Upload
cellnetrix
View
485
Download
4
Embed Size (px)
Citation preview
IoT eSIM Test Bed Fast Prototyping of IoT Devices with GSMA eSIM
UnderstandingIoTMarketDevelopment
▸ Internet of things is where objects connect to each other directly
▸ Number of connected devices and connections will grow rapidly over next few years at a CAGR of 29.98% during the period 2016-2020
▸ eSIM will dominate the M2M market, counting 50% of connections by 2020, says Juniper
▸ New LPWA access technologies including NB IoT
▸ Introduction of 5G Standards
▸ Most communicating objects will be simple low power IoT devices with low or no security at all
Marketrequirements
Numberofconnecteddeviceswillgrowdrama=callyovernextfewyears.IoTisamaindriver
96%
Ofglobalpopula+onhasacellularsubscrip+on
Marketevolu+onandinnova+on
IoTmakesmachinestalktoeachother
25Billion
2020
Thenumberofconnectedcellulardeviceswillreach
Faster=metomarketisrequired
CellnetrixoffersfastprototypingservicesfordeviceswithGSMAeSIM
Buildingblocksofourtechnology
IoTPrototypingandcommunica=onboards
ConceptIoTDeviceWithtouchscreenand
differentsensors
GSMAIoT.eSIM
Applica=onsRoaming,EAP-TLSAuthen+ca+on,MobilePKI,PKCS#15/SEAC
MiddlewareReferenceimplemen-ta+onsofLPAs
Variousformfactors
Easyintegra+onofvariousIoT
boards
CelsiumSM-DP+PlaUormGSMARemoteSIMProvisioning2.0
SoVware2G/3G/LTERadio
ConnectedtoIoTClouds
IoTTestBedArchitecture
Sensor Node
Sensors
Software radio YateBTS with USRP B210
GSMA RSP eSIM
Ø The complete system can be prototyped on the table including: subscription management platform, software radio, IoT boards and sensors.
Ø There are MQTT connectors to enable data publishing to IoT clouds
IoT Clouds
IoT prototyping board with cellular module
GSMA Subscription and device management platform
SupportedLPAconfigura=ons
Ø LPA in a device (LPAd) provides a full flexibility to order, download and manage eUICC profiles. Can be used for different devices with or without UI
Ø LPA in IoT.SIM (LPAe) provides out of the box agent enabling basic provisioning operations such as profile activation relying on modem BIP support. Ideal for M2M only devices without UI.
IoT Test Bed supports 2 LPA configurations:
IoT.SIM-based
Device-based
SupportedeSIMformfactors
Ø GSMA-based eSIM compliant solution for emerging IoT market including wearables and data only devices
Ø eSIM in SIM-form factor
Ø Software eSIM Stack runnable at application processor or baseband
In order to support different applications 3 configurations are provided:
WLCSP
SoRwareTEE
2FF3FF4FF
Hardware
SoVware
ASIC
ASIC
DFN6/DFN8
Devicemanager
Device life cycle
Ini+alized
Preini+alized
ProvisionedDisabled
DevicedeploymentwitheSIM
▸ Vanilla, not activated, device without bootstrap subscription
▸ Non-activated device with a bootstrap profile
▸ Non-activated device with a commercial profile
There are several device deployments options with eSIM: • Activation and subscription provisioning
should be implemented via Local Provisioning Agent (LPA) / Companion Device or Connection
• Device can go online and can pull proper
subscription or get provisioned
• Only activation required, no provisioning needed
Celsium SM-DP+ Operator
End User
EUM
CI
Celsium IoT.SIM
Device
LUId LPDd LPAd
ES2+
ES10c
ESeum
ESeu
ESop
ES10b
ES9+
ES8+ES6
LDSd
ES10a
SM-DS
ES12
ES11
ES15
ESci
ESci
Part of IoT Test Bed
SM Roles
ProvisioningArchitecturewithLPAd
ProvisioningArchitecturewithLPAe
Celsium SM-DP+ Operator
End User
EUM
CI
eUICC
Device
ES2+
ESeum
ESeu
ESop
ES6SM-DS
ES12
ES11
ES15
ESci
ESci
LUIe LPDe
LPAe
LDSe
ES8+
ES9+Evolution of the original Remote Provisioning for M2M
Part of IoT Test Bed
Thank you for your attention!
We’re pleased to answer your Questions!
Thankyouforyoura\en=on!
Email: [email protected] Web: www.cellnetrix.com
Cellnetrix GmbH Holstenkamp 54, D-22525 Hamburg, Germany Tel. + 49 40 49022 360 Fax.+ 49 40 49022 358