ABC Motorized Ball Valve InstructionsABC motorized ball valves powered open by line voltage and motor-driven closed by a built in capacitor, when power is removed from the valves.

Plumbing Installation

• Formaximumweatherprotection,thevalveshould be mounted in a horizontal pipe run with actuator above the ball valve.

• ABCvalvescanhavetheflowpassthrough in either direction.

• Astrainerupstreamisrecommendedifinstallation will have high particulate to prevent damage.

• Isolationandbypassvalvesarealsorecommended for maintenance.

Wiring

• Valveswiththe100-240VACactuatorwill operate off of a line voltage within this range.

• Linevoltageoutsideoftheratedrangewilldamage actuator.

• Blackwireconnectstoneutralandredtohot.

• Whenlinevoltageisapplied,valvewillopen and when voltage is removed, it will close.

SpecificationsMax Temp. ............................................140oFPressure ........................................ 0-225PSIValve Body ..................ChromePlatedBrassBall & Stem..................ChromePlatedBrassSeals ....................................................EPDMShipping Weight ....................................3 lbsStandard Electrical ......................... 120VACSizes Available ....................1/4,1/2,3/4&1”Max Torque .............................................2NMMax Power ................................................5WCurrent ............................................ 25±5mACycle Time ..................................5-7secondsActuator Housing ..................................ABSRating ....................................................1P67Cycle Life.......................................... 80,000+

Manual Operations

The ball valves can be manually operated with power removed from valve.

Steps:

1. Unplugvalvefrompowersource.2. Liftthehandwheelandstarttoturn.If

there is a charge on the capacitor it will rotate valve until fully discharged.

3. Withcapacitordischarged,rotatetodesired position.

4. Lowerhandwheel.

Warning! Manual operations with power still connected to actuator will cause damage.

Position Indicator

Advantage Controls4700HaroldAbitzDr•Muskogee,OK74403

1-800-743-7431phone•1-888-686-6212faxwww.advantagecontrols.com

Indicating Window

Hand wheel

Positionindicatorwith valve closed.

ValveshownwithOptionJconduit

!