Articles 4 Common Product Mistakes When Buying from Asia

Getting into the import business is not a joke at all. You have to invest your time and your effort in

order for you to succeed in this field. This is mainly the reason why committing mistake in this

business must be avoided with utmost consideration. To help you save yourself in wasting money and

time, we have here the list of the frequently committed mistakes in line with buying products from

Asia.

1. Not Being Able to Check the Supplier’s Product Before Working with Them

They say that there are only two kinds of product suppliers; the good and the bad. However, in

principle, there are three kinds of them. They are the good, the bad and the good yet

technically not qualified to bring the demands of your project or your business.

A supplier may be good in delivering your orders on time. But this does not mean that they

deliver quality products that meet the needed specifications. There are suppliers who can

offer products at much lower price. This means that the supplier is great with the things they

specifically do but is not yet great for what you asked for.

2. Getting the Supplier to Fill into the Missing Specification Details on Your Behalf

Due to lack of time on our part, we often tend to have our suppliers fill in the missing parts of

our orders. In most cases, we simply send file of what we wish to have from them without the

detailed information of what we truly need. This often results to failure as suppliers are

product development agencies and NOT merely manufacturers who can set specifications of

the products.

In this regard, we must carefully list all of what we want from them such as the following:

a. The specific design of the craft we are ordering. This means that we need to set the parts,

label, per piece dimension and print areas. These specifications apply to clothing products.

b. The product materials. We have to indicate whether we want clothing that is made from

100% Oxford fabric or we want other type of clothing.

c. The specific component of the product such as the kind of zipper to use.

d. The graphical representation of specifications such as washing label and embroideries.

3. Giving the Supplier the Specific Design that They Simply Cannot Meet

This is often a conflict between what we want and what the chosen supplier can actually give

us. It would be useless to set the specifications when we know our supplier can deliver them.

As such we need to have a clear understanding and arrangement with the supplier in line with

this matter.

If the supplier cannot attend to your needs, you have to talk with them to see what

adjustments are needed or that they can offer alternatives that could at least substitute to

your first choice.

4. Relying to Only One Supplier at Once

As mentioned earlier, import business is not a joke. Thus, you have to be sure in whatever you

do with your business. Choosing a supplier is not too far from this. We often tend to transact

with the first supplier we have talked with. With this, checking on several suppliers could help

us a lot in avoiding the mistake of being into a supplier who we’ll soon find to have not met

our expectations.

How to Import can help you understand more about what you need to do to avoid the common

mistakes. They are holding events and seminars regarding this. Check their site to know more about

this. http://how-to-import.com.au/