of 56 /56
Question Paper Management Accounting I (151) – January 2005 Answer all questions. Marks are indicated against each question. 1. A form of cost not measured by either Financial Accounting System or Management Accounting System is known as (a) Product Cost (b) Period Cost (c) Opportunity Cost (d) Indirect Cost (e) Direct cost. (1 mark) < Answer > 2. Which of the following statements is true? (a) Management accounting is mandatory for business organizations because it should be maintained as per the various legal statutes (b) The application of management accounting cannot be extended beyond the traditional accounting system (c) Management accounting focuses more on a company as a whole and less on the parts or segments of a company (d) Management accounting statements are prepared in accordance with the Generally Accepted Accounting Principles (e) Management accounting refers to the reports prepared to fulfill the needs of the management. (1 mark) < Answer > 3. Which of the following is least likely to be an objective of a cost accounting system? (a) Product pricing (b) Product mix determination (c) Department efficiency (d) Inventory valuation (e) Sales commission determination. (1 mark) < Answer > 4. The costs having clear relationship to output are known as (a) Opportunity costs (b) Engineered costs (c) Manufacturing costs (d) Overhead costs (e) Budgeted costs. (1 mark) < Answer >

151-0105

Embed Size (px)

Text of 151-0105

Question Paper Management Accounting I (151) January 2005 Answer all questions. Marks are indicated against each question. 1. A form of cost not measured by either Financial Accounting System or Management Accounting System is known as (a) Product Cost (d) Indirect Cost 2. Which of the following statements is true? (a) Management accounting is mandatory for business organizations because it should be maintained as per the various legal statutes (b) The application of management accounting cannot be extended beyond the traditional accounting system (c) Management accounting focuses more on a company as a whole and less on the parts or segments of a company (d) Management accounting statements are prepared in accordance with the Generally Accepted Accounting Principles (e) Management accounting refers to the reports prepared to fulfill the needs of the management. (1 mark) 3. Which of the following is least likely to be an objective of a cost accounting system? (a) Product pricing (c) Department efficiency (e) Sales commission determination. 4. (b) Product mix determination (d) Inventory valuation (1 mark) The costs having clear relationship to output are known as (a) Opportunity costs (c) Manufacturing costs 5. (b) Engineered costs (d) Overhead costs (e) Budgeted costs. (1 mark) The cost of goods manufactured, under a periodic cost accumulation system, is equal to the (a) (b) (c) (d) (e) 6. Cost of goods sold less beginning work-in-process Cost of goods put into production plus beginning work-in-process less ending work-in-process Cost of goods put into production plus ending work-in-process less beginning work-in-process Cost of goods available for sale plus beginning finished goods less ending finished goods Cost of goods available for sale plus ending finished goods less beginning finished goods. (1 mark) Which of the following is true? (a) (b) (c) (d) (e) Decremental cost means the cost of an additional unit Standard cost tells us what the actual cost is for the product Period costs are not assigned to products Cost center and cost unit are the same Cost of production is equal to prime cost plus works cost. (1 mark)< Answer > < Answer > < Answer > < Answer >

(b) Period Cost (e) Direct cost.

(c) Opportunity Cost (1 mark)< Answer >

< Answer >

7.

Which of the following items is not considered in cost accounting? (a) Direct materials (d) Hire of cranes on job (b) Holiday with pay (e) Income tax. (c) Royalty (1 mark)

< Answer >

8.

A manager of a company wants to control and reduce, if possible, the company's production costs. He must determine how the production costs are related to and affected by the various business activities. The manager needs to understand the (a) Cost behaviors (d) Variable costs (b) Relevant ranges (c) Fixed costs (e) Total costs. (1 mark)

< Answer >

9.

The average method of valuation of inventory in process costing is suitable, if (a) (b) (c) (d) (e) Prices are increasing Prices of inventory fluctuate from period to period Abnormal loss is incurred at the beginning of the process Material is continually introduced Material is introduced at the beginning of the process. (1 mark)

< Answer >

10. The following statements are true except (a) (b) (c) (d) (e) Managers of all companies analyze costs to control material, labor and overhead Managers of all companies analyze cost to properly value inventory Managers of all companies need to improve quality Managers of all companies need to improve productivity Managers of all companies need to improve efficiency. (1 mark) 11. ABC Companys budgeted overhead amounts to Rs.3,00,000 based on an output of 200 units of A, 300 units of B, and 500 units of C. Direct labor costs of A, B, and C per unit amount to Rs.75, Rs.50, and Rs.40 respectively. Overhead is applied based on budgeted overhead rates using labor cost as cost driver. If actual overhead amounts to Rs.3,19,000 for the production of 300, 350, and 400 units of A, B and C respectively, the under or over applied overhead amounts to (a) Rs.19,000 underapplied (d) Rs.17,000 overapplied (b) Rs.19,000 overapplied (c) Rs.17,000 underapplied (e) Rs.14,000 under applied. (1 mark) 12. Which of the following is an indirect labor? (a) (b) (c) (d) (e) A stores assistant in a factory store An audit clerk in a firm of auditors An assembly worker in a company manufacturing televisions A mason of a construction company A technician of a machine tool shop. (1 mark)

< Answer >

< Answer >

< Answer >

13. Which of the following is/are true? I. II. A cost unit is a unit of output in the production of which costs are incurred A cost center is the smallest segment of activity or area of responsibility for which costs are accumulated III. Typically departments are cost centers and there may be many departments in a cost center. (a) Only (I) above (c) Only (III) above (e) Both (II) and (III) above. (b) Only (II) above (d) Both (I) and (II) above (1 mark) 14. The classification of cost as either direct or indirect depends upon (a) (b) (c) (d) (e) The cost object to which the cost is being related The timing of the cash outlay for the cost The behavior of the cost in response to volume changes The controllability of costs The avoidability of costs. (1 mark) 15. Costs are allocated to cost objects in many ways and for many reasons. Which of the following is a purpose of cost allocation? (a) (b) (c) (d) (e) Implementing activity-based costing Evaluating revenue center performance Budgeting cash and controlling expenditures Aiding in variable costing for internal reporting Measuring income and assets for external reporting. (1 mark) 16. In allocating factory service department costs to production departments, which of the following items would most likely be used as an activity base? (a) (b) (c) (d) (e) Salary of service department employees Units of electric power consumed Direct materials usage Units of finished goods shipped to customers Units of product sold. (1 mark) 17. At 60% capacity utilization, the overhead recovery rate is Rs.17.50 per unit. At 70% capacity level, the rate gets reduced to Rs.16 per unit. If the production attains 88% of the capacity utilization, the recovery rate would be (a) Rs.12.60 (b) Rs.12.46 (c) Rs.14.16 (d) Rs.12.24 (e) Rs.14.00. (1 mark)

< Answer >

< Answer >

< Answer >

< Answer >

< Answer >

18. Ajex Ltd. had the following inventories at the beginning and end of the month of December 2004: Particulars Finished goods Work-in-process Direct materials December 1, 2004 (Rs.) 1,25,000 2,35,000 1,34,000 December 31, 2004 (Rs.) 1,17,000 2,51,000 1,24,000

< Answer >

The

following

additional manufacturing data were available for the month of December 2004: (Rs.) 1,89,000 1,000 3,000 3,00,000 1,75,000 The company applies factory overhead at a rate of 60% of direct labor cost, and any overapplied or underapplied factory overhead is deferred until the end of the year 2004-05. The manufacturing cost of the company for the month of December 2004 was (a) Rs.6,81,000 (b) Rs.6,65,000 (c) Rs.4,89,000 (d) Rs.2,01,000 (e) Rs.6,73,000. (2 marks) 19. For a department, the standard overhead rate is Rs.2.50 per hour and overhead allowances are as follows: Activity level (hours) 3,000 7,000 11,000 (a) 4,000 hours Budgeted overhead allowance (Rs.) 10,000 18,000 26,000 (c) 5,500 hours< Answer >

Particulars Direct materials purchased Purchase returns and allowances Transportation Direct labor Actual factory overhead

The normal capacity level, on (e) 6,500 hours. (2 marks)< Answer >

the basis of which the standard overhead rate has been worked out, is (b) 5,000 hours (d) 8,000 hours

20. Nivedita Ltd. has furnished the following information pertaining to its machine: i. ii. iii. iv. Total cost of machine to be depreciated Rs.3,00,000 Life of machine 10 years Depreciation on straight line Departmental overheads (annual) Rent Rs.40,000; Heat and light Rs.30,000; Supervision Rs.1,50,000 v. Departmental area 70,000 square metres; Machine area 2,500 square metres vi. Number of machines 25 vii. Annual cost of reserve equipment for machines Rs.2,000 viii. Hours run on production 2,000 ix. Hours for setting and adjusting 150 x. Power cost Re.0.50 per hour of running time xi. Labor : * When setting and adjusting full time attention * When machine is producing one worker can look after 2 machines xii. Labor rate is Rs.8 per hour. The comprehensive machine hour rate of the company is (a) Rs.25.25 (b) Rs.22.25 (c) Rs.20.80 (d) Rs.22.00 (e) Rs.24.39. (2 marks)

