13
leather 1 Ducati Corse 14 9810211 Disegnata esclusivamente per Ducati da Drudi Performance e realizzata da Dainese in pelle D-Skin parzialmente perforata, la tuta intera racing è il capo principe della linea Ducati Corse 14. All’avanguardia nell’utilizzo dei materiali e progettata per unire piacere di guida e massima sicurezza. La tuta si adatta perfettamente alle forme del corpo racchiudendo armonicamente tutte le protezioni e gli slider per garantire un livello di protezione maggiore delle parti sensibili in caso di caduta. I nuovi inserti elastici biassiali e gli inserti in tessuto elastico assicurano un elevato comfort e consentono la massima libertà di movimento. Gobba aerodinamica con alloggiamento water bag e fodera removibile in tessuto 3D-Bubble. Designed exclusively for Ducati by Drudi Performance and manufactured by Dainese from their top of the line D-Skin leather. The new 2014 one piece leather suit is a graphic and technical update to the race inspired Ducati Corse line. This partially perforated suit has been designed with safety as its number one priority. A new more tailored fit snugly holds armor and sliders in place to provide a higher level of protection in the event of a slide. This has been combined with a new stretch panels and elastic inserts in non impact zones for an improved range of motion, and a speed hump designed to accommodate a water bag and a removable bubble liner for added rider comfort. Materiali / Materials Esterno / Outside - Pelle bovina D-skin (spessore 1,2 +/- 0,1 mm) / D-skin cowhide (thickness 1,2 +/- 0,1 mm) - Tessuto S1 / S1 fabric Interno / Inside - Fodera removibile in NanoFeel® con inserti in tessuto 3D-Bubble / Detachable NanoFeel® lining with 3D-Bubble inserts - Fodera removibile in cotone (a parte, cod. 9810272-) / Detachable cotton lining (sold separately item 9810272-) Comfort - Elastico biassiale / Biaxial elastic - Microelastici / Micro-stretch inserts - Elastici in pelle / Leather stretch inserts - Doppia cerniera su polpaccio / Double zipper on calf Plus - 1 tasca interna / 1 inside pocket - Perforazione localizzata / Localised perforation - Slider - Water bag (a parte, cod. 981029460) / Water bag (sold separately, item 981029460) Simboli di lavaggio / Care symbols codice - code taglie - sizes perforata / perforated Tuta intera racing / One-piece leather suit 48 50 52 54 56 58 60 48 50 52 54 56 58 60 Protezioni / Protections Composite termoformate certificate secondo la norma EN 1621.1/97 / In thermoformed composite material, pursuant to EN 1621.1/97 Inserti preformati in alluminio / Molded aluminum inserts Gobba aerodinamica / Aerodynamic hump Morbide Pro Shape certificate secondo la norma EN 1621.1/97 / Pro Shape soft protectors, certified according to EN 1621.1/97 Predisposto per l’inserimento del paraschiena Company 11/12 (a parte) / Fits Company 11/12 back guard (sold separately)

9810211 perforata / perforated

  • Upload
    others

  • View
    8

  • Download
    0

Embed Size (px)

Citation preview

Page 1: 9810211 perforata / perforated

leather 1

Ducati Corse 14

9810211

Disegnata esclusivamente per Ducati da Drudi Performance e realizzata da Dainese in pelle D-Skin parzialmente perforata, la tuta intera racing è il capo principe della linea Ducati Corse 14. All’avanguardia nell’utilizzo dei materiali e progettata per unire piacere di guida e massima sicurezza. La tuta si adatta perfettamente alle forme del corpo racchiudendo armonicamente tutte le protezioni e gli slider per garantire un livello di protezione maggiore delle parti sensibili in caso di caduta. I nuovi inserti elastici biassiali e gli inserti in tessuto elastico assicurano un elevato comfort e consentono la massima libertà di movimento. Gobba aerodinamica con alloggiamento water bag e fodera removibile in tessuto 3D-Bubble.

Designed exclusively for Ducati by Drudi Performance and manufactured by Dainese from their top of the line D-Skin leather. The new 2014 one piece leather suit is a graphic and technical update to the race inspired Ducati Corse line. This partially perforated suit has been designed with safety as its number one priority. A new more tailored fit snugly holds armor and sliders in place to provide a higher level of protection in the event of a slide. This has been combined with a new stretch panels and elastic inserts in non impact zones for an improved range of motion, and a speed hump designed to accommodate a water bag and a removable bubble liner for added rider comfort.

