2017 ACCESSORY PRODUCTS CATALOG - Husker … · 2017 accessory products catalog pg 3 table of contents 110v engine heaters

Call 402.463.1531 / 800.752.0888 for sales and service

2017 ACCESSORY PRODUCTS CATALOG

PG 2 HUSKER POWER PRODUCTS

RETURN GOODS POLICY

RETURN MERCHANDISE: An RMA# (Return Goods Merchandise Number) must accompany any items being returned, along with a copy of the original invoice. You will need to call and talk to someone in the Parts Dept. They will be able to tell you what information will be needed to return your item. They will then issue a RMA#. We have, in the past, received packages from UPS with no invoice or information on why an item is being returned. If this occurs we will issue an additional 10% restocking fee along with the normal 20% restocking charge. In our busier season, it’s easy for these boxes to be set aside and not be taken care of properly; hopefully, this will save any problems with issuing credits and starting warranty claims. Remember, shipping labels need to have the RMA# on it.

Merchandise shipped and billed over 30 days will not normally be accepted for return.

The credit will be applied to your account, unless previous arrangements have been made.

RESTOCKING CHARGES: Merchandise returned will be charged a 20% restocking fee, with the exception of special order items. Some vendors charge us more than 20% and we will have to charge our valued customers accordingly. We have a simple Return Policy, if a RMA# is not issued before you return the goods an additional 10% will be added to the normal 20% fee.

SPECIAL ORDER ITEMS: A 20% deposit will be required at the time of ordering. The order will not be placed with our vendor until we have received the deposit. This policy will be waived if you have an account in good standing with us. Non-stock items going back to our vendor will be subject to both restock charge and return freight charges.

All returns are handled on a case by case review.

Thank you for your cooperation and we look forward to doing business with you this year.

PG 32017 ACCESSORY PRODUCTS CATALOG

TABLE OF CONTENTS110V Engine Heaters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34BLU RIVER Heat Exchangers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Certified Gas Engine Carburetion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Dripper Regulators & Oil Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Drive Line & Companion Flange Specs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Drive Plate, Auxiliary Pulley & Flex Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Driveshaft Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Driveshafts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Engine & Gearhead Companion Flanges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Engine Oil Drain Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Engine Radiators & Cooling Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28Engine Shelters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39Engine Trailers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Exhaust Primers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Gear Reduction Clutch Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Industrial Certified Gas Engines Plug Wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Industrial Gas Engine Exhaust Manifolds/Headers . . . . . . . . . . . . . . . . . . . . . . . 30Industrial Gas Engine Plug Wires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Intake & Exhaust System Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31LIMA MAC Irrigation Generators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Manifold Primer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Murphy Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10Murphy Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40NACD Clutch Kit Breakdown. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-25Power Take-Off Clutches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Tachometers and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Throttle Cables & Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Vibra-Damp Resilient Driveshafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

