a compact footprint - amiad.com · Activated by a pre-determined time trigger or differential pressure, ... (Reinforce Polyamide) or RPP (Reinforce Polypropylene) Manifolds PP (Polypropylene)

2”-3” SpinKlinTM Automatic disc filtration system for low to medium flow rates in a compact footprint

inlet/outlet connection flow rates filtration degrees max. working pressure

2” SK: 80 - 150 mm (3” - 6”)

3” SK: 150 - 200 mm (6” - 8”)

10-120 m3/h (44-530 gpm)

90-200 m3/h (400-880 gpm)

and higher

20-400 micron 10 bar (145 psi)

features:

• Micron-precise depth filtration of solids

• Innovative disc technology captures and retains large amounts of solids

• Long-term operation with minimal maintenance

• Easy and simple operation

• Short automatic backwash with regulated water volume for a small water footprint

• Permanently eliminates the need to replace filter media

• Compact design

How the 2”- 3” SpinKlinTM Systems Filters Work

GeneralThe Arkal 2”- 3” SpinKlinTM series are modular, all polymeric, automatic disc filters with a patented self-cleaning backwash mechanism.The 2”- 3” SpinKlinTM systems range in flow rates from 10 m3/h (44 gpm) to 200 m3/h (880 gpm) with filtration degrees ranging from 20 - 400 micron. Inlet/Outlet from 80 - 200 mm (3”- 8”) diameter.

The Filtration ProcessThe discs are stacked on the SpinKlinTM spine and assembled according to pre-determined water filtration requirements. During filtration, the discs are compressed by means of a pre-loaded spring and differential pressure, forcing the water to pass through the grooved disc surface, thus trapping the solids.

The Backwash ProcessActivated by a pre-determined time trigger or differential pressure, the system enters backwash mode. The inlet valve port shuts while the drain valve port opens. During the backwash process, pressure is released and the spine’s piston elevates, releasing the compression on the discs. Tangential jets of filtered water are then forced through the nozzles positioned along the spine. At this stage the discs spin freely, loosening the trapped solids which are then flushed out. During the flushing cycle each filter pod is backwashed sequentially, while the other pods continue to supply filtered water downstream. When a pod begins the backwash cycle, the system valves automatically reverse the flow in the pod, allowing filtered downstream pressurized water to backwash the filter.

External Source Backwash Each filter is backwashed sequentially, while the other filters continue to supply filtered water downstream. In each backwashed filter the inlet & outlet valves automatically close and the drain & external source valves automatically open. Pressurized filtered water from the external source header enters the backwashed filter through its outlet port and backwashes it.• Higher energy for low operating pressure applications and fine filtration degrees

Air Aided Backwash (for 2” SpinKlinTM systems only)Main benefits:• Enhanced cleaning power, especially on fine filtration degrees• Less backwash water volume• Low pressure operation• Reduced backwash time per filter pod (<10 sec)• The air and water mix at a minimum pressure of 2.5 bar generates the optimal cleaning performance in SpinKlinTM technology

During the flushing cycle, each filter pod is backwashed sequentially while the other pod continues to supply filtered water downstream. When a pod begins the backwash cycle, the valves automatically reverse the flow in the pod, and open the air valve, allowing compressed air to push the filtered water stored in the accumulator through the backwash manifold and into the SpinKlinTM filter being backwashed.

Each backwash cycle requires a time delay to allow the water tank to be filled with clean water and air, making the total backwash duration longer than in regular systems.A clean & dry air pressure source is necessary to operate the filtration system (supplied by the customer).

Construction materials

Filter Housing & Lid RPA (Reinforce Polyamide) or RPP (Reinforce Polypropylene)

Disc elements PP (Polypropylene) or PA (Polyamide)

Backwash valves RPA (Reinforce Polyamide) or RPP (Reinforce Polypropylene)

Manifolds PP (Polypropylene)

Seals NBR or EPDM, (Viton optional)

Control Tubing PE or PA

Disc material type availability according to filtration degree:

Color Code Gray Purple Green Brown Black Red Yellow Blue

Micron 20 40 55 70 100 130 200 400

PP Disc PA (Nylon) Disc PP, PA PP PP, PA PP, PA PP, PA PP, PA PP, PA PP

Filter Type 2 unit battery 3 unit battery 4 unit battery

General Data

Max. working pressure 10 bar (145 psi)

Min. backwash pressure 2.8 bar (40.6 psi)

