6
3rd Generation Series For the most demanding off-road machinery applications No Compromises Increased Power Reduced Emissions Improved Fuel Economy

3rd Generation Series

Embed Size (px)

Citation preview

Page 1: 3rd Generation Series

3rd Generation SeriesFor the most demanding off-road machinery applications

No Compromises

Increased Power Reduced Emissions Improved Fuel Economy

Page 2: 3rd Generation Series

AGCO SISU POWER’s new 3-, 4-, 6- and 7-cylinder 3rd Generation

Series engines are designed for demanding off-road machinery

applications. Robust construction, durability, reliability and strong

torque have made AGCO SISU POWER engines respected throughout

the world. Most importantly, the new 3rd Generation Series has been

developed to be the most economic off-road diesel engine in the world.

The new 3rd Generation Series engine reduces emissions without

sacrifi cing fuel economy and its design is at home in many

off-road applications, including tractors, combines and

industrial equipment.

Increased power density – reduced emissions

The 3rd Generation Series engines fulfi ll the emission requirements of Stage IIIA (EU) and EPA Tier III (USA). High injection pressure, precise electronic injection timing and effective charge air cooling are the major factors in emission control. The solutions used for reducing emissions have simultaneously enabled the increase of power density and torque level while maintaining good fuel economy.

Engine response faster than ever

Thanks to the new design solutions, 3rd Generation Series engines are fast in response. The state-of-the-art electronic control, high pressure fuel injection and turbo-charger enable the engine to react without delay in changing load conditions.

State-of-the-art engine technology that delivers performance and durability

developed to be the most economic off-road diesel engine in the world.

The new 3rd Generation Series engine reduces emissions without

sacrifi cing fuel economy and its design is at home in many

off-road applications, including tractors, combines and

Increased power density – reduced emissions

The 3rd Generation Series engines fulfi ll the emission requirements of Stage IIIA (EU) and EPA Tier III (USA). High injection pressure, precise electronic injection timing and effective charge air cooling are the major factors in emission control. The solutions used for reducing emissions have simultaneously enabled the increase of power density and torque level while maintaining good fuel economy.

Engine response faster than ever

Thanks to the new design solutions, 3rd Generation Series engines are fast in response. The state-of-the-art electronic control, high pressure fuel injection and turbo-charger enable the engine to react without delay in changing load conditions.

3rd Generation Series

Page 3: 3rd Generation Series

Unbeatable torque at low engine speedThe unsurpassed torque characteristics of 3rd Generation Series

engines have been further strengthened in order to meet the

increasing requirements of advanced off-road machinery. Torque

is high and rise is rapid. Torque also remains high with lower

engine speeds. As a result, the work proceeds effi ciently

while fuel is saved. Since torque level and power are

specifi ed and set according to requirements of the machine

application, machine performance is fully optimized.

AGCO SISU POWER 3rd Generation Series engines have durability, robust construction, and reliability.

AGCO SISU POWER 3rd Generation Series

Brands who rely on AGCO SISU POWER CHALLENGER : FENDT : MASSEY FERGUSON : AJ POWER : KALMAR : KONECRANES : LOGMAN : LOGSET : LAVERDA : VALTRA

0 50 100 150 200 250 300 350 400 450 500

98

84

74

66

49

44

33

7

6

6

6

4

4

3

9,8

8,4

7,4

6,6

4,9

4,4

3,3

TYPE CYL LITER

Tier III / Stage 3A Power Ratings

8006004002000 1000 1200 1400 1600 1800 2000

GROSS POWER Hp TORQUE Nm

Unbeatable torque at low engine speedThe unsurpassed torque characteristics of 3rd Generation Series

engines have been further strengthened in order to meet the

increasing requirements of advanced off-road machinery. Torque

is high and rise is rapid. Torque also remains high with lower

engine speeds. As a result, the work proceeds effi ciently

while fuel is saved. Since torque level and power are

specifi ed and set according to requirements of the machine

application, machine performance is fully optimized.

engines have durability,

Page 4: 3rd Generation Series

High reliability – ease of maintenance

AGCO SISU POWER’s renowned durability includes wet cylinder liners and charge air cooling for a long

service life and reduced operation cost.

The whole fuel system is located on the cool side of the engine. Fuel fi lters

are easily accessible for quick replacement without tools or spilling due to slip-ring fi tting design. All service points are easily accessed for streamlined

service. Electronic maintenance controls extend fi lter change

intervals when good quality fuel is used.

Reduced noise Combustion noise has been reduced

by the use of pilot injection. The rise of fi ring pressure is slow and does not produce

typical diesel engine noise levels. The sound of combustion is smooth and frequency is pleasantly

low. The new gear design and profi le of timing gears also reduce mechanical noise. Enjoy a comfortable

working environment in the cabin.

