2016 - c.ymcdn.comc.ymcdn.com/.../resmgr/pdfs/2016/PM_BuyersGuide16.pdf · 2016 BUYER'S GUIDE January ... & BROACHING Accu-Prompt, Inc. Scott Hoffmann ... HONING - LAPPING & FINISHING

January | February 2016 PRECISION MANUFACTURING | 132016 BUYER'S GUIDE January | February 2016 PRECISION MANUFACTURING | 132016 BUYER'S GUIDE

Aluminum Coil ....................................... 14Aluminum Extrusion - Plate & Sheet .......................................... 14Assembly ................................................. 14Coil Springs / Wire Forms ................... 14Cold Heading ......................................... 14Cutting Tools .......................................... 14Deburring ................................................ 14Deep Hole Drilling ................................ 14Electrical Discharge Machining ....... 14Fabricating .............................................. 14Foundries & Casting ............................ 14Gear Cutting & Broaching ............................................ 15Heat Treating .......................................... 15Honing - Lapping & Finishing .......... 15

Laser Cutting .......................................... 15Laser Marking ........................................ 15Machine Tool Manufacturer (OEM) ............................ 15Machining - Large Capacity ..... 15 - 16Metal Finishing ..................................... 16Metal Spinning ...................................... 16Micro Machining ................................... 16Milling .............................................. 16 - 18Mold Making .......................................... 18Nanoscale Manufacturing ................. 18Plastic Injection Molding ................... 18Plating / Coatings ................................. 18Powder Coating .................................... 18Precision Grinding ........................ 18 - 19Production Machining ................19 - 20

Prototypes / Short Run .............. 20 - 21Punching ................................................. 21Sawing ...................................................... 21Screw Machining .................................. 21Sheet & Plate Rolling ........................... 21Sheet Metal Fabrication ..................... 21Stamping ................................................. 21Tool & Die ................................................. 21Tooling - Plastic Extrusion .................. 21Tube Bending & Fabrication ............. 21Turning ................................... ......... 21 - 22Turning - Swiss ....................................... 22Water Jet Cutting .................................. 22Welding .....................................................22Welding - Robotic ................................. 22

Abrasives ................................................. 23Automation Integration ..................... 23Calibration - Test & Inspection ......... 23Cleaning Supplies ................................ 23Coolants / Lubricants .......................... 23Cutting Tools .......................................... 23Gauging ........................................... ........ 23Hydraulic / Pneumatics ...................... 23

Lubrication Equipment & Systems ................................................ 23Machine and Electrical Repair ......... 23Machine Tool Sales Chip Cutting ........................ 23 - 24Machine Tool Sales Fabrication ................................... 24Machine Tool Sales (used) ................ 24Metal Service Center ........................... 24

Metrology ................................................ 24 Packaging ................................................ 24Plastic Sheet Rod & Tube ................... 24Robotics / Automation ....................... 24Safety Equipment ................................. 24Supply Sales ........................................... 24Tool Repair / Servicing ........................ 24Workholding .......................................... 24

Accounting ............................................. 25Banking / Financing ............................. 25Capital Equipment Financing .......... 25Computer Software & Training ........ 25Construction .......................................... 25Economic Development .................... 25Employee Benefits ............................... 25

Engineering & Design Services ........ 25Insurance ................................................. 25ISO Certification Services .................. 25Legal .......................................................... 25Mergers & Acquisitions ...................... 25Programming ......................................... 26R&D Tax Credit Consultants .............. 26

Real Estate ............................................... 26Recycling ................................................. 26Retirement Services .............................. 26Shipping & Delivery ............................. 26Staffing ..................................................... 26Technical Colleges / Education ........ 26Wealth Management .......................... 26

MANUFACTURER

DISTRIBUTOR

PROFESSIONAL SERVICES

2016B U Y E R ’ S G U I D E

14 | PRECISION MANUFACTURING January | February 2016 2016 BUYER'S GUIDE

ALUMINUM COILErickson Metals of MN, Inc. Luke Harned (763) 785-2340 [email protected] Metals, Inc. Jason King (651) 545-2877 [email protected]

ALUMINUM EXTRUSION - PLATE & SHEETAlexandria Industries Tom Jensen (800) 568-6601 [email protected] Metals of MN, Inc. Luke Harned (763) 785-2340 [email protected], Inc. Doug Olson (507) 377-5330 [email protected] Steel Supply Company Brandon Walton (612) 333-6868 [email protected] Metals, Inc. Jason King (651) 545-2877 [email protected]

ASSEMBLYAtscott ManufacturingCompany, Inc. John Norris (320) 629-2501 [email protected] International Doug Mulder (507) 387-8063 [email protected] Engr. & Mfg., Inc. Eric Andersen (952) 448-4771 [email protected] Tool & Design Co. Julie Ulrich (763) 784-7400 [email protected] Inc. Heather Bittle (612) 623-6431 [email protected] Corporation Steve Hoaglund (763) 428-2800 [email protected] Manufacturing Company Inc. Steve Carlsen (763) 572-1500 [email protected] Craft Machine &Engineering, Inc. Trisha Mowry (763) 441-1855 [email protected], Inc. John (Sonny) Suserud (507) 386-4058 [email protected] Industries Brenda Chandler (651) 361-7500 [email protected]

TBEI / Crysteel Mfg Joe Paulsen (507) 726-2728 [email protected] Industries Jim Russ (218) 694-3550 [email protected] Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 [email protected], Inc. Christina James (507) 387-2039 [email protected]

COIL SPRINGS / WIRE FORMSWestern Spring Manufacturing Alex Altstatt (651) 224-1721 [email protected]

COLD HEADINGFastenal Manufacturing Tim Borkowski (507) 453-8000 [email protected]

CUTTING TOOLSCommand Tooling Systems LLC Bahti Hanedar (763) 576-6910 [email protected] USA, Inc. Mathieu Tapp (651) 636-8488 [email protected] Industrial ToolGrinding, Inc. Eric Lipke (320) 455-0535 [email protected], Inc. Pat Mullins (763) 780-1420 [email protected]

DEBURRINGArrow Cryogenics, Inc. Curt Salo (763) 780-3367 [email protected] Plating Co. Rusty Ekness (651) 645-0787 [email protected] Finishing Corp. Danforth Messerly (763) 785-9278 [email protected] Reps Mike Neeley (651) 636-6966 [email protected]

DEEP HOLE DRILLINGComet Tool, Inc. Jim Freitag (952) 935-3798 [email protected], Inc. Eric Geyen (763) 479-1133 [email protected]

Sandvik Coromant John Depies (715) 410-1521 [email protected] Science, Inc. Bryce Kleven (763) 425-6001 [email protected] Machine &Gundrilling Co., Inc. Chuck Berg, Jr. (763) 425-3830 [email protected]

ELECTRICAL DISCHARGE MACHININGABA Water Systems, Inc. Tim Weaver (800) 257-1271 [email protected], Inc. Scott Hoffmann (763) 783-1020 [email protected] Tool Company, Inc. Gary Agrimson (763) 566-3446 [email protected] Tool & Machining Company Bruce Hanson (763) 559-0402 [email protected] Micro Machine Eric Nelson (763) 682-6474 [email protected] Randy Squier (763) 576-6946 [email protected] Brothers, Inc. Jeff Brenk (763) 784-5621 [email protected] Technology, Inc. Dale Skoog (763) 424-9677 [email protected] Tool & Automation Dave Ackland (763) 421-0400 [email protected] Tool Company Dale Hanken (763) 425-5005 [email protected] Group Steve Kalina (763) 780-8674 [email protected] Tool Company, Inc. Gary Lostetter (763) 479-3355 [email protected] Machine Inc. Jesse Schelitzche (952) 922-9311 [email protected] Tool, Inc. John Kruse (218) 763-6030 [email protected], Inc. Jon Lee (763) 497-7500 [email protected]

MultiSource Mfg LLC Gary Hadley (952) 456-5550 [email protected] Engineering &Manufacturing Inc. MichaelNepsund (763) 544-9507 [email protected], Inc. Joel Manns (651) 319-7259 [email protected] Science, Inc. Bryce Kleven (763) 425-6001 [email protected] Tool Company Duane Kari (763) 786-0030 [email protected] City EDM & Manufacturing, Inc. Steve Lindell (763) 783-7808 [email protected] Precision Don Zoubek (763) 635-0033 [email protected]

FABRICATINGABA Water Systems, Inc. Tim Weaver (800) 257-1271 [email protected], Inc. Scott Hoffmann (763) 783-1020 [email protected] Tool Company, Inc. Gary Agrimson (763) 566-3446 [email protected] Tool & Machining Company Bruce Hanson (763) 559-0402 [email protected] Micro Machine Eric Nelson (763) 682-6474 [email protected] Randy Squier (763) 576-6946 [email protected] Brothers, Inc. Jeff Brenk (763) 784-5621 [email protected] Technology, Inc. Dale Skoog (763) 424-9677 [email protected] Tool & Automation Dave Ackland (763) 421-0400 [email protected] Tool Company Dale Hanken (763) 425-5005 [email protected] Group Steve Kalina (763) 780-8674 [email protected]