800.752.0888CALL

for pricing and availability

of items not listed


MURPHY PRODUCTS

PART # DESCRIPTION LIST PRICEL129 Oil Level Gauge $105.25

LM500-TF Lube Level Maintainer CALL

803952A L129 Gaskets $5.00

15000480 L129 Glass & Gasket Kit (replaces Plexiglas style) $35.50

15000485 L129 Glass & Gasket Kit $22.75

L150 Water Level Gauge (Repair Kit not avail. replace w/ new) $75.75

15000107 PS Fitting; 1/4 Tube $31.00

15010167 PS Fitting; 1/4 Hose Barb $43.50

15050910 Case, Body Gasket L150 $4.00

SV12 Fuel Solenoid $81.25

SV12-HP Fuel Solenoid (High Pressure) $104.00

SV24 Fuel Solenoid (24 Volt) $81.25

55010141 Coil Only (SV12) $67.75

55010145 Coil Only (SV24) $67.75

CKV2336 Check Valve $34.25

RP2307B Solenoid, 12V $64.75

RP2308B Solenoid, 24V $64.75

RP2309B Solenoid, 12V (14# Pull) $89.50

RP75-12 Rack Puller, 12V, 4FT $503.00

117 Magnetic Switch, 12-24V $37.00

117PH Magnetic Switch, 12-24V $37.00

MS2100 Magnetic Switch $40.50



518APH12V Magnetic Switch, 12V $47.00

518APH24V Magnetic Switch, 24V $47.00

782-1074 Fuse For 117/518’s $1.25

25050547 Dust Boot for Magnetic Switch $6.00

/518PH-12

2017 ACCESSORY PRODUCTS CATALOG PG 5

MURPHY PRODUCTSCON’T

PART # DESCRIPTION LIST PRICE20V2 Vacuum Gauge $61.50

20V3 Vacuum Gauge $59.50

20P-15 Pressure Gauge 0-15 $41.75






20P7-15 Pressure Gauge, w/ Lock Out $52.00






20P7-100-HL Pressure Gauge, w/ Lock Out & High-Low

$83.50

20P-75-FS Pressure Gauge, w/ Lock Out & Fail Safe $46.50

20P-100-FS Pressure Gauge, w/ Lock Out & Fail Safe $45.50

PSO421 Pressure Switch $34.75

AT03069 Auto Throttler CALL

OPLC-A-100 100 Pressure Switch Gauge CALL

OPLC-A-200 200 Pressure Switch Gauge CALL

60-0-60 Amp Meter $29.00

VM 12 Volt Meter (12 Volts) $28.75

VM 24 Volt Meter (24 Volts) $41.50

VM600 Volt Meter (600 Volts) $28.50

PB128S Stop Button $7.75

65010258 Start-Run Toggle Switch $14.75

65010082 Diode w/ Pigtail $13.25

65000362 Diode w/ Male Spade $29.50

65010123 Terminal Strip (4 Posts) CALL

\ 20V3


MURPHY PRODUCTSCON’T

PART # DESCRIPTION LIST PRICE20T-250-4 Water Temp Gauge, 4 ft $51.25

20T-250-6 Water Temp Gauge, 6 ft $52.50

20TJD-250-6 John Deere Water Temp Gauge, 6 ft $85.25




20TH-320-4-M10 Air Temp Gauge, 4 ft (160-320) $71.50

20TH-320-6-M10 Air Temp Gauge, 6 ft (160-320) $73.00

20SD-250-1/4 Water Temp Gauge, Direct Mount 1/4” $85.00

20SD-250-1/2 Water Temp Gauge, Direct Mount 1/2” $78.25

20T-250-4-FS Water Temp Gauge, 4 ft w/ Fail Safe $69.50

20T-250-6-FS Water Temp Gauge, 6 ft w/ Fail Safe $70.75

12T Timer with Case CALL

12T Less Case Timer, 12V Less Case CALL

24T Timer, 24V CALL

24T Less Case Timer, 24V Less Case CALL

65000249 Banjo Fitting (Fuel) (14MM x 1/4NPT Female) $55.00

\WD300LV

2 Gauge Panel-less Valve (SV12) \20T SERIES


MURPHY PRODUCTSELECTRIC & VOLTAGE GAUGES / HOUR METERS

PART # DESCRIPTION LIST PRICEEGS21P-100-12 Pressure Switch Gauge 12V $72.50

EGS21P-100-24 Pressure Switch Gauge 24V $86.50

EG21P-100-12 Pressure Gauge 12V $36.25

ESP-100 Sending Unit for Above Gauges $37.25

EGS21T-250-12 Temp Switchgauge 12V $72.50

EGS21T-250-24 Temp Switchgauge 24V $83.75

EST250/300-X** Sending Unit for Above Gauges $22.25

MUST ALSO PURCHASE APPROPRIATE TEMP ADAPTER**

10002444 Temp Gauge Adapter (16M x 1.5”) $7.25

10050069 Temp Gauge Adapter (3/8” NPT) $5.75

10002442 Temp Gauge Adapter (14M X 1.5) $6.75




VOLTAGE GAUGES

60-0-60 Amp Meter $29.00

MT90 Tach, Digital (Mag & Alternator P.U.) $306.00

VM 12 12 Volt Meter $28.75

VM 24 24 Volt Meter $41.50

VM600 600 Volt Meter $28.50

HOUR METERS

SM10010 Hour Meter $29.00

41789-00 Bracket Hour Meter (SM10010) $15.00

HP2-05-09 Hour Meter (use dampner below) $32.25

HP2-05-13 Dampner for HP2-05-09 $18.00

SM10002 Rectangular Hour Meter $36.00

/EG SERIES


MURPHY PRODUCTS32090485 - TIER III PANEL BUILD OF MATERIAL

800.752.0888CALL

for pricing and availability of items not listed

PLEASE NOTEPricing & Parts info on the

following page


ITEM # DESCRIPTION PART # QTY. LIST PRICENot Shown Isuzu PowerView 5Y3-091 1 $466.00

2 Magnetic Switch 12V 518APH12V Voltage Specific $47.00

2 Magnetic Switch 24V 518APH24V Voltage Specific $47.00

3 Key Switch w/ key 65700148 1 $30.75

Key for 65700148 & 778 switch

65000460 1 $13.00

5 Potentiometer (12V or 24V) 36999967 1 $36.00

Knob for Potentiometer PKT70B 1 $3.50

6 Toggle Switch TS 2 $6.80

7 Bulb 12V 00000029 Voltage Specific (2) $3.00 / ea

7 Bulb 24V 00001820 Voltage Specific (2) $2.25 / ea

7 Lamp Holder 00000749 2 $14.75 / ea

8 Red Lens 00000750 1 $4.25

9 Amber Lens 00002385 1 $4.25

10 Relay 12V 75111 Voltage Specific (4) $5.50 / ea

10 Relay 24V 75025 Voltage Specific (4) $18.00 / ea

10 Relay Socket 75280 4 $2.00 / ea

15 Fuse, Blade type 20A 782-1110 1 $1.00

16 Fuse, Blade type 30A 782-1112 3 $1.00 / ea

17 Fuse Holder 00000933 2 $10.50 / ea

18 Fuse, Glass AGC10 782-1051 3 $0.75 / ea

23 4 Position Fuse Block 00030870 1 $54.25

28 Starter Cut Relay 95J200E 1 $7.55

11 Terminal Block 65010125 1 $33.50

Diode 65010082 1 $13.25

Panel Wiring Harness 78000693 1 $1,170..00

Shock Mounts CM x 1/2 4 $6.50 / ea

Resistor, Potentiometer 2711121 $1.00 / ea


PART # DESCRIPTION LIST PRICEGENERAL PURPOSE ENGINE PANELS

WHB 3 Gauge Panel (Oil, Temp, Amp & 117) $207.50

WD300LV 2 Gauge Panel-less Valve (SV12) $208.00

GAS ENGINE PANELS

30090265 Panel 4 Gauge (Non-Cert Engine) (Includes Amp, Oil, Temp, Vacuum) $295.00

39300105 Black Certified Engine Panel (Controls Inc. style) use CM x 3/4 mounts $960.00

40350399 Murphy ML1000 Panel (standard on all certified gas engines starting in 2016)

$1,150.00

DIESEL ENGINE PANELS

30350524 Deluxe 3 Gauge Panel (Diesel) (less hour meter & starter button) $305.00

30350646 Loaded Enclosed Panel (Diesel) (temp/oil/117/amp/hour/start button) $690.00

HP2-05-28 Blank Enclosed Panel $350.00

40350399 Murphy ML1000 Panel (This is the panel in TPI1651 option on engine order sheet)

$1,150.00

32090485 Murphy Tier III Panel (does not include power view) See page 9 for breakdown of panel.

$1,400.00

PANEL PIECES

HP2-05-03 Start Button Diesel w/ Rubber Cover $8.75

SWX1240 Start Button, Non-Certified Gas Engine $5.00

9506023BX Key Switch w/ Keys for 39300105 Panel only $50.00

83451601 Key Only, For 39300105 Panel or 9506023BX Switch $10.00

31101BX Harness Key Switch, for 39300105 Panel $30.00

65700148 Key Switch w/ Keys for 40350399 Panel (ML1000 Panel) $30.75

65000460 Key, Set of 2, for 40350399 Panel (ML1000) or 65700148 Switch $13.00

40350397 Controller, MPC-10 for 40350399 Panels $499.00

HP2-50-150 Harness, IO for 32090485 Panel $82.00

32000194 Harness, Panel to engine for 32090485 $225.00

65000149 ISO Mount For 32090485 $6.25

CM X 3/4 ISO Mount for All other Panels $5.75

1410-000 Circuit board & Display for 39300105 (Special Order Only) $880.00

MURPHY PRODUCTSPANELS & PANEL PIECES


TACHOMETERS AND ACCESSORIES

PART NUMBER DESCRIPTION LIST PRICE

TACHOMETERS

103656 Alternator P.U. 0-3000 RPM $155.00

103678 Tachometer/Hour Meter Combo, Alternator P.U. 0-3000 RPM

$215.00

103736 Magnetic P.U. 0-4000 RPM $130.00

103757 Tachometer/Hour Meter Combo, Magnetic P.U. 0-3000 RPM

$225.00

TC9755 Distributor P.U. 0-6000 RPM $58.00

TC9133 Tachometer/Hour Meter Combo, Distributor P.U. 0-6000 RPM

$91.00

R8597 Mechanical P.U. 5:1 Ratio, 0-3500 RPM $125.00

R8599 Tachometer/Hour Meter Combo, Mechanical P.U., 5:1 Ratio

$138.00

82682 Hand Tach. $250.00

50446D004 Voltage Reducer 12/24 Volt $15.00

TACHOMETER KITS

5Y4-006 Magnetic P.U. Tachometer and Sensor (3/4” x 2.6”)