21. The allocation of costs to a particular cost object allows a firm to analyze all of the following except (a) (b) (c) (d) (e) Whether a production manager earns a bonus Whether a particular department should be expanded Whether a product line should be discontinued The causes of increase in the sales of a particular product The decision with regard to a particular product, which should be purchased or manufactured in-house. (1 mark)

< Answer >

22. If predetermined overhead rate is not employed and the volume of production is increased over the level planned, the cost per unit would be expected to (a) (b) (c) (d) (e) Decrease for fixed costs and remain unchanged for variable costs Remain unchanged for fixed costs and increase for variable costs Decrease for fixed costs and increase for variable costs Increase for fixed costs and increase for variable costs Increase for fixed costs and remain unchanged for variable costs. (1 mark) 23. Priya Ltd. produces products P and Q. The direct cost of P is Rs.300 per unit (Rs.200 materials and Rs.100 labor) and Q is Rs.400 per unit (Rs.300 material and Rs.100 labor). 80 units of P and 150 units of Q were produced. Overhead amounts to Rs.1,68,000 and is composed of material handling Rs.18,000, labor support Rs.80,000, machine operation Rs.60,000 and general administration Rs.10,000. Material handling cost driver is material cost, labor support cost driver is labor cost. Machine operation cost resulted from running the machines for a total of 600 hours (3/4th of which was for product P). General administration effort related equally to product P and Q. Machine operation cost chargeable per unit of Q amounts to (a) Rs. 100 (b) Rs.250 (c) Rs.600 (d) Rs.680 (e) Rs.340. (1 mark)

< Answer >

< Answer >

24. Raja Ltd. has furnished the following data pertaining to products: Department A B C D * Number of Employees* 10 (10) 14 (8) 20 (6) 30 (4) Number of Hours 20,000 18,000 22,000 15,000 Square feet 20,000 4,000 6,000 10,000 Number of Units sold 200 400 1,000 3,000 Sales (Rs.) 13,50,000 9,50,000 7,50,000 3,75,000

< Answer >

Total 74 75,000 40,000 4,600 34,25,000 The number of full time employees is listed in the parenthesis. Full time employees work on an average for 4 years with the company, part-time employees work on an average for 5 months with the company.

The Personnel Department costs amount to Rs.81,400. The personnel department is responsible for recruiting, hiring and managing the benefits. What would be the amount of Personnel Department cost allocated to Department C assuming that the allocation is based on the number of employees? (a) Rs.4,400 (b) Rs.13,200 (c) Rs. 44,000 (d) Rs.1,62,800 (e) Rs.22,000. (1 mark)

25. Replacement cost is the (a) (b) (c) (d) (e) Written-down value of the abondoned asset less its scrap value Cost which is not essential for the decision(s) under consideration Cost at which there could be purchase of an asset identical to that which is being replaced or revalued Maximum possible alternative earning that might have been earned if the productive capacity or services had been put to some alternative use Change in cost due to the change in the level of activity. (1 mark) Cost of goods sold Work-in-process and cost of goods sold Work-in-process, finished goods and cost of goods sold Work-in-process and finished goods Cost of goods sold and finished goods. (1 mark) 27. The upper limit of a companys productive output capacity given its existing resources is called (a) Theoritical capacity (d) Excess capacity (b) Practical capacity (e) Cycle-time capacity. (c) Normal capacity (1 mark) 28. Consider the following information of a company for a period: i) ii) iii) iv) v) vi) vii) Acquired Rs.50,000 of capital from owners Paid Rs.10,000 for all materials used in starting and completing 50 units of product A Paid Rs.5,000 for administrative salaries Paid Rs.8,000 for wages of production workers Depreciation of office furniture Rs.3,000 Depreciation of manufacturing equipment Rs.3,500 Collected Rs.25,000 in cash for all sales made during the period. (b) Rs. 5,650 (c) Rs.28,000 (d) Rs.30,000 (e) Rs. 3,000. (1 mark)

< Answer >

26. If under or over applied overhead is considered to be relevant, which accounts should it be allocated to? (a) (b) (c) (d) (e)

< Answer >

< Answer >

< Answer >

If 50 units were completed and 5 units were in ending inventory, the gross margin for the period is (a) Rs. 2,150

29. Shiva Ltd. had 8,000 units of work-in-procress inventory in department A on December 1, 2004. These units were 60% complete as to conversion costs. Direct materials are added at the beginning of the process. During the month of December 2004, 34,000 units were started and 36,000 units were completed. The company had 6,000 units of work-in-process inventory on December 31, 2004. These units were 80% complete as to conversion costs. The equivalent production units of conversion (under average method) exceeds the equivalent production of conversion (under FIFO method) by (a) 8,000 units (b) 6,000 units (c) 3,200 units (d) 4,800 units (e) 5,000 units.. (2 marks)

< Answer >

30. A factory has three production departments P1, P2 and P3 and 2 service departments S1 and S2. Budgeted overheads for the next year have been allocated or apportioned by the cost department among the 5 departments. The secondary distribution of service department overheads is pending and the following details are given: Department P1 P2 P3 Department Overheads apportioned/allocated (Rs.) 48,000 1,12,000 52,000 Estimated level of activity 5,000 labor hours 12,000 machine hours 6,000 labor hours

< Answer >

Overheads apportioned / Apportionment of service allocated (Rs.) department costs S1 16,000 P1(20%),P2(40%), P3(20%) & S2(20%) S2 24,000 P1(10%), P2(60%), P3(20%) & S1(10%) The overhead rates of P1 and P3 departments after completing the distribution of service department costs are (a) Rs.10.91 and Rs.10.22 respectively (b) Rs.10.91 and Rs.11.35 respectively (c) Rs.11.35 and Rs.10.22 respectively (d) Rs.10.91 and Rs.11.00 respectively (e) Rs.11.00 and Rs.11.35 respectively. (2 marks) 31. The rate which is used to carry out adjustment for the difference between overheads absorbed and overheads incurred is known as (a) Blanket rate (d) Supplementary rate (b) Plant wide rate (e) Moving average rate. (c) Single rate (1 mark) 32. Consider the following data pertaining to inventories of Calex Ltd. for the month of December 2004: Particulars Raw materials Work-in-process Finished goods i. ii. iii. iv. Opening inventory (Rs.) 7,120 8,000 9,000 Closing inventory (Rs.) 8,635 3,000 11,000 Rs. 32,665< Answer > < Answer >

Other information:

The materials purchased and the amount of factory overhead applied are (a) Rs.31,270 and Rs.49,936 respectively (b) Rs.31,150 and Rs.31,210 respectively (c) Rs.34,180 and Rs.31,210 respectively (d) Rs.34,180 and Rs.18,726 respectively (e) Rs.34,180 and Rs.12,484 respectively.

Raw materials used Total manufacturing costs charged to product (it includes raw materials, direct labor and factory overheads applied @ 60% of direct labor cost) Cost of goods available for sale Selling and general expenses

Rs. 82,601 Rs. 1,02,600 Rs. 2,500

costs

of

raw

(1 mark)

33. An Operation Costing System is (a) Identical to a process costing system except that actual cost is used for manufacturing overhead (b) The same as a job-order costing system except that no overhead allocations are made since actual costs are used throughout (c) The same as a job-order costing system except that materials are accounted for in the same way as they are in a process costing system (d) The same as a process costing system except that materials are allocated on the basis of batches of production (e) Identical to direct costing system except that no overhead allocations are made since actual costs are used throughout. (1 mark) 34. Sun Flower Ltd. has furnished the following data of its process account for the month of December 2004: Particulars Materials introduced Opening WIP Closing WIP (a) 20,000 units Completion of materials 60% 50% (b) 16,000 units (c) 14,000 units Units 13,000 3,000 4,000

< Answer >

< Answer >

The equivalent completed units

of material in the process, under average method, is (d) 12,200 units (e) 10,000 units. (1 mark)< Answer >

35. Air Purifier Ltd. uses process cost system to manufacture Dust Density Sensors for the mining industry. The following pertains to operations for the month of December 2004: Particulars Units Opening work-in-process (December 01, 2004) 450 Introduced in production during December 2004 4,100 Closing work-in-process (December 31, 2004) 520 There is no loss in the manufacturing process. The opening inventory was 80% complete for materials and 60% complete for conversion costs. The closing inventory was 75% complete for material and 65% complete for conversion costs. Costs pertaining to the month of December 2004 are as follows: Opening work in process: Materials Conversion During the month: Materials Conversion on December 31, 2004, using FIFO method, is (a) Rs.10,708.62 (b) Rs.11,649.63 Rs. 6,850 Rs. 4,350 Rs.71,050 Rs.57,372 The total cost of closing work-in-process (d) Rs.11,557.00 (e) Rs.12,443.00. (2 marks)

(c) Rs.12,573.78

36. The yield of a certain process is 80%, the by-product is 16% and normal loss is 4% of its main product. 5,000 units of materials are put in process and its cost is Rs.24.80 per unit and other expenses amounted to Rs.15,150, 40% of which was accounted for by power cost. It is the practice of the company that the power cost is chargeable to the main-product and the by-product in the ratio of 3:2. The cost of the by-product is (a) Rs.24,606 (b) Rs.55,660 (c) Rs.26,727 (d) Rs.22,264 (e) Rs.23,718. (2 marks)

