4035 4WD / 5035 4WD

Specifi cations

ENGINECompression RatioCylindersDisplacementMax Engine HP (kW) @ rpmType ELECTRICAlternatorBattery CapacityCLUTCH

TypeTRANSMISSION

Number of GearsType

FRONT WHEEL DRIVETypeSTEERING

Steering Pump Output (l/min)TypeBRAKES

TypeHYDRAULIC SYSTEM

3-Point LinkageAuxiliary Remote Valves (one set standard)Lift CapacityPump Output (l/min)Type

PTOMax PTO HP (kW)PTO RPM @ Engine RPMTypeOPERATING WEIGHT

TotalDIMENSIONS

Overall LengthOverall WidthTurning RadiusTYRES

Ag (Front / Rear)Industrial (Front / Rear)

4035 4WD

19.5 : 131892 cc40.0 (29.8) @ 2800 rpmNaturally aspirated, direct injection, diesel engine

12 volt, 45 amps12 volt, 77 amp hours

Main – single plate dry; PTO – wet multidisc

12 forward, 12 reverseForward-reverse synchro shuttle with speed synchromesh & range constant mesh

Mechanical engagement

20.2Hydrostatic power

Wet disc

Category I, with telescopic lower link and stabiliserSingle spool double acting1402 kgs41.6Open centre, full-live hydraulic with position and draft controls

33 (24.27)540 @ 2404 rpmIndependent with electro-hydraulic engagement

1985 kgs

3147 mm1715 mm2946 min. mm

9.5x16 / 14.9x2412x16.5 / 16.9x24

5035 4WD

19.5 : 142523 cc49.5 (36.40) @ 2800 rpmNaturally aspirated, direct injection, diesel engine

12 volt, 45 amps12 volt, 77 amp hours

Main – single plate dry; PTO – wet multidisc

12 forward, 12 reverseForward-reverse synchro shuttle with speed synchromesh & range constant mesh

Mechanical engagement

20.2Hydrostatic power

Wet disc

Category I, with telescopic lower link and stabiliserSingle spool double acting1402 kgs41.6Open centre, full-live hydraulic with position and draft controls

43 (32.6)540 @ 2404 rpmIndependent with electro-hydraulic engagement

2100 kgs

3274 mm1915 mm3150 min. mm

9.5x20 / 16.9x2812x16.5 / 16.9x24

HIGH LIFT HYDRAULICSThe live powerful hydraulics boast a lift capacity of 1400 kgs to handle the heaviest of implements. The standard draft control feature adds to the ease of operation when using ground engaging implements.

Heavy and sturdy 3-point linkage is employed to ensure stability and safety. The lateral stabilisers and lower links with telescopic ball ends are designed for safe and easy coupling of implements.

HIGHLY COMFORTABLE OPERATOR ENVIRONMENTThese tractors come standard with a list of deluxe features that offer supreme comfort and ease of operation to the operator. The fully fl at operator deck is covered with a rubber mat, side shift gear controls, the suspended brake and clutch pedals provide lots of legroom and a roomy work area. The deluxe seat features wide formed cushions, adjustable suspension and armrests. Coupled with the tiltable steering column, the operator can select the best suited driving position, just what’s needed for those long hauls.

Spec

ifi ca

tion

and

desi

gn s

ubje

ct to

cha

nge

with

out n

otic

e.

3 Y E A R W A R R A N T Y*

4035 4WD / 5035 4WD

35–4WD Series Tractors

Compare these Mahindra models for: • Its deluxe features, roomy and uncluttered fl at platform • Synchro-shuttle transmission • Number of transmission speeds and full synchromesh gear shift • Electro-hydraulic PTO engagement • Overall tractor weight • Loader Lift Capacity

*3 Year Engine & Powertrain Warranty.See dealer for details.

Mahindra & Mahindra Ltd 4 / 20 Buttonwood PlaceWillawong QLD 4110 AustraliaPhone: +61 7 3213 1211 Fax: +61 7 3213 1215Toll Free: 1800 45 95 75 (within Australia) www.mahindra.com.au/www.mahindra.co.nz

• Electro-hydraulic PTO engagement • Overall tractor weight • Loader Lift Capacity

Superior Performance Sporting a super-stylish exterior and featuring a strong construction, these compact 4WD workhorses are designed to offer the ultimate in performance, comfort and versatility.

Their sleek and modern design with sloping hood and rounded fenders provide an outstanding all-round visibility. The roomy and uncluttered fully-fl at operator platform makes for easy entry and exit. The ergonomically positioned controls provide maximum operator comfort and ease of operation.

The compact design adds to the versatility by providing enhanced maneuverability while full-size performance is achieved by offering a heavy-duty chassis that makes these tractors one of the heaviest and most rugged in their class.

DEPENDABLE ENGINEThe dependable, naturally aspirated Mahindra engine delivers reliable power and plenty of torque. With an impressive 40 HP in 4035 4WD and 50 HP in 5035 4WD the engine offers ample strength and traction needed during those tough, draft and PTO Jobs. The effi cient combustion produces more horsepower per litre of fuel. It also produces cleaner emissions and conforms to EPA Tier IV norms.

HEAVY DUTY FRONT AXLEThe heavy-duty front axle ensures maximum reliability in loader and fi eld operations.

The bevel gear front axle with a responsive hydrostatic steering provides a tight steering angle, so getting in and out of confi ned areas is easy.