Maximum recommended flow rate

100µ 30 m3/h (132 gpm) 45 m3/h (198 gpm) 60 m3/h (264 gpm)



Available filtration degrees 400, 200, 130, 100, 70, 55, 40, 20 micron

Filtration volume 2,296 cm3 (140 in3) 3,444 cm3 (210 in3) 4,592 cm3 (280 in3)

Inlet/Outlet diameter 80 mm (3”) 100 mm (4”)

Max. working temperature 60°C (140°F)

Dry weight standard 27 kg (59.5 lb) 38 kg (83.7 lb) 49 kg (108 lb)

Backwash Data

Drain connection 50 mm (2”)

Flushing time 20 seconds

Min. flow for backwash 10 m3/h (44 gpm)

Typical Installation Drawing

SK 2” Batteries

Head Loss Graphs (in clean water)

2 x 2” SK Battery 4 x 2” SK Battery3 x 2” SK Battery

400µ 100µ 55µ 20µ

Dimensions 2 unit battery 3 unit battery 4 unit battery

A Length 706 mm (28”) 964 mm (38”) 1,214 mm (48”)

B Width 660 mm (26”)

C Height 747 mm (30”)

D

E

F

C

1 2 3 4

B

A

321 54 6 7 8

A

B

SHEET 1 OF 1

Inlet / Outlet diameter

ASA, BSTD, DIN, ASA, BSTD, DIN,06/11/2012

12/11/2012

Dimensions

65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \ 1625P0403U3 CATALOG

SUBJECT/PROJECT:

PART NAME/TITLE:

3*2'' S.K. FILTERS PLASTIC BATTERYCAT. NO:

DRAWN

CHECKED

APPROVED

B.O.M.

NAME DATEELIRAN

Confidential property information.

NIKOLAY

DRW. NO:

1625P0403U3 CATALOGASSEMBLY DRAWING

DATE DESCRIPTION NAMEREV.

SIZE: A3Ref.

Backup Drawing:

Rev.0

C

D

E

F

SCALE: NOAmiad Water Systems Ltd.reserves the rights to make changes.

All copy rights reserved toAmiad Water Systems Ltd.

Width

E

D

C

B

A

2

66026"

74730"

4"

2"

Length

Height

Inlet / Outletconnection

Drain diameterDrain connection

Battery dry weightlbsKg

inch

inch

inchmminchmminchmm 706

28"66026"74730"

4"

2" 2"

4"

26"66038"964

3

30"747

48"1214

4No. of Filters

UnitsDescription

3884

2760

49109

Arkal UniversalFlange:

ASA, BSTD, DIN,JIS


JIS


JIS

BSPT femalethreaded

BSPT femalethreaded

BSPT femalethreaded

MATERIAL:

IN

A

DRAIN

OUT

B

C

D

E

F

C

1 2 3 4

B

A

321 54 6 7 8

A

B

SHEET 1 OF 1


ASA, BSTD, DIN, ASA, BSTD, DIN,06/11/2012

12/11/2012

Dimensions


SUBJECT/PROJECT:

PART NAME/TITLE:

3*2'' S.K. FILTERS PLASTIC BATTERYCAT. NO:

DRAWN

CHECKED

APPROVED

B.O.M.

NAME DATEELIRAN


NIKOLAY

DRW. NO:

1625P0403U3 CATALOGASSEMBLY DRAWING


SIZE: A3Ref.

Backup Drawing:

Rev.0

C

D

E

F



Width

E

D

C

B

A

2

66026"

74730"

4"

2"

Length

Height




inch

inch


28"66026"74730"

4"

2" 2"

4"

26"66038"964

3

30"747

48"1214

4No. of Filters

UnitsDescription

3884

2760

49109


ASA, BSTD, DIN,JIS


JIS


JIS

BSPT femalethreaded

BSPT femalethreaded

BSPT femalethreaded

MATERIAL:

IN

A

DRAIN

OUT

B

C

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

20

4

10

2

6

20

100 60

6 10

40

100

400 200

50 1 0.01

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

20

4

10

2

6

20

100 60

6 10

40

100

400 200

50 1 0.01

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

20

4

10

2

6

20

100 60

6 10

40

100

400 200

50 1 0.01

2 x 2” SK Battery EX.S. 3 x 2” SK Battery EX.S. 4 x 2” SK Battery EX.S.

