of 4 /4
 HPC’s super ior line of door g uards protects c ommercial and industr ial entrances. Constructed of heavy-gauge, cold rolled steel; HPC Door Guards furnish an extra level of security.  Narrow stile aluminum doors are found at the entrances to many commer cial and indust rial facilities, suc h as stores and factories. The cylinder is one of the more vulnerable parts of a narrow stile aluminum door.  Left unprotec ted, cylinders easily can be pulled o r twisted out , the door stile c an be drilled and the lock tripped open. Another common problem with narrow stile aluminum doors is an  attack at the d oor jamb.  An unprotect ed door is subject to a pry bar spreading the door and the jamb, or even ripping out the jamb, allowing unauthorized entry. Sawing the bolt also has been a means to gain unlawful entry.  HPC Door Guards protest against all of these attacks.  A primary res ponsibility of a p rofessional lo cksmith is to e nhance the secur ity of their customers’homes and businesses. HPC Door Guards do just that. The sales and installation of these door guards protect  your customers and can be a very p rofitable part of your business. 139 DOOR GUARDS D  O  O R  G  U A R D  S Latch/Bolt Guards ....................................141 Cylinder Guards .......................................142 High Security Door Guards......................143

6HPCdoor Guards

Embed Size (px)

Citation preview

Page 1: 6HPCdoor Guards

7/30/2019 6HPCdoor Guards

http://slidepdf.com/reader/full/6hpcdoor-guards 1/4

 HPC’s superior line of door guards protects commercial and industrial entrances.Constructed of 

heavy-gauge, cold rolled steel; HPC Door Guards furnish an extra level of security.

 Narrow stile aluminum doors are found at the entrances to many commercial and industrial facilities, such

as stores and factories. The cylinder is one of the more vulnerable parts of a narrow stile aluminum door.

 Left unprotected, cylinders easily can be pulled or twisted out , the door stile can be drilled and the lock 

tripped open. Another common problem with narrow stile aluminum doors is an attack at the door jamb. An unprotected door is subject to a pry bar spreading the door and the jamb, or even ripping out the jamb,

allowing unauthorized entry. Sawing the bolt also has been a means to gain unlawful entry. HPC Door

Guards protest against all of these attacks.

 A primary responsibility of a professional locksmith is to enhance the security of their customers’homes

and businesses. HPC Door Guards do just that. The sales and installation of these door guards protect

 your customers and can be a very profitable part of your business.

1

DOOR GUARDS

  

 

 

 

Latch/Bolt Guards ....................................141

Cylinder Guards .......................................142

High Security Door Guards......................143

Page 2: 6HPCdoor Guards

7/30/2019 6HPCdoor Guards

http://slidepdf.com/reader/full/6hpcdoor-guards 2/4

   D   O   O   R

   G   U   A   R   D   S

140 1

  

  

 

This cold rolled steel Guard Plate with a bright

nickel plating is screwed directly onto the edge

of the door. The flanges of the guards will keep any prying

tools away from the latch. Guard plates come complete with

all necessary hardware and illustrated instructions.

This Heavy-Duty Guard Plate is the strongest and

most popular guard plate. It is 14" (35.5cm) long and is

made from 2 pieces of cold rolled steel, welded together with

a baked matte bronze finish. This guard plate offers maximum

resistance to prying and forcing. It m ounts onto your door with

2 carriage bolts going through the door and is anchored with

a nut and cap nut on the inside. Four w ood screws go into the

edge of the door. Guard plates come complete with all

necessary hardware and illustrated instructions.

Offset Guard Plates are used on vestibule

doors with projecting door casings (for doors that

are not flush with the frame). These plates are easily

installed by drilling only 2 holes and using the pair of 

through bolts and nuts. The guards are made of cold rolled

steel and have a satin stainless finish. The 14" (35.5cm)

overall length extends 3" (7.6cm) beyond the average lock

face, protecting against unauthorized, forcible entry. There

are 4 sizes available. Guard plates come complete with all

necessary hardware and illustrated instructions.