< Answer >

37. Six Chemicals Ltd. produces high-quality plastic sheets in a continuous manufacturing operation. All materials are introduced at the beginning of the process. Conversion costs are incurred evenly throughout the process. A quality control inspection occurs when units are 75% through the manufacturing process, when some units are separated out as inferior quality. The following data are available for the month of December 2004: Material costs Conversion costs Units introduced Units completed Rs.90,000 Rs.70,200 40,000 36,000

< Answer >

There is no opening or closing work-in-progress. Past experience indicates that approximately 7.5% of the units introduced are found to be defective on inspection by quality control. The cost of abnormal loss for the month of December 2004 is (a) Rs.3,865 (b) Rs.3,725 (c) Rs.3,600 (d) Rs.3,575 (e) Rs.3,425. (2 marks)< Answer >

38. Brand Manufacturing Company makes one model of a product known as Brand B. The company has provided the following balances as on April 01, 2004: Finished goods 500 units Work-in-process Rs. 5,740 Raw materials Rs. 11,620 The following data are available as on September 30, 2004 Indirect labor Rs. 12,160 Freight in Rs. 5,570 Direct labor Rs. 32,640 Raw material Rs. 9,640 Factory overhead expenses Rs. 31,730 Work-in-process Rs. 7,820 Sales (15,000 units) Rs.3,60,000 Indirect material Rs. 21,390 Total manufacturing costs incurred Rs.1,94,080 There were 1,500 units of finished goods of Brand B as on September 30, 2004. The amount of raw materials purchased during the half-year ended September 30, 2004 is (a) Rs. 92,570 (b) Rs. 88,610 (c) Rs. 94,180 (d) Rs. 86,530 (e) Rs.1,21,250. (2 marks)

39. Mr. Subramaniyam owns a fleet of taxis and the following information is available from the records maintained by him: Number of taxis Cost of each taxi Salary of manager Salary of accountant Salary of cleaner Salary of mechanic Garage rent Insurance premium Annual tax Salary of driver Annual repairs Oil and other sundries 5 Rs.2,70,000 Rs.6,500 per month Rs.5,000 per month Rs.800 per month Rs.2,200 per month Rs.2,000 per month 5% per annum Rs.4,200 per taxi Rs.5,000 per month per taxi Rs.2,000 per taxi Rs.10 per 100 kms

< Answer >

The total life of a taxi is about 3,00,000 km. A taxi runs in all 4,500 km in a month of which 20% it runs empty. Petrol consumption is 5.62 km per litre. The cost of petrol is Rs.36 per litre. The cost of running a taxi per km. is (a) Rs.15.00 (b) Rs.14.30 (c) Rs.12.80 (d) Rs.12.03 (e) Rs.10.80. (2 marks)< Answer >

40. PH Ltd. operates several production processes involving the mixing of ingredients to produce bulk animal feedstuffs. One such product is mixed in two separate process operations. The company has furnished the following information pertaining to process 2 for the quarter ending December 31, 2004: Cost incurred: Transferred from process 1 Raw materials Conversion costs Opening work-in-process Production: Opening work-in-process (Material 100% complete apart from process Conversion cost 50% complete) Transferred from process 1 Completed output Closing work-in-process (Material 100% complete apart from process 2 Conversion 75% complete) Rs. 1,87,704 47,972 63,176 3,009 Units 1,200

1,12,000 1,05,400 1,600

Normal wastage of materials (including product transferred from process 1), which occurs in the early stage of process 2 (after all materials have been added), is expected to be 5% of input, process 2 conversion costs are all apportioned to units of good output. Wastage materials have no saleable value. The values of finished goods and closing WIP (using FIFO method) are (a) Rs.2,96,237 and Rs.4,259 respectively (b) Rs.2,96,021 and Rs.4,212 respectively (c) Rs.2,96,273 and Rs.4,295 respectively (d) Rs.2,96,021 and Rs.4,259 respectively (e) Rs.2,96,273 and Rs.4,259 respectively. (2 marks)

< 41. Sitpax Ltd. purchases raw materials worth Rs.16.56 lakhs and processes them into 4 products A, B, C and D. The sale value per unit of products A, B, C and D is Rs.4.50, Rs.13.50, Rs.24 and Rs.90 respectively at Answer > split-off point, as these could be sold as such to other processors. However, during a year, the company decided to further process and sell products A, B and D while C was not to be processed further but sold at split-off point to other processors. The processing of raw materials into 4 products cost Rs.42 lakhs to the company. The company has furnished the following information pertaining to the 4 products:

Product

Output (units)

Sales after further processing (Rs. in lakhs)

A 10,00,000 69.00 B 20,000 6.00 C 10,000 2.40 D 18,000 18.00 maximum profit of the company after adopting best sales strategy is (a) Rs.16.24 lakhs (b) Rs.15.86 lakhs (c) Rs.14.64 lakhs (d) Rs.14.94 lakhs (e) Rs. 7.74 lakhs. 42. If the size of a batch increases (a) Setting-up cost per unit decreases (c) Setting-up cost per unit remains the same (e) Total profit of the batch decreases. 43. Consider the following data of a company: Material Purchased - Rs.170,000. There was no beginning inventory Direct labor incurred - 400 hours at the rate of Rs.10 per hour Budgeted overheads - 430 hours Budgeted overhead cost - Rs.6,450 Units started - 20,000 units Units completed - 15,000 units Actual overheads - Rs.6,200 Ending Inventory - 60% complete. The value of ending inventory is (a) Rs.50,000 (b) Rs.30,000 (c) Rs.20,000 (d) Rs. 5,000 44. Bhuban Ltd. has furnished the following cost structure of product M: Direct material Direct labor Overhead costs 50% 20% 30%

Additional processing cost after split off (all variable cost) (Rs. in lakhs) 18.00 3.60 0.60

The

(3 marks) (b) Setting-up cost per unit increases (d) Total cost of the batch decreases (1 mark)< Answer > < Answer >

(e) Rs.25,000. (2 marks)< Answer >

The sale price of the product is Rs.45,000. The company has estimated an increase of 15% in the cost of matertials and an increase of 25% in the cost of the labor. These increased costs in relation to the present selling price would cause a 25% decrease in the amount of present profit per unit. The revised selling price to produce the same percentage of profit to sales as before, is (a) Rs.60,000 (b) Rs.45,000 (c) Rs.50,500 (d) Rs.50,050 (e) Rs.50,625. (2 marks)

45. The total production cost for making 20,000 units was Rs.21,000 and the total production cost for making 50,000 units was Rs.34,000. Once production exceeds 25,000 units, additional fixed costs of Rs.4,000 are incurred. The cost per unit for making 30,000 units is (a) 80 paise (b) 50 paise (c) 68 paise (d) 84 paise (e) 93 paise. (2 marks)

< Answer >

< 46. Ray Ltd. manufactures product R in a two-stage production cycle in departments A and B. Direct materials Answer are added at the beginning of the process in department B. The company uses the weighted average method. > Conversion costs for department B were 50% complete as to the 6,000 units in the beginning work-inprocess inventory and 75% complete as to the 8,000 units in the ending work-in-process inventory. 12,000 units were completed and transferred out of department B during the month of December 2004. An analysis of the costs relating to work-in-process inventory and production activity in department B for the month of December 2004 is as follows:

Transferred in Materials costs Conversion costs (Rs.) (Rs.) (Rs.) Opening WIP,cost attached 12,000 2,500 1,000 December activity, cost added 29,000 5,500 5,000 The total cost per equivalent unit transferred out for the month of December 2004, of product R, was (a) Rs.2.75 (b) Rs.2.78 (c) Rs.2.82 (d) Rs.2.85 (e) Rs.2.90. (2 marks) Particulars 47. The following data are available pertaining to a product after passing through 2 processes-A & B: Output transferred from process B to process C - 9,120 units for Rs.49,263 Expenses incurred in process C: Materials Rs.1,480; Labor cost Rs.6,500; Direct expenses Rs.1,605. The wastage of process C is sold at Re.1 per unit.The overheads were 168% of direct labor. The final product was sold at Rs.10 per unit after charging a profit of 20% on sales. There is no closing stock.The percentage of wastage in process C is (a) 10% (b) 5% (c) 15% (d) 8% (e) 12%. (2 marks)< Answer >

< 48. A certain chemical process yields 75% of material introduced as main product, 20% as by-product and 5% being lost. In the process one unit of main product requires double the material required for one unit of by- Answer > product. Further one unit of main product needs 1.5 times the time needed for one unit of by-product. Overheads are absorbed in the ratio of 3:1.