Cylinder liner with mid-support

The 3rd Generation Series engine features mid-cylinder liner support design. This type of design:

• REDUCES liner vibrations in order to nearly eliminate cavitation corrosion

• MINIMIZES wear of cylinder liners and piston rings, resulting in long service life

• LOWERS oil consumption, among the lowest in engines of this power range.

Engine for frameless tractor designThe robust engine construction is suited for the load bearing member of the tractor frame without requiring a separate engine frame. Dimensions match the 2nd Generation Series, making re-installation uncomplicated.

Pilot Injection reduces combustion noise, lower than typical diesel engines.

Engine Type

Length MM

Height MM

WidthMM

Dry Weight KG

33 765 750 550 330

44 902 887 620 390

66 1190 997 600 590

74 1190 997 600 600

84 1250 1060 640 690

98 1450 1060 640 790

AGCO SISU POWER 3rd Generation Series

CHALLENGER : FENDT : MASSEY FERGUSON : AJ POWER : KALMAR : KONECRANES : LOGMAN : LOGSET : LAVERDA : VALTRA

cylinder liners and charge air cooling for a long service life and reduced operation cost.

The whole fuel system is located on the cool side of the engine. Fuel fi lters

are easily accessible for quick replacement without tools or spilling due to slip-ring fi tting design. All service points are easily accessed for streamlined

service. Electronic maintenance controls extend fi lter change

intervals when good quality fuel is used.

Reduced noise Combustion noise has been reduced

by the use of pilot injection. The rise of fi ring pressure is slow and does not produce

typical diesel engine noise levels. The sound of combustion is smooth and frequency is pleasantly

low. The new gear design and profi le of timing gears also reduce mechanical noise. Enjoy a comfortable

working environment in the cabin.

Page 5: 3rd Generation Series

3rd generation engine control

AGCO SISU POWER 3rd Generation Series engines feature 3rd generation control electronics that enhance and extend the proven technology behind the Fortius series engines. New or improved features include:

+ Injection process – The whole injection process is completely controlled by the ECU. Injection timing is automatically optimized according to operation conditions.

+ Multi-power and multi-governor performance – Static and dynamic properties are optimized into the EEM3 control system using CAN bus technology to achieve highest performance and effi ciency.

+ Cruise control functions – Functions are controllable for both travel speed and for PTO shaft speed. Maximum speeds can be set via the CAN bus connection.

+ Warning systems – Engine protection warnings are integral to the control system.

+ OnBoard control – Enjoy continuous control of the engine during operation. Common Rail pressure and cylinder functions are monitored continuously.

+ Service displays – Maintenance messages are displayed in order to optimize scheduled service and performance. The serial number and other engine information is also electronically displayed to simplify service.

+ CAN bus compatible – Communication via CAN bus simplifi es engine upgrades from 2nd Generation to 3rd Generation AGCO SISU POWER engines.

+ Fuel monitoring – Real-time monitoring of fuel consumption and load optimizes power transmission, engine effi ciency and economy.

+ Cold weather – 3rd Generation Series engines automatically com-pensate for fuel temperature when starting or running when cold.

+ Shut-down log – Every engine shut-down is monitored and recorded to facilitate problem solving and service.

+ Virtual engine – An electronic simulation model of the 3rd Generation Series engine is available for development of custom vehicle control systems.

Filter

Temp.-sensor

Temp.-sensor

Exhaustgas sensor

Actuators

AdBlue-DM

SCR-cat

Supply moduleDNOX2

AdBlue tank

AdBluequalitysensor

AdBluelevelsensor

Temp. sensor

DosingcontrolunitDCU

Sensors

Engine CAN

Diagnostic CAN

The 3rd Generation Series design is at home in many applications, including tractors, combines and industrial equipment.

AGCO SISU POWER

3rd Generation Series

engines have proven

power, unsurpassed

torque and improved

fuel economy.

Energy, Economy, and EcologyAGCO SISU POWER’s e3 Selective Catalytic Reduction (SCR) technology sets new standards in environmental effi ciency and engine

performance. This after-treatment system together with the SisuTronic electronic engine management system offers a signifi -cant improvement in fuel economy and emission control – without compromising engine power, torque characteristics or throttle response. SCR will be the base technology for the 4th Generation engine series, as well.

CHALLENGER : FENDT : MASSEY FERGUSON : AJ POWER : KALMAR : KONECRANES : LOGMAN : LOGSET : LAVERDA : VALTRA

Page 6: 3rd Generation Series

©2008 AGCO Corporation. All rights reserved.

3rd Generation Series

AGCO SISU POWERFI-37240 Linnavuori, NokiaFINLAND

TEL: +358 3 3417 111

FAX: +358 3 3417 330

EMAIL: [email protected]

WEB: www.agcosisupower.com

No Compromises

Increased Power Reduced Emissions Improved Fuel Economy