Excelsior Tool Company, Inc. Gary Lostetter (763) 479-3355 [email protected] Machine Inc. Jesse Schelitzche (952) 922-9311 [email protected] Tool, Inc. John Kruse (218) 763-6030 [email protected], Inc. Jon Lee (763) 497-7500 [email protected] Mfg LLC Gary Hadley (952) 456-5550 [email protected] Engineering &Manufacturing Inc. Michael Nepsund (763) 544-9507 [email protected], Inc. Joel Manns (651) 319-7259 [email protected] Science, Inc. Bryce Kleven (763) 425-6001 [email protected] Tool Company Duane Kari (763) 786-0030 [email protected] City EDM &Manufacturing, Inc. Steve Lindell (763) 783-7808 [email protected] Precision Don Zoubek (763) 635-0033 [email protected]

FOUNDRIES & CASTINGCarley Foundry, Inc. Kevin Stensrud (763) 205-8933 [email protected], Pattern & Mold Anthony Cremers (763) 675-3169 [email protected] Iron Castings Mark Maas (507) 345-5018 [email protected] Iron & Machine Ray Van Allen (651) 778-3374 [email protected] Foundry Company Jim Pint (612) 729-9395 [email protected] Die-Casting, Inc. Randy Walters (800) 525-3168 [email protected]

MANUFACTURER

January | February 2016 PRECISION MANUFACTURING | 152016 BUYER'S GUIDE

GEAR CUTTING & BROACHINGAccu-Prompt, Inc. Scott Hoffmann (763) 783-1020 [email protected] Gear Corp. Jim Hill (320) 356-7301 [email protected] PrecisionMachining, Inc. Daniel Meyer (320) 656-1241 [email protected] City Gear Company Max Fenna (763) 780-9780 [email protected] Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 [email protected]

HEAT TREATINGBodycote Thermal Processing Frank Friedmann (952) 944-5500 [email protected] Plating Co. Rusty Ekness (651) 645-0787 [email protected], Inc. Randy Duffy (612) 789-3527 [email protected]

HONING - LAPPING & FINISHINGLake Engineering, Inc. Steve Magnuson (952) 473-5485 [email protected] Grinding, Inc. David Schranck (763) 535-4445 david.schranck@ minnesotagrinding.comMultiSource Mfg LLC Gary Hadley (952) 456-5550 [email protected] City Honing, Inc. Larry Bopp (952) 894-1730 [email protected] Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 [email protected]

LASER CUTTINGAnderson Dahlen, Inc. David Knoll (763) 852-4700 [email protected] ManufacturingCompany, Inc. Tim Fairbanks (651) 674-4441 [email protected], Inc Tom Westphal (507) 833-0229 [email protected]

H & F Manufacturing, Inc. Steve Farniok (763) 493-5606 [email protected] Fabricators, Inc. Sandy Bryant (218) 262-5575 [email protected] Metal, Inc Toby Begnaud (507) 625-4436 [email protected] Services of Blooming Prairie, Inc. Dennis Heimerman (507) 583-2144 [email protected] Laser Farid Currimbhoy (320) 485-5458 [email protected] Steel, Inc. Tom Ehlers (763) 544-7100 [email protected] ManufacturingCorporation John Johnston (763) 588-0536 [email protected] Machine, Inc. Lori Tapani (651) 462-4156 [email protected]

LASER MARKING401 Manufacturing Inc. Mike Anderson (763) 205-9040 [email protected] Cryogenics, Inc. Curt Salo (763) 780-3367 [email protected] Connectivity Solutions Jeff Norell (507) 833-6515 [email protected] Midwest Craig Hahne (763) 424-5622 [email protected] Machine of IA, Inc. MN Div. Tim Greene (763) 560-3955 [email protected]

MACHINE TOOL MANUFACTURER (OEM)Condux International Doug Mulder (507) 387-8063 [email protected]/F Machine Specialties, Inc. Steve Moerke (507) 625-6200 [email protected]&J Machine, Inc. John Lenz (763) 421-0114 [email protected] Machinery USA Craig St. John (651) 289-9700 [email protected]

Midwest Industrial Tool Grinding, Inc. Eric Lipke (320) 455-0535 [email protected] CNC Machines Sara Dvorak (952) 442-1410 [email protected] Tool Technologies, Inc. Jim Goerges (218) 454-0434 [email protected], Inc. Christina James (507) 387-2039 [email protected]

MACHINING - LARGE CAPACITYAitkin Iron Works, Inc. Jeffrey Chatelle (218) 927-2400 [email protected] Dahlen, Inc. David Knoll (763) 852-4700 [email protected] Tooling Division Craig Rix (952) 469-2423 [email protected] Engr. & Mfg., Inc. Eric Andersen (952) 448-4771 [email protected]

Hutchinson Manufacturing, Inc. Tom Daggett (320) 587-4653 [email protected] Machine LLC Bill Russell (952) 448-5544 [email protected] Engineering Russell Scheller (507) 625-4011 [email protected] Manufacturing Company Inc. Steve Carlsen (763) 572-1500 [email protected]

MANUFACTURER

Cutting Toolsand Shop Supplies

3601 29th Avenue NE • Minneapolis, MN 55418 • www.walterhammond.com

Same Day Delivery ServiceLarge Inventory of Cutting ToolsVending & Integrated Supply Programs

• Abrasives • Cutting Tools• Gages • Shop Supplies• Precision Tools • Vending


MANUFACTURER

MACHINING - LARGE CAPACITY CONTINUEDMachining Technology Laurent Deconinck (763) 571-1771 ldeconinck@ machining-technology.comNETTwork Mfg. Inc. Aaron Netter (320) 654-8352 [email protected] Steel, Inc. Tom Ehlers (763) 544-7100 [email protected] Precision Machine, Inc. Tom Olson (763) 586-9651 [email protected] Engineering Corp. Mike Albers (612) 788-9123 [email protected] Industries Jim Russ (218) 694-3550 [email protected] Industries, Inc. Benjamin Rashleger (763) 295-9202 [email protected]

METAL FINISHINGArrow Cryogenics, Inc. Curt Salo (763) 780-3367 [email protected]

CAB Construction Karla Hansen (507) 625-2233 [email protected] Plating Co. Rusty Ekness (651) 645-0787 [email protected] Mark Hockley (651) 780-3202 [email protected] & B Plating Company Vince Wheeler (763) 784-8038 [email protected] Finishing Corp. Danforth Messerly (763) 785-9278 [email protected] Chrome, Inc. Dick Walters (612) 788-9451 [email protected] Parts Inc. Robert Nichols (651) 452-1017 [email protected] Coating Technologies, Inc. Kent Kienitz (763) 559-4779 [email protected] Coatings, Inc. Linda Grundtner (651) 641-0878 [email protected]

Twin City Plating Company Ben Minger (612) 331-8895 [email protected] Co., Inc. Kurt Weamer (651) 636-0720 [email protected]

METAL SPINNINGGlenn Metalcraft, Inc. Joseph Glenn (763) 389-5355 [email protected]

MICRO MACHININGAccu-Prompt, Inc. Scott Hoffmann (763) 783-1020 [email protected] Micro Machine Eric Nelson (763) 682-6474 [email protected] Machine &Manufacturing Inc. Carrie Betland (763) 231-8400 [email protected] Machine Steve Swain (763) 572-0662 [email protected] Technology, Inc. Dale Skoog (763) 424-9677 [email protected]

Micro-Matics Inc. Rick Paulson (763) 780-2700 [email protected], Inc. Jon Lee (763) 497-7500 [email protected] Industries Darlene Miller (952) 894-7231 [email protected] Lee Zachman (763) 786-1520 [email protected]

MILLING401 Manufacturing Inc. Mike Anderson (763) 205-9040 [email protected] Engineering Todd Craft (763) 786-8710 [email protected] Cutter Grinding, Inc. Kyle Anderson (763) 314-0255 [email protected] Engineering David Myren (651) 220-1339 [email protected] Automatics, Inc. Doug Anderson (763) 533-2206 [email protected]

Applied Vacuum Technologies, Inc. Perry Henderson (952) 442-7005 [email protected] CNC Inc. Brian Mayo (507) 931-5425 [email protected] Machine & Tool Inc. Jay Groth (763) 535-2204 [email protected] Manufacturing Co. Mike Bizal, Jr. (763) 571-4030 [email protected] Machine Corporation Tom Chacon (763) 786-0100 [email protected] Tool & Machining Angela Bowman (507) 286-1400 [email protected] Brothers, Inc. Jeff Brenk (763) 784-5621 [email protected] Screw Machine Products Company Steve Wise (763) 535-0501 [email protected] Inc. Jeff Haley (763) 478-8982 [email protected]

YOUR LOCAL CONTACT INFORMATION:

ELLISON TECHNOLOGIES IS THE NEW DOOSAN

DISTRIBUTOR FOR MINNESOTA, WESTERN WISCONSIN,

NORTH & SOUTH DAKOTA.