During a week, 1,000 units of raw material at a cost of Rs.17,000 were introduced. Total labor cost was Rs.5,300. Total Overheads came to Rs.2,700. Wastages realised Rs.300. The cost of by-product per unit is (a) Rs.35.50 (b) Rs.28.40 (c) Rs.25.50 (d) Rs.17.00 (e) Rs.41.94. (2 marks)< Answer >

49. Which of the following activities uses process costing? (a) Foundry (c) Road building (b) Automobile repair (d) Electrical contracting (e) Newspaper publishing. (1 mark)

50. Jyothi Constructions undertook a contract for construction of a large complex. The construction work commenced on April 01, 2003 and the following data are available for the year ended March 31, 2004: Particulars Rs. Total contract price 80,00,000 Work certified 60,60,000 Progress payment received 50,00,000 Material issued to site 30,80,000 Planning and estimating costs 4,80,000 Direct wages paid 12,30,000 Materials returned from site 42,500 Site office cost 26,400 Plant hire charges 1,82,000 Wage related costs 92,600 Head office expenses apportioned 80,500 Direct expenses incurred 85,300 Work not certified 4,25,000 Materials at site 60,000 Accrued wages 55,500 The contractors own a plant which originally cost Rs.18,00,000 and has been continuously in use in this contract throughout the year. The salvage value of the plant after 10 years is expected to be Rs.50,000. The company uses the straight-line method of depreciation. The total of work-in-process and plant at site to be shown in the balance sheet as on March 31, 2004 is (a) Rs.26,14,970 (b) Rs.27,89,970 (c) Rs.31,10,000 (d) Rs.32,85,000 (e) Rs.27,96,970. (2 marks)

< Answer >

< 51. A, B and C are the main products and M is the by-product of a company, where A is a liquid and B is a gas and C is a solid. If product A and product B are further processed before being in a saleable state and product Answer > C is sold without further processing, then which of the following is the most appropriate basis for apportionment of costs of M to joint products A, B and C?

(a) Physical units (b) Sales value at separation point (c) Notional sales value at separation point (d) Standard sales value at separation point (e) Sales value after further processing cost. (1 mark) 52. Which of the following statements is true? (a) (b) (c) (d) (e) Job costing can be more suitably used in concerns producing uniform products on repetitive basis Job costing is applied only in small concerns Escalation clause in a contract provides that the contract price is fixed Final contract price to be paid is certain in cost plus contracts In contract costing credit is taken only for a part of the profit on incomplete contracts. (1 mark) (b) Period cost (e) Discretionary cost. (c) Product cost (1 mark)< Answer >

53. If the amount of wastage in a manufacturing process is abnormal, it should be classified as (a) Deferred charge (d) Joint cost

< Answer >

54. Overhead rate per unit of production is an appropriate overhead allocation base when (a) (b) (c) (d) (e) Several well differentiated products are manufactured Direct labor costs are low Direct material costs are large relative to direct labor costs Only one product is manufactured The manufacturing process is complex. (1 mark) 55. Tifco Ltd. has furnished the following information pertaining to a new product: i. ii. iii. The fixed costs will be Rs.80,000 for production of 7,500 units or less. If the production is more than 7,500 units, the fixed costs will be Rs.1,20,000. The variable cost ratio is 60% of the sales for the first 7,500 units and it will be reduced to 50% of sales for units in excess of 7,500 units. The sale price of the product per unit is Rs.25. (b) 11,100 (c) 12,500 (d) 9,600 (e) 8,500. (2 marks)

< Answer >

< Answer >

If the company manufactures more than 7,500 units, the break-even units of the new product is (a) 12,000

56. X, Y and Z are three similar plants under the same management of AB Ltd. The details are as follows: Plant X Capacity operated 90% Particulars (Rs.in lakhs) Turnover 270 Variable cost 180 Fixed cost 70 percentage of the merged plant is (a) 50% (b) 52% Y 60% (Rs.in lakhs) 240 180 50 (c) 35% Z 50% (Rs.in lakhs) 150 75 62 (d) 55%

< Answer >

The

Break-even (e) 49%. (2 marks)< Answer >

57. Consider the following data of a company: Direct material Direct labor Variable overhead Fixed overhead Budgeted production Actual production Sales Sale price (a) (b) (c) (d) (e) Rs.10 per unit Rs. 6 per unit Rs. 3 per unit Rs. 4 per unit 12,000 units 10,000 units 9,000 units Rs.28 per unit

There is no overhead spending variance

If absorption costing is used, the net income will be Rs.4,800 more than the income under variable costing Rs.4,800 less than the income under variable costing Rs.5,000 more than the income under variable costing Rs.5,000 less than the income under variable costing Same as the net income under variable costing. (2 marks)

58. Cost-volume-profit analysis is most important for the determination of (a) (b) (c) (d) (e) Volume of operations necessary to break-even Margin of safety necessary to equal fixed costs Sales revenue necessary to equal fixed costs Relationship between revenues and costs at various level of operations Sales revenue necessary to equal total costs. (1 mark) 59. Which of the following statements is false with respect to absorption of factory overheads? (a) (b) (c) (d) (e) Machine hour rate is suitable where the machine is the major factor in production Labor hour rate should not be used where machines are used extensively for production Labor hour rate is very useful where labor is the main factor in production Prime cost percentage method considers both materials and labor in charging overhead to each job or product Prime cost percentage method is suitable in capital intensive organisation. (1 mark) Product costs include variable selling costs An idle facility variation is calculated The cost of a unit of product changes because of changes in number of units manufactured Profits fluctuate with sales Product costs include variable administrative costs. (1 mark) 61. The contribution to sales ratio depends upon (a) Fixed cost per unit (c) Sales volume (b) Total fixed cost (d) Production volume (e) Direct expenses. (1 mark) 62. Which of the following can be said about job-order system, process costing system and hybrid system? (a) (b) (c) (d) (e) The type of product manufactured by a company does not influence the type of accounting system used The manufacturing process does not influence the type of accounting system used by a company That cost systems require the use of some form of cost averaging That managers rely upon the cost system to provide information based only upon actual costs That managers rely upon the cost system to provide information based only upon standard costs. (1 mark)

< Answer >

< Answer >

60. Which of the following statements is true for a firm that uses variable costing? (a) (b) (c) (d) (e)

< Answer >

< Answer >

< Answer >

< 63. ABC Company sells three products A, B and C with the price of Rs.20 per unit. However, As variable cost Answer is at 40%, Bs at 50% and Cs at 60%. Fixed costs amount to Rs.18,000. An additional Rs.9,000 need to be > spent on advertising to boost sales. Sales mix is 500, 1,500 and 3,000 units for A, B, and C respectively. Sales in rupees for B at break-even amounts to

(a) Rs.18,000

(b) Rs.27,000

(c) Rs.24,000

(d) Rs.12,000

(e) Rs.22,500. (1 mark)

64. Consider the following data pertaining to a manufacturing company: Present Forecast (2004-05) (2005-06) Sales (units) 10,000 15,000 Loss (Rs.) 5,000 Fixed cost (Rs.) 25,000 25,000 Profit (Rs.) 5,000 The variable cost of sales has been taken at Rs.7 per unit up to 15,000 units and it shall be Rs.8 per unit beyond 15,000 units. Particulars What percentage of increase in sales is required to cover additional 50 paisa per unit towards extra packaging cost in the year 2005-06 for achieving the forecasted contribution level? (a) 100% (b) 150% (c) 200% (d) 75% (e) 50%. (2 marks)

< Answer >

65. Xenil Ltd. has furnished the following cost per unit to manufacture and market XL product: i. Manufacturing costs: Direct materials Direct labor Variable overheads Fixed overheads Marketing costs: Variable Fixed Rs.4.00 Rs.4.80 Rs.3.20 Rs.2.00 Rs.1.25 Rs.1.00

< Answer >

ii.

The company is planning whether to make the product or buy it from an outside supplier. If the company buys it from the market, fixed marketing costs would be unaffected but variable marketing costs would be reduced by 40%. The maximum amount per unit of the product that the company can pay to the supplier without decreasing the operating income, is (a) Rs.14.50 (b) Rs.16.25 (c) Rs.13.25 (d) Rs.12.50 (e) Rs.14.00. (1 mark)>

< 66. Costs which can be reduced or removed from the company's cost structure without affecting product or Answer service quality for the customer are referred to as

(a) Value-added costs (d) Non-value-added costs

(b) Indirect costs (e) Fixed costs.

(c) Variable costs (1 mark)

67. Praful Ltd. has furnished the following information pertaining to product Z: Particulars Rs. per unit Selling price 100 Direct material 60 Direct labour 10 Variable overheads 10 The company has sold 5,035 units during the year. The wages cost would be increased by 10%.The percentage of selling price to be raised to maintain the same P/V ratio is (a) 1.50 % (b) 1.35% (c) 1.25% (d) 1.20 % (e) 1.40 %. (1 mark)

< Answer >

68. AB Ltd. produces and sells two products A and B for Rs.29 and Rs.19 a unit respectively. Variable costs amount to Rs.14 for A and Rs.12 for B per unit. It takes 1 hours to make one unit of A and hour to make one unit of B. Total manpower available is 1,300 hours and maximum demand is 1,800 units of A and 1,700 units of B. The optimum production units of A to maximize profit should be (a) 300 (b) 450 (c) 600 (d) 900 (e) 750. (2 marks) 69. The operating results of M/S. Krupa Ltd for the year 2003-04 were as under: Product A B C D Sales Mix (%) 40 10 30 20 PV Ratio 20 6 12 10

< Answer >

< Answer >

Total of sales value of all the products was Rs.80 lakhs and fixed costs amount to Rs.10 lakhs. The composite P/V ratio is (a) 15.2% (b) 14.2% (c) 12.0% (d) 15.0% (e) 16.0% (2 marks)< 70. ACD Ltd. has been approached by a foreign customer who wants to place an order for 1,500 units of Product C at Rs.22.50 a unit although the company currently sells this item for Rs.39 a unit, and the item has a cost Answer > of Rs.29 a unit. Further analysis reveals that the company will not pay sales commission of Rs.2.50 a unit on these sales and its packaging requirement will save an additional amount of Rs.1.50 per unit. However, the additional graphics required on this job will cost Rs.3,000. The fixed costs amounting to Rs.4,00,000 for the production of 50,000 units of such products by the company will not change. Accepting this job by the company will

(a) (c) (e)

Increase profit by Rs.1,950 Increase profit by Rs.5,250 Decrease profit by Rs.1,950.