Materiali / MaterialsEsterno / Outside- Pelle bovina D-skin (spessore 1,2 +/- 0,1 mm) / D-skin cowhide (thickness 1,2 +/- 0,1 mm)

- Tessuto S1 / S1 fabric

Interno / Inside- Fodera removibile in NanoFeel® con inserti in tessuto 3D-Bubble / Detachable NanoFeel® lining with 3D-Bubble inserts

- Fodera removibile in cotone (a parte, cod. 9810272-) / Detachable cotton lining (sold separately item 9810272-)

Comfort- Elastico biassiale / Biaxial elastic - Microelastici / Micro-stretch inserts- Elastici in pelle / Leather stretch inserts- Doppia cerniera su polpaccio / Double zipper on calf

Plus- 1 tasca interna / 1 inside pocket- Perforazione localizzata / Localised perforation- Slider- Water bag (a parte, cod. 981029460) / Water bag (sold separately, item 981029460)

Simboli di lavaggio / Care symbols

codice - code

taglie - sizes

perforata / perforated

Tuta intera racing / One-piece leather suit48 50 52 54 56 58 60

48 50 52 54 56 58 60

Protezioni / ProtectionsComposite termoformate certificate secondo la norma EN 1621.1/97 / In thermoformed composite material, pursuant to EN 1621.1/97 Inserti preformati in alluminio / Molded aluminum inserts Gobba aerodinamica / Aerodynamic humpMorbide Pro Shape certificate secondo la norma EN 1621.1/97 / Pro Shape soft protectors, certified according to EN 1621.1/97 Predisposto per l’inserimento del paraschiena Company 11/12 (a parte) / Fits Company 11/12 back guard (sold separately)

Page 2: 9810211 perforata / perforated

leather 4

Ducati Corse 14

9810213

La tuta spezzata in pelle Ducati Corse 14 unisce le dotazioni di sicurezza di una tuta da pista alla comodità e allo stile di un capo di abbigliamento da strada. Dalla pista eredita la linea, studiata per garantire una posizione di guida 100% sportiva; dalla strada la grande vestibilità che combina pelle, protezioni e nuovi inserti elastici maggiorati, per una completa libertà di movimento. Giacca e pantaloni sono dotati di fodera non rimovibile in tessuto 3D-Bubble e cerniera di unione in vita. E’ la soluzione ideale per chi ama guidare su strada senza rinunciare alla sicurezza delle dotazioni da pista.

The 2014 two piece Ducati Corse leather suit represents a balance between track ready safety features, and street ready convenience and style. The track inspired fit is designed sit comfortably in a tucked sport riding position. The snug fit holds the leather and armor perfectly in place under even the most aggressive conditions. New construction details have been included to provide increased stretch panels in non impact zones for rider comfort. Both jacket and pants are fitted with a non removable bubble liner. Jacket and pants are connected with a full length waist zipper. The two piece suit is perfect for occasional track riders and street riders looking for track ready safety features.

Materiali / MaterialsEsterno / Outside- Pelle bovina Tutu (spessore mm 1,2 +/- 0,1) / Tutu cowhide (thickness 1,2 +/- 0,1 mm)

- Tessuto S1 / S1 fabric

Interno / Inside- Fodera fissa in NanoFeel® con inserti in tessuto 3D-Bubble / Fixed NanoFeel® lining with 3D-Bubble inserts

Comfort- Microelastici / Micro-stretch inserts- Elastici in pelle / Leather stretch inserts- Doppia cerniera su polpaccio / Double zipper on calf

Plus- 1 tasca interna / 1 inside pocket- Inserti rifrangenti / Reflecting inserts- Cerniera di unione giubbino a pantaloni / Jacket-to-pants zipper- Slider / Slider