$215.00

TACHOMETER PICK-UPS

71544-00 Magnetic Sensor, 5/8” x 1.9” $76.00

HP2-55-07 Magnetic Sensor, 3/4” x 2.6” $55.00

17200 Magnetic Sensor, 3/8” x 2.75” $105.00

MOUNTING PLATES

5757323 Tachometer Mounting Bracket $7.00

/TC9755

Distributor P.U. 0-6000 RPM

\TC9133

Tachometer/Hour Meter Combo


IMPCO CARBURETION


CARBURETORS

CA125-52 Impco Carburetor LP/NG (Mixer&Throttle Body) $280.03

CA125M Impco Mixer only $162.30

CA225-94 Impco Carburetor LP (Mixer&Throttle Body) $381.91

CA225M Impco Mixer only (LP) $200.33

225-94 Impco Carburetor NG (Mixer&Throttle Body) $369.52

CT425-2-37 Impco Carburetor NG (Mixer&Throttle Body) w/ 3” Flange $690.06

CT425-2 Impco Carburetor LP (Mixer&Throttle Body) w/ 3” Flange $689.73

CT425M-2 Impco Mixer only $314.00

CONVERTERS

JB Impco Model JB Vaporizer $87.58

LB Impco Model LB Vaporizer $297.48

EB Impco Model E Vaporizer w/ Blue Spring $235.82

REPAIR PARTS

AV1-12 LP #16 Valve & Diaphragm Assy. (CA225-94) $56.12

AV1-14 LP & NG Valve & Diaphragm Assy. (CA125-52) $34.33

CV1-12 NG #17 Valve & Diaphragm Assy. (225-94) $79.03

AV1-16-2 LP Valve & Diaphragm Assy. (CT425-2) $110.15

AV1-1637-2 NG Valve & Diaphragm Assy. (CT425-2-37) $158.12

RK-E Repair Kit for Model E $75.48

RK-J Repair Kit for Model J $21.88

RK-L-2 Repair Kit for Model L w/ silicone diaphragm $95.03

7008A-12-O Fuel Solenoid, for LP 12V engines $42.75

A121-24V Fuel Solenoid, for LP 24V NGE engines $60.00

454460 Carb Adapter, 4BBL (350-454) $92.00

56 Gasket, intake to carb adapter $7.00

73355G002 Natural Gas Filter Element only $90.00


CERTIFIED GAS ENGINE CARBURETIONFOR HPPI PRODUCED ENGINES


IEPR

38901060 IEPR for 3.0L Chevy $1150.00

38901059 IEPR for 4.3L Chevy $935.00

38901058 IEPR for 5.7L Chevy $990.00

38901057 IEPR for 8.1L Chevy $990.00

38901133 IEPR for 8.8L Chevy $930.00

MIXER

32501704 Mixer 3.0L Chevy $200.00

32501774 Mixer 4.3L Chevy $275.00

32501705 Mixer 5.7L Chevy (E330) $265.00

32501690 Mixer 8.1L & 8.8L Chevy (480) $415.00

REPAIR PARTS

32502216 Asco Valve 3/4” (3.0L-4.3L) $190.00

8214260 Asco Valve 1-1/4” (5.7L - 8.8L) $375.00

106871 Mixer Repair Kit (32501704) $59.00

106823 Mixer Repair Kit (1 x 4.3L-5.7L) (2 x 8.8L) $48.00

32501778 Adapter, Fuel Inlet to Mixer (3.0L-4.3L) $15.00

1139524 Screw for 32501778 (QTY-4) $0.50

32501779 Adapter, Fuel Inlet to Mixer (5.7-8.8L) $30.00

35000674 Screw for 32501779 (QTY-4 ) $0.50

HUSKER POWER PRODUCTSPG 14

DRIVESHAFT SIZE PART # LIST PRICE

SHORT COUPLED DRIVESHAFT ASSEMBLIES

SC – 41 X 9-7/8” 8134-SF $195.00

SC – 48 X 9-7/8” 202990-1 $356.00

SC – 55 X 9-7/8” 204249-6 $425.00

SC – 61 X 9-7/8” 906224-1 $1,059.00

FLEXIBLE IRRIGATION DRIVESHAFTS TUBULAR TYPE

SL - 41 X 24” 917785-1 $200.00

SL - 41 X 36” 917785-2 $200.00

SL - 41 X 48” 917785-3 $200.00

SL - 48 X 24” 917786-1 $250.00

SL - 48 X 36” 917786-2 $250.00

SL - 48 X 48” 917786-3 $250.00

SL - 55 X 24” 917787-1 $370.00

SL - 55 X 36” 917787-2 $370.00

SL - 55 X 48” 917787-3 $370.00

SL - 61 X 24” 917788-3 $605.00

SL - 61 X 36” 917788-1 $605.00

SL - 61 X 48” 917788-2 $605.00

SL - 71 X 36” 917789-1 $662.00

SL - 71 X 48” 917789-2 $662.00

Bolt Kit 35-41 series 35B-HWK $3.00

Bolt Kit 48 series 48B-HWK $4.00

DRIVESHAFTS

WARNING ALL DRIVESHAFTS

SHOULD BE COVERED WITH SHAFTGUARD TO

PREVENT INJURY. SEE PAGE 15 FOR GUARDS.

\SHORT COUPLED DRIVESHAFT

\TUBULAR TYPE


DRIVESHAFT PARTS

PART # LIST PRICE

U-JOINTS

1410 Series 5-160X $19.75

1480 Series 5-188X $31.25

1550 Series 5-155X $37.25

FLANGE YOKE

1410 Series 3-2-159 $34.00

1480 Series 3-2-479 $40.00

SLIP YOKE

1410 Series 3-3-118KX $85.00

1480 Series 3-3-1601KX $57.75

DRIVE SHAFT SHIELDS

10”- 18” Adjustable (7” Dia.) 10-18 $63.50

24”- 42” Adjustable (7” Dia.) 24-42 $66.25

36” - 54” Adjustable (7” Dia.) 36-54 $71.75

36” - 66” Adjustable (12” Dia.) 36-66 $137.75

14” - 24” Adjustable (12” Dia.) 14-24 $94.75

28” - 54” Adjustable (12” Dia.) 28-54 $149.25

Mounting Hardware included on all sizes

\SLIP YOKE

\FLANGE YOKE

U-JOINT/


VIBRA-DAMP RESILIENT DRIVESHAFTS

DRIVESHAFT SIZE PART # LIST PRICE AVAILABILITYSL - 41 X 36” HP2-40-72 call for pricing special order only - 60 day lead

SL - 41 X 48” HP2-40-73 call for pricing special order only - 60 day lead

SL - 48 X 36” HP2-40-75 call for pricing special order only - 60 day lead

SL – 48 X 48” HP2-40-76 call for pricing limited stock on hand; special order - 60 day lead

SL – 55 X 36” HP2-40-99 call for pricing special order only - 60 day lead




SL – 71 call for pricing special order only - 180 day lead

SL – 81 call for pricing special order only - 180 day lead

RUBBER DAMPENED DRIVELINES FOR THE REDUCTION OF TORSIONAL VIBRATION

\50% OR MORE REDUCTION IN TORSIONAL VIBRATION

800.752.0888CALL


of items not listed


ENG

INE

& G

EARH

EAD

CO

MPA

NIO

N F

LAN

GES

BORE

KEY

SIZ

E13

50 &

141

0 SE

RIES

PA

RT #

RETA

IL

PRIC

E14

80 &

155

0 SE

RIES

PA

RT #

RETA

IL

PRIC

E16

10 S

ERIE

S PA

RT #

RETA

IL

PRIC

E17

10 S

ERIE

S PA

RT #

RETA

IL

PRIC

E

11/

43-

1-10

13-1

$37.