We are here to support Doosan machine tool products, services and spare parts.

Sales: (763)545-9699 | Service: (763)656-5126

Parts: (888) 207-2787

WWW.ELLISONTECHNOLOGIES.COM


MANUFACTURER

Challenge Machine &Manufacturing Inc. Carrie Betland (763) 231-8400 [email protected] Precision, Inc. Manfred Niedernhoefer (651) 633-4566 [email protected] Precision Machine Corp. Gilbert Baldwin (952) 890-1003 [email protected] Tool, Inc. Jim Freitag (952) 935-3798 [email protected] Tooling Systems LLC Bahti Hanedar (763) 576-6910 [email protected], Pattern & Mold Anthony Cremers (763) 675-3169 [email protected] Mold & Design Bruce Cerepak (763) 535-2334 [email protected] Machine Inc. Jeff Dahlquist (763) 755-7575 [email protected], Inc. Eric Geyen (763) 479-1133 [email protected]

Digital Tool & Automation Dave Ackland (763) 421-0400 [email protected] Engineering LLC Don Hickerson (507) 281-0275 [email protected] Tool Company, Inc. Gary Lostetter (763) 479-3355 [email protected] Manufacturing Tim Borkowski (507) 453-8000 [email protected] Machine, Inc. Mike Parker (763) 444-3725 [email protected] Machine, Inc. Scott Ness (651) 777-4511 [email protected] Machine Company Steve Kingdon (763) 566-3792 [email protected] Machine Inc. Jesse Schelitzche (952) 922-9311 [email protected] PrecisionMachining, Inc. Daniel Meyer (320) 656-1241 [email protected]

K & G Manufacturing Co. Bob Basiago (507) 334-5501 [email protected] Electronics Repair & Assembly Tom Korin (612) 889-6435 [email protected] Manufacturing Company Inc. Steve Carlsen (763) 572-1500 [email protected] Machine Shop, Inc. Joe LaBonne (763) 434-6108 [email protected] Engineering, Inc. Steve Magnuson (952) 473-5485 [email protected] Tool & Engineering, Inc. Marty Sweerin (763) 422-8866 [email protected] Engineering Corp. Jennifer Salisbury (612) 721-2471 [email protected] Technologies, Inc. Susan Dubay (763) 428-4229 [email protected] CAM Solutions, Inc. Richard Lord (763) 560-6567 [email protected]

MultiSource Mfg LLC Gary Hadley (952) 456-5550 [email protected] Ulm Precision Tool, Inc. Paul Huseby (507) 233-2900 [email protected] Components, Inc. Jarmo Kumpula (320) 234-6015 [email protected] Iron & Machine Ray Van Allen (651) 778-3374 [email protected] Screw Products, Inc. James Martinson (763) 753-3628 [email protected] Aerospace Gary Corradi (218) 720-2920 [email protected] Tool & Manufacturing, Inc. Michael Goerges (218) 568-8069 [email protected] Products Corporation Darrell Freitag (612) 522-2141 [email protected] Tool &Manufacturing, Inc. Mark Boesch (763) 559-5746 [email protected]

QDP Technologies, Inc. Troy Holien (763) 712-1626 [email protected] Machine of IA, Inc. MN Div. Tim Greene (763) 560-3955 [email protected] Remmele Medical Al Germscheid (763) 263-2636 [email protected] Coromant John Depies (715) 410-1521 [email protected], Inc. Joel Manns (651) 319-7259 [email protected] Machine, Inc. Rick Taylor (763) 786-5949 [email protected] Plastics, Inc. Pat McCready (763) 784-0240 [email protected] City EDM &Manufacturing, Inc. Steve Lindell (763) 783-7808 [email protected], Inc. Nicole Ellos (763) 271-5200 [email protected]

©2016 Midwest CAM Solutions

QUALITY tooling and cutting fluids with SERVICE and technical support are in more than our name. They are what Q & S has built our reputation

on as an industrial distributor for 50 years.

Call 952.935.8616 or visit us at www.qandsmachinetool.com

Q&S Machine Tool Co.


MANUFACTURER

MILLING CONTIUEDVon Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 [email protected] Machine, Inc. Mike Yeager (952) 467-2800 [email protected] Precision Don Zoubek (763) 635-0033 [email protected]

MOLD MAKINGA-1 Engineering Todd Craft (763) 786-8710 [email protected] Healthcare Packaging, Inc. LeighAsleson (507) 625-1131 [email protected] Foundry, Inc. Kevin Stensrud (763) 205-8933 [email protected] Mold & Design Bruce Cerepak (763) 535-2334 [email protected] Group Steve Kalina (763) 780-8674 [email protected]

Excelsior Tool Company, Inc. Gary Lostetter (763) 479-3355 [email protected], Inc. Jon Lee (763) 497-7500 [email protected] Tool and Die Corp. Mike Gramse (507) 334-1847 [email protected], Inc. Walter Waffensmith (763) 535-4240 [email protected] Tool Technologies, Inc. Jim Goerges (218) 454-0434 [email protected] Molding LLC Tom Caron (651) 464-3900 [email protected] Science, Inc. Bryce Kleven (763) 425-6001 [email protected], LLC Allen Mishek (651) 653-0400 [email protected]

NANOSCALE MANUFACTURINGTeamvantage Molding LLC Tom Caron (651) 464-3900 [email protected]

PLASTIC INJECTION MOLDINGAlexandria Industries Tom Jensen (800) 568-6601 [email protected] Tool & Engineering, Inc. Kent Smith (218) 924-4024 [email protected] Group Steve Kalina (763) 780-8674 [email protected] Tool & Engineering, Inc. Marty Sweerin (763) 422-8866 [email protected] Valve Company, a Div. of Specialty Mfg. Chad Gregoire (320) 564-4279 [email protected] Tool Technologies, Inc. Jim Goerges (218) 454-0434 [email protected] Lee Zachman (763) 786-1520 [email protected] Molding LLC Tom Caron (651) 464-3900 [email protected] Plastics, Inc. Pat McCready (763) 784-0240 [email protected]

VistaTek, LLC Allen Mishek (651) 653-0400 [email protected]

PLATING / COATINGSCo-Operative Plating Co. Rusty Ekness (651) 645-0787 [email protected] Mark Hockley (651) 780-3202 [email protected] & B Plating Company Vince Wheeler (763) 784-8038 [email protected] Chrome, Inc. Dick Walters (612) 788-9451 [email protected] Rob Clark (763) 717-7016 [email protected] Parts Inc. Robert Nichols (651) 452-1017 [email protected] Coatings, Inc. Linda Grundtner (651) 641-0878 [email protected] City Plating Company Ben Minger (612) 331-8895 [email protected]

Ursa Major Dennis Stoffels (651) 462-4721 [email protected] Co., Inc. Kurt Weamer (651) 636-0720 [email protected]

POWDER COATINGCurtiss-Wright Mark Hockley (651) 780-3202 [email protected] Manufacturing Company John Huot (651) 646-1869 [email protected] Coating Technologies, Inc. Kent Kienitz (763) 559-4779 [email protected]

PRECISION GRINDINGAce Cutter Grinding, Inc. Kyle Anderson (763) 314-0255 [email protected] Tool Company, Inc. Gary Agrimson (763) 566-3446 [email protected] Tool & Machining Company Bruce Hanson (763) 559-0402 [email protected]


MANUFACTURER

Castle Metals Dave Brown (763) 784-6866 [email protected], Inc. Eric Geyen (763) 479-1133 [email protected] USA, Inc. Mathieu Tapp (651) 636-8488 [email protected] Enterprises, Inc. Steve LaMott (763) 781-0001 [email protected] Grinding, Inc. David Schranck (763) 535-4445 [email protected] Swiss-Matic, LLC Wade Halseth (763) 544-4222 [email protected] Grinding, Inc. Jan Stern (763) 571-1052 [email protected] Coatings, Inc. Linda Grundtner (651) 641-0878 [email protected] InstrumentsCompany, Inc. Paul Arneson (952) 933-1222 [email protected]

Qualitek Engineering & Manufacturing Inc. Michael Nepsund (763) 544-9507 [email protected] Associates, Inc. Dale Peterson (763) 717-0773 [email protected] City Gear Company Max Fenna (763) 780-9780 [email protected] Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 [email protected]