Simboli di lavaggio / Care symbols

codice - code

taglie - sizes

Protezioni / ProtectionsComposite termoformate certificate secondo la norma EN 1621.1/97 / In thermoformed composite material, pursuant to EN 1621.1/97 Inserti preformati in alluminio / Molded aluminum inserts Gobba aerodinamica / Aerodynamic humpMorbide Pro Shape certificate secondo la norma EN 1621.1/97 / Pro Shape soft protectors, certified according to EN 1621.1/97 Predisposto per l’inserimento del paraschiena Company 11/12 (a parte) / Fits Company 11/12 back guard (sold separately)

Tuta spezzata / Two-piece suit48 50 52 54 56 58 60

48 50 52 54 56 58 60

Page 3: 9810211 perforata / perforated

leather 5

Ducati Corse 14

9810214981021698102159810217

Un capo da sempre riservato al vero Ducatista, pensato per chi ama la strada ma vuole un look aggressivo quasi da pista ed un alto livello di dotazioni di sicurezza. Disponibile per il 2014 in due varianti cromatiche, include tutte le dotazioni naturali per un capo Ducati Corse: pelle D-skin, cerniera di unione in vita, predisposizioni per inserimento paraschiena e chest protector. Traspirazione ottimale in ogni condizione, eccellente nella versione perforata, grazie al tessuto 3D-Bubble che migliora il comfort di guida in condizioni di clima caldo, con i vantaggi e la protezione di un giubbino in pelle. Un vero must per il Ducatista, segno distintivo di una passione inconfondibile.

The Ducati Corse leather jacket has always offered Ducatisti track ready styling and safety features in a jacket that is ready for the street. Available in two stylish color choices for 2014 with all the safety and comfort features you’d expect from Ducati Corse: D-skin leather, full length waist zipper as well as pockets for both back and chest protectors. Dainese’s unique 3D-Bubble liner facilitates constant air flow through the perforated version to provide a more comfortable riding experience in warm weather without compromising on the safety of a leather jacket. A consistently top selling style - the Ducati Corse leather jacket is a must.

Materiali / MaterialsEsterno / Outside- Pelle bovina D-skin (spessore 1,2 +/- 0,1 mm) / D-skin cowhide (thickness 1,2 +/- 0,1 mm)

- Tessuto S1 / S1 fabric

Interno / Inside- Fodera fissa 3D-Bubble / 3D-Bubble fixed lining

Comfort- Inserti in tessuto elastico su giro-manica e braccia / Elasticized fabric inserts on arms and armhole

Plus- 2 tasche esterne, 2 interne / 2 outer pockets, 2 inside pockets- Cerniera di unione giubbino a pantaloni / Jacket-to-pants zipper- Inserti rifrangenti / Reflecting inserts- Perforazione localizzata / Localised perforation (9810216-, 9810217-)

Simboli di lavaggio / Care symbols

codice - code

taglie - sizes

Protezioni / ProtectionsComposite termoformate certificate secondo la norma EN 1621.1/97 / In thermoformed composite material, pursuant to EN 1621.1/97 Inserti preformati in alluminio / Molded aluminum insertsPredisposto per l’inserimento del paraschiena G2 Wave (a parte cod. 981011400) / Fits G2 Wave back guard (sold separately, item 981011400)Predisposto per l’inserimento della protezione chest (a parte cod. 98101120-)/ Fits Chest protector (sold separately, item 98101120-)

rosso / red

perforato rosso / red perforated

nero / black

perforato nero / black perforated

Giubbino in pelle / Leather jacket48 50 52 54 56 58 60

48 50 52 54 56 58 60

Page 4: 9810211 perforata / perforated

leather 8

Dark Armour

9810189

Per il centauro metropolitano. Dotato di protezioni certificate CE su spalle e gomiti e predisposto per l’inserimento del paraschiena G2 e del paratorace (venduti separatamente), il giubbino in pelle Dark Armour si distingue per l’utilizzo di inserti micro-elastici sui fianchi che esaltano le forme e assicurano grande libertà nei movimenti. Interamente realizzato in morbida pelle non perforata con fodera 3D-Bubble per il massimo comfort, il giubbino è dotato di cerniera di unione che lo rende compatibile con qualsiasi pantalone Ducati predisposto. Un capo dal look essenziale ed esclusivo, impreziosito dal logo Ducati termoformato sul cuore.

