A GREEN BUILD AND DESIGN

CONSTRUCTION COMPANY

Princeps Construction Limited was incorporated under the Companies Act (Cap 486)

as a special purpose company to provide technical Architectural

consultancy services and support in the broad fields of Roads Construction, Building

Construction, Repairs and Maintenance of Roads & Buildings, Fabricated steel Bridges

construction and facilities management , Supplies among others.

Throughout our involvement, we will invest most attention to detail and provide knowledge

driven and cost saving solutions for the most complex construction assignments.

Our core business is therefore largely Roads construction, Roads repair and

maintenance, building construction/repairs and commissioning and maintenance of

electro mechanical equipment with special emphasis in air conditioners, refrigeration

equipment, water supply equipment, petrol station equipment, domestic and industrial

wiring, and generator

Strategy, Mission and Vision

Strategy

Our Strategy dwells on achieving the company’s financial and operative targets through:

Concentrating on our core business being an integrated Building construction

company.

Providing a total project leadership by leveraging our key construction competences to

effect the best fit solution for our customers.

Recruiting, nurturing and developing our employees as a key pillar of our

competences.

Moving forward in search of consistent growth, improved productivity and innovation.

Mission

Our Mission is to safely and profitably serve our clients’ construction needs while

adhering to our inherent drive for quality, integrity and employee satisfaction. Vision

To be the leading Engineering Consultancy firm of choice in Kenya and the greater

East African region

Our Vision is grounded on commitment to being a contractor who is known

nationally and internationally for quality, integrity and resourcefulness, and internally

for profitability and employee satisfaction.

Equipments

Excavator Backhoe loader

Bulldozer

Concrete Mixer

Tippers Tipper

Crawler Crane

List of Key Personnel

DESIGNATION NAME NATION

ALITY

QUALIFICATION

CO-DIRECTOR

BENJAMIN

KILONZI MUE

KENYAN

B.Sc Construction

Management

CO-DIRECTOR

SOLOMON

MUNYANGE

MUTUA

KENYAN

BS c Environmental

Planning and Management

ARCHITECT ALEX MUSYIMI

KILONZI

KENYAN BSc

Architecture/Archite

ctural Studies

Company Capabilities

The firm is involved in the provision of Engineering Consultancy and related services in

the field of civil and structural engineering which broadly covers the following;

Urban and site planning projects

Transport networks

Social amenities and Recreation facilities

Urban Infrastructure

Civil engineering

Roads, railways and bridges

Ports and harbors

Plant foundations

Underground facilities

Water supply and sewerage

River and water control systems

General civil construction

Dams, water pans, boreholes and irrigation systems

Reservoir and elevated storage systems

Building and associated works

The full time staff of the company consists of professionals and technical personnel

with experience in road, water, and building construction.

The company also has invested in its staff by training some of its senior staff in labor-

based works at Kenya Institute of Highways and Building Technology (KIHBIT).

Company’s Plant, Equipment

We have the following survey equipment;

Survey Equipment

i. Total stations - Leica TC 1010, TC1610

ii. Reflectors - Portable

iii. EDM - Sokkisha

iv. Battery and Battery Charger – Portable

v. Theodolite – T2

vi. GPS - Garmin GPS, Magellan GPS 2000 portable

vii. Automatic level – with levelling staffs

viii. Tripods – wooden / metallic

Computers and software

i. 5 No. Desktop + Laptop PCs

ii. 1 No. A4 HP Laser Printer,

iii. 2 No. A3 HP DeskJet Printers

iv. AutoCAD 2009, 2010 & 2011

v. Topo CAD 2000, GPPS

vi. ArchiCAD 12 & 13

vii. Prokon and Staad.pro

viii. Land Development Desktop for Civil Design of Roads Hydraulics/Hydrology and

Surveying/Mapping (LDDR2)

ix. AutoCAD Civil 3D 2009, 2010 & 2011

x. CivilCAD 2010

xi. Ressim for Reservoir Simulation,

xii. Geoslope, Geo 5

xiii. ArcGIS,

xiv. WaterCad and Epanet for Hydraulic Modelling of Water Supply and Sewerage Networks

xv. EaglePoint Design Programme

xvi. MS Office - MS Word, Corel WP, Excel, PowerPoint, MS project

List of Construction Equipments and Their Condition

Type Make Condition Owned/leased

Isuzu Tipper Isuzu ELF Good Leased

Wheel tractor Caterpillar Good Leased

(Backhoe Loader)

Motor Vehicle (Toyota Toyota corolla Good Owned

corolla)

Nissan Pick up Nissan Good Leased

Tractor With Towed International Good Leased

Trailer

Power Saw Hursqvanna 394 New Owned

Porker Vibrator Honda - 2 New Owned

Concrete Mixer Lister Old Owned

Culvert Moulds Size 900mm 4no. 600mm 8no. Old Owned

450mm 2no.

Other machines and equipment that will be necessary during work execution shall be

hired by us to achieve the completion period.

List of Hand Tools Owned

Description Type No. Condition

Jembe Crocodile 5 New

Mattock/Fork Jembe Crocodile 7 Good

Wheel Barrows Jua Kali 4 Ok

Pickaxe Jua Kali 3 Good

Craw Bar/Mallet Crocodile 4 Good

Tape Measure 50m Made In China 3 Fair

Hammer Mason Crocodile 6 Fair

Shovels Made In Kenya 2 Good

Rake And Spreader Jua Kali 3 Fair

Ranging Rods Jua Kali 5 Ok

Slasher Made in China 6 Good

Panga Made in China 5 Good

Axe Made in China 5 Good

Spades Jua Kali 4 Good

Mason Trowels Wood And Steel). Jua Kali 5 Good

Hand Saw Made in Kenya 2 Good

Brooms Made in Kenya 7 Good

Drums 210 Litres Made in Kenya 5 Good

Bucket Metal 20 Litres Jua Kali 10 Good

Hand tools that are not captured on this list and are necessary in executing the

work shall be acquired by us.

Our Approach

We undertake to put in place all the required professional and technical staff, backup

equipment and services to accomplish projects within scheduled time.

Our resource base is such that mobilization of personnel and equipment will be

accomplished within the shortest period possible to the benefit of the client.

To ensure full compliance with design and specification requirements and to further

ensure that the best practice is followed during execution, we undertake to:-

All works shall be carried out in accordance with standards and codes of professional

practice.

COMPANY STRUCTURE

ORGANIZATION CHART