5
INSTANT TOOL HIRE FOR ALL INDUSTRY – www.cwplant.co.uk 106 PUMPS PUMPS Ideal for emptying pools, flooded basements and drains. Designed to be used fully submerged. Capable of dry running for a period. CODE No. 1 DAY WEEKEND WEEK Technical Data PMP-S1 37.00 46.00 58.00 PMP-S2 62.00 76.00 95.00 PMP-S3 82.00 108.00 136.00 1inch 2inch 3inch Max flow rate 160ltrs per min 220ltrs per min 300ltrs per min 36gls per min 48gls per min 67gls per min Max pumping height 6m 11m 18m SUBMERSIBLE PUMPS Able to pump water down to 1mm, making it suitable for pumping Iarge or small areas of nuisance water found on flat surfaces. 1 DAY WEEKEND WEEK Technical Data CODE No. PMP-P1 62.40 76.80 96.00 1" PUDDLE PUMP 106 2" DIAPHRAGM PUMP 2" & 3" CENTRIFUGAL PUMP - Petrol A general purpose, lightweight, reciprocating diaphragm pump. Versatile in application, the pump will handle site water, slurries, sand and similar abrasives. CODE No. 1 DAY WEEKEND WEEK PMP-2DP (Petrol) 75.50 100.80 126.00 PMP-2DD (Diesel) 79.50 105.60 132.00 Technical Data db(a) db(a) 87.5 db(a) db(a) 103 For rapid removal of water from drains, foundations and pools. Supplied with standard 6 metre hose. 1 DAY WEEKEND WEEK Technical Data CODE No. PMP-2CP - 2" 65.00 74.50 93.00 PMP-3CP - 3" 77.00 88.00 110.00 Max flow rate 570ltrs/130gls per min Max solids size 6mm Max suction lift 8.5m Max discharge head 34m Max flow rate 185ltrs/41gls per min Max solids size 20mm Max suction lift 6.0m Max discharge head 18.3m Max flow rate 160ltrs/36gls per min Max pumping height 11m 16 Hire Depots - Serving South, West & North of England 16 Hire Depots - Serving South, West & North of England EXTRA HOSES EXTRA DELIVERY HOSE 2" / 3" Lay flat POA EXTRA SUCTION HOSE 2" / 3" POA CODE No. PMP ZACC Pumps should not be allowed to run dry unless they specifically state that they are suitable to do so.

11 Pumps & Plumbing 02 06...PMP-P1 62.40 76.80 96.00 1" PUDDLE PUMP 2" & 3" CENTRIFUGAL PUMP - Petrol 2" DIAPHRAGM PUMP A general purpose, lightweight, reciprocating diaphragm pump

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

  • INSTANT TOOL HIRE FOR ALL INDUSTRY – www.cwplant.co.uk106

    PUMPSPUMPS

    Ideal for emptyingpools, floodedbasements anddrains. Designedto be used fullysubmerged.Capable of dryrunning for a period.

    CODE No. 1 DAY WEEKEND WEEK

    Technical Data

    PMP-S1 37.00 46.00 58.00PMP-S2 62.00 76.00 95.00 PMP-S3 82.00 108.00 136.00

    1inch 2inch 3inchMax flow rate 160ltrs per min 220ltrs per min 300ltrs per min 36gls per min 48gls per min 67gls per min

    Max pumping height 6m 11m 18m

    SUBMERSIBLE PUMPS

    Able to pump water down to 1mm, making it suitable forpumping Iarge or small areas of nuisance water found on flatsurfaces.

    1 DAY WEEKEND WEEK

    Technical Data

    CODE No.

    PMP-P1 62.40 76.80 96.00

    1" PUDDLE PUMP

    106

    2" DIAPHRAGM PUMP2" & 3" CENTRIFUGAL PUMP - Petrol

    A general purpose, lightweight, reciprocating diaphragm pump.Versatile in application, the pump will handle site water, slurries, sand and similar abrasives.

    CODE No. 1 DAY WEEKEND WEEK

    PMP-2DP (Petrol) 75.50 100.80 126.00PMP-2DD (Diesel) 79.50 105.60 132.00

    Technical Data

    db(a)db(a)87.5

    db(a)db(a)103

    For rapid removal of water from drains, foundations and pools.Supplied with standard 6 metre hose.

    1 DAY WEEKEND WEEK

    Technical Data

    CODE No.