No. VDG-10Heavy-Duty

Guard Plate

1.75"W x 14"H

(44 x 356mm)

No. OVDG-110.25" (6.35mm) offset

1.8"W x 14"H

(46 x 356mm)

No. OVDG-120.375" (9.53mm) offset

1.8"W x 14"H

(46 x 356mm)

No. OVDG-130.438" (11.11mm) offset

1.8"W x 14"H

(46 x 356mm)

No. OVDG-140.563" (14.29mm) offset

1.8"W x 14"H

(46 x 356mm)

No. ODG-63" (76mm)

Lock Face Opening

1.063"W x 5.625"H

(27 x 182mm)

Guard Plate

Heavy-Duty Guard Plate

Offset Guard Plate

3"

139

Cylinder Guards

The cylinder is one of the most

vulnerable parts of a narrow stile

aluminum door. Left unprotected,

cylinders can be easily twisted or 

pulled out. The plugs on these

cylinders can be pulled out, or 

the door stile can be drilled and

the lock tripped open. The entire

DorGard™ series will foil an

attack against all of these

vulnerable points.

Latch/Bolt Guards

 A must where complete security

is desired. These effective

barriers prevent any door 

openings by a knife, saw or 

celluloid strip. Many homes,

hotels, motels and store fronts

still have unguarded latches and

bolts. They are easy prey to

even an inexperienced burglar,

and need the protection of a

Latch/Bolt Guard.

Door Spreading

Narrow stile aluminum doors

present another area of 

vulnerability to forcible entry.

These unprotected doors are

subject to a pry bar spreading

the door from the jamb or 

separating a pair of doors.

The DorGard III™ solves this

particular problem.

1.73" OD x 1.165" ID

44 x 30mm

1.5" W x 4.5" H

38 x 114mm

CG1-AXC-EA

DG2-AXS-10

DG2-BXS-10

DG3-APD-10

DG3-APS-10

ODG-6

OVDG-11

OVDG-12

OVDG-13

OVDG-14

VDG-10

   L  a   t  c   h   /   B  o   l   t   G  u  a

  r   d

   O  v  e  r  a   l   l   S   i  z  e

   C  y   l   i  n   d  e  r   L  e  n  g   t   h

   D  o  u   b   l  e   D  o  o  r

   O  p  e  n   i  n  g   O  u   t

   D  o  o  r   N  o   t   F   l  u  s   h

   W   i   t   h   F  r  a  m  e

   M  a   t   t  e   B  r  o  n  z  e   F

   i  n   i  s   h

1.5" W x 4.5" H

38 x 114mm

3" W x 8.625" H

77 x 219mm

any

1"

25.4mm

1.125"

28.6mm

1"

25.4mm

lock face opening:

3" (76mm)

bright

nickelplating

1.063" W x 5.625" H

27 x 182mm

0.813" W x 14" H

46 x 356mm

1.75" W x 14" H44 x 356mm

offset:

0.25" (6.35mm)0.375" (9.53mm)

0.438" (11.11mm)

0.563" (14.29mm)

Cylinder and Latch Guards

   S   i  n  g   l  e   D  o  o  r

   S   t  o  c   k   N  u  m   b  e  r

   P  r  e  v  e  n   t  s   D  o  o  r

   S  p  r  e  a   d   i  n  g

   C  y   l   i  n   d  e  r   G  u  a  r   d

   O  p  e  n   i  n  g   I  n

   F   l  u  s   h   M  o  u  n   t

   T   h  r  o  u  g   h   B  o   l   t  s

   S  a   t   i  n   S   t  a   i  n   l  e  s  s

   S   t  e  e   l   F   i  n   i  s   h

Page 3: 6HPCdoor Guards

7/30/2019 6HPCdoor Guards

http://slidepdf.com/reader/full/6hpcdoor-guards 3/4

   D   O   O   R

   G   U   A   R   D   S

142 1

  

  

 

The DorGard II™ provides unsurpassed

protection for lock cylinders on narrow stile

aluminum doors. Using cast steel components, it

creates a “vault” around the cylinder, virtually eliminatingthe possibility of unauthorized entry by removal of the

cylinder or cylinder plug. The face plate is cast stainless

steel, protecting against all common drilling equipment.

