folder of two-dimensional layouts and drawings completed with a textual part, representing current description of the material object. The purpose of compiling the design documentation

is to precisely record in an unambiguous manner all geometrical parameters of the object or its components.

Output data

3D documentation

Data processing into a 3D model. This serves for visual presentation, helping us verify materials, various structural links, their proportions, etc.

The output data are provided in dabacon, step, nvd, dwg or rvm formats.

Drawing documentation

Folder containing newly created two-dimensional layouts and drawings completed with a textual part, representing an updated description of the material object.

The drawings are normally provided in the form of a digital file. Paper drawings or hardcopy documents may also be supplied on request.

The output data are provided in pdf, dgn, dwg, dxf or svg formats.

Data documentation

Collection of data such as material listings, lists of piping, valve lists, manuals or databases.

The output data are provided in pdf, xls, doc, jpg and/or txt formats.

CAD. Serve s.r.o. Edvarda Beneše 31, 301 00 Pilsen CZ

+420 377 220 104 +420 377 220 084

[email protected] www.cadserve.cz

Ĺ

Documents

About CAD. Serve s.r.o. company Kdo je CAD · Steel profiles – Libraries of profiles, ... Paragon - Piping, Hangers&Supports, Cable Trays, ... PDMS AVEVA Everything3D AVEVA Bocad