    PMP-2CP - 2" 65.00 74.50 93.00PMP-3CP - 3" 77.00 88.00 110.00

    Max flow rate 570ltrs/130gls per minMax solids size 6mm

    Max suction lift 8.5mMax discharge head 34m

    Max flow rate 185ltrs/41gls per minMax solids size 20mm

    Max suction lift 6.0mMax discharge head 18.3m

    Max flow rate 160ltrs/36gls per min Max pumping height 11m

    16 Hire Depots - Serving South, West & North of England

    16 Hire Depots - Serving South, West & North of England

    EXTRA HOSESEXTRA DELIVERY HOSE 2" / 3" Lay flat POAEXTRA SUCTION HOSE 2" / 3" POA

    CODE No. PMP ZACC

    Pumps should not beallowed to run dry unlessthey specifically state thatthey are suitable to do so.

  • 3" STORM PUMP

    INSTANT TOOL HIRE FOR ALL INDUSTRY – www.cwplant.co.uk 107

    These robust high performance pumps with indefinite dry running ability are particularly suitable for water companies,and high flow applications. Offers easy operation.

    CODE No. 1 DAY WEEKEND WEEK

    PMP-3D 100.00 123.00 154.00

    Designed to pump liquids containing sand-sewage and semisolids (4” - 40mm Dia - 6”- 65mm Dia). Typical uses are waterremoval from excavations, manholes and flood water control.Oil immersed bearings allow for dry running.

    3" SPATE PUMP

    The Spate handles dirty water, slurries, light and heavy oils, petroleumindustry products, including some of the more viscous liquids. It isalso well suited to a variety of demanding site conditions.

    CODE No. 1 DAY WEEKEND WEEK

    Technical Data

    PMP-3C 94.00 116.00 145.00

    4" (100mm) 6" (150mm)

    db(a)db(a)88.0

    db(a)db(a)91.1

    Technical Data

    INSTA

    NT TO

    OL HIRE FOR ALL INDUSTR

    Y – w

    ww.cwplant.co.uk Telephone your nearest Hire Depot

    PUMPS

    & PLU

    MBING

    107

    4150 MAX - 3900 MIN.

    1778

    MA

    X-1

    718

    MIN

    .

    450

    8 50

    3820 MAX3570 MIN.

    495

    MA

    X43

    5M

    IN

    CODE No. PMP-4 MINIMUM WEEK POACODE No. PMP-6 MINIMUM WEEK POA

    CODE No. PMP-ZACC

    Technical Data

    4"/6" HIGH PERFORMANCE - SILENCED ROAD TOW PUMPS

    db(a)db(a)93.94" 6"

    db(a)db(a)97.9

    Max flow rate 1000ltrs/238gls per minMax solids size 29mm

    Max suction lift 8.8mMax discharge head 23.5m

    Max flow rate 370ltrs/82gls per minMax solids size 40mm

    Max suction lift 7.3mMax discharge head 20m

    Max flow rate 730gls per min 1390gls per min 3330ltrs per min 6330ltrs per minMax solids size 40mm 65mmMax suction lift 8.5m 8.5mMax discharge head 28m 25mFull load running time 38hr 26hr

    HOSE - (Additional Hose)DELIVERY (6m length) WEEK 26.00 SUCTION (6m length) WEEK 34.00

  • INSTANT TOOL HIRE FOR ALL INDUSTRY – www.cwplant.co.uk108

    CODE No. PB-016 Min WEEK

    Technical Data

    Hand Held POADouble Head POATriple Head POAQuadruple Head POA

    Seals awkward or deformed pipes.

    GULLEY SCOOPThe hygienicsolution to theproblem ofremoving gardendebris and siltfrom drains.

    CODE No. WEEK

    Technical Data

    PB-024 30.00

    Weight 2kg

    BLOW TORCH Single, Double, Triple & Quadruple Head

    DRAIN TEST KIT

    Tests drains to buildingregulations standard,accurate pressure difference and u-gaugeleak detection.

    CODE No. PB-002 WEEK 22.00

    Technical Data

    Technical Data

    Weight 1.5kg

    DRAIN RODS AND ACCESSORIES

    DRAIN STOPPERSCreates an airtight seal forpressure testing or trappingdebris.

    CODE No. Size mm WEEK

    PB-004 100 POAPB-005 375-525 POA

    The traditionaltool for unblockingand cleaning, suppliedin convenient 1 metre sections which screw together.

    10 x 1m included.

    Technical Data Weight 3.5kg

    CODE No.PB-003 MINIMUM WEEK 29.50

    AIR BAG c/w PUMP

    CODE No. WEEK

    Technical Data

    PB-001 POA

    Health & SafetyWeil’s Disease is a serious and sometimes fatal infection that is transmittedto humans by contact with urine from infected rats. Always use Personal

    Protective Equipment when coming into contact with water.

    STILSONS

    For gripping pipes solidly,our range of hand heldtools will deal with pipesup to 6" in diameter.