EASY SHIFT TRANSMISSIONThe synchromesh transmission provides smooth

shifting on the move. The standard 12 forward

and 12 reverse speeds maximize performance

with a choice of speeds. The dedicated left hand

synchronised reverser provides smooth control

for maximum productivity during intensive loader

and headland operations.

The PTO is engaged electro-hydraulically and

has oil immersed multi-disc friction plates for a

long lasting performance. To allow for a safer

operation, when operating in the auto mode,

the PTO automatically stops when the position

control lever is moved to the raise position,

eliminating the risk of injury from the rotating

blades of the raised implement.

The Mahindra MBHSeries of BackhoesMain features:

• The sub-frame mounting system mounts to the center and rear end of tractor. This 4-point mounting system protects the tractor and still allows fast, easy installation and removal of backhoe.

• Backhoe valve is positioned low to operator. This allows less heat and noise to be transferred into operator’s area.

• Dedicated hydraulic valve with dual plus axis levers.

• Heavy duty swing frame.

• Hydraulic fl ow used from the tractor pump.

• Optional bucket sizes.

The Mahindra ML Series of LoadersMain features:

• Rugged mainframe with durable boom structure mounted rigidly across chassis.

• Self Level DesignThe linkages on the loader maintain the bucket in horizontal position,just by operating the boom, offering safe work performance.

• Quick Hitch DesignSwitching from buckets to pallet forks, bale spikes etc. is easier and quicker.

• Quick Attach DesignThe loader can be easily installed and removed with just two pins.

LOA

DER

SPEC

IFIC

ATIO

NS LOADER MODEL

TRACTOR MODEL APPLICABLEMaximum Lift HeightClearance with Attachment LevelClearance with Attachment DumpedReach at Maximum HeightMaximum Dump AngleReach with Attachment on GroundAttachment Rollback AngleDigging Depth Below GradeOverall Height in Carry PositionDepth of Attachment (to back of inner shell)Height of AttachmentDepth of Attachment (to pivot pin)Lift Capacity to Full Height at Pivot PinsBreakout Force at Ground Level, Pivot PinsRelief Valve Setting (Loader Control Valve)Rated Flow (Tractor System)Attachment width used for specifi cationBucket capacityHydraulic System Bucket Level indicator OPTIONAL ATTACHMENTS (for all models)

ML4404035-4WD

2730 mm 2430 mm1956 mm530 mm

60°1880 mm

47°180 mm

1550 mm591 mm581 mm801 mm1089 kgf2364 kgf

180 kg/cm2

41.6 L/min1828 mm0.33 cu.m

ML4505035-4WD

2772 mm 2484 mm1956 mm556 mm

60°1880 mm

47°180 mm

1550 mm591 mm581 mm801 mm1089 kgf2364 kgf

180 kg/cm2

41.6 L/min1828 mm0.33 cu.m

BACK

HOE

SPEC

IFIC

ATIO

NS BACKHOE MODEL

TRACTOR MODEL APPLICABLEDigging Depth (to foot fl at bottom)Reach from centre line of swing pivotLoading Height (bucket at 60º)Max. Leveling AngleSwing ArcTransport Height (max)Transport OverhangBucket RotationStabiliser Spread (down position)Stabiliser Spread (up position)Angle of departureTyre size consideredShipping weightBucket Digging ForceDipperstick Digging ForceOperating PressureStandard Bucket SizesOptional Bucket Sizes

MBH354035-4WD

1940 mm2875 mm 1615 mm

10º180º

1960 mm1105 mm

180º 1745 mm1180 mm

21º9.5x16 / 14.9x24

470 kg1278 kgf793 kgf170 bar

9” 12” and 18”

MBH655035-4WD

2400 mm3460 mm2040 mm

10º180º

2360 mm1280 mm

180º 1745 mm1180 mm

21º11.2x24 / 16.9x30

500 kg1700 kgf1000 kgf170 bar

12” 18” and 24”

4035 4WD / 5035 4WD

35–4WD Series Tractors4035 4WD / 5035 4WD

35–4WD Series Tractors

DESIGNED TO BE FITTED ONLY IN COMBINATION OF MAHINDRA OFFERED LOADERS

Quality is paramount at Mahindra and we are proud to be the fi rst and only tractor manufacturing company in the world to win the Japan Quality Medal (JQM), a laurel truly hard to earn. It is universally acclaimed as the highest award presented to a company following Total Quality Management (TQM) practices in their entire business operations. JQM recognizes a high level of customer focus, improvements in overall quality and excellence in business processes.

Also, Mahindra was the fi rst tractor company worldwide to win the Deming Application Prize in 2003 for excellence in quality, making it the only tractor manufacturer to receive both distinctions.

Proven Quality – JAPAN QUALITY MEDAL WINNER

JAPANQUALITYMEDALWINNER

• The sub-frame mounting system mounts to the center and rear end of tractor. This 4-point mounting system protects the tractor and still allows fast, easy installation and removal of backhoe.

less heat and noise to be transferred into operator’s area.

Tractor pump with loader control valveStandard

Grill guard, bale spikes, pallet forks and 4-in-1 buckets

The Mahindra ML Series of LoadersMain features:

• Rugged mainframe with durable boom structure mounted rigidly across chassis.

• Self Level DesignThe linkages on the loader maintain the bucket in horizontal position,just by operating the boom, offering safe work performance.

• Quick Hitch DesignSwitching from buckets to pallet forks, bale spikes etc. is easier and quicker.

• Quick Attach DesignThe loader can be easily installed and removed with just two pins.