The plug protector is made of case hardened steel. It

rotates freely in the face plate, protecting against forcible

removal of the plug. The DG2 is affixed with hardened

steel bolts through the door. The unique construction

provides easy installation and easy access (without

removing the door guard) for servicing the cylinder.

DorGard II™ can be used with any cylinders from 15/16"

to 1-3/8" (2.38 x 3.50cm) in length. Satin stainless finish.

DorGard II™ has been specified into the prints for banksin Canada and has become very popular in the United

States as well!

Comes supplied with a standard plug protector. Plug protectors

are also available for Schlage, Miwa, Dom and Abloy.Comes supplied with a standard plug protector. Plug protectors

are also available for Schlage, Miwa, Dom and Abloy.

No. DG2-BXS-101.5"W x 4.5"H

(38 x 114mm)

1.125" (28.6mm)

Standard Cylinder 

No. DG2-AXS-101.5"W x 4.5"H

(38 x 114mm)

1" (25.4mm)

Standard Cylinder No. DG2-AXS-10

DorGard II™

DorGard III™

HPC/Scotsman Door Guards

 A common problem with narrow stile aluminum doors is attack

at the door jamb. An unprotected door is subject to a pry bar 

spreading the door and the jamb, or even ripping out the jamb,

allowing unauthorized entry. Sawing the bolt has also been a

means to gain unlawful entry. DorGard III ™ will thwart all of 

these attempts, as well as guard the lock cylinder.

The DorGard III™ provides the same cylinder 

protection as the DorGard II™, plus it has the added

benefit of a latch protection plate. This hardened steel

plate becomes an integral part of the DorGard™ system. Cast in

one piece, with ribs on the back for added strength, the latch

plate has two pins that will rest in holes drilled into the door 

 jamb. This innovative pin feature adds another level of security

to the door by linking the door and the jamb together.

The DorGard III™ is the perfect choice for electric

strike applications; it adds security to the convenience of 

electric strikes. It completely conceals the area of the lock bolt

and strike, and blocks all access to the lock and cylinder.

The DG3 can be used with any cylinders from

15/16" to 1-3/8" (2.38 x 3.50cm) in length. The DorGard III™ 

is non-handed so that it can be used on right or left handed

doors. It is available in either a satin stainless or 

matte bronze finish, providing an extremely durable and

attractive finish. Mounting hardware and illustrated installationinstructions are included. The TK3 installation kit is strongly

suggested.

No. DG3-APD-103"W x 8.625"H (77.0 x 218.7mm)

1" (25.4mm) Standard Cylinder 

with Matte Bronze Finish

No. DG3-APS-103"W x 8.625"H (77.0 x 218.7mm)

1" (25.4mm) Standard Cylinder 

with Satin Stainless Finish

No. TK3Installation Kit for DorGard III™

(contains 1 drill jig and 2 jamb hole locators

and can be used for multiple installations.)

No. DG3-APS-10

The HPC/Scotsman CylGard™ is a case

hardened solid steel ring designed to guard

against forcible entry. It spins freely around the

cylinder, preventing the use of a wrench to break the

cylinder. It is available in a satin stainless finish,

providing an extremely durable and attractive look.

No. CG1-AXC-EA1.73" O.D. x 1.165" I.D.

(44 x 30mm)

HPC/Scotsman CylGard™

Page 4: 6HPCdoor Guards

7/30/2019 6HPCdoor Guards

http://slidepdf.com/reader/full/6hpcdoor-guards 4/4

   D   O   O   R

   G   U   A   R   D   S

144