The Dark Armor jacket provides a stealth style for the urban riders. Safety features include CE certified shoulder and elbow armor and thermo-pressed Ducati logo. This jacket is pocketed for both a Daines G2 Back protector and a Chest protector (sold separately). Unique leather construction in the side panels of this jacket create a slim, muscular shape while also providing small amounts of stretch for comfortable fit and ease of movement. This jacket has a full bubble liner for improved rider comfort. The full length jacket to pant waist zipper is compatible with any Ducati zippered riding pants. Available in non perforated version only.

Materiali / MaterialsEsterno / Outside- Pelle bovina Comfort (spessore mm 1,1 +/- 0,1) / Comfort cowhide (thickness 1,1 +/- 0,1 mm)

Interno / Inside- Fodera fissa a bolle / Bubble fixed lining

Comfort- Inserti in tessuto elastico su giro-manica e braccia / Elasticized fabric inserts on arms and armhole

Plus- 2 tasche esterne, 1 interna / 2 outer pockets, 1 inside pocket- Cerniera di unione giubbino a pantaloni / Jacket-to-pants zipper

Simboli di lavaggio / Care symbols

codice - code

taglie - sizes

Protezioni / ProtectionsComposite termoformate certificate secondo la norma EN 1621.1/97 / In thermoformed composite material, pursuant to EN 1621.1/97 Inserti preformati in alluminio / Molded aluminum inserts Predisposto per l’inserimento del paraschiena G2 Wave (a parte cod. 981011400) / Fits G2 Wave back guard (sold separately, item 981011400)Predisposto per l’inserimento della protezione chest (a parte cod. 98101120-) / Fits Chest protector (sold separately, item 98101120-)

Giubbino in pelle / Leather jacket48 50 52 54 56 58 60 62

48 50 52 54 56 58 60 62

Page 5: 9810211 perforata / perforated

leather 9

Hi-Tech 13

98102099810208

Progettato per una posizione di guida cittadina, il giubbino in pelle Hi-Tech 13 si distingue per il disegno lineare del busto e per la sua lunghezza, in particolare sulla schiena. Perfetta aderenza alle forme e grande libertà nei movimenti grazie agli ampi inserti elastici sull’interno braccia e alla fodera fissa 3D-Bubble. Equipaggiato con inserti preformati in alluminio sulle spalle e protezioni sui gomiti certificati CE, il giubbino Hi-Tech 13, in versione normale e perforata, ed è compatibile con qualsiasi pantalone Ducati predisposto grazie alla pratica cerniera di unione ai pantaloni.

Designed for a more up right riding position, the Hi-Tech 13 leather jacket has a straighter cut through the torso and a longer length, especially in the drop tail area. The cut of this jacket, and the range of available sizes makes this a perfect style for big and tall customers. Generous stretch panels through the inner arm provide easy movement without compromising on a snug fit. Safety features include CE Certified elbow and shoulder armor, molded aluminum shoulder plates, full length jacket to pants waist zipper (compatible with any zippered Ducati riding pants). Available in both perforated and non, with a full 3D-Bubble liner for rider comfort.

Materiali / MaterialsEsterno / Outside- Pelle bovina Tutu (spessore mm 1,2 +/- 0,1) /Tutu cowhide (thickness 1,2 +/- 0,1 mm)

Interno / Inside- Fodera fissa a bolle / Bubble fixed lining

Comfort- Inserti elastici su scapole e giro-manica / Stretch panels on shoulder blades and cuffs

Plus- 2 tasche esterne / 2 outer pockets- Cerniera di unione giubbino a pantaloni / Jacket-to-pants zipper- Inserti rifrangenti / Reflecting inserts

Simboli di lavaggio / Care symbols

codice - code

taglie - sizes

Protezioni / ProtectionsComposite termoformate certificate secondo la norma EN 1621.1/97 / In thermoformed composite material, pursuant to EN 1621.1/97 Inserti preformati in alluminio / Molded aluminum inserts Predisposto per l’inserimento del paraschiena G2 Wave (a parte cod. 981011400) / Fits G2 Wave back guard (sold separately, item 981011400) Predisposto per l’inserimento della protezione chest (a parte cod. 98101120-) / Fits Chest protector (sold separately, item 98101120-)