Head Loss Graphs (in clean water) 400µ 100µ 55µ 20µ


A Length 706 mm (28”) 964 mm (38”) 1214 mm (48”)


C Height 973 mm (38”)

Tues

day,

Nove

mber

13, 2

012 7

:05:50

AM

D

E

F

C

1 2 3 4

B

A

321 54 6 7 8

A

B

SHEET 1 OF 1

Dimensions

Width

E

D

C

B

A

2

83833"

97438"

4"Arkal Universal

Flange:ASA, BSTD, DIN,

JIS

2"BSPT female

threaded

Length

Height





inch

inch


28"83833"

97438"4"


ASA, BSTD, DIN,JIS

2"BSPT female

threadedBSPT female

threaded

2"


ASA, BSTD, DIN,JIS

4"

33"83838"1241

3

38"974

48"1541

4No. of Filters

UnitsDescription

10246 73

16259131

65 7 8PATH-T: \ DRAWINGS ARKAL CATALOG-SOLID \ BATTERIES \ INDUSTRY CATALOG \ SOLIDWORKS \ 1626M0403U3 CATALOG

SUBJECT/PROJECT:

PART NAME/TITLE:

3*2" S.K. FILTERS "A.F.E.S." PLASTIC BATTERYCAT. NO:

DRAWN

CHECKED

APPROVED

B.O.M.

NAME DATEELIRAN 07/11/2011


NIKOLAY

DRW. NO:

1626M0403U3 CATALOGASSEMBLY DRAWING


SIZE: A3Ref.

Backup Drawing:

Rev.0

C

D

E

F



1626M0403U3 CATALOG12/11/2011

MATERIAL:

A

IN

DRAIN

OUT

EX.S.

B

C

Tues

day,

Nove

mber

13, 2

012 7

:05:50

AM

D

E

F

C

1 2 3 4

B

A

321 54 6 7 8

A

B

SHEET 1 OF 1

Dimensions

Width

E

D

C

B

A

2

83833"

97438"

4"Arkal Universal


JIS

2"BSPT female

threaded

Length

Height





inch

inch


28"83833"

97438"4"


ASA, BSTD, DIN,JIS

2"BSPT female

threadedBSPT female

threaded

2"


ASA, BSTD, DIN,JIS

4"

33"83838"1241

3

38"974

48"1541

4No. of Filters

UnitsDescription

10246 73

16259131


SUBJECT/PROJECT:

PART NAME/TITLE:

3*2" S.K. FILTERS "A.F.E.S." PLASTIC BATTERYCAT. NO:

DRAWN

CHECKED

APPROVED

B.O.M.



NIKOLAY

DRW. NO:



SIZE: A3Ref.

Backup Drawing:

Rev.0

C

D

E

F



1626M0403U3 CATALOG12/11/2011

MATERIAL:

A

IN

DRAIN

OUT

EX.S.

B

C

SK 2” Batteries External Source


General Data











Dry weight EX.S. backwash 46 kg (102 lb) 59 kg (131 lb) 73 kg (162 lb)

Backwash Data




0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

20

4

10

2

6

20

100 60

6 10

40

100

400 200

50 1 0.01

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

20

4

10

2

6

20

100 60

6 10

40

100

400 200

50 1 0.01

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

20

4

10

2

6

20

100 60

6 10

40

100

400 200

50 1 0.01


** Air Aided system flushing time and volume depend on air tank size.


General Data


Min. down stream pressure* 1 bar (15 psi)









Dry weight standard 59 kg (131 lb) 73 kg (162 lb) 89 kg (197 lb)

Air flow requirements 270 l/min (71 gpm) at 6-8 bar (87-116 psi)

Backwash Data

Valve drain port 50 mm (2”)

Flushing time** 7 seconds

Volume of backwash (not include air)** 12 liter (3.2 gallons)

2 x 2” SK Battery AAF 3 x 2” SK Battery AAF 4 x 2” SK Battery AAF



A Length 941 mm (37”) 1,241 mm (49”) 1,541 mm (61”)


C Height 1,128 mm (44”)

D

E

F

C

1 2 3 4

B

A

321 54 6 7 8

A

B

SHEET 1 OF 1

Width

E

D

C

B

A

2

86834"

112844"

4"Arkal Universal


JIS

2"BSPT female

threaded

Length

Height





inch

inch


37"86834"

112844"4"


ASA, BSTD, DIN,JIS

2"BSPT female

threadedBSPT female

threaded

2"


ASA, BSTD, DIN,JIS

4"

34"86849"1241

3

44"1128

61"1541

4No. of Filters

UnitsDescription

73162

89197

59131


SUBJECT/PROJECT:

PART NAME/TITLE:

3*2'' S.K. FILTERS PLASTIC ''AAF'' BATTERYCAT. NO:

DRAWN

CHECKED

APPROVED

B.O.M.