00

1 1/

81/

43-

1-10

13-2

$37.

00

1 1/

41/

43-

1-10

13-3

$37.

00

1 1/

45/

163-

1-10

13-4

$37.

00

1 3/

85/

163-

1-10

13-5

$37.

00

1 3/

83/

83-

1-10

13-6

$37.

00

1 7/

163/

83-

1-10

13-7

$37.

00

1 1/

23/

83-

1-10

13-8

$37.

004-

1-11

33-1

$64.

50

1 5/

83/

83-

1-10

13-9

$37.

004-

1-11

33-2

$64.

50

1 3/

43/

83-

1-10

13-1

0$3

7.00

4-1-

1133

-3$6

4.50

1 7/

83/

83-

1-10

13-1

1$3

7.00

4-1-

1133

-4$6

4.50

1 7/

81/

23-

1-10

13-1

2$3

7.00

4-1-

1133

-5$6

4.50

21/

23-

1-10

23-1

$37.

004-

1-11

33-6

$64.

505-

1-87

3-1

$128

.50

2 1/

8se

e se

ries

3-1-

1023

-2

with

1/2

key

$3

7.00

4-1-

1133

-7

with

5/8

key

$64.

505-

1-87

3-2

$128

.50

2 1/

45/

83-

1-10

23-3

$37.

004-

1-11

33-8

$6

4.50

5-1-

873-

3$1

28.5

0

2 3/

85/

83-

1-10

23-4

$37.

004-

1-11

33-9

$64.

505-

1-87

3-4

$128

.50

2 7/

165/

83-

1-10

23-5

$37.

004-

1-11

33-1

0$6

4.50

5-1-

873-

5$1

28.5

06-

1-12

53-1

$193

.50

2 1/

25/

83-

1-10

23-6

$37.

004-

1-11

43-1

$64.

505-

1-87

3-6

$128

.50

6-1-

1253

-2$1

93.5

0

2 3/

45/

83-

1-10

23-7

$37.

004-

1-11

43-2

$64.

505-

1-87

3-7

$128

.50

6-1-

1253

-3$1

93.5

0

2 7/

83/

4H

P2-4

0-78

$207

.00

HP2

-40-

79$2

07.0

0

2 15

/16

3/4

4-1-

1143

-3$6

4.50

5-1-

873-

8$1

28.5

06-

1-12

53-4

$193

.50

33/

44-

1-11

43-4

$64.

505-

1-87

3-9

$128

.50

6-1-

1253

-5$1

93.5

0

3 3/

87/

8H

P2-4

0-80

$207

.00

3 1/

27/

84-

1-11

43-5

$64.

505-

1-88

3-1

$149

.50

6-1-

1253

-6$1

93.5

0

3 15

/16

15-

1-88

3-4

$149

.50

6-1-

1253

-7$1

93.5

0

41

5-1-

883-

3$1

49.5

0


DRIVE LINE & COMPANION FLANGE SPECS


POWER TAKE-OFF CLUTCHES

APPLICATION PART # LIST PRICE

ROCKFORD STYLE OVER CENTER PTO CLUTCH

SAE 5-7 1/2 Single Plate HP2-40-17 $900.00

SAE 4-10 Single Plate HP2-40-19 $990.00

SAE 3-10 Single Plate* HP2-40-16 $990.00

SAE 3-11 1/2 Single Plate* HP2-40-02 $1,020.00

SAE 3-11 1/2 Single Plate Metallic 4-34511 $1,295.00

SAE 3-11 1/2 Two Plate HP2-40-57 $1,465.00

SAE 2-11 1/2 Single Plate HP2-40-01 $1,265.00

SAE 2-11 1/2 Two Plate HP2-40-11 $1,490.00

SAE 1-14 Single Plate (side load) HP2-40-22 $2,304.00

SAE 1-14 Single Plate (In-line load) HP2-40-84 $2,690.00

SAE 1-14 Two Plate HP2-40-24 $3,350.00

SAE 1-14 Three Plate HP2-40-25 $4,790.00

GAS ENGINE PTO UNITS

Chevy/GM Most Engines (41 Flange) 181, 262, 350, 454

1050 $330.00

Chevy/GM Most Engines (41& 48 Flange) 181, 262, 350, 454, 496

1051 $360.00

Chevy/GM Most Engines -2 Bearing HD (41& 48 Flange) 181, 262, 350, 454, 496

1051AHD $430.00

Ford Engines w/ Industrial Housing (41 Flange) 300, 428, 460

1030 $350.00

Ford Engines w/ Industrial Housing (48 Flange) 300, 428, 460

1030A $370.00

GAS ENGINE SIDE LOAD BELT PTO UNITSAdditional Sizes for all Clutch Models maybe Available FOB Manufacturer

Chevy/GM Most Engines 181, 262, 350, 454, 496

1250 $670.00

300 Ford Engines w/ Industrial Housing

1230 $670.00

460 Ford Engines w/ Industrial Housing

1240 $1,000.00

Replacement parts are available for above PTO’S.

800.752.0888CALL


* PLEASE NOTE Detailed parts breakdowns on

following pages


GEAR REDUCTION CLUTCH ASSEMBLIES

DESCRIPTION STARTING PRICE FOR SINGLE DISCTAYLORIA SINGLE OUTPUT $4,900.00

Ratios for 3 standard speeds 1800, 2150, 2400 RPMFitting SAE #4, #3, #2, & #1 Bell HousingsMechanical Operated Clutches: 10”, 11 1/2” SP, 11 1/2” DP, 14” DP, 14” TPOutput Options: (540, 1 3/8”-6) (1000, 1 3/8”-21) (1000, 1 3/4”-20)

DOUBLE OUTPUT $6,300.00

Ratios for 3 standard speeds 1800, 2150, 2400 RPMFitting SAE #4, #3, & #2 Bell HousingsMechanical Operated Clutches: 10”, 11 1/2” SP, 11 1/2” DP

GRA SINGLE $3,650.00

8 Different RatiosFitting SAE #5, #4, & #3 Bell HousingsMechanical Operated Clutches: 6 1/2”, 7 1/2”, 8” & 10”Output Options: (540, 1 3/8”-6) (1000, 1 3/8”-21)

Please call for more options and with specific details on engine. Availability is normally 2-4 week lead time.