perforato / perforated

Giubbino in pelle / Leather jacket46 48 50 52 54 56 58 60

46 48 50 52 54 56 58 60

Page 6: 9810211 perforata / perforated

leather 10

Urban 14

98102559810256

44 46 48 50 52 54 56 58 60

44 46 48 50 52 54 56 58 60

Un capo essenziale dallo stile semplice e pulito. Minimale e di grande impatto l’effetto testuale creato dai loghi termoformati direttamente sulla pelle, senza l’impiego di caratteri o cuciture in rilievo. Leggero, perforato e dotato di protezioni morbide spalle e gomiti e fodera 3D-Bubble, il giubbino in pelle Urban 14 è perfetto per guidare al meglio nei contesti urbani e in condizioni di clima caldo.

The Urban 14 leather jacket features minimal construction and clean simple styling. Logos features are thermoformed directly into the leather to create textural detailing without additional bulk or stitching. This jacket equipped with 3D-Bubble liner is lightweight and perforated with soft elbow and shoulder armor for ultimate warm weather city riding comfort.

Materiali / MaterialsEsterno / Outside- Pelle bovina Nappalan (spessore 0,9 +/- 0,1 mm) / Nappalan cowhide (thickness 0,9 +/- 0,1 mm)

Interno / Inside- Fodera fissa 3D-Bubble / 3D-Bubble fixed lining

Comfort- Microelastici / Micro-stretch inserts

Plus- 2 tasche esterne, 1 interna / 2 outer pockets, 1 inside pocket- Gancio di unione giubbino a pantaloni / Jacket-to-pants connection loop- Perforazione localizzata / Localised perforation

Simboli di lavaggio / Care symbols

codice - code

taglie - sizes

Protezioni / ProtectionsMorbide Pro Shape certificate secondo la norma EN 1621.1/97 / Pro Shape soft protectors, certified according to EN 1621.1/97 Predisposto per l’inserimento del paraschiena G2 Wave (a parte cod. 981011400) / Fits G2 Wave back guard (sold separately, item 981011400)

perforato nero / black perforated

perforato marrone / brown perforated

Giubbino in pelle / Leather jacket

Page 7: 9810211 perforata / perforated

leather 11

80s 14

981022498102229810223

rosso / red

nero / black

perforato nero / black perforated

Ducati celebra lo stile 80’s con la nuova versione di uno dei giubbini in pelle più venduti nella storia del marchio. Prodotto da Dainese in morbida pelle Nappalan, questo giubbino è dotato di predisposizione per paraschiena e di un pratico gancio di unione che lo rende compatibile con un’ampia gamma di pantaloni. Disponibile in numerose taglie ed equipaggiato con protezioni spalle e gomiti certificate CE, sia in versione uomo che donna, il capo si mostra estremamente versatile e si adatta perfettamente allo stile di ogni motocilista.

The classic Ducati 80’s style returns to the Ducati collection. Manufactured by Dainese in soft cowhide leather, this jacket features standard back protector pockets and connection hanger (to connect jacket to pant) making this jacket compatible with a wide range of pants. CE Certified shoulder and elbow armor are fitted in both men’s and women’s styles. This leather jacket has a less aggressive fit and is available in a wide range of sizes making it a versatile style that will fit any rider. This new version of the 80’s jacket takes its style cues from one of Ducati’s best ever selling leather jackets.

Materiali / MaterialsEsterno / Outside- Pelle bovina Nappalan (spessore 0,9 +/- 0,1 mm) / Nappalan cowhide (thickness 0,9 +/- 0,1 mm)

Interno / Inside- Fodera fissa in cotone / Fixed cotton lining

Comfort- Inserti in tessuto elasticizzato su giro manica / Elasticized fabric inserts on armhole

Plus- 2 tasche esterne, 1 interna / 2 outer pockets, 1 inside pocket- Gancio di unione giubbino a pantaloni / Jacket-to-pants connection loop

Simboli di lavaggio / Care symbols

codice - code

taglie - sizes

Protezioni / ProtectionsMorbide Pro Shape certificate secondo la norma EN 1621.1/97 / Pro Shape soft protectors, certified according to EN 1621.1/97Predisposto per l’inserimento del paraschiena G2 Wave (a parte cod. 981011400) / Fits G2 Wave back guard (sold separately, item 981011400)