DRW. NO:



SIZE: A3Ref.

Backup Drawing:

Rev.0

C

D

E

F



NIKOLAY 12/11/2012

NIKOLAY

MATERIAL:

A

OUT

AIRINLET

IN

DRAIN

B

C

SK 2” Batteries Air Aided

D

E

F

C

1 2 3 4

B

A

321 54 6 7 8

A

B

SHEET 1 OF 1

Width

E

D

C

B

A

2

86834"

112844"

4"Arkal Universal


JIS

2"BSPT female

threaded

Length

Height





inch

inch


37"86834"

112844"4"


ASA, BSTD, DIN,JIS

2"BSPT female

threadedBSPT female

threaded

2"


ASA, BSTD, DIN,JIS

4"

34"86849"1241

3

44"1128

61"1541

4No. of Filters

UnitsDescription

73162

89197

59131


SUBJECT/PROJECT:

PART NAME/TITLE:

3*2'' S.K. FILTERS PLASTIC ''AAF'' BATTERYCAT. NO:

DRAWN

CHECKED

APPROVED

B.O.M.



DRW. NO:



SIZE: A3Ref.

Backup Drawing:

Rev.0

C

D

E

F



NIKOLAY 12/11/2012

NIKOLAY

MATERIAL:

A

OUT

AIRINLET

IN

DRAIN

B

C

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

20

4

10

2

6

20

100 60

6 10

40

100

400 200

50 1 0.01

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

20

4

10

2

6

20

100 60

6 10

40

100

400 200

50 1 0.01

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

20

4

10

2

6

20

100 60

6 10

40

100

400 200

50 1 0.01


SK 3” Batteries


General Data









Inlet/Outlet diameter 150 mm (6”)


Dry weight standard 95 kg (209 lb) 115 kg (253 lb) 135 kg (297 lb)

Backwash Data





3 x 3” SK Battery 4 x 3” SK Battery 5 x 3” SK Battery


A Length 942 mm (37 3/32”) 1,192 mm (46 15/16”) 1,442 mm (56 25/32”)

B Width 853 mm (33 19/32”)

C Height 1,287 mm (50 21/32”)50 21/32''50 21/32''

33 19/32''33 19/32''


ASA, BSTD, DIN,JIS

5Units

B

A


Height

Width

Length

DescriptionNo. of filters

inch

3"


ASA, BSTD, DIN,JIS


ASA, BSTD, DIN,JIS


ASA, BSTD, DIN,JIS

3" 3"

6"

3 41192

6"6"

mminchmm

mminch

inch

inch

Kglbs

Battery dry waight

Drain connection

Drain diameter

connectionInlet / OutletD

C

EArkal Universal


JIS


ASA, BSTD, DIN,JIS

853

12871287 1287

853 853

942 144237 3/32'' 46 15/16'' 56 25/32''

33 19/32''

50 21/32''

95 115 135209 253 297


Tues

day,

Nove

mber

13, 2

012 7

:15:08

AM

D

E

F

C

1 2 3 4

B

A

321 5

C

D

4 6 7 8

A

B

SHEET 1 OF 1

A

DRAIN

IN

OUT

B

C

50 21/32''50 21/32''

33 19/32''33 19/32''


ASA, BSTD, DIN,JIS

5Units

B

A


Height

Width

Length

DescriptionNo. of filters

inch

3"


ASA, BSTD, DIN,JIS


ASA, BSTD, DIN,JIS


ASA, BSTD, DIN,JIS

3" 3"

6"

3 41192

6"6"

mminchmm

mminch

inch

inch

Kglbs

Battery dry waight

Drain connection

Drain diameter

connectionInlet / OutletD

C

EArkal Universal


JIS


ASA, BSTD, DIN,JIS

853

12871287 1287

853 853

942 144237 3/32'' 46 15/16'' 56 25/32''

33 19/32''

50 21/32''