    CODE No WEEK

    SPT-STIL 30.50

    Technical Data

    Single

    Double

    Triple

    Quadruple

    108

    PLUMBINGPLUMBING16 Hire Depots - Serving South, West & North of England

    16 Hire Depots - Serving South, West & North of England

  • INSTANT TOOL HIRE FOR ALL INDUSTRY – www.cwplant.co.uk 109

    HANDHELD ELECTRIC PIPE THREADER

    Portable, electric, pipe threader for all tight positions and pipework that is already in place. Suitable for 1/2"(13mm)-2"(50mm) BSP gas, steam or water pipes.

    CODE No. 1 DAY WEEKEND WEEK

    Technical Data

    Technical Data

    PB-031 91.00 112.00 140.00

    Voltage 110v Weight 21kg

    RATCHET PIPE THREADER (MANUAL)

    Just the tool for pipework that is already in place. Suitable for 1/2"(13mm) - 2"(50mm) BSP gas, steam or water pipes.

    CODE No. WEEK

    Technical Data

    PB-015 65.00

    Weight 8kg

    For threading, cutting or reaming of steel. This machine willtackle any job up to 3"(75mm). It is powerful, robust and idealfor major installation projects.

    CODE No. 1 DAY WEEKEND WEEK

    Technical Data

    PB-018 152.00 188.00 235.00

    Voltage 110vPower Rating 1140w

    Weight 108kgCapacity 50mm-75mm/2"- 3"

    PIPE VICE & STANDFirmly holds pipes up to2"(50mm) diameter to ensureaccurate cutting or threading.

    CODE No. WEEK

    PB-011 38.00

    Weight 22kg

    HYDRAULIC PIPE BENDERFor bending 1/4"(10mm) to 2"(50mm)thick walled steel pipe. Will bend pipe up to 90°.

    CODE No. WEEK

    Technical Data

    PB-019 150.00

    Capacity 1/4"(10mm) to 2"(50mm)Max Wall Thickness 4.5mmWeight 82kg

    PIPE BENDER

    Capable of precisionbends without creasingof the tube.

    CODE No. WEEK Technical Data

    PB-023 40.00 Pipe Sizes 15 - 42mm/0.6" - 1.7"Weight 30kg

    CODE No. WEEK

    Technical Data

    PB-010 60.00

    Weight 11kg

    For cutting clay,cement and cast-iron pipes.

    db(a)db(a)108

    db(a)db(a)80.0

    INSTA

    NT TO

    OL HIRE FOR ALL INDUSTR

    Y – w

    ww.cwplant.co.uk Telephone your nearest Hire Depot

    PUMPS

    & PLU

    MBING

    PIPE THREADING MACHINE

    m/s2m/s22.5

    SOIL PIPE CUTTER

    109

  • INSTANT TOOL HIRE FOR ALL INDUSTRY – www.cwplant.co.uk110

    CENTRAL HEATING FLUSHER

    A professional trade descaling unit to flush out central heatingsystems and remove harmful iron oxide deposits, which causesradiator cold spots and blockages.

    CODE No. 1 DAY WEEKEND WEEK

    Technical Data

    PB-032 110.00 136.00 170.00

    Voltage 240vCapacity 24ltrs

    Total Head 12m at 60ltrs/minWeight 12kg

    PIPE FREEZING KIT

    Plumbing repairs are made easier with the electric pipe freezingkit, no need to drain down the system. This easy to operatemachine simply freezes the water which is already in the pipesto create two ice plugs.

    CODE No. 1 DAY WEEKEND WEEK

    Technical Data

    PB-008 Elec 90.60 111.60 139.50PB-007 Co2 Cylinders 50.00 61.60 77.00

    Voltage 240/110vPower Rating 310w

    Weight 23kgCapacity 8 - 42mm

    PIPE PRESSURE TESTER PRESSURE TEST PUMP 110v

    For testing pipe work following installation or repairs.

    CODE No. WEEK

    Technical Data

    PB-014 58.00

    Maximum Pressure 60bar Weight 7kgReservoir Capacity 13.5ltr

    This machine is ideal for filling and testing all types of installations which have to be leak-proof.e.g. Sprinkler systems, heating systems, small bore pipelines.

    CODE No. 1 DAY WEEKEND WEEK

    Technical Data

    PB-013 78.00 96.00 120.00

    Voltage 110v Weight 25kgPressure 750psi - 50bar

    Boiler manufacturers insist that old heating systems bethoroughly flushed before installing a new boiler and mayeven make a warranty condition on this. Only by flushing

    can you be sure that a system is really clean.

    110

    16 Hire Depots - Serving South, West & North of England

    16 Hire Depots - Serving South, West & North of England