PRODUCTION MACHININGAce Cutter Grinding, Inc. Kyle Anderson (763) 314-0255 [email protected] Iron Works, Inc. Jeffrey Chatelle (218) 927-2400 [email protected] Industries Tom Jensen (800) 568-6601 [email protected] Manufacturing Inc Alesha Sacco (507) 625-1515 [email protected]

Andrew Tool & Machining Company Bruce Hanson (763) 559-0402 [email protected] ManufacturingCompany, Inc. John Norris (320) 629-2501 [email protected] Tool & Machine, Inc. Dan Batten (952) 942-9198 [email protected] Machine & Tool Inc. Jay Groth (763) 535-2204 [email protected] Machine Corporation Tom Chacon (763) 786-0100 [email protected] Tool & Machining Angela Bowman (507) 286-1400 [email protected] Inc. Jeff Haley (763) 478-8982 [email protected] Precision, Inc. Manfred Niedernhoefer (651) 633-4566 [email protected] Connectivity Solutions Jeff Norell (507) 833-6515 [email protected]

CNH Machine Steve Swain (763) 572-0662 [email protected] Gear Corp. Jim Hill (320) 356-7301 [email protected] Engr. & Mfg., Inc. Eric Andersen (952) 448-4771 [email protected] Tool & Automation Dave Ackland (763) 421-0400 [email protected] Engineering LLC Don Hickerson (507) 281-0275 [email protected] Iron Castings Mark Maas (507) 345-5018 [email protected] Tool Company Dale Hanken (763) 425-5005 [email protected] Finishing Corp. Danforth Messerly (763) 785-9278 [email protected] Company Randy Vargason (507) 413-0933 [email protected]

Graco Inc. Heather Bittle (612) 623-6431 [email protected] Machine, Inc. Mike Parker (763) 444-3725 [email protected] Machine, Inc. Scott Ness (651) 777-4511 [email protected] Machine Company Steve Kingdon (763) 566-3792 [email protected] PrecisionMachining, Inc. Daniel Meyer (320) 656-1241 [email protected] Companies, Inc. Lou Cowart (763) 559-0033 [email protected]&J Machine, Inc. John Lenz (763) 421-0114 [email protected] Manufacturing, Inc. Gene Wehner (763) 425-7995 [email protected] Machine LLC Bill Russell (952) 448-5544 [email protected]

5400 Douglas Dr. N, Crystal, MN 55429 // 888.332.8452 // 763.535.4445


MANUFACTURER

PRODUCTION MACHINING CONTINUEDK & G Manufacturing Co. Bob Basiago (507) 334-5501 [email protected] Manufacturing Company Inc. Steve Carlsen (763) 572-1500 [email protected] Machine Shop, Inc. Joe LaBonne (763) 434-6108 [email protected] Enterprises, Inc. Steve LaMott (763) 781-0001 [email protected], Inc. Doug Olson (507) 377-5330 [email protected] Valve Company, a Div. of Specialty Mfg. Chad Gregoire (320) 564-4279 [email protected] Craft Machine &Engineering, Inc. Trisha Mowry (763) 441-1855 [email protected], Inc. John (Sonny) Suserud (507) 386-4058 [email protected]

Midland Technologies, Inc. Susan Dubay (763) 428-4229 [email protected] Tool and Die Corp. Mike Gramse (507) 334-1847 [email protected] Mfg. Inc. Aaron Netter (320) 654-8352 [email protected] Components, Inc. Jarmo Kumpula (320) 234-6015 [email protected], Inc. Pat Mullins (763) 780-1420 [email protected] Hannifin Carsa Spaude (507) 233-2305 [email protected] Industries Darlene Miller (952) 894-7231 [email protected] Products Corporation Darrell Freitag (612) 522-2141 [email protected] Tool & Manufacturing, Inc. Mark Boesch (763) 559-5746 [email protected]

Roberts Automatic Products, Inc. Ted Roberts (952) 567-2868 [email protected] Industries Jim Russ (218) 694-3550 [email protected] Die-Casting, Inc. Randy Walters (800) 525-3168 [email protected] Specialty Manufacturing Company Ed Greene (651) 653-0599 [email protected] Major Dennis Stoffels (651) 462-4721 [email protected] Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 [email protected], Inc. Tim Wenzel (507) 835-3495 [email protected] Industries, Inc. Benjamin Rashleger (763) 295-9202 [email protected] Machine, Inc. Lori Tapani (651) 462-4156 [email protected]

Yeager Machine, Inc. Mike Yeager (952) 467-2800 [email protected] Precision Don Zoubek (763) 635-0033 [email protected]

PROTOTYPES / SHORT RUNAeroSystems Engineering David Myren (651) 220-1339 [email protected] Iron Works, Inc. Jeffrey Chatelle (218) 927-2400 [email protected] Tool & Machine, Inc. Dan Batten (952) 942-9198 [email protected] Machine &Manufacturing Inc. Carrie Betland (763) 231-8400 [email protected] Precision Machine Corp. Gilbert Baldwin (952) 890-1003 [email protected], Pattern & Mold Anthony Cremers (763) 675-3169 [email protected]

D & B Plating Company Vince Wheeler (763) 784-8038 [email protected] Machine Inc. Jeff Dahlquist (763) 755-7575 [email protected] Tool & Design Co. Julie Ulrich (763) 784-7400 [email protected] Companies, Inc. Lou Cowart (763) 559-0033 [email protected]&J Machine, Inc. John Lenz (763) 421-0114 [email protected] Manufacturing, Inc. Gene Wehner (763) 425-7995 [email protected] Machine LLC Bill Russell (952) 448-5544 [email protected] Tool & Engineering, Inc. Tom Murphy (763) 427-6275 [email protected] Craft Machine &Engineering, Inc. Trisha Mowry (763) 441-1855 [email protected]

www.csmp.com | 763-535-0501 | Precision Parts Since 1945

QUALITY… THAT’S HOW WE SPIN IT

Ross GreenwaldCass Employee

Since 2002

I MAKE PARTS FOR

POLARISSNOWMOBILES.DOES THAT MEANI CAN WRITE OFF MY SLED?


MICO, Inc. John (Sonny) Suserud (507) 386-4058 [email protected] Inc. Rick Paulson (763) 780-2700 [email protected] Mfg LLC Gary Hadley (952) 456-5550 [email protected] Ulm Precision Tool, Inc. Paul Huseby (507) 233-2900 [email protected] InstrumentsCompany, Inc. Paul Arneson (952) 933-1222 [email protected] Foundry Company Jim Pint (612) 729-9395 [email protected], LLC Allen Mishek (651) 653-0400 [email protected] Spring Manufacturing Alex Altstatt (651) 224-1721 [email protected]

PUNCHINGDMS Corporation Derek Nichols (651) 452-1017 [email protected] Tool International Brian Robinson (651) 286-6000 [email protected]

SAWINGCastle Metals Dave Brown (763) 784-6866 [email protected] Engineering Plastics, Inc. Scott King (952) 641-6300 [email protected] Services of BloomingPrairie, Inc. Dennis Heimerman (507) 583-2144 [email protected] Steel Supply Company Brandon Walton (612) 333-6868 [email protected] International Paul Carter (952) 934-2303 [email protected] Technologies, Inc. Troy Holien (763) 712-1626 [email protected] Pipe Fabrication Chris Muntz (763) 428-2259 [email protected]

SCREW MACHININGAnderson Automatics, Inc. Doug Anderson (763) 533-2206 [email protected]

Cass Screw Machine Products Company Steve Wise (763) 535-0501 [email protected] Connectivity Solutions Jeff Norell (507) 833-6515 [email protected] Manufacturing Company Inc. Steve Carlsen (763) 572-1500 [email protected] Screw Products, Inc. James Martinson (763) 753-3628 [email protected] Swiss-Matic, LLC Wade Halseth (763) 544-4222 [email protected] Automatic Products, Inc. Ted Roberts (952) 567-2868 [email protected] City EDM &Manufacturing, Inc. Steve Lindell (763) 783-7808 [email protected], Inc. Tim Wenzel (507) 835-3495 [email protected]

SHEET & PLATE ROLLINGAgrimson Tool Company, Inc. Gary Agrimson (763) 566-3446 [email protected] Services of BloomingPrairie, Inc. Dennis Heimerman (507) 583-2144 [email protected]

SHEET METAL FABRICATIONAnderson Dahlen, Inc. David Knoll (763) 852-4700 [email protected] ManufacturingCompany, Inc. John Norris (320) 629-2501 [email protected], Inc Tom Westphal (507) 833-0229 [email protected] Rogers of Minnesota, LLC John Madsen (763) 717-6340 [email protected] Fabricating LLC Mike Rott (320) 632-2322 [email protected] Company Randy Vargason (507) 413-0933 [email protected] & F Manufacturing, Inc. Steve Farniok (763) 493-5606 [email protected]