95 115 135209 253 297


Tues

day,

Nove

mber

13, 2

012 7

:15:08

AM

D

E

F

C

1 2 3 4

B

A

321 5

C

D

4 6 7 8

A

B

SHEET 1 OF 1

A

DRAIN

IN

OUT

B

C

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

200

40

100

20

60

200

1000 600

60 100

400

1000

4000 2000

500 10 0.01

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

200

40

100

20

60

200

1000 600

60 100

400

1000

4000 2000

500 10 0.01

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

200

40

100

20

60

200

1000 600

60 100

400

1000

4000 2000

500 10 0.01


SK 3” Batteries External Source


General Data









Inlet/Outlet diameter 150 mm (6”)


Weight [empty] EX.S. backwash 110 kg (242 lb) 130 kg (286 lb) 150 kg ( 330 lb)

Backwash Data

Valve drain port 80 mm (3”)




3 x 3” SK Battery EX.S. 4 x 3” SK Battery EX.S. 5 x 3” SK Battery EX.S.



A Length 942 mm (37 3/32”) 1,192 mm (46 15/16”) 1,442 mm (56 25/32”)

B Width 853 mm (33 19/32”)

C Height 1,614 mm (63 17/32”)

63 17/32''

33 19/32''853

1614


ASA, BSTD, DIN,JIS


ASA, BSTD, DIN,JIS

E

C

D Inlet / Outletconnection

Drain / Ex. S. diameter

Drain / Ex. S. connection

Battery dry waightlbsKg

inch

inch

inchmm

mminchmm

6" 6"

43

6"

3"3"


ASA, BSTD, DIN,JIS


ASA, BSTD, DIN,JIS


ASA, BSTD, DIN,JIS

3"

inch

No. of filtersDescription

Length

Width

Height


A

B

Units5


ASA, BSTD, DIN,JIS

942 1192 144237 3/32'' 46 15/16'' 56 25/32''

853 85333 19/32'' 33 19/32''

1614 161463 17/32'' 63 17/32''

110 130 150242 286 330


SUBJECT/PROJECT:

PART NAME/TITLE:

4*3" S.K. FILTERS PLASTIC BATTERY

CAT. NO:

DRAWN

CHECKED

APPROVED

B.O.M.



DRW. NO:1638p0604U3 CATALOG

ASSEMBLY DRAWING

SIZE: A3Ref.

Backup Drawing:

Rev.0



NIKOLAY 13/11/2012 WITH EXTERNAL SOURCE FOR BACKFLUSH

D

E

F

C

1 2 3 4

B

A

C

D

A

B

SHEET 1 OF 1

SHEET 1 OF 1

MATERIAL:

A

OUT

DRAIN

IN

EX.S.

B

C

63 17/32''

33 19/32''853

1614


ASA, BSTD, DIN,JIS


ASA, BSTD, DIN,JIS

E

C

D Inlet / Outletconnection

Drain / Ex. S. diameter

Drain / Ex. S. connection

Battery dry waightlbsKg

inch

inch

inchmm

mminchmm

6" 6"

43

6"

3"3"


ASA, BSTD, DIN,JIS


ASA, BSTD, DIN,JIS


ASA, BSTD, DIN,JIS

3"

inch

No. of filtersDescription

Length

Width

Height


A

B

Units5


ASA, BSTD, DIN,JIS

942 1192 144237 3/32'' 46 15/16'' 56 25/32''

853 85333 19/32'' 33 19/32''

1614 161463 17/32'' 63 17/32''

110 130 150242 286 330


SUBJECT/PROJECT:

PART NAME/TITLE:

4*3" S.K. FILTERS PLASTIC BATTERY

CAT. NO:

DRAWN

CHECKED

APPROVED

B.O.M.



DRW. NO:1638p0604U3 CATALOG

ASSEMBLY DRAWING

SIZE: A3Ref.

Backup Drawing:

Rev.0



NIKOLAY 13/11/2012 WITH EXTERNAL SOURCE FOR BACKFLUSH

D

E

F

C

1 2 3 4

B

A

C

D

A

B

SHEET 1 OF 1

SHEET 1 OF 1

MATERIAL:

A

OUT

DRAIN

IN

EX.S.