(b) (d)

Increase profit by Rs.6,750 Decrease profit by Rs.5,250 (2 marks)

< 71. Clamp fix Ltd. manufactures multipurpose woodworking clamps in a simple manufacturing process that uses Answer special equipment. The company is planning to drop the product line. The variable cost of the product is Rs.6 > per unit. Fixed overhead costs, exclusive of depreciation, have been allocated to this product at a rate of Rs.3.50 per unit and will continue irrespective of production. Depreciation on the special equipment amounts to Rs.20,000 a year. If the production of the clamp is discontinued, the special equipment can be sold for Rs.18,000. If production continues, the equipment will be useless for further production at the end of year 1 and will have no salvage value. The selling price of the clamp is Rs.10 per unit. The minimum number of units that would have to be sold in the current year to justify the continuation of the production is

(a) 9,500 units

(b) 3,000 units

(c) 5,000 units

(d) 4,500 units

(e) 12,500 units. (2 marks)

72. Which of the following statements is true? (a) Differential cost technique does not prove useful in decision making (b) Export orders should not be accepted at a price below the total cost, otherwise there will be a loss from export sales (c) A company with a higher break-even point is considered better than a company with a lower break-even point (d) In make or buy decision, suppliers offer price per unit is compared with own total cost per unit (e) Effect of price reduction is always to reduce contribution to sales ratio and increase the break-even point. (1 mark)

< Answer >

Suggested Answers Management Accounting I (151) January 20051. Answer : (c) Reason : Opportunity Cost is the cost of lost opportunities. Neither a Financial Accounting System nor a Managerial Accounting System measure the opportunity cost. Therefore, (c) is correct. Answer : (e) Reason : Management accounting is not mandatory. The application of management accounting can be extended beyond the traditional accounting system. It focuses more on the parts or segments of a company and less on a company as a whole. It is not governed by GAAP. It refers to reports prepared to fulfill the needs of management. Therefore, (e) is correct Answer : (e) Reason : A cost accounting system has numerous objectives, including product costing, assessing departmental efficiency, inventory valuation, product mix determination and planning evaluating and controlling operations. Determining sales commissions is not an objective of a cost accounting system because such commissions are based on sales, not costs. Answer : (b) Reason : The costs having clear relationship to output are known as engineered costs. Direct material cost is an example of engineered costs. Answer : (b) Reason : Under periodic cost accumulation system, the cost of goods manufactured is equal to cost of goods put into production plus beginning work-in-process less ending work-in-process. Therefore (b) is correct. Other options are not correct. Answer : (c) Reason : Decremental cost is not the cost of an added unit. Standard cost never tells us the actual cost of the product. Cost center and cost units are not the same thing. Cost of production is not equal to prime cost plus works cost. The correct statement is that the period cost is not assigned to products. It is a fixed cost and does not vary with the production. Therefore, ( c) is correct. Answer : (e) Reason : The amount of income tax is not considered in cost accounting. Other items given in (a), (b), (c) and (d) are considered in cost accounting. Answer : (a) Reason : The manager wants to control, and reduces if possible, the company's production costs. He must determine how production costs are related to and affected by various business activities. The manager needs to understand cost behaviors. A knowledge of cost behavior is useful because it helps managers forecast (plan) results under different activity levels Answer : (b) Reason : The average method of valuation of inventory in process costing is useful when prices are fluctuating from period to period. It is not useful in respect of other options (a),(c),(d) and (e). Answer : (b) Reason : Service companies do not have Inventory. So Managers of service companies do not analyze cost to properly value inventory. Therefore, option (b) is not correct.< TOP >

2.

< TOP >

3.

< TOP >

4.

< TOP >

5.

< TOP >

6.

< TOP >

7.

< TOP >

8.

< TOP >

9.

< TOP >

10.

< TOP >

11.

Answer: (d) Reason: Overhead absorption rate per rupee labor cost = Rs.3,00,000 / [(200 x Rs.75) + (300 x Rs.50) + (500 x Rs.40) = Rs.3,00,000 Rs. 50,000 = Rs. 6. Overhead applied: [(300 x Rs.75) + (350 x 50) + (400 x 40)] x 6 = (Rs. 22,500 + Rs. 17,500 + 16,000) x 6 = Rs.56,000 x Rs.6 = Rs.3,36,000 Over applied overhead: Rs.3,36,000 Rs.3,19,000 = Rs.17,000.

< TOP >

12.

Answer : (a) Reason : A stores assistant in a factory store is an indirect labor. Therefore (a) is correct. Other options mentioned in (b), (c), (d) and (e) are examples of direct labor. Answer : (d) Reason : Options (I) and (II) are true. But, option (III) is not, as cost centers because cost centers are departments and there may be several cost centers in a department, but not many departments in a cost center. Answer : (a) Reason : A direct cost can be specifically associated with a single cost object in an economically feasible way. An indirect cost cannot be specifically associated with a single cost object. Thus the specific cost object influences whether a cost is direct or indirect. For example, a cost might be directly associated with a single plant. The same cost however might not be directly associated with a particular department in the plant. Therefore (a) is correct. Option (b) is not correct because the timing of the cash outlay has no effect on whether a cost is direct or indirect. Option (c) is not correct because the behavior of cost in response to volume changes is a factor only if the cost object is a product. Options (d) and (e) are not correct because controllability and avoidability of costs have no effect on whether a cost is direct or indirect. Answer : (e) Reason : The purpose of cost allocation is to measure income and assets for external reporting. The other options given (a), (b), (c) and (d) are not the purposes of cost allocation. Cost allocation is a process of assigning and reassigning costs to cost objects. It is used for these costs that cannot be directly associated with a specific cost object. It is often used for purposes of measuring income and assets for external reporting purposes. It is less meaningful for internal purposes because responsibility accounting systems emphasize controllability, a process often ignored in cost allocation. Answer : (b) Reason : Service department costs are considered part of factory overhead and should be allocated to the production department that use the services. A basis reflecting causes and effect should be used to allocate service department costs. Units of electric power consumed i.e., the number of kilowatt hours used by each producing department is probably the best allocation base for electricity base. Option (a) is not correct because salary of service department employees is the cost allocated ,not a basis Option (c) is incorrect because making allocation on the basis of material usage may not meet the causeand-effect criterion. Option (d) and (e) are incorrect because making allocation on the basis of goods shipped and units sold may not meet the cause-and-effect criterion.

< TOP >

13.

< TOP >

14.

< TOP >

15.

< TOP >

16.

< TOP >

17.

Answer : (c) Reason : Let, at 100% capacity level, units produced = 100 At 60% capacity, the overhead recovery rate = Rs.17.50 per unit Therefore, total overhead at 60% = 60 Rs.17.50 = Rs.1,050 At 70% capacity, the recovery rate = Rs.16 per unit Therefore, total overhead at 70% = Rs.16 70 = Rs.1,120 Therefore, variable cost =Rs.1,120 Rs.1, 050 10 Rs.70 10

< TOP >

=

= Rs.7 per unit

Fixed cost = Total cost Variable cost = Rs.1,050 60 Rs.7 = Rs.630 At, 88% capacity = Rs.630 + 88 Rs.7 = Rs.630 + Rs.616 = Rs.1,246 Rate = Rs. 1,246 88 = Rs. 14.16. 18. Answer : (a) Reason : Beginning direct materials inventory Add: Purchases Less: Purchase returns Add: Transportation Total direct materials available Less: Ending direct materials inventory Direct material used Direct labor Total prime costs of Rs.3,00,000 (Direct labor) = Rs.6,81,000. 19. Answer : (d) Reason : Variable cost = Change of cost / change of activity = (Rs.18,000 Rs.10,000 ) / (7,000 3,000) = Rs.2. Fixed cost = Rs.18,000 7,000 x Rs.2 = Rs.4,000. Standard overhead = Rs.2.50. Standard fixed cost = Rs.2.50 Rs.2.00 = Re.0.50. Normal capacity level = Rs.4,000 / Re.0.50 = 8,000 hours.< TOP > < TOP >

1,34,000 1,89,000 (1,000) 3,000 3,25,000 (1,24,000) 2,01,000 3,00,000 5,01,000 Manufacturing cost = Rs.5,01,000 + 60%

20.