Giubbino in pelle / Leather jacket44 46 48 50 52 54 56 58 60 62

44 46 48 50 52 54 56 58 60 62

Page 8: 9810211 perforata / perforated

leather 12

80s 14

9810226

Ducati celebra lo stile 80’s con la nuova versione di uno dei giubbini in pelle più venduti nella storia del marchio. Prodotto da Dainese in morbida pelle Nappalan, questo giubbino è dotato di predisposizione per paraschiena e di un pratico gancio di unione che lo rende compatibile con un’ampia gamma di pantaloni. Disponibile in numerose taglie ed equipaggiato con protezioni spalle e gomiti certificate CE, sia in versione uomo che donna, il capo si mostra estremamente versatile e si adatta perfettamente allo stile di ogni motocilista.

The classic Ducati 80’s style returns to the Ducati collection. Manufactured by Dainese in soft cowhide leather, this jacket features standard back protector pockets and connection hanger (to connect jacket to pant) making this jacket compatible with a wide range of pants. CE Certified shoulder and elbow armor are fitted in both men’s and women’s styles. This leather jacket has a less aggressive fit and is available in a wide range of sizes making it a versatile style that will fit any rider. This new version of the 80’s jacket takes its style cues from one of Ducati’s best ever selling leather jackets.

Materiali / MaterialsEsterno / Outside- Pelle bovina Nappalan (spessore 0,9 +/- 0,1 mm) / Nappalan cowhide (thickness 0,9 +/- 0,1 mm)

Interno / Inside- Fodera fissa in cotone / Fixed cotton lining

Comfort- Inserti in tessuto elasticizzato su giro manica / Elasticized fabric inserts on armhole

Plus- 2 tasche esterne, 1 interna / 2 outer pockets, 1 inside pocket- Gancio di unione giubbino a pantaloni / Jacket-to-pants connection loop

Simboli di lavaggio / Care symbols

codice - code

taglie - sizes

Protezioni / ProtectionsMorbide Pro Shape certificate secondo la norma EN 1621.1/97 / Pro Shape soft protectors, certified according to EN 1621.1/97Predisposto per l’inserimento del paraschiena G1 Wave (a parte cod. 981011300) / Fits G1 Wave back guard (sold separately, item 981011300)

Giubbino in pelle / Leather jacket40 42 44 46 48 50

40 42 44 46 48 50

Page 9: 9810211 perforata / perforated

leather 13

Company 14

9810192098101900

Il giubbino in pelle Company 14, prodotto da Rev’it in esclusiva per Ducati, nasce dalla combinazione di pelli con finiture e colori in puro stile Ducati. Il tocco fashion che dona la striscia di pelle Nubuk sul petto nella versione nero su nero è una soluzione ricercata e originale per un capo da moto. Equipaggiato con protezioni standard CE su spalle e gomiti e predisposto per l’inserimento del paraschiena G1 o G2, questo modello è disponibile sia in vestibilità maschile che femminile. Company 14 è un articolo di grande appeal, destinato sia al Ducatista esperto che ai nuovi appassionati ed è pensato per un uso urbano e per i passeggeri in cerca di un abbinamento di stile.

The Company 14 leather jacket is produced by Rev’it and features a combination of different leather textures and colors. A Nubuk leather stripe in the center chest of the black on black version of this jacket offers a fashion treatment not often seen in a riding garment. This jacket is equipped with standard CE shoulder and elbow armor and is pocketed to take a Dainese G1 and G2 Back protectors and does not have a pant to jacket connection. However this product will have a sure appeal to a wide variety of Ducatisti from new riders, those looking for a stylish second jacket and passengers looking for a companion style.