B

C

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

200

40

100

20

60

200

1000 600

60 100

400

1000

4000 2000

500 10 0.01

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

200

40

100

20

60

200

1000 600

60 100

400

1000

4000 2000

500 10 0.01

0.11.4

0.02

0.080.06

0.04

0.4

0.2

0.3

0.7

0.5

0.4

1.0

0.60.8

0.2

7.0

5.0

3.04.0

2.0

14.0psi/bar

m3/hrgpm

200

40

100

20

60

200

1000 600

60 100

400

1000

4000 2000

500 10 0.01

The Americas Amiad USA Inc. Main Office and Manufacturing: 120-J Talbert Road, Mooresville, NC 28117,Tel: +1 704 662 3133, Fax: +1 704 662 3155, Toll Free: +1 800 24 FILTER, E-mail: [email protected] www.amiadusa.com

West Coast Sales Office and Warehouse:1251 Maulhardt Ave, Oxnard, CA 93030Tel: +1 805 988 3323, Fax: +1 805 988 3313, Toll Free: +1 800 969 4055

BrazilAmiad Sistemas de Água Ltda., Rua Funchal, 411, Conj. 42, Vila Olimpia, São Paulo, CEP 04551-060Tel: +55 11 31923824, E-mail: [email protected] Oil & Gas, E-mail: [email protected]

MexicoAmiad México SA DE CV, AV. Jesus del Monte #39B – INT 601, Col. Jesus del Monte, C.P. 52764, Huixquilucan, Estado de México, Tel/Fax: +52 55 636 28122, Mob: +52 1 55 4909 2202E-mail: [email protected] Office: [email protected]

Amiad Water Systems Europe SAS, Ilot No4 ZI La Boitardière, 37530 Chargé, France,Tel: +33 (0) 2 47 23 01 10, Fax: +33 (0) 2 47 23 80 67, E-mail: [email protected] Water Systems Europe SAS (Irrigation Division) 100 avenue de l’Anguillon, Z.I. des Iscles, 13160 Chateaurenard, Tel: +33 (0) 4 32 60 10 01, Fax +33 (0) 4 32 60 60 85

GermanyAmiad Water Systems SAS Europe (German branch office) Zweigniederlassung Deutschland Prinz-Regent-Str. 68 a 44795 Bochum,Tel: +49 (0) 234 588082-0, Fax: +49 (0) 234 588082-10, E-mail: [email protected]

United KingdomAmiad Water Systems UK Limited, Compass Business Centre, Unit 6, Lion Way, Swansea Enterprise Park, Swansea SA7 9FBTel: +44 (0)1792 277290, Fax: +44 (0)1792 797707, E-mail: [email protected]

Europe

IndiaAmiad Filtration India Pvt Limited, 305 Sai Commercial Building, Govandi St Rd, Govandi Mumbai 400 088, Tel: +91 22-67997813/14, Fax: +91 22-67997814, Email: [email protected] China (Yixing Taixing Environtec Co., Ltd.) 70 Baihe Chang, Xingjie Yixing Jiangsu, 214204,Tel: +86 510 87134000, Fax: +86 510 87134999, E-mail: [email protected] AsiaFiltration & Control Systems Pte. Ltd., 22 Sin Ming Lane #07-71 Midview City, Singapore 573969, Tel: +65 6 337 6698, Fax: +65 6 337 8180, E-mail: [email protected]

Asia

Amiad Australia Pty Ltd. 138 Northcorp Boulevard, Broadmeadows, Victoria 3047,Tel: +61 3 93585800, Fax: +61 3 93585888, E-mail: [email protected]

Australia

Amiad Water Systems Ltd. D.N. Galil Elyon 1, 1233500, Israel,Tel: +972 4 690 9500, Fax: +972 4 814 1159,E-mail: [email protected]

Headquarters

W A T E R S Y S T E M S

www.amiad.com 910101-000559/11.2016

Copyright © 2013 Amiad Water Systems Ltd. All rights reserved. The contents of this catalogue including without limitation all information and materials, images, illustrations, designs, icons, photographs, graphical presentations, designs, literary works, data, drawings, slogans, phrases, names, trademarks, titles and any other such materials that appear in this catalogue (collectively, the “Contents”) are the sole property of Amiad Water Systems Ltd. (“Amiad”). Amiad has sole and exclusive right, title and interest in the Contents, including any intellectual property rights, whether registered or not, and all know-how contained or embodied therein. You may not reproduce, publish, transmit, distribute, display, modify, create derivative works from, sell or participate in any sale of, or exploit in any way, in whole or in part, any of the Contents or the catalogue. Any use of the catalogue or the Contents, other than for personal use, requires the advanced written permission of Amiad.

Documents

a compact footprint - amiad.com · Activated by a pre-determined time trigger or differential pressure, ... (Reinforce Polyamide) or RPP (Reinforce Polypropylene) Manifolds PP (Polypropylene)