Answer: (e) Reason: Computation of comprehensive machine hour rate: Expenses Workings Rs. Rs. Standing charges: Rent, heat and light (Rs.70,000 / 70,000) x 2,500 2,500 Supervision Rs.1,50,000 / 25 6,000 Depreciation 10% of Rs.3,00,000 30,000 Reserve equipment cost Rs.2,000 / 25 80 Labor cost during setting 150 hours x Rs.8 1,200 and adjustment Hourly standing charges Rs.39,780 / 2,000 39,780 19.89 Machine expenses: Power 0.50 Labor cost Rs.8 / 2 4.00 Comprehensive machine hour rate 24.39 Answer : (d) Reason : Allocation of costs is a distribution of costs that cannot be directly assigned to the cost objects that are assumed to have caused them. An allocation of costs does not enable a company to determine why the sales of a particular product have increased. Many factors affect consumer demand such as advertising, consumer confidence, availability of substitutes and changes in tastes. Cost allocation is an internal matter that does not affect demand except to the extent it results in a change in price. Answer : (a) Reason : If predetermined overhead rate is not employed and the volume of production is increased over the level planned, the cost per unit will be reduced because fixed cost per unit will be reduced and variable cost per unit will remain same. Therefore, (a) is correct. Answer: (a) Reason: Machine operation charge per hour = Rs.60,000 / 600 = Rs.100; Machine operation charged to Q = Rs.100 x (600 hr. /4) = Rs.15,000; Machine operation charged per unit of Q = Rs.15,000 / 150 = Rs.100 per unit. Answer: (e) Reason: Cost to be Allocated / Cost Driver = Allocation Rate = Rs.81,400 / 74 = Rs.1,100 Allocation Rate x Cost Driver = Allocated Cost = Rs.1,100 x 20 employees = Rs.22,000. Answer : (c) Reason : Replacement cost is the cost at which there could be purchase of an asset identical to the one being replaced and hence it is equal to the current market price. Therefore (c) is correct. Answer: (c) Reason: The under or over applied overhead indicates that all of the inventory worked on during the period have been absorbed and need to be adjusted. This under or over applied overhead cost is to be allocated to work-in-process, finished goods and cost of goods sold. Therefore, (c) is correct. Answer : (b) Reason: Practical capacity is the maximum level at which output is produced efficiently, with an allowance for unavoidable interruptions. Because this level will be higher than expected capacity, its use will ordinarily result in under-applied fixed factory overhead. Other options are not correct.

< TOP >

21.

< TOP >

22.

< TOP >

23.

< TOP >

24.

< TOP >

25.

< TOP >

26.

< TOP >

27.

< TOP >

28.

Answer: (b) Reason: Product cost = Rs. 10,000 + Rs. 8,000 + Rs. 3,500 = Rs. 21,500 Cost of Goods Sold = Product Cost Rs.21,500 - Ending Inventory Rs.2,150 = Rs.19,350 (430 45) Sales Rs.25,000 - Cost of Goods Sold Rs.19,350 = Gross Margin Rs.5,650. Product Cost / units completed = Rs.21,500 / 50 units = 430 per unit The cost of 5 units inventory = Rs.430 x 5 = Rs.2,150.

< TOP >

29.

Answer : (d) Reason: Weighted Average Method: Input = 8,000 units + 34,000 units = 42,000 units; Out put = 36,000 units + 6,000 units = 42,000 units; Equivalent production units of conversion = 100% of 36,000 + 80% of 6,000 = 36,000 + 4,800 = 40,800 units; FIFO Method: Input = 8,000 units + 34,000 units = 42,000 units; Out put = 8,000 units + 28,000 units + 6,000 units = 42,000 units; Equivalent production units of conversion = 40% of 8,000 units + 100% of 28,000 units +80% of 6,000 = = 3,200 + 28,000 + 4,800 = 36,000 units. Excess equivalent units of production of conversion = 40,800 units 36,000 units = 4,800 units. Answer : (a) Reason : It is given in the question that the secondary distribution of service departrments overhead is pending. The same is thus attempted by use of simultaneous equation method. Let, total overheads of department S1 = x; and total overheads of S2 = y; According to problem, we get x = 16,000 + 0.1y and y = 24,000 + 0.2x; Therefore, x = 16,000 + 0.1(24,000 + 0.2x) = 16,000 + 2,400 + 0.02x Or, x (1 0.02) = 18,400, or, x = 18,400 / 0.98 = 18,775, then y = 27,755 Statement of secondary distribution:Particulars Direct allocation S1 (80% of 18,775) S2 (90% of Rs.27,755) Total Budgeted machine hours Overhead rate per machine hour P1 (Rs.) 48,000 3,755 2,776 54,531 5,000 10.91 P2 (Rs.) 1,12,000 7,510 16,653 1,36,163 12,000 11.35 P3 (Rs.) 52,000 3,755 5,551 61,306 6,000 10.22 Total (Rs.) 2,12,000 15,020 24,980 2,52,000

< TOP >

30.

< TOP >

31.

Answer : (d) Reason : Supplementary rates are used to carry out adjustment for the difference between overhead absorbed and overhead incurred. Therefore, (d) is correct. Other options are not correct.

< TOP >

32.

Answer : (d) Reason : Materials purchased = Rs.32,665 + Rs.8,635 Rs.7,120 = Rs.34,180 Total manufacturing costs =Direct material + Direct labor + 60% of Direct labor Rs.82,601 = Rs.32,665 + Direct labor + 0.6 Direct labor 1.6 direct labor = 49,936 Direct labor = Rs.31,210 Applied factory overhead = 60% of Rs.31,210 = Rs.18,726 Answer : (d) Reason : Operation Costing is a hybrid of Job-order and Process costing systems wherein materials are allocated on the basis of batches of production. It is used by companies that manufacture goods that undergo some similar and dissimilar processes. Operation costing accumulates total conversion cost for each operation. However direct material costs are charged specifically to products or batches as in job-order system. Answer : (c) Reason : Opening WIP Materials introduced Less: Closing WIP Completed units 3,000 units 13,000 units 16,000 units 4,000 units 12,000 units

< TOP >

33.

< TOP >

34.

< TOP >

Equivalent completed units (under average method) of materials in the process = 12,000 units + 50% of 4,000 units (closing stock) = 12,000 units + 2000 units = 14,000 units.

35.

Answer : (d) Reason : Statement of equivalent Production Unit (FIFO)Input Opening Introduced 450 4,10 0 Output Completed Opening Introduce d Closing 4,55 0 Costs during the month Cost per unit 450 3,58 0 520 4,55 0 Material 20% 1 00% 75% 90 3,580 390 4,060 Conversion 40% 1 00% 65% 180 3,580 338 4,098

< TOP >

Rs.71,05 0 Rs. 17.50

Rs.57,372 Rs. 14.00

The total cost of closing work-

in-process Material Conversion 390 Rs.17.50 338 Rs.14.00 = = Rs.6,825 Rs.4,732 Rs.11,557 36. Answer : (a) Reason : Input = 5,000 units. Main product = 80% of 5,000 units = 4,000 units. By-product = 16% of 5,000 units = 800 units Process loss = 4% of 5,000 units = 200 units Share of by-product: Material cost = 5,000 units x Rs.24.80 = (Rs.1,24,000 x 800 ) / 4,800 = Rs.20,667 Other cost = 60% of Rs.15,150 = (Rs. 9,090 x 800) / 4,800 = Rs.1,515 Power cost = 40% of Rs.15,150 = (Rs.6,060 x 2) / 5 = Rs.2,424 Total costs of by-product = Rs.20,667 + Rs.1,515 + Rs.2,424 = Rs.24,606.< TOP >

37.

Answer : (c) Reason :Material Input Units started 40,000 Output Completed % units Conversion % units

< TOP >

36,000 100% 36,000

100% 36,000

Normal loss 7.5%

3,000

100% 3,000 100% 1,000 40,000

75% 75%

2,250 750 39,000 Rs.70,200 Rs.1.80

Abnormal loss 1,000

Cost Cost per unit

Rs.90,000 Rs.2.25

Cost of

abnormal loss = 1,000 Rs.2.25 + 750 Rs.1.80 = Rs.2,250 + Rs.1,350 = Rs.3,600. 38. Answer : (b) Reason : Rs. Total manufacturing Costs Less: Overhead costs: Indirect labor Factory overhead Indirect material Freight in Less: Add: Less: Direct labor Material consumed Closing material Opening material Material purchased 12,160 31,730 21,390 65,280 5,570 70,850 1,23,230 32,640 90,590 9,640 1,00,230 11,620 88,610 1,94,080 Rs.< TOP >

39.

Answer : (d) Reason : Particulars Fixed expenses: Salary of Manager Accountant Cleaner Mechanic Garage rent Insurance:5% on 5 2, 70, 000 12

< TOP >

Per month 6,500 5,000 800 2,200 2,000

Per km.

5,625 25,000 1,750 48,875

Drivers salary (Rs.5,000 5) Annual taxRs.4, 200 5 12

Effective km = Rs.4,500 .8 5 = 18,000 Depreciation Rs.2,70,000 (3,00,000 .8) Repairs Rs.2,000 (12 3,600) Petrol (4,500 Rs.36) (5.62 3600) Oil and other sundries (Rs.10 4,500)(100km 3,600) Cost of plying taxi per km.