HOUSING: SAE #3CLUTCH: 10” HE (SINGLE PLATE)APPLICATION: SIDE LOAD OR IN-LINE


NACD CLUTCH KIT BREAKDOWN434510AM (HP2-40-02)

HOUSING: SAE #3CLUTCH: 11.5” HE (SINGLE PLATE)APPLICATION: SIDE LOAD OR IN-LINE

REFERENCE# PART # DESCRIPTION LIST1 2-04245 Bell Housing $662.25

5 2-60843 Grease Zerk $2.75

6 2-04751 Jam Nut $2.75

7 2-60843 Grease Zerk $2.75

8 2-06235 Driveshaft $995.00

9 390 Main Bearing Cone only (2 req)

$25.00

9 394A Main Bearing Cup only (2 req) $12.25

10 2-05710 Bearing Retainer $58.75

11 2-05368 Adjusting Lock $2.75

14 2-06431 Cross Shaft $49.00

15 2-04536 Woodruff Key (2 required) $3.50

17 3-09611 Release Yoke $82.75

18 2-03062 Bolt (2 required) $2.75

20 3-08365 Shifting Lever $59.50

25 5306WS Pilot Bearing (2-07431) $60.00

26 2-04715 Nut $15.25

27 2-07232 Locking Washer $6.25

32 2-09570 Grease Hose $32.00

69 2-60843 Grease Fitting (2 required) $2.75

79 4-10928 Clutch Pack $632.00



REFERENCE# PART # DESCRIPTION LIST79 4-10928 Clutch Pack $632.00

109 2-02986 Clutch Body $194.00

110 2-03565 Facing Plate (1 piece) $73.00


112 2-05504 Pressure Plate $147.50

113 2-05821 Adjusting Ring $113.00

125 2-06566 Release Sleeve $100.50

127 3-33811 Release Bearing $124.50

132 3-09226 Sleeve & Bearing Assy $214.25

146 2-05996 Wear Ring $22.25

935 2-34499 Single Plate Drive Ring $129.00

2-05865 Double Plate Drive Ring $236.50

412-436 Use Clutch Kit 3-32920 or see following pages for clutch kit breakdown

* 3-32920 Clutch Kit $68.50

CLUTCH MODEL: 11.5” HE (SINGLE PLATE)FRICTION MATERIAL: ORGANICRELEASE BEARING TYPE: BRONZE COLLAR



REFERENCE# PART NUMBER DESCRIPTION LIST1 2-04245 Bell Housing $662.25

5 2-60843 Grease Zerk $2.75

6 2-04751 Jam Nut $2.75

7 2-60843 Grease Zerk $2.75

8 2-06235 Driveshaft 401.75

9 390 Main Bearing Cone only 2 (req) $25.00

9 394A Main Bearing Cup only 2 (req) $12.25

10 2-05710 Bearing Retainer $58.75

11 2-05368 Adjusting Lock $2.75

14 2-06431 Cross Shaft $49.00

15 2-04536 Woodruff Key (2 required) $3.50

17 3-09611 Release Yoke $82.75

18 2-03062 Bolt (2 required) $2.75

20 3-08365 Shifting Lever $59.50

25 5306WS Pilot Bearing (2-07431) $60.00

26 2-04715 Nut $15.25

27 2-07232 Locking Washer $6.25

32 2-09570 Grease Hose $32.00

69 2-60843 Grease Fitting (2 required) $2.75

79 4-10903 Clutch Pack $686.25

HOUSING: SAE #3CLUTCH: 10” HE (SINGLE PLATE)APPLICATION: SIDE LOAD OR IN-LINE


CLUTCH MODEL: 10” HE (SINGLE PLATE)FRICTION MATERIAL: ORGANICRELEASE BEARING TYPE: BRONZE COLLAR

REFERENCE# PART NUMBER DESCRIPTION LIST79 4-10903 Clutch Pack $686.25

109 2-02978 Clutch Body $154.75



112 2-05507 Pressure Plate $126.25

113 2-05821 Adjusting Ring $113.00

125 2-06566 Release Sleeve $100.50

127 3-33811 Release Bearing $124.50

132 3-09226 Sleeve & Bearing Assembly $214.25

136 3-08812 Pressure Plate Assembly $138.75

146 2-05996 Wear Ring $22.25

935 2-05848 Drive Ring $103.25

412-436 Use Clutch Kit 3-32920 or see following pages for clutch kit breakdown

* 3-32920 Clutch Kit $68.50



NACD CLUTCH KIT BREAKDOWN332920AM

REF # PART NAME PART # QTY LIST412 Lever Spring 2-09558 1 $9.75

413 Lever 2-04551 3 $12.50

414 Clevis Pin 2-04801 3 $2.75

415 Retaining Ring 2-05896 3 $2.75

417 Lock Bolt 2-03122 1 $3.75

418 Lock Washer 2-07295 1 $2.75

419 Adjustment Lock 2-04689 1 $5.50

430 Link 2-04651 6 $4.50

431 Clevis Pin 2-04800 3 $2.75

432 Retaining Ring 2-05897 3 $2.75

433 Clevis Pin 2-04800 3 $2.75

434 Retaining Ring 2-05897 3 $2.75

436 Sep. Spring (short) 2-07058 3 $2.75

436 Sep. Spring (long) 2-07060 3 $6.25

437 Roll Pin 2-05040 3 $2.75

CLUTCH MODEL: 10” HE, 11.5” HE & 11.5 HE (DP)

DRIVE PLATE, AUXILIARY PULLEY & FLEX PLATES

PART # DESCRIPTION LIST PRICEDRIVEPLATE

HP2-40-15 7.5”SAE x WL 41 $164.00

3020 8”SAE x WL 41 $170.00

HP2-40-09 10” SAE x WL 41 & 48 $195.50

HP2-40-10 11.5” SAE x WL 41 & 48 $177.00

HP2-40-49 11.5” SAE X WL 61 & 71 $265.00

HP2-40-31 14” SAE X WL 61 & 71 $400.00

3090 350-454 Chevy 12” Clutch WL 41 & 48 $195.50

PULLEY (AUXILIARY)

2108 181 Chevy (6.8” Dia.) $170.00

2109 262 & 350 Chevy (Serpentine)(7.0” Dia.) $175.00

2111* 350 Chevy (w/ center ring) (*7.0” Dia 2 B grooves on the inside of pulley)

$189.00

2114 454 Chevy (7.0” Dia on Aux.) $175.00

2116 496 Chevy (7.0” Dia. on Aux.) $373.00

2012 300 Ford (6.8” Dia. on Aux.) $170.00

2022 460 Ford (7.0” on Aux.) $183.00

HP2-40-06A 6BB/6BD1/6BG1 Isuzu (7.625” on Aux.) $180.00

HP2-40-52 6SD1 Isuzu (7.4” on Aux.) $670.00

HP2-40-83 4HK1 Isuzu (6.5” on Aux.) $187.00

HP2-40-88 4JJ1 Isuzu w/ keyed crank pulley(7.0” on Aux.) Must replace bolt & washer when serviced

$400.00

HP2-40-88A 4JJ1 Isuzu w/ bolted crank pulley (7.0” on Aux.) Must replace bolt & washer when serviced

$434.00

HP2-40-81 6.8” 41 Series; Pulley mounts between companion flange & driveline

$167.00

HP2-40-82 6.8” 48 Series; Pulley mounts between companion flange & driveline

$190.50

(Other pulleys are available for Perkins, John Deere, IH, etc. Please call for pricing.)BOWEX FLEX PLATES & HUBS

HP2-40-39A SAE 7.5 Fly Wheel Flex 42 Plate $95.50

HP2-40-39B 15 Tooth Spline Hub for Flex 42 Plate $37.00

HP2-40-40 1 Keyed Hub for Flex 42 Plate $40.50

HP2-40-51 7/8 x 13 tooth Hub for Flex 42 $43.50

HP2-40-58 7/8 x 1/4 Keyed Hub for Flex 42 $50.00

HP2-40-54 SAE 10 Fly Wheel Flex 48 Plate & 13Tooth 7/8 Hub $186.50

HP2-40-55 Bowex Pump Mount SAE #4 2 & 4 Bolt “B” Plate $280.53

HP2-40-38 Bowex Pump Mount SAE #5 2 & 4 Bolt “B” $185.50PG 26

LIMA MAC IRRIGATION GENERATORS480 VOLT, 3 PHASE, 2 BEARING TYPE

KW PART NUMBER LIST PRICE10 HP2-70-02 $3,445.00

12 HP2-70-03 $3,700.00

15 HP2-70-04 $4,190.00

20 HP2-70-06 $5,340.00

25 HP2-70-37 $5,980.00

Generators are FOB Hastings, Nebraska or shipped direct from factory, prepaid with lead time. Other LIMA MAC and Marathon generators are available.