Materiali / MaterialsEsterno / Outside- Pelle bovina (spessore 1,1-1,3 mm) / Cowhide (thickness 1,1-1,3 mm)

Interno / Inside- Fodera fissa in cotone / Fixed cotton lining

Comfort- Inserti in tessuto elasticizzato su giro manica / Elasticized fabric inserts on armhole

Plus- 2 tasche esterne, 1 interna / 2 outer pockets, 1 inside pocket

Simboli di lavaggio / Care symbols

codice - code

taglie - sizes

Protezioni / ProtectionsSaS-Tec® certificate secondo la norma EN 1621.1/97 / SaS-Tec® certified according to EN 1621.1/97Predisposto per l’inserimento del paraschiena G2 Wave (a parte cod. 981011400) / Fits G2 Wave back guard (sold separately, item 981011400)

rosso / red

nero / black

Giubbino in pelle / Leather jacketXS S M L XL XXL XXXL

2 3 4 5 6 7 8

Page 10: 9810211 perforata / perforated

leather 14

Company 14

98101910

Il giubbino in pelle Company 14, prodotto da Rev’it in esclusiva per Ducati, nasce dalla combinazione di pelli con finiture e colori in puro stile Ducati. Il tocco fashion che dona la striscia di pelle Nubuk sul petto nella versione nero su nero è una soluzione ricercata e originale per un capo da moto. Equipaggiato con protezioni standard CE su spalle e gomiti e predisposto per l’inserimento del paraschiena G1 o G2, questo modello è disponibile sia in vestibilità maschile che femminile. Company 14 è un articolo di grande appeal, destinato sia al Ducatista esperto che ai nuovi appassionati ed è pensato per un uso urbano e per i passeggeri in cerca di un abbinamento di stile.

The Company 14 leather jacket is produced by Rev’it and features a combination of different leather textures and colors. A Nubuk leather stripe in the center chest of the black on black version of this jacket offers a fashion treatment not often seen in a riding garment. This jacket is equipped with standard CE shoulder and elbow armor and is pocketed to take a Dainese G1 and G2 Back protectors and does not have a pant to jacket connection. However this product will have a sure appeal to a wide variety of Ducatisti from new riders, those looking for a stylish second jacket and passengers looking for a companion style.

Materiali / MaterialsEsterno / Outside- Pelle bovina (spessore 1,1-1,3 mm) / Cowhide (thickness 1,1-1,3 mm)

Interno / Inside- Fodera fissa in cotone / Fixed cotton lining

Comfort- Inserti in tessuto elasticizzato su giro manica / Elasticized fabric inserts on armhole

Plus- 2 tasche esterne, 1 interna / 2 outer pockets, 1 inside pocket

Simboli di lavaggio / Care symbols

codice - code

taglie - sizes

Protezioni / ProtectionsProLife® certificate secondo la norma EN 1621.1/97 / ProLife® certified according to EN 1621.1/97Predisposto per l’inserimento del paraschiena G1 Wave (a parte cod. 981011300) / Fits G1 Wave back guard (sold separately, item 981011300)

Giubbino in pelle / Leather jacketXS S M L XL XXL

2 3 4 5 6 7

Page 11: 9810211 perforata / perforated

leather 15

Speed 10

9810006

Pantaloni ad alto contenuto tecnico progettati per l’abbinamento con i giubbini in pelle Ducati. Forme aggressive, ideali per una posizione di guida sportiva, e ampie fasce in tessuto elastico su polpacci, cavallo e interno cosce per la massima libertà di movimento. Sicurezza completa, grazie alle protezioni certificate CE rigide su ginocchia e tibie e agli slider ginocchia intercambiabili. Realizzati in pelle bovina scelta da 1,2 mm, i pantaloni Speed 10 resistono a lungo e senza segni di usura alla trazione e allo strappo e sono dotati di protezioni morbide fianchi e cerniera di unione che li rende compatibili con qualsiasi giubbino da moto Ducati.

A sport style leather pant that pairs perfectly with Ducati leather jackets. An aggressive cut best suited to a sport riding position, with rigid race grade CE certified armor in the knees and shins and replaceable knee sliders. Large stretch panels in the calf and inner thigh provide a secure and comfortable fit. Made from 1.2 mm thick top grain cowhide leather for maximum tensile strength and tear resistance, soft armor inserts protect the hips and a full length pant to jacket zipper securely connects any Ducati riding jacket.