2.72 1.13 0.05 8.00 0.13 12.03

40.

Answer : (e) Reason :Input units Opening 1,200 WIP From 1,12,00 process 0 1 Opening Process 1 Normal loss Abnormal Loss Closing WIP 1,13,20 0 Units Materials 1,200 1,04,20 100% 0 5,600 600 100% 1,600 100% 1,13,20 0 Conversion 50% 600

< TOP >

1,04,20 100% 1,04,200 0 600 1,600 75% 1,06,40 0 1,200 1,06,000

Particulars Materials From Process 1 Process 2 Equivalent units Cost per unit Conversion cost Equivalent units Cost per unit

Rs. 1,87,704 47,972 2,35,676 1,06,400 2.215 63,176 1,06,000 0.596 Rs. 3,009 2,30,803 62,461 2,96,273

Finished goods: Opening WIP Process I (1,04,200 Rs.2.215) Conversion cost (1,04,800 0.596) Rs. Materials 1,600 Rs.2.215 Conversion 1,200 0.596 3,544 715 4,259

Closing

WIP:

41.

Answer : (d) Reason : Joint costs = Material cost + Processing cost = Rs.16.56 + Rs.42 = Rs.58.56 lakhs Net realizable value (NPV): Product A = Rs.69 Rs.18 B= Rs.6 Rs.3.60 C= Rs.2.40 0 D= Rs.18.00 Re.0.60Rs.51.00 Rs.73.20

< TOP >

Rs. (in lakhs) = Rs.51.00 = Rs. 2.40 = Rs. 2.40 = Rs.17.40 Rs. 73.20

A

=

Rs.58.56

= Rs.40.80 = = = Rs.58.56 Rs.58.56 Rs.58.56 Rs.2.40 Rs.73.20 Rs.2.40 Rs.73.20 Rs.17.40 Rs.73.20

B C D

= Rs.1.92 = Rs.1.92 = Rs.13.92 (Rs. in lakhs)B (Rs) 2.70 6.00 3.30 3.60 (0.30) 2.70 1.92

Sales at split-off point Sales after split-off point Incremental sale Incremental cost Profit (loss) Profitability St: Sale at split-off point Sale after processing Less cost: Pre Post Profit Total Profit

A (Rs) 45.00 69.00 24.00 18.00 6.00 69.00 40.80 18.00

C (Rs) 2.40 2.40 NIL NIL 2.40 1.92

D (Rs) 16.20 18.00 1.80 0.60 1.20 18.00 13.92 0.60

10.20 14.94

0.78

0.48

3.48< TOP >

42. 43.

Answer : (a) Reason : If the batch size increases, setting up cost per unit decreases. Similarly, if the batch size decreases, setting up cost per unit increases. Therefore, (a) is correct. Answer: (b) Reason: Cost per equivalent unit of ending inventory = Rs.10.00 x 3,000 equivalent units in ending inventory = Rs.30,000. Equivalent units 15,000 completed + 3,000 in ending inventory (60% x 5,000) = 18,000 equivalent units. Total cost = Material Rs.170,000 + labor 4,000 + applied overhead Rs. 6,000 (400 hours x Rs.15/hour). = Rs.1,80,000 (Overhead rate = Rs. 6,450 430 = Rs. 15) Cost per unit = Rs.180,000/18,000 = Rs.10.00 per equivalent unit.

< TOP >

44.

45.

Answer : (e) Reason : Let x = total cost and y = profit per unit of product whose selling price is Rs.45,000 x + y = Rs.45,000. Statement showing the present and anticipated cost Present Increase Anticipated Particulars % cost (Rs.) (Rs.) cost (Rs.) Direct material 0.5x 15 0.075 0.575x Direct labor 0.2x 25 0.050 0.250x Overhead costs 0.3x 0.300x x 0.125x 1.125x The increase in the cost of direct material and wages has reduced the present profit by 25%. 1.125x + 0.75y = Rs.45,000 Solving above 2 equations, we get x = Rs. 30,000 y = Rs.15,000 Statement showing profit per unit: Direct Material 0.5x Rs.15,000 Direct Labour 0.2x Rs. 6,000 Overhead 0.3x Rs. 9,000 Total cost Rs. 30,000 Profit (50% of cost or 33-1/3% of S.P) Rs. 15,000 Selling price Rs.45,000 Statement of required selling price Rs. Direct Material 0.575 of Rs.30,000 17,250 Direct Wages 0.250 of Rs.30,000 7,500 Overhead 0.300 of Rs.30,000 9,000 Total anticipated cost 33,750 Profit 33-1/3% of sales or 50% of cost 16,875 Selling price 50,625 Answer : (e) Reason : At 50,000 units the total cost is Rs.30,000 other than additional Rs.4,000. At 20,000 units, total costs is Rs.21,000 Variable cost = Change of cost / change of activity = (Rs.30,000 Rs.21,000) / (50,000 20,000) = 0.30 Fixed cost = Rs.21,000 20,000 x 0.30 = Rs.15,000 ; At 30,000 units = 30,000 x 0.30 + Rs.15,000 = Rs.24,000 ; Total cost = Rs.24,000 + Rs.4,000 (additional cost) = Rs.28,000 Cost per unit = Rs.28,000 / 30,000 = Re. 0.93.

< TOP >

< TOP >

46.

Answer : (b) Reason : Input = 6,000 units + 14,000 units = 20,000 units; Out put = 12,000 units + 8,000 units = 20,000 units; Equivalent production of materials = 100% of 12,000 units + 100% of 8,000 units = 20,000 units; Equivalent production of conversion = 100% of 12,000 units + 75% of 8,000 units = 18,000 units; Material costs per unit = (Rs.12,000 + Rs.29,000 + Rs.2,500 + Rs.5,500) / 20,000 units = Rs.2.45 Conversion cost per unit = (Rs.1,000 + Rs.5,000) / 18,000 units = Re.0.33 Total cost per unit of finished goods = Rs.2.45 + Re.0.33 = Rs.2.78. Answer : (b) Reason : Total process cost = Rs.49,263 + Rs.1,480 + Rs.6,500 + Rs.1,605 + 168% of Rs.6,500 = Rs.58,848 + Rs.10,920 = Rs.69,768. Let, the unit of normal loss = x, No. of finished product units =9,120 x; value of normal loss = Rs.x Cost of finished goods per unit = Rs.10 20% of Rs.10 = Rs.8 Cost of finished goods + value of normal loss = Total cost of process Rs.8x (9,120 x) + x = Rs.69,768 Rs.72,960 Rs.7x = Rs.69,768 Rs.7x = Rs.3,192 ; x = 456 units. Percentage of normal loss = 456 / 9,120 = 5%. Answer : (d) Reason : Break up of the total units is Main product 75% of 1,000 = 750; By-product 20% of 1,000 = 200; Loss = 5% of 1,000 = 50 ; Statement showing the ascertainment of cost STATEMENT SHOWING THE ASCERTAINMENT OF COSTMain Product Total Cost Rs. 17,000 5,300 2,400 24,700 Total cost Rs. 15,000 4,500 1,800 21,300 Cost per unit Rs. 20.00 6.00 2.40 28.40 By product Total cost Rs. 2,000 800 600 3,400 Cost per unit Rs. 10.00 4.00 3.00 17.00

< TOP >

47.

< TOP >

48.

< TOP >

Particulars Materials Labour

Ratio 15:2 45:8

Overheads 3:1

Scrap

realized

(Rs.300)

is

deducted from overheads. Material ratio between the main product and by-product 750 x 2 = 1,500 ; 200 x 1 = 200 ; Ratio is 15:2 Labor ratio between the main product and by-product 750 x 3 = 2,250 ; 200 x 2 = 400 ; Ratio is 45:8

49.

Answer : (e) Reason : The correct answer is (e). Process costing is used for continuous manufacturing of relatively homogeneous units. Newspapers are published in long runs of identical items, hence process costing is indicated. (a), (b), (c) and (d) are not correct because they involve unique projects which require job-order costing. Answer : (a) Reason : Work-in-Process = Work certified + Work uncertified Profit in reserve Progress payment received = Rs.60,60,000 + Rs.4,25,000 *Rs.4,95,030 Rs.50,00,000 = Rs.9,89,970 Plant= Rs.18,00,000 Rs.1,75,000 = Rs.16,25,000 Total= Rs.9,89,970 + Rs.16,25,000 = Rs.26,14,970. Working:Particulars To Material issued To Wages Direct Accrued To Wages related cost To Plant hire charges To Site office cost To Planning & estimating cost To Head office expenses appr. To Direct expenses To Depreciation To Notional profit To Profit & loss A/c:2 50, 00, 000 11, 00, 200 3 60, 60, 000

< TOP >

50.

< TOP >

Rs. Particulars 30,80,000 By Work-in-Progress: 12,30,000 Work certified 55,500 Work not certified 92,600 By Material 1,82,000 Returned from site 26,400 At site 4,80,000 80,500 85,300 1,75,000 11,00,200 65,87,500

Rs. 60,60,000 4,25,000 42,500 60,000

65,87,500

To Reserve

6,05,170 By *4,95,030 11,00,200

Notional Profit

11,00,200 11,00,200< TOP >

51.