800.752.0888CALL



ENGINE RADIATORS & COOLING PACKAGES

APPLICATION PART # RETAIL PRICE4BG1 Crated Radiator 800865-4Z $825.00

4BG1 Radiator Kit w/ Fan HP1-25-30C KIT $1,300.00

4BG1 Radiator Kit w/o Fan HP1-25-30 KIT $1,100.00

6BG1 Crated Radiator 800865-6Z $825.00

6BG1 Radiator Kit w/ Fan HP1-25-15C KIT $1,300.00

6BG1 Radiator Kit w/o Fan HP1-25-15 KIT $1,100.00

6BD1 Radiator Kit w/ Fan HP1-25-15DC KIT $1,400.00

181 Crated Radiator 800340-Z $600.00

181 Radiator Kit w/ Fan TPI1809A $950.00


262 Radiator Kit w/ Fan TPI1813A $1,150.00


350 Radiator Kit w/ Fan & Serpentine Belts TPI1811A $1,250.00

350 Radiator Kit w/ Fan & V- Belts TPI1811A OLD $1,250.00

454 Standard Crated Radiator 800342-Z $860.00

454 Standard Radiator Kit w/ Fan TPI1812A $1,250.00

454 Heavy Duty Crated Radiator 800343-Z $950.00

454 Heavy Duty Radiator Kit w/ Fan TPI1812E $1,450.00


496 Radiator Kit w/ Fan TPI1814 $1,450.00

460 Ford Crated (while supplies last) 800370B-Z $900.00

Crated Radiators

include:Core Guard,

Finger Guard & Shroud

Diesel Radiator Kits include:

Crated Radiator, hoses, mounting

brackets, hardware kits,

fan & spacers if (stated w/ fan)

Gas Radiator Kits include:

Crated Radiator, hoses, mounting

brackets, hardware kits,

Fan, fan spacers, belts and

alternator pulley if required.

Kits may not fit perfectly due

to different engine frames

and set ups

PART # PRESSURE UP TO

CONTINUOUS H.P.

LIST PRICE

H-424 150 psi 40 $725.00

H-430 150 psi 75 $800.00

H-440 150 psi 95 $925.00

H-448 150 psi 135 $1025.00

H-460 150 psi 200 $1175.00

BLU RIVER HEAT EXCHANGERS

Complete Engine Coolers available. Please call for pricing.

800.752.0888CALL


of items not listed


INDUSTRIAL GAS ENGINE PLUG WIRES

PART # APPLICATION LIST PRICETPI2343 181 Non Certified $52.00

TPI2322 262 Chevy $33.00

TPI2333 305,350,454, 535 Chevy (No Coil Wire)

$40.00

TPI2334* 496/8.1L Chevy $50.00

12074074 Chevy Coil Wire $8.00

TPI2324 300 Ford (Std.) w/ coil wire $25.00

TPI2325 300 Ford (HEI) w/ coil wire $26.00

TPI2328 460 (Std.) w/ coil wire $43.00

TPI2329 460(HEI) w/ coil wire $42.00

TPI2340** Suppression Core 350,454 Chevy $40.00

TPI2341** Suppression Core 300 Ford (HEI) $27.00

TPI2342** Suppression Core 460 Ford (HEI) $40.00 * Double Silicone insulated jacket with a spiro bound core

** Suppression Core wire sets will cause less interference with electrical equipment. Great for applications with sensitive electronics.

PART # APPLICATION LIST PRICE101481 3.0L Certified

only (Coil Wire not included)

$66.00

103827 3.0L Coil Wire $16.75

TPI2335* 262/4.3L Chevy $72.00

TPI2345* 350/5.7L Chevy $66.00

TPI2337 496/8.1L/8.8L Chevy $75.25

INDUSTRIAL CERTIFIED GAS ENGINES PLUG WIRES

All Certified Engine wire sets are Double Silicone insulated jacket with a spiro bound core. *Marked wire sets come with 90deg or 180deg spark plug boot ends as per application and 180deg LT1 coil ends, sets also include coil wires. These wire sets are made for Husker Power Products, Inc. produced certified engines.

PLEASE NOTEAll wires are double silicone

insulated jacket with a copper wire core unless noted by an *

PG 29

INDUSTRIAL GAS ENGINE EXHAUST MANIFOLDS/HEADERS

PART # APPLICATION LIST PRICE5065 262 Chevy $212.00 / per set

5060 350 Chevy $230.00 / per set

5010 454 Chevy $230.00 / per set

5096 496 Chevy $240.00 / per set

900786 300 Ford $460.00 / each

5052 460 Ford $240.00 / per set

All Headers are steel construction and come unpainted with ship loose stacks.

\5060

350 Chevy


INTAKE & EXHAUST SYSTEM ACCESSORIES

PART # DESCRIPTION LIST PRICEMUFFLERS

86177M 2” ID/OD Muffler $65.75

4018STA 2 1/4” Irrigation Muffler $48.00

M065071 2 1/2” Inlet Muffler $123.50

4318STA 3” In / 3” Out Glass Pak $63.00

M080018 3” ID/OD Muffler (fits most Isuzu Industrial Engines) $163.50

HP2-35-67 2 1/8” Exhaust Clamp (plated) $3.00

HPC225 2 1/4” Exhaust Clamp $2.50

HP2-35-34 2 1/2” Exhaust Clamp $3.00

HP2-35-06 3” Exhaust Clamp $5.25

HD400 4” Exhaust Clamp $7.00

(More Exhaust Clamp sizes are available; please call for price and availability)

EXHAUST PIPES

HP1-35-13 2” Turn Out (16” tall) $13.50

HP1-35-10 2 1/2” Turn Out (16” tall) $23.75

HP1-35-11 3” Turn Out (16” tall) $28.75

HP2-35-72 2-1/2” Curved Exhaust Pipe (36”tall) $60.00

HP2-35-01 3” Curved Exhaust Pipe (36” tall) $64.50

HP2-35-71 4” Curved Exhaust Pipe (36” tall) $80.50

(See Mufflers above for Exhaust Clamps)