Materiali / MaterialsEsterno / Outside- Pelle bovina Comfort (spessore mm 1,1 +/- 0,1) / Comfort cowhide(thickness 1,1 +/- 0,1 mm)

Interno / Inside- Fodera fissa / Fixed lining

Comfort- Pelle accoppiata ad elastico sulle ginocchia / Leather matched with elastic on knees

- Inserti in tessuto elastico sul cavallo / Elastic fabric inserts on crotch

Plus- 2 tasche esterne / 2 outer pockets- Cerniera di unione giubbino a pantaloni / Jacket-to-pants zipper

Simboli di lavaggio / Care symbols

codice - code

taglie - sizes

Protezioni / ProtectionsComposite termoformate certificate secondo la norma EN 1621.1/97 / In thermoformed composite material, pursuant to EN 1621.1/97Morbide certificate secondo la norma EN 1621.1/97 / Soft protectors, certified according to EN 1621.1/97

Pantaloni in pelle / Leather trousers48 50 52 54 56 58 60

48 50 52 54 56 58 60

Page 12: 9810211 perforata / perforated

Cam

paig

n o

rder o

nly

leather 16

Company

9810007

Pantaloni sportivi dal look essenziale ed elegante per chi vive la moto tutti i giorni, pensati per abbinarsi perfettamente a qualsiasi giubbino in pelle Ducati. Disponibili in versione uomo e donna, i pantaloni Company sono dotati di protezioni ginocchia removibili certificate CE e rinforzi morbidi nella zona fianchi. La pratica cerniera unione li assicura a qualsiasi giubbino Ducati dotato di zip.

Company is a clean simple cut street leather pant designed to complement any Ducati leather jacket in a perfect style for everyday street riding. Available in matching men’s and women’s styles, the Company leather pant is equipped with removable CE armor in the knees and soft armor in the hips. The full length pant to jacket zipper secures to any Ducati riding jacket.

Materiali / MaterialsEsterno / Outside- Pelle bovina Tutu (spessore mm 1,2 +/- 0,1) / Tutu cowhide (thickness 1,2 +/- 0,1 mm)

Interno / Inside- Fodera fissa sanityzed / Sanityzed fixed lining

Comfort- Inserti in tessuto elastico sul cavallo / Elastic fabric inserts on crotch

Plus- 2 tasche esterne / 2 outer pockets- Cerniera di unione giubbino a pantaloni / Jacket-to-pants zipper

Simboli di lavaggio / Care symbols

codice - code

taglie - sizes

Protezioni / ProtectionsComposite termoformate certificate secondo la norma EN 1621.1/97 / In thermoformed composite material, pursuant to EN 1621.1/97Morbide certificate secondo la norma EN 1621.1/97 / Soft protectors, certified according to EN 1621.1/97

Pantaloni in pelle / Leather trousers48 50 52 54 56 58 60

48 50 52 54 56 58 60

Page 13: 9810211 perforata / perforated

leather 17

Company

9810008

Pantaloni sportivi dal look essenziale ed elegante per chi vive la moto tutti i giorni, pensati per abbinarsi perfettamente a qualsiasi giubbino in pelle Ducati. Disponibili in versione uomo e donna, i pantaloni Company sono dotati di protezioni ginocchia removibili certificate CE e rinforzi morbidi nella zona fianchi. La pratica cerniera unione li assicura a qualsiasi giubbino Ducati dotato di zip.

Company is a clean simple cut street leather pant designed to complement any Ducati leather jacket in a perfect style for everyday street riding. Available in matching men’s and women’s styles, the Company leather pant is equipped with removable CE armor in the knees and soft armor in the hips. The full length pant to jacket zipper secures to any Ducati riding jacket.

Materiali / MaterialsEsterno / Outside- Pelle bovina (spessore 1,1-1,3 mm) / Cowhide (thickness 1,1-1,3 mm)

Interno / Inside- Fodera fissa sanityzed / Sanityzed fixed lining

Comfort- Inserti in tessuto elastico sul cavallo / Elastic fabric inserts on crotch

Plus- 2 tasche esterne / 2 outer pockets- Cerniera di unione giubbino a pantaloni / Jacket-to-pants zipper

Simboli di lavaggio / Care symbols

codice - code

taglie - sizes

Protezioni / ProtectionsComposite termoformate certificate secondo la norma EN 1621.1/97 / In thermoformed composite material, pursuant to EN 1621.1/97Morbide certificate secondo la norma EN 1621.1/97 / Soft protectors, certified according to EN 1621.1/97

Pantaloni in pelle / Leather trousers40 42 44 46 48 50

40 42 44 46 48 50