Answer : (c) Reason : If the cost of the by-product is apportioned to joint products, it is made at notional sales value at separation point. Other options are not appropriate for apportionment of by-product to joint products. Answer : (e) Reason : In contract costing, parts of the profit of incomplete contracts are credited to general profit and loss account. Rest part of the profit is kept as reserve for future loss. Therefore, (e) is correct. Answer : (b) Reason : Abnormal loss should be classified as period cost. If the wastage is normal, it should be product cost. Abnormal loss cannot be deferred charge, joint cost or discretionary cost. Therefore, (b) is correct. Answer : (d) Reason : Allocating overheads on the basis of units of production is generally not appropriate. However, if a firm manufactures only one product, this allocation method may be acceptable because all costs are to be charged to the single product. Other points mentioned in (a), (b), (c) and (e) are not true.

52.

< TOP >

53.

< TOP >

54.

< TOP >

55.

Answer : (b) Reason : BEP = Upto the product of 7,500 units BEP = = = 8,000 units. At any production level greater than 7,500 units, total fixed costs are Rs.1,20,000 but there are two contribution margin. The first 7,500 units sold will produce a contribution margin of Rs.75,000 (i.e. 7,500 Rs.10). Hence, the other Rs.45,000 (i.e. Rs.1,20,000 Rs.75,000) must be contributed. The contribution per unit is Rs.12.50 (i.e. Rs.25 50% of Rs.25) Therefore, BEP = Rs.45,000 Rs.12.50 = 3,600 units. Therefore, Total BEP = 7,500 units + 3,600 units = 11,100 units.Rs.80, 000 Rs.25 60% of Rs.25Rs.80, 000 Rs.10

< TOP >Fixed cos t Contribution per unit

56.

Answer : (b) Reason : Plant Capacity operated X 100% (Rs. in lakh) Turnover Variable cost Contribution Fixed cost merged plant =350 100 = 35% 1000

< TOP >

Y 100% (Rs. in lakh) 400 300 100 50

Z 100% (Rs. in lakh) 300 150 150 62

Merged 100% (Rs. in lakh) 1,000 650 350 182 P/V ratio of

300 200 100 70

Break even point of merged plant =

Fixed cos t 182 = = Rs.520 lakhs P / V ratio 35%

Break even capacity = (520/1,000) 100 = 52%

57.

Answer : (a) Reason : Sales (9,000 Rs.28) Variable Costs (9,000 Rs.19) Contribution Margin Fixed costs Net Income under variable costing Using Absorption Costing: Sales Cost of goods sold (*23.80 9,000) Net Income under absorption costing 2,52,000 2,14,200 37,800 Net income increased by Rs.37,800 2,52,000 1,71,000 81,000 48,000 33,000

< TOP >

Rs.33,000 = Rs.4,800 under absorption costing. * Total cost per unit = Variable cost + Fixed cost = Rs. 19 + (12,000 x Rs.4) / 10,000 = Rs. 23.80. 58. Answer : (d) Reason : Cost-volume-profit analysis is important for the determination of relationship between revenues and costs at various level of operation. Other options (a), (b), (c) and (e) are not correct in respect of cost-volumeprofit analysis. Therefore, (d) is correct.< TOP >

59.

Answer : (e) Reason: The prime cost basis combines the total of direct materials cost and direct labor cost and uses this total as a basis for charging overheads. It considers both materials and labor in charging overhead to each job or product. This method is not suitable in capital intensive organisation. It is useful in cases where there are no wide fluctuations in processing. This statement is false. Other statements given in (a), (b), (c) & (d) are correct. Answer : (d) Reason : In a variable costing system, only the variable manufacturing costs are recorded as product costs. All fixed manufacturing costs are expensed in the period incurred. Because changes in the relationship between production levels and sales level do not cause changes in the amount of fixed manufacturing costs expensed, profits more directly follow the trends in sales. Other options are not correct. Answer : (e) Reason : Contribution to sales ratio =Contribution per unit Sales per unit

< TOP >

60.

< TOP >

61.

< TOP >

= According to above relation, contribution to sales ratio does not depend upon the total fixed cost, fixed cost per unit, volume of sales or production. It depends upon the direct expenses which are the components of variable costs. 62. Answer: (c ) Reason: All cost systems utilize some form of cost averaging and estimation. Therefore, (c) is correct.< TOP >

Sale Pr ice per unit Variable cos t per unit Sale price per unit

63.

Answer: (a) Reason: Sales mix of products A:B:C = 1:3:6 or 10% of A, 30% of B and 60% of C Total contribution of the sales mix = Proportionate contribution of A + Proportionate contribution of B + Proportionate contribution of C = 10% of Rs.12 + 30% of Rs.10 + 60% of Rs.8 = Rs.9. Break-even sales units = (Rs.18,000 + Rs.9,000) / Rs.9 = 3,000 units. Break-even sales units of product B = 30% of 3,000 = 900units. Break-even sales of product B = 900 x Rs.20 = Rs.18,000. Answer : (c) Reason : Sales for 2004-05 = Variable cost + Fixed cost Loss = Rs.7 x 10,000 units + Rs.25,000 Rs.5,000 = Rs.90,000, Selling price per unit = Rs.90,000 / 10,000 = Rs.9. Contribution required for 15,000 units = Rs.25,000 + Rs.5,000 = Rs.30,000 Contribution from 15,000 units = 15,000 units (Rs.9 Rs.7.50) = Rs.22,500 Additional contribution required from additional units = Rs.30,000 Rs.22,500 = Rs.7,500 Units required to earn contribution of Rs.7,500 = Rs.7,500 / (Rs.9 Rs.8.50) = 15,000 units Proposed sales = 15,000 units + 15,000 units = 30,000 units Required increase in sales = 30,000 units 10,000 units = 20,000 units Percentage increase required = (20,000 / 10,000) x 100 = 200% Answer : (d) Reason : If the company buys from the market, the avoidable unit cost = Rs.4.00 + Rs.4.80 + Rs.3.20 + 40% of Rs.1.25 = Rs.12 + Re.0.50 = Rs.12.50. Answer : (d) Reason : Costs, which can be reduced or removed from the companys cost structure without affecting product or service quality for the customer, are referred to as non-value-added costs. Non-value-added costs can be removed without changing the customer's perceived value of the company's service or product. They are costs typically associated with activities such as transporting materials, verifying data, or transferring papers from one department to another. Therefore, (d) is correct. Answer : (c) Reason : Contribution = Rs.100Rs.80 = Rs. 20 Existing P/V ratio = 20/100 100 = 20% New variable cost = Rs.81 When variable cost is Rs. 80 selling price Rs.100 When variable cost is Rs.81 selling price (Rs.101.25 Rs.100) / Rs.100 = 1.25%. Selling price to be raised by 1.25%.81 100 = Rs.101.25 80

< TOP >

64.

< TOP >

65.

< TOP >

66.

< TOP >

67.

< TOP >

68.

Answer: (a) Reason: A contribution per hour: (Rs.29 Rs.14) / 1.5 = Rs.10; Contribution per hour of B = (Rs.19 Rs.12) / 0.50 = Rs.14; so it would be best to satisfy the demand for B before we produce any of A, given the limited hours available. The company must produce B first: 1700 x 0.50 = 850 hours; 1,300 - 850 = 450 hours left; 450 / 1.5 = 300 units of A. Answer : (b) Reason : Product A B C D Sales Mix 40 10 30 20 Sales (Rs. Lakh) 32 8 24 16 TotalContribution 100 Sales

< TOP >

69.

< TOP >

Contribution (Rs. Lakh) 6.40 0.48 2.88 1.60 11.36 PV ratio =

=

11.36 100 = 14.2% 80

70.

Answer: (c) Reason: Total cost per unit = Rs.29; Fixed cost per unit at 50,000 units = Rs.4,00,000 / 50,000 = Rs.8. Variable cost per unit = Rs.29 Rs.8 = Rs.21; Additional graphics cost per unit = Rs.3,000 / 1,500 = Rs.2 per unit. Cost savings = Commission + packing cost = Rs.2.50 + Rs.1.50 = Rs.4.00. Therefore, net cost = Rs.21 + Rs.2 Rs.4 = Rs.19. Net profit per unit = Rs.22.50 Rs.19.00 = Rs.3.50 Total profit = 1,500 x Rs.3.50 = Rs.5,250. Answer : (d) Reason : The minimum number of units is equal to fixed costs divided by the difference between unit selling price and unit variable cost i.e., unit contribution margin. Rs.18,000 salvage value, the cash flow to be received if production is discontinued, is treated here as a fixed cost. Hence, continuation of the product line will permit the firm to break even or make a profit only if the total contribution margin is Rs.18,000 or more. Minimum no of units = Rs.18,000 (Rs.10 Rs.6) = 4,500 units Fixed overhead allocation is not considered in this calculation because it is not a cash flow and will continue regardless of the decision.

< TOP >

71.

< TOP >

72.

Answer : (e) Reason : Effect of price reduction is always to reduce contribution to sales ratio and increase the break-even point, because contribution is the result of difference between sales and variable cost. Therefore, (e) is true. Other options (a), (b), (c) and (d) are not correct.< TOP OF THE DOCUMENT >

< TOP >