Hibbing Fabricators, Inc. Sandy Bryant (218) 262-5575 [email protected] Manufacturing Company John Huot (651) 646-1869 [email protected] Corporation Steve Hoaglund (763) 428-2800 [email protected] FabricationServices, Inc. Matt Doherty (507) 726-6000 [email protected] Metal, Inc Toby Begnaud (507) 625-4436 [email protected] Laser Farid Currimbhoy (320) 485-5458 [email protected] Tool & Manufacturing, Inc. Michael Goerges (218) 568-8069 [email protected] - Vero Software Doug Wood (651) 982-0100 [email protected] Manufacturing Corporation John Johnston (763) 588-0536 [email protected] / Crysteel Mfg Joe Paulsen (507) 726-2728 [email protected] Tool International Brian Robinson (651) 286-6000 [email protected] Machine, Inc. Lori Tapani (651) 462-4156 [email protected]

STAMPINGAmeriStar Manufacturing Inc Alesha Sacco (507) 625-1515 [email protected] Manufacturing Company, Inc. Tim Fairbanks (651) 674-4441 [email protected] Tooling Division Craig Rix (952) 469-2423 [email protected] Rogers of Minnesota, LLC John Madsen (763) 717-6340 [email protected] Corporation Derek Nichols (651) 452-1017 [email protected] Air Metal Stamping LLC Brad Severson (763) 546-0994 [email protected] Tool & Engineering, Inc. Tom Murphy (763) 427-6275 [email protected]

MRG Tool and Die Corp. Mike Gramse (507) 334-1847 [email protected] Specialty Manufacturing Company Ed Greene (651) 653-0599 [email protected] Engineering Company Tim Aberwald (763) 533-1501 [email protected] Tool Company Duane Kari (763) 786-0030 [email protected] Spring Manufacturing Alex Altstatt (651) 224-1721 [email protected] Tool International Brian Robinson (651) 286-6000 [email protected]

TOOL & DIEAutomated Randy Squier (763) 576-6946 [email protected] ManufacturingCompany, Inc. Tim Fairbanks (651) 674-4441 [email protected] Tooling Division Craig Rix (952) 469-2423 [email protected] Technology, Inc. Dale Skoog (763) 424-9677 [email protected] Corporation Derek Nichols (651) 452-1017 [email protected] Tool Company Dale Hanken (763) 425-5005 [email protected] Inc. Heather Bittle (612) 623-6431 [email protected] Air Metal Stamping LLC Brad Severson (763) 546-0994 [email protected] Precision Tooling Joe Schneider (763) 421-0230 [email protected] Ulm Precision Tool, Inc. Paul Huseby (507) 233-2900 [email protected], Inc. Walter Waffensmith (763) 535-4240 [email protected] InstrumentsCompany, Inc. Paul Arneson (952) 933-1222 [email protected]

Qualitek Engineering &Manufacturing Inc. Michael Nepsund (763) 544-9507 [email protected] Tool Company Duane Kari (763) 786-0030 [email protected]

TOOLING - PLASTIC EXTRUSIONAutomated Randy Squier (763) 576-6946 [email protected]

TUBE BENDING & FABRICATIONMetal Services of BloomingPrairie, Inc. Dennis Heimerman (507) 583-2144 [email protected]

TURNING401 Manufacturing Inc. Mike Anderson (763) 205-9040 [email protected] Engineering David Myren (651) 220-1339 [email protected] Vacuum Technologies, Inc. Perry Henderson (952) 442-7005 [email protected] CNC Inc. Brian Mayo (507) 931-5425 [email protected] Tool & Machine, Inc. Dan Batten (952) 942-9198 [email protected] Machine & Tool Inc. Jay Groth (763) 535-2204 [email protected] Manufacturing Co. Mike Bizal, Jr. (763) 571-4030 [email protected] Machine Corporation Tom Chacon (763) 786-0100 [email protected] Tool & Machining Angela Bowman (507) 286-1400 [email protected] Brothers, Inc. Jeff Brenk (763) 784-5621 [email protected] Screw Machine Products Company Steve Wise (763) 535-0501 [email protected] Inc. Jeff Haley (763) 478-8982 [email protected] Gear Corp. Jim Hill (320) 356-7301 [email protected]

MANUFACTURER


TURNING CONTINUEDColumbia Precision Machine Corp. Gilbert Baldwin (952) 890-1003 [email protected] Tool, Inc. Jim Freitag (952) 935-3798 [email protected] Tooling Systems LLC Bahti Hanedar (763) 576-6910 [email protected] Machine Inc. Jeff Dahlquist (763) 755-7575 [email protected] Manufacturing Tim Borkowski (507) 453-8000 [email protected] Machine, Inc. Mike Parker (763) 444-3725 [email protected] Machine, Inc. Scott Ness (651) 777-4511 [email protected] Corporation Steve Hoaglund (763) 428-2800 [email protected] Machine Inc. Jesse Schelitzche (952) 922-9311 [email protected] PrecisionMachining, Inc. Daniel Meyer (320) 656-1241 [email protected] Manufacturing, Inc. Gene Wehner (763) 425-7995 [email protected] & G Manufacturing Co. Bob Basiago (507) 334-5501 [email protected] Electronics Repair & Assembly Tom Korin (612) 889-6435 [email protected] Manufacturing Company Inc. Steve Carlsen (763) 572-1500 [email protected] Engineering, Inc. Steve Magnuson (952) 473-5485 [email protected] Technology Laurent Deconinck (763) 571-1771 ldeconinck@ machining-technology.comMack Engineering Corp. Jennifer Salisbury (612) 721-2471 [email protected] Technologies, Inc. Susan Dubay (763) 428-4229 [email protected]

MultiSource Mfg LLC Gary Hadley (952) 456-5550 [email protected] Components, Inc. Jarmo Kumpula (320) 234-6015 [email protected] Iron & Machine Ray Van Allen (651) 778-3374 [email protected] Aerospace Gary Corradi (218) 720-2920 [email protected] Precision Machine, Inc. Tom Olson (763) 586-9651 [email protected] Tool & Manufacturing, Inc. Michael Goerges (218) 568-8069 [email protected] Products Corporation Darrell Freitag (612) 522-2141 [email protected] Tool &Manufacturing, Inc. Mark Boesch (763) 559-5746 [email protected] Technologies, Inc. Troy Holien (763) 712-1626 [email protected] Remmele Medical Al Germscheid (763) 263-2636 [email protected] Coromant John Depies (715) 410-1521 [email protected] Machine, Inc. Rick Taylor (763) 786-5949 [email protected] Plastics, Inc. Pat McCready (763) 784-0240 [email protected], Inc. Nicole Ellos (763) 271-5200 [email protected] Major Dennis Stoffels (651) 462-4721 [email protected] Pipe Fabrication Chris Muntz (763) 428-2259 [email protected] Ruden Manufacturing, Inc. Brandon Anderson (763) 682-3122 [email protected] Industries, Inc. Benjamin Rashleger (763) 295-9202 [email protected] Machine, Inc. Mike Yeager (952) 467-2800 [email protected]

ZTECH Precision Don Zoubek (763) 635-0033 [email protected]

TURNING - SWISSA-1 Engineering Todd Craft (763) 786-8710 [email protected] Automatics, Inc. Doug Anderson (763) 533-2206 [email protected] Precision, Inc. Manfred Niedernhoefer (651) 633-4566 [email protected] Machine Steve Swain (763) 572-0662 [email protected] Tooling Systems LLC Bahti Hanedar (763) 576-6910 [email protected] Mold & Design Bruce Cerepak (763) 535-2334 [email protected] Machine Company Steve Kingdon (763) 566-3792 [email protected] Machine Shop, Inc. Joe LaBonne (763) 434-6108 [email protected] Enterprises, Inc. Steve LaMott (763) 781-0001 [email protected] Engineering Corp. Jennifer Salisbury (612) 721-2471 [email protected] Valve Company, a Div. of Specialty Mfg. Chad Gregoire (320) 564-4279 [email protected] Inc. Rick Paulson (763) 780-2700 [email protected] CAM Solutions, Inc. Richard Lord (763) 560-6567 [email protected] Grinding, Inc. David Schranck (763) 535-4445 david.schranck@ minnesotagrinding.comMultiSource Mfg LLC Gary Hadley (952) 456-5550 [email protected] Screw Products, Inc. James Martinson (763) 753-3628 [email protected] Swiss-Matic, LLC Wade Halseth (763) 544-4222 [email protected] Industries Darlene Miller (952) 894-7231 [email protected]

Production Tool & Manufacturing, Inc. Mark Boesch (763) 559-5746 [email protected] Machine of IA, Inc. MN Div. Tim Greene (763) 560-3955 [email protected] Lee Zachman (763) 786-1520 [email protected] Automatic Products, Inc. Ted Roberts (952) 567-2868 [email protected] Remmele Medical Al Germscheid (763) 263-2636 [email protected] Specialty Manufacturing Company Ed Greene (651) 653-0599 [email protected], Inc. Nicole Ellos (763) 271-5200 [email protected], Inc. Tim Wenzel (507) 835-3495 [email protected]

