1991-2001 HONDA PRELUDE PROJECTOR HEADLIGHTS INSTALLATION INSTRUCTIONS

TOOLS AND SUPPLIES REQUIRED

X" Drive Ratchet

10mm Socket

Phillips Screwdriver

Trim Pad Remover

Product Part Numbers:

LHP-PL97 JM-DP

LHP-PL97-DP

1. (5) 1 Omm bolts location

3. Remove phillips head screw

1997-2001 HONDA PRElUDE PROJECTOR HEADllGHTS INSTALLATION INSTRUCTIONS

2. Remove (5) 10mm bolts

4. (2) plastic clips location

5. Remove (2) plastic clips

7. Remove (2) plastic clips

9. Remove plastic clip located behind grill

6. Plastic clips location

8. Plastic clip locate behind grill

10. Remove the vehicles's front grill

11. (5) plastic clips location 12. Remove (5) plastic clips

14. Unplug the front bumper light

15. Remove the front bumper 16. 1 Omm bolt location

17. Remove 10mm bolt 18. 1 Omm bolt locate

19. Remove 1 Omm bolt

21. Remove 10mm bolt 22. Unplug the headlight harness

23. Unplug the light socket 24. Remove the headlight

26. Plug headlight harness into new headlight

27. Tighten the 10mm bolt locate above the headlight 28. Tighten the 1 Omm bolt

29. Tighten 1 Omm bolt 30. Tighten 1 Omm bolt

32. Replace the (5) plastic clips

33. Replace the front grill 34. Replace the plastic clips

35. Replace the plastic clips

37. Please repeat the ateps in order from 1 to 36 for theopposite side

36. Replace the plastic clip

38. The installation now is complete