EXHAUST RAIN CAPS

35225 1 1/2” Rain Cap $13.00

HP2-35-53 2” Cushion Type Rain Cap $18.50

P270533 2 1/4” Rain Cap $18.50

FB0017 2 3/8” Rain Cap $12.50

HP2-35-40 2 1/2” Rubber Cushion Rain Cap $19.25

HP2-35-28 3” Rubber Cushion Rain Cap $20.75

FB0023 3” Rain Cap $12.00

P270538 3-1/2” Rain Cap $21.50

HP2-35-24 4” Rain Cap $24.25

HP2-35-66 5” Rain Cap $29.00

HP2-30-127 6” Rain Cap $37.50

AIR INTAKE BONNET

HP2-30-146 Gas Air Cleaner Bonnet (PLASTIC ONLY) $42.00

101 Rod and Nut assembly for above Bonnet $10.00

PG 312017 ACCESSORY PRODUCTS CATALOG


EXHAUST PRIMERS


PROTEK EXHAUST PRIMERS

EP150/225-3 1/2 Exhaust Primer for 3 1/2” Exhaust $844.50

EP150/225-3NPT Exhaust Primer for 3” NPT Exhaust $783.00

EP250/300-3NPT Exhaust Primer for 3” NPT Exhaust $793.50

EP60/90 Exhaust Primer $687.50


EP60/90-1-1/2 Exhaust Primer for 1 1/2” Exhaust $594.75


EP60/90-2 NPT Exhaust Primer for 2” NPT Exhaust $638.75

EP150/225 Exhaust Primer for 3” Slip Fit Exhaust $745.75

EP150/225 Exhaust Primer for 4” Slip Fit Exhaust $724.00

POWER PRIMERS

Model 30 12V Power Primer $1762.00

\EP 60/90

Exhaust Primer


MANIFOLD PRIMER

PART # DESCRIPTION LIST PRICE

1000 Vacuum Primer Assembly $479.25

MP2000 Vacuum Primer Assembly $479.25

1001A Top Cover Assembly $153.25

1002A Lower Cover Assembly $91.00

1003 Lower Housing $50.25

1004 Upper Housing $42.50

1005 Bracket (2 required) $18.00

1008A Float Assembly $54.25

1010A Tie Bolt w/ nuts (3 required) $14.50

1011 Upper Cork Gasket $5.00

1012 Cork Gaskets (3 required) $1.75

1014 Brass Steel Angle Valve $52.00

/ 1001A

/ 1003

/ 1005

/ 1010A

/ 1012

/ 1014

\ 1002A

\ 1004

\ 1008A


The above list of engine heaters is now in stock. Many other heaters are available on a special order basis.

110V ENGINE HEATERS

PART # TYPE APPLICATION LIST PRICE3308001 Tank 750W Tank Type Heater $142.75

3308002 Tank 1000W Tank Type Heater $158.50

3308003 Tank 1500W Tank Type Heater $162.50

3400017 Magnetic 200W Magnetic Heater $101.50

3100098 Frost plug 3CB1 Isuzu $107.50

HP2-05-36 Frost plug 3CD1 Isuzu $72.50

3100067 Frost plug 3KC1, 3KR1 Isuzu $54.50

3100098 Frost plug 3LB1 Isuzu $107.50

3100094 Frost plug 3LD1, 3LD2 Isuzu $95.75

310-0065 Frost plug 4BB1, 4BD1, 4BG1 Isuzu $43.75

3100069 Frost plug 4JB1, 4JG1 Isuzu $47.00

3100094 Frost plug 4LC, 4LE1, 4LE2 Isuzu $95.75

310-0065 Frost plug 6BB1, 6BD1, 6BG1 Isuzu $43.75

3100068 Frost plug C240 Isuzu $44.75

8602220 Frost plug E120, 6RB1 Isuzu $183.25

3308003 Tank 6SA1 Isuzu $162.25

3308003 Tank 6HK1 Isuzu $162.25

3500151 Frost Plug 4HK1 $128.00

\HP2-05-36

3CD1 Isuzu

\3308003

1500W tank type heater

800.752.0888CALL



THROTTLE CABLES & PARTS

PART # DESCRIPTION LIST PRICE

CABLES

HP2-15-01 60” Throttle Cable w/ Vernier Control Head (threaded end) $76.50

HP2-15-02 48” Throttle Cable w/ Vernier Control Head (threaded end) (4BD, 4BG, 6BD, 6BG)

$75.00

HP2-15-05 Throttle Cable (CAT) (threaded end 10x 32 machine screw) $69.25

HP2-15-06 Throttle Cable (CASE) (wire end) $56.00

HP2-10-07 84” Kill Cable (wire end) $21.00

R09D3.5X06 6ft Throttle Cable w/ T handle (wire end) $20.00

VCGTX06 * 6ft Throttle Cable w/ Vernier Control Head (wire end) $58.25



*Longer Lengths are available.

CABLE PARTS

HP2-15-11A Vernier Control Head (for HP2-15-XX throttle cables above) $27.75

VCGTHO Vernier Control Head for VCG Cables $34.50

HP2-00-125 Wire Stop Kit $8.50

HP2-15-03 Clevis 1/4” Throttle CTR $6.00

HP2-15-07 Swivel Cable Stop (used on HP2-10-07) $1.50

HP2-15-08 Cable Clip (used on HP2-10-07) $0.75

1548 Throttle Stop “Bullet” $1.75

\R09D3.5X06

6ft Throttle Cable w/ T handle (wire end)

\VCGTX06

6ft Throttle Cable w/ Vernier Control Head (wire end)

PG 36

ENGINE OIL DRAIN VALVES

PART # SIZE DESCRIPTION PRICE

OIL DRAIN VALVES

FG7BN M22-15 3CD1 $44.50

F101N 1/2” – UNF $40.00

F103N 12mm-1.25 $40.00

F104N 18mm-1.5 Fits Most B-Series Cummins $40.00

F105N 20mm-1.5 Fits Most Isuzu $40.00

F106N 14mm -1.5 460 Ford $40.00

F107N 12mm-1.75 ’95 & up 454 $40.00

F107SX 12mm-1.75 W/ Swivel ’95 & up 454 $47.00

F108N M16-1.5 3CA/3CB $40.00

F109N 12mm-1.5 $40.00

F110N 3/8” Pipe $40.00

T200N NPT 1-12 $44.50

T201N NPT 3/4” -1/4 $44.50

T202N NPT 1/2” 454 Power Max $44.50

T203N 1”-18 UNF $44.50

T204N 3/4”-16 UNF Caterpillar, Ford Diesel, most Perkins $44.50

T205N 1 1/8”-12mm UNF $44.50

T206N 7/8”-14 UNF $44.50

T207N 26mm-15 $44.50

T208N 7/8”-18 UNF $44.50

OIL PAN ADAPTERS

HP2-00-175 12mm-1.75 x 1/2” NPT Most Chevy Engines $25.00

HP2-00-176 Gasket Gasket for HP2-00-175 $2.75

HP2-00-152 22mm-1.5 x 1/2” NPT $17.75


HP2-00-154 16mm-1.5 x 1/2” NPT $17.75


HP2-00-172 14MM-1.5 x 1/2” NPT $22.25


HP2-00-47 20mm-1.5 x 1/2” NPT $20.00


HP2-00-47A 24mm-1.5 x 1/2” NPT $20.00

HP2-00-50A Gasket Gasket for HP2-00-47A $2.75

HP2-00-01 1/2” NPT x 30” Drain hose -1/2” male NPT on both ends

$15.00

N-SERIES valve (as pictured above) is equipped with a nipple to enable the operator to attach a hose.