WATER JET CUTTINGABA Water Systems, Inc. Tim Weaver (800) 257-1271 [email protected] Dahlen, Inc. David Knoll (763) 852-4700 [email protected] Manufacturing Co. Mike Bizal, Jr. (763) 571-4030 [email protected] Edge, Inc. Nancy Lauseng (763) 497-8700 [email protected] Waterjet, Inc. Doug Leaser (763) 427-9200 [email protected]

WELDINGAnderson Dahlen, Inc. David Knoll (763) 852-4700 [email protected] Vacuum Technologies, Inc. Perry Henderson (952) 442-7005 [email protected] Construction Karla Hansen (507) 625-2233 [email protected], Inc Tom Westphal (507) 833-0229 [email protected] Todd McChesney (763) 441-1581 [email protected]

Falls Fabricating LLC Mike Rott (320) 632-2322 [email protected] Company Randy Vargason (507) 413-0933 [email protected] Manufacturing, Inc. Tom Daggett (320) 587-4653 [email protected] Fabrication Services, Inc. Matt Doherty (507) 726-6000 [email protected] Engineering Russell Scheller (507) 625-4011 [email protected] Services of Blooming Prairie, Inc. Dennis Heimerman (507) 583-2144 [email protected] Industries Brenda Chandler (651) 361-7500 [email protected] Aerospace Gary Corradi (218) 720-2920 [email protected] Precision Machine, Inc. Tom Olson (763) 586-9651 [email protected] Engineering Corp. Mike Albers (612) 788-9123 [email protected] / Crysteel Mfg Joe Paulsen (507) 726-2728 [email protected] Pipe Fabrication Chris Muntz (763) 428-2259 [email protected]

WELDING - ROBOTICD/F Machine Specialties, Inc. Steve Moerke (507) 625-6200 [email protected] County Technical College Larry Lewis (651) 423-8276 [email protected] Todd McChesney (763) 441-1581 [email protected] & F Manufacturing, Inc. Steve Farniok (763) 493-5606 [email protected] Laser Farid Currimbhoy (320) 485-5458 [email protected] Robotics Scott Nelson (763) 450-4381 [email protected]

MANUFACTURER


ABRASIVESAbrasive Specialists, Inc. Jaime Olsen (763) 571-4111 [email protected] & Sewall Industrial Supply Steve Olson (612) 331-6170 [email protected] Industrial, St. Cloud Division Ken Voigt (320) 253-1020 [email protected] McGowan, Inc. Brian Semroska (320) 252-5292 [email protected] Tool Supply Co. Kevin Corrigan (763) 537-7762 [email protected] Tool Solutions Brett Wharton (952) 432-2484 [email protected] & Service Machine Tool Company Bill Lidfors (952) 935-8616 [email protected], Inc. Tom Folska (952) 941-9150 [email protected]. & R.S. Mars Company Bob Mars (952) 884-9388 [email protected]

AUTOMATION INTEGRATIONBaillie Sales & Engineering, Inc. Mark Baillie (952) 546-2960 [email protected] McGowan, Inc. Brian Semroska (320) 252-5292 [email protected] Tool Supply Co. Kevin Corrigan (763) 537-7762 [email protected] MORI Ellison Technologies Dale Mortier (763) 545-9699 [email protected] Machine Tool LLC Rolf Biekert (612) 886-3386 [email protected]/mation Mark Felts (651) 605-3300 [email protected] Robotics Scott Nelson (763) 450-4381 [email protected] Inc Greg Buck (763) 476-8600 [email protected] Mark Wernimont (763) 559-2590 [email protected]

V-TEK, Inc. Christina James (507) 387-2039 [email protected]

CALIBRATION - TEST & INSPECTIONAlliance Metrology, Inc. Bryn Hartwig (763) 493-0026 [email protected] Sales & Engineering, Inc. Mark Baillie (952) 546-2960 [email protected] Valley Metrology Julie Moravec (715) 483-5334 [email protected]. B. Testing, Inc. Jeff Boisvert (763) 795-9690 [email protected] Precision Don Martin (651) 484-6544 [email protected] Jamie Durand (763) 784-1704 [email protected] Quality Inc/Advanced Inspection Services LLC Keith Summers (763) 249-8130 [email protected] Machinery, Inc. Tom Drazkowski (651) 778-8887 [email protected] Standards Lab, Inc. James Dolezal (612) 823-2616 [email protected], Inc. Christina James (507) 387-2039 [email protected]

CLEANING SUPPLIESCastrol Industrial NA Jim Walker (612) 212-9783 [email protected]

COOLANTS / LUBRICANTSAbrasive Specialists, Inc. Jaime Olsen (763) 571-4111 [email protected] Industrial NA Jim Walker (612) 212-9783 [email protected] Management Incorporated RogerNovitzki (612) 378-2580 [email protected] Technologies, Inc. Luke Bame (651) 636-7990 [email protected] Solutions of MN Inc. Jim Lemons (651) 294-7790 [email protected]

Productivity Inc Greg Buck (763) 476-8600 [email protected] & Service Machine Tool Company Bill Lidfors (952) 935-8616 [email protected], Inc. Tom Folska (952) 941-9150 [email protected]

CUTTING TOOLSBlackHawk Industrial, St. Cloud Division Ken Voigt (320) 253-1020 [email protected] Olson Sales Co., Inc. Clinton Olson (612) 722-9523 [email protected] Tool Supply Co. Kevin Corrigan (763) 537-7762 [email protected] Andrew Skoog (612) 804-1143 [email protected] Tool Solutions Brett Wharton (952) 432-2484 [email protected] Tool Supply Corp. Troy Kerin (651) 452-4400 [email protected] Solutions of MN Inc. Jim Lemons (651) 294-7790 [email protected] Machine Tool Supply Doug Eliason (763) 571-3550 [email protected] Inc Greg Buck (763) 476-8600 [email protected] & Service Machine Tool Company Bill Lidfors (952) 935-8616 [email protected], Inc. Tom Folska (952) 941-9150 [email protected] (Scientific Cutting Tools) Todd White (800) 383-2244 X 101 [email protected], Inc. Matt Steele (800) 772-4865 [email protected] Reps Mike Neeley (651) 636-6966 [email protected] Whittemore Co. Kurt Wasieleski (651) 331-8984 [email protected]

W.P. & R.S. Mars Company Bob Mars (952) 884-9388 [email protected]

GAUGINGAbrasive Specialists, Inc. Jaime Olsen (763) 571-4111 [email protected] Olson Sales Co., Inc. Clinton Olson (612) 722-9523 [email protected] Precision Don Martin (651) 484-6544 [email protected] Jamie Durand (763) 784-1704 [email protected] Quality Inc/Advanced Inspection Services LLC Keith Summers (763) 249-8130 [email protected] Engineering, Inc. Brian Pascoe (952) 361-5598 [email protected]. Bryce & Associates, Inc. Terry Bryce (763) 449-9900 [email protected]

HYDRAULIC / PNEUMATICSAir Engineering & Supply, Inc. David Maurer (612) 332-4181 [email protected] Compressors, Inc. Matt McCorkle (855) 523-7373 [email protected] Machine Tool Supply Doug Eliason (763) 571-3550 [email protected] Reps Mike Neeley (651) 636-6966 [email protected]

LUBRICATION EQUIPMENT & SYSTEMSLubrication Technologies, Inc. Luke Bame (651) 636-7990 [email protected]

MACHINE & ELECTRICAL REPAIRAgility Machine Tool, Inc. Brian Holcomb (763) 792-8502 [email protected] Machine Tool Sales, Inc. Craig Conlon (763) 559-1975 [email protected] MORI Ellison Technologies Dale Mortier (763) 545-9699 [email protected]

Morris Midwest Craig Hahne (763) 424-5622 [email protected] Inc Greg Buck (763) 476-8600 [email protected]

MACHINE TOOL SALES CHIP CUTTINGAgility Machine Tool, Inc. Brian Holcomb (763) 792-8502 [email protected] Tech Machinery & Supply Tom Sobetski (612) 423-4663 [email protected] Machine Tool Sales, Inc. Craig Conlon (763) 559-1975 [email protected] Olson Sales Co., Inc. Clinton Olson (612) 722-9523 [email protected] MORI Ellison Technologies Dale Mortier (763) 545-9699 [email protected] Machine Tools Kurt Erickson (515) 733-4361 [email protected] Machine Tool, Inc. Dan Hales (763) 553-1711 [email protected] Online Auctions Dennis Hoff (612) 521-5500 [email protected] Tool Supply Corp. Troy Kerin (651) 452-4400 [email protected] Machine Tool LLC Rolf Biekert (612) 886-3386 [email protected] Machinery USA Craig St. John (651) 289-9700 [email protected] Midwest Craig Hahne (763) 424-5622 [email protected] Machinery Solutions, Inc. Kevin Manion (763) 425-6266 [email protected] Machine Tony Bailey (763) 493-3660 [email protected] Machine Tools, Inc. Theron Horn (763) 494-9825 [email protected] Inc Greg Buck (763) 476-8600 [email protected]

DISTRIBUTOR


DISTRIBUTOR

MACHINE TOOL SALES CHIP CUTTING CONTINUEDStone Machinery, Inc. Tom Drazkowski (651) 778-8887 [email protected]. Bryce & Associates, Inc. Terry Bryce (763) 449-9900 [email protected] Machinery Sales LLC Jack Mendenhall (763) 441-5152 [email protected]

MACHINE TOOL SALES FABRICATIONErickson Machine Tools Kurt Erickson (515) 733-4361 [email protected] Online Auctions Dennis Hoff (612) 521-5500 [email protected] Financial, Inc. Spencer Thomas (952) 224-4300 [email protected] Machine Tool LLC Rolf Biekert (612) 886-3386 [email protected] Machine Tools, Inc. Theron Horn (763) 494-9825 [email protected] Inc Greg Buck (763) 476-8600 [email protected]

MACHINE TOOL SALES (USED)Agility Machine Tool, Inc. Brian Holcomb (763) 792-8502 [email protected] Tech Machinery & Supply Tom Sobetski (612) 423-4663 [email protected] Advanced Machinery Harry Youtsos (952) 944-6060 [email protected] Machine Tool, Inc. Dan Hales (763) 553-1711 [email protected] Online Auctions Dennis Hoff (612) 521-5500 [email protected] Machinery Solutions, Inc. Kevin Manion (763) 425-6266 [email protected] Machine Tony Bailey (763) 493-3660 [email protected]

Orca Machine Tools, Inc. Theron Horn (763) 494-9825 [email protected] Inc Greg Buck (763) 476-8600 [email protected]. Bryce & Associates, Inc. Terry Bryce (763) 449-9900 [email protected]

METAL SERVICE CENTERCastle Metals Dave Brown (763) 784-6866 [email protected] Metals of MN, Inc. Luke Harned (763) 785-2340 [email protected]. Vincent & Associates, Ltd. David Hannah (952) 884-7733 [email protected] Steel Supply Company Brandon Walton (612) 333-6868 [email protected] Steel, Inc. Tom Ehlers (763) 544-7100 [email protected] Metals, Inc. Jason King (651) 545-2877 [email protected]

METROLOGYAlliance Metrology, Inc. Bryn Hartwig (763) 493-0026 [email protected] Machine Tool Sales, Inc. Craig Conlon (763) 559-1975 [email protected] Valley Metrology Julie Moravec (715) 483-5334 [email protected]. B. Testing, Inc. Jeff Boisvert (763) 795-9690 [email protected] Precision Don Martin (651) 484-6544 [email protected] Calibration Inc. Rick Brion (952) 882-1528 [email protected] Jamie Durand (763) 784-1704 [email protected] Quality Inc/Advanced Inspection Services LLC Keith Summers (763) 249-8130 [email protected] Engineering, Inc. Brian Pascoe (952) 361-5598 [email protected]

United Standards Lab, Inc. James Dolezal (612) 823-2616 [email protected]

PACKAGINGBemis Healthcare Packaging, Inc. Leigh Asleson (507) 625-1131 [email protected] Recycling Div. Drew Engleman (651) 488-0474 [email protected], Inc. Christina James (507) 387-2039 [email protected]

PLASTIC SHEET ROD & TUBELion Engineering Plastics, Inc. Scott King (952) 641-6300 [email protected] International Paul Carter (952) 934-2303 [email protected] Punch & Plastic, Co. Inc. Kevin Ryan (952) 933-0993 [email protected]

ROBOTICS / AUTOMATIONAlexandria Technical & Community College Laura Urban, Ph.D. (888) 234-1313 [email protected] Tech Machinery & Supply Tom Sobetski (612) 423-4663 [email protected] Sales & Engineering, Inc. Mark Baillie (952) 546-2960 [email protected] McGowan, Inc. Brian Semroska (320) 252-5292 [email protected] Machine Tool, Inc. Dan Hales (763) 553-1711 [email protected] Machine Tony Bailey (763) 493-3660 [email protected]/mation Mark Felts (651) 605-3300 [email protected] Robotics Scott Nelson (763) 450-4381 [email protected] Inc Greg Buck (763) 476-8600 [email protected], Inc. Matt Steele (800) 772-4865 [email protected]

SAFETY EQUIPMENTAir Engineering & Supply, Inc. David Maurer (612) 332-4181 [email protected] Industrial, St. Cloud Division Ken Voigt (320) 253-1020 [email protected]/mation Mark Felts (651) 605-3300 [email protected] Mark Wernimont (763) 559-2590 [email protected]. & R.S. Mars Company Bob Mars (952) 884-9388 [email protected]

SUPPLY SALESHEXIS Andrew Skoog (612) 804-1143 [email protected] Tool Solutions Brett Wharton (952) 432-2484 [email protected] Tool Supply Corp. Troy Kerin (651) 452-4400 [email protected] Machinery Solutions, Inc. Kevin Manion (763) 425-6266 [email protected] (Scientific Cutting Tools) Todd White (800) 383-2244 X 101 [email protected] Mark Wernimont (763) 559-2590 [email protected]

TOOL REPAIR / SERVICINGErickson Machine Tools Kurt Erickson (515) 733-4361 [email protected] Valley Metrology Julie Moravec (715) 483-5334 [email protected] USA, Inc. Mathieu Tapp (651) 636-8488 [email protected] Electronics Repair & Assembly Tom Korin (612) 889-6435 [email protected] Machine Tool LLC Rolf Biekert (612) 886-3386 [email protected] Machinery USA Craig St. John (651) 289-9700 [email protected]

NTM, Inc. Pat Mullins (763) 780-1420 [email protected] Inc Greg Buck (763) 476-8600 [email protected]

WORKHOLDINGHEXIS Andrew Skoog (612) 804-1143 [email protected] Manufacturing Company Inc. Steve Carlsen (763) 572-1500 [email protected] Solutions of MN Inc. Jim Lemons (651) 294-7790 [email protected] Machine Tool Supply Doug Eliason (763) 571-3550 [email protected] Inc Greg Buck (763) 476-8600 [email protected], Inc. Matt Steele (800) 772-4865 [email protected] Machinery, Inc. Tom Drazkowski (651) 778-8887 [email protected] Whittemore Co. Kurt Wasieleski (651) 331-8984 [email protected]


ACCOUNTINGBallenthin, Funk & Johnson, LLP Josh Funk [email protected] USA, LLP Steve Stoup (952) 854-5700 [email protected] Peter Kronlage & Zoch, P.A. Gary Turnquist, CPA (763) 253-1138 [email protected] Advisors, LLP Melvin Enger (763) 535-8150 [email protected] MHM, LLC Eric Hawkinson (612) 376-1264 [email protected] & B Certified Public Accountants, Consultants & Advisors Clint Seehusen (612) 359-9630 [email protected] Anderson Gary Dosdall (952) 979-3100 [email protected] Anderson Chad Marquardt (952) 303-4099 [email protected] and Company Gloria McDonnell (651) 426-7000 [email protected] Dynamics, Inc. Russ Bengtson (952) 854-1415 [email protected]

BANKING / FINANCINGAlerus Financial Lisa Moncrief (952) 417-3768 [email protected] Bank-Eagan* Wendy Carney (651) 306-1625 [email protected] Roger Hamilton (651) 291-6263 [email protected] State Bank and Trust Marc Flanders (952) 905-5043 [email protected] Bank Matt Heger (763) 422-4520 [email protected] Bank Tim Swanson (651) 289-5000 [email protected] & Monroe, LLC Chad Marquardt (952) 303-4099 [email protected] Real Estate Consultants Kay Harris, CCIM, M.Ed. (952) 915-4444 [email protected]

KLC Financial, Inc. Spencer Thomas (952) 224-4300 [email protected] Hoffman Daly & Lindgren Ltd. Mark Geier (952) 835-3800 [email protected] Bank Karl Neset (952) 230-9820 [email protected] Capital Corporation Bruce Behm (763) 550-9000 [email protected] Paul Port Authority B. Kyle (651) 224-5686 [email protected] Bank Kriss Griebenow (763) 398-3333 [email protected] Bank, National Association Jeffry Wosje (952) 857-4069 [email protected]

CAPITAL EQUIPMENT FINANCINGAlerus Financial Lisa Moncrief (952) 417-3768 [email protected] Roger Hamilton (651) 291-6263 [email protected] State Bank and Trust Marc Flanders (952) 905-5043 [email protected] Financial, Inc. Spencer Thomas (952) 224-4300 [email protected] Bank Karl Neset (952) 230-9820 [email protected]