800.752.0888CALL

for more sizes,

pricing and availability.


DRIPPER REGULATORS & OIL ACCESSORIES


DRIPPER AND TANK COMPONENTS

82124033 Dripper Regulator $56.00

81963365 Dripper Tank $275.00

82124025 Shut Off Valve $32.50

PT24044 1/4” Dripper Hose $0.50 per foot

68X4 Compression Fitting 1/4 Tube OD X 1/8 NPT $1.25

60X4 Compression Sleeve 1/4” $0.40

82124058 Dripper Lower Gasket $4.90

82124066 Dripper Top Gasket $4.90

82124041 Regulator Glass $4.90

SIGHT GAUGES

B1144-14 Sight Gauge, 4” (vented as shown above) $19.00

B1144-14S Sight Gauge, 4” (open top for 1/4” NPT Nipple) $45.75

B-1144-23 Sight Gauge, 5” $21.50

B-1150-5 Sight Gauge, 6” with 90° long elbow $42.50

B2577-11 Sight Gauge, 3 1/2” with 90° inlet $32.00

Replacement gaskets also available

\VENTED SIGHT GAUGE

\ 81963365

Dripper Tank

\82124033

Dripper Regulator


ENGINE TRAILERS

PART # DESCRIPTION LIST PRICETPI2040 6’ Engine Trailer with 2 Mounting Rails $1,055.00

TPI2041 7’ Engine Trailer with 2 Mounting Rails $1,065.00

TPI2042 8’ Engine Trailer with 2 Mounting Rails $1,075

TPI2045 10’ Engine Trailer with 2 Mounting Rails $1,105.00

HP1-20-27 Generator Bracket Diesel Standard $200.00

TPI2037A Generator Bracket - Trailer Side Mount $275.00

TPI2038 Generator Bracket – T-L $275.00

TPI2039 Generator Bracket - Rear Mount $400.00

TPI2036 Generator Bracket - Belly Mount $400.00

TPI2035 Trailer Leg (less bracket) $30.00

TPI2034 Trailer leg Bracket $20.00

TPI2033 Extra Mount Rail $90.00

TPI2030 Axle Less Wheels & Tires $260.00

TPI2030A Axle with Wheels & Tires $640.00

91260 Trailer Jack w/ Foot Front Mount $41.00

91215 Trailer Jack Swivel w/ Foot $62.00

TPI 550 Telescoping Engine Stands $300.00

Trailers are priced unassembled, FOB Hastings, NE.

PLEASE NOTEThese trailers are for off-highway use only.


ENGINE SHELTERS

PART # DESCRIPTION LIST PRICEEngine Shelter (unassembled)

Includes 2 Bows, 4 sheets, 26GA sheet metal & 1 Bolt Package $825.00

Bows Extra Bow $225.00 / ea

Extra Sheet Sheet of 26GA Sheet Metal $120.00 / ea

Bolt Package Hardware for 1 Engine Shelter $50.00 / per kit

HP2-10-01 Bolt Down Base $120.00 / set of 4

HP2-10-01A Cast In Place Base $120.00 / set of 4

P8101-723 Wedge Anchor Bolt (not included in bolt package) $2.25 / ea

PLEASE NOTEHusker Power Products recommends

all electronic controlled engines have a shelter over it.

\144” D

\93” H

\96” W

\67” H


Important Notice Regarding Product Repairs and Warranty Claims

In order to provide you with the best service possible and to expedite all product repairs and warranty claims, we are changing the processes required to complete the repair or warranty claim. This will require certain actions and information on your part. Partial details follow. For complete details please contact your Murphy Inside Sales Representative.

WR Number: A Warranty/Repair Return Authorization Number (WR#) will be required prior to all product returns. This number will allow both of us to track the product and to expedite processing of your request. Simply contact our Inside Sales to request this number. They will ask certain questions that will identify your exact request so that we can fully comply. They will also advise you of certain procedural changes or conditions that may apply to your request, as outlined below.

Complaint/Request Details: Effective January 1, 2005, Warranty claims will require a detailed explanation of the problem or complaint so that we can directly address your concerns. A large percentage of times we are unable to find a problem with the product because we don’t know the details of your complaint, and we thus don’t know what to look for. We evaluate the product against our specifications, but that may not address your complaint. This explanation will be required for Warranty requests in order to receive the return authorization (WR#). This explanation is also recommended for Repairs but is not required. See below for Repairs.

Evaluation Fee: Effective January 1, 2005 we will initiate an Evaluation Fee to cover certain costs associated with diagnosing problems, or suspected problems, with certain products. Your Murphy Sales Rep will advise you of this charge, and when it applies, when you request the WR#. For example, if our evaluation does not support a Warranty Claim, the customer will be asked to pay the fee. However, the fee can be applied to the cost of repair or against the purchase of a new unit. Likewise the fee can be applied to the cost associated with a non-warranty repair. If our evaluation supports the Warranty Claim, the fee will be waived. Also see Repairs below.

Warranty Claim: » Provide detailed explanation of the problem and why Warranty is claimed. Immediate replacement prior to our evaluation will

require that the customer purchase a new unit. If the warranty claim is validated, a credit will be issued against the new unit purchased. A customer purchase order is required prior to replacement.

» Evaluation fee may apply. If applicable, the fee may be applied to repairing the unit or to the purchase of a new unit.

Repairs (Non-Warranty): » Contact Murphy to receive WR#

» Some products may no longer be accepted for repair. Some, because of their design cannot be repaired, others are uneconomical to repair. In many cases repair parts are/will be available for the customer to make the repair. Your Murphy Sales rep will advise details when the WR# is requested.

» (Preferred but not required) Provide detailed explanation of the problem.

» An estimated repair charge will be available later in 2004 for those products that can be repaired. When an exact cost is required prior to the actual repair, an Evaluation Fee will apply. The fee may be applied toward the final repair cost. A purchase order is required for either the estimated repair charge or the evaluation fee. (Effective date for the Evaluation Fee is January 1, 2005).

» If the actual cost to repair is greater than 65% of the customer’s cost to purchase a new product, we will advise. The customer may then proceed with the repair, purchase a new product, scrap the unit or have it returned as is (at customer’s expense). If the unit is scrapped or returned, an evaluation fee will apply (effective January 1, 2005).

NOTE: The evaluation fee for 2017 is $45 Net (no discount)

Prices are subject to change without notice

MURPHY WARRANTY


2955 West Highway 6 | Hastings, NE 68901

800.752.0888 | 402.463.1531 | 402.463.1313 FAX

Documents

2017 ACCESSORY PRODUCTS CATALOG - Husker … · 2017 accessory products catalog pg 3 table of contents 110v engine heaters