COMPUTER SOFTWARE & TRAININGa COUPLE of GURUS Keith Schoolcraft (612) 454-4878 [email protected] Metrology, Inc. Bryn Hartwig (763) 493-0026 [email protected] Technical College Nick Graff (763) 576-4700 [email protected] Peter Kronlage & Zoch, P.A. Gary Turnquist, CPA (763) 253-1138 [email protected] Software Corporation Christine Hansen (952) 417-5161 [email protected]

Exact JobBOSS Michael Stadelman (800) 777-4334 [email protected] CAM Solutions, Inc. Richard Lord (763) 560-6567 [email protected] Medics, Inc. Kevin Calgren (612) 315-7100 [email protected] School of Technology/Globe University Lee Petersen (651) 730-5100 [email protected] Engineering, Inc. Brian Pascoe (952) 361-5598 [email protected] - Vero Software Doug Wood (651) 982-0100 [email protected] Community College-Austin Peggy Young (507) 433-0602 [email protected] Dynamics, Inc. Russ Bengtson (952) 854-1415 [email protected] Pam Bednar (651) 228-1772 [email protected]

CONSTRUCTIONConstruction Results Corporation Mark Snyder (763) 559-1100 [email protected]

ECONOMIC DEVELOPMENTAlexandria Technical & Community College Laura Urban, Ph.D. (888) 234-1313 [email protected] Minnesota, Inc. John Connelly (612) 373-2900 john.connelly@ enterpriseminnesota.orgKayHarris Real Estate Consultants Kay Harris, CCIM, M.Ed. (952) 915-4444 [email protected] High Tech Association Andrew Wittenborg (952) 230-4555 [email protected] Community College-Austin Peggy Young (507) 433-0602 [email protected] Paul Port Authority B. Kyle (651) 224-5686 [email protected]

EMPLOYEE BENEFITSCBIZ MHM, LLC Eric Hawkinson (612) 376-1264 [email protected] Group Bob Schmitz (952) 653-1051 [email protected] Hoffman Daly & Lindgren Ltd. Mark Geier (952) 835-3800 [email protected]

ENGINEERING & DESIGN SERVICESAir Engineering & Supply, Inc. David Maurer (612) 332-4181 [email protected] Healthcare Packaging, Inc. Leigh Asleson (507) 625-1131 [email protected] Tom Wolden (763) 560-6015 [email protected] Engineering LLC Don Hickerson (507) 281-0275 [email protected] Tool & Design Co. Julie Ulrich (763) 784-7400 [email protected] Designs LLC Paul Hamre (651) 261-4673 [email protected] Fabrication Services, Inc. Matt Doherty (507) 726-6000 [email protected] Engineering Russell Scheller (507) 625-4011 [email protected] Tool & Engineering, Inc. Tom Murphy (763) 427-6275 [email protected] Die-Casting, Inc. Randy Walters (800) 525-3168 [email protected] Whittemore Co. Kurt Wasieleski (651) 331-8984 [email protected]

INSURANCEChristensen Group Bob Schmitz (952) 653-1051 [email protected] Insurance Jeff Stevenson (507) 455-5200 [email protected]

ISO CERTIFICATION SERVICESEnterprise Minnesota, Inc. John Connelly (612) 373-2900 [email protected] Quality Assurance, USA Terri Sena (978) 635-9256 [email protected]

LEGALDMK Intellectual Property Law PLLC Deirdre Kvale (952) 595-5617 [email protected] & Monroe, LLC Chad Marquardt (952) 303-4099 [email protected] Hoffman Daly & Lindgren Ltd. Mark Geier (952) 835-3800 [email protected] + Vennum LLP Mark Privratsky (612) 371-2461 [email protected]

MERGERS & ACQUISITIONSBDO USA, LLP Steve Stoup (952) 854-5700 [email protected] Peter Kronlage & Zoch, P.A. Gary Turnquist, CPA (763) 253-1138 [email protected] Advisors, LLP Melvin Enger (763) 535-8150 [email protected] MHM, LLC Eric Hawkinson (612) 376-1264 [email protected] & B Certified Public Accountants,Consultants & Advisors Clint Seehusen (612) 359-9630 [email protected] Anderson Gary Dosdall (952) 979-3100 [email protected] Hoffman Daly & Lindgren Ltd. Mark Geier (952) 835-3800 [email protected] Capital Corporation Bruce Behm (763) 550-9000 [email protected]




PROGRAMMINGAnoka Technical College Nick Graff (763) 576-4700 [email protected] High Tech Association Andrew Wittenborg (952) 230-4555 [email protected] Dynamics, Inc. Russ Bengtson (952) 854-1415 [email protected]

R&D TAX CREDIT CONSULTANTSBDO USA, LLP Steve Stoup (952) 854-5700 [email protected] Line Group Scott Schmidt (763) 550-0111 [email protected] Advisors, LLP Melvin Enger (763) 535-8150 [email protected] & B Certified Public Accountants,Consultants & Advisors Clint Seehusen (612) 359-9630 [email protected] Anderson Gary Dosdall (952) 979-3100 [email protected]

Redpath and Company Gloria McDonnell (651) 426-7000 [email protected]

REAL ESTATEAssociated Bank-Eagan* Wendy Carney (651) 306-1625 [email protected] State Bank and Trust Marc Flanders (952) 905-5043 [email protected] Real Estate Consultants Kay Harris, CCIM, M.Ed. (952) 915-4444 [email protected] Hoffman Daly & Lindgren Ltd. Mark Geier (952) 835-3800 [email protected] Paul Port Authority B. Kyle (651) 224-5686 [email protected]

RECYCLINGFluid Management Incorporated Roger Novitzki (612) 378-2580 [email protected] Waste Services, Inc. Mike Antolik (952) 474-2628 [email protected]

Lubrication Technologies, Inc. Luke Bame (651) 636-7990 [email protected] Recycling Div. Drew Engleman (651) 488-0474 [email protected]

RETIREMENT SERVICESChristensen Group Bob Schmitz (952) 653-1051 [email protected]

SHIPPING & DELIVERYOn Time Delivery Service, Inc. Tim Holtan (952) 884-4060 [email protected]

STAFFINGCRTechnical Tom Wolden (763) 560-6015 [email protected] Karla Swanson (612) 876-5868 [email protected] Workforce Solutions Chad Dohlen (651) 633-3889 [email protected]

TECHNICAL COLLEGES / EDUCATIONAlexandria Technical & Community College Laura Urban, Ph.D. (888) 234-1313 [email protected] Technical College Nick Graff (763) 576-4700 [email protected] Community College Jon Olson (763) 433-1201 [email protected] State University Dr. James Bensen (218) 755-2950 [email protected] Lakes College-Staples Christopher Hadfield (218) 894-5172 [email protected] County Technical College Larry Lewis (651) 423-8276 [email protected] College of Technology E. J. Daigle (612) 374-5800 [email protected] Technical College Marguerite Dummer (763) 488-2731 marguerite.dummer@ hennepintech.eduLake Superior College Max Udovich (218) 733-7631 [email protected] Community & Tech. College Kim Munson (612) 659-6093 [email protected] State College, Southeast Technical Roger Holland (507) 453-2700 [email protected] School of Technology/Globe University Lee Petersen (651) 730-5100 [email protected] Technical College Julie Dillenburg (320) 629-5112 [email protected] College Dale Bomstad (320) 234-8568 [email protected] Community College-Austin Peggy Young (507) 433-0602 [email protected] Central College Tom Kammer (507) 389-7336 [email protected]. Cloud Tech & Comm College Bruce Peterson (320) 308-5000 [email protected]

St. Paul College-A Comm. & Tech. College Cheryl Beaumier (651) 846-1600 [email protected] of St Thomas Bob Bach (651) 962-5510 [email protected]º Mfg & Applied Engineering,ATE Regional Ctr of Excellence Karen White (218) 755-2208 [email protected]

WEALTH MANAGEMENTAlerus Financial Lisa Moncrief (952) 417-3768 [email protected] Roger Hamilton (651) 291-6263 [email protected]

Federated Mutual Insurance Company Federated Service Insurance Company* Federated Life Insurance CompanyOwatonna, Minnesota 55060 Phone: 507.455.5200www.federatedinsurance.com

*Not licensed in the states of NH, NJ, and VT.© 2015 Federated Mutual Insurance Company

www.federatedinsurance.com

Call our Association

Partner!

Documents

2016 - c.ymcdn.comc.ymcdn.com/.../resmgr/pdfs/2016/PM_BuyersGuide16.pdf · 2016 BUYER'S GUIDE January ... & BROACHING Accu-Prompt, Inc. Scott Hoffmann ... HONING - LAPPING & FINISHING