Basic Wire Jewelry Making Project – Create Your

Own Charm Necklace

To create your own charm necklace, you can use the

most basic wire wrapping techniques as well as a few

common supplies such as acrylic rhinestone bead

and abacus glass bead. And as being regarded as a

basic jewelry making project, we have involved all

detailed steps in the article. Just enjoy your first

experience!

Acrylic Rhinestone Bead

10mm Abacus Glass Bead

12mm Tube Glass Bead

Lobster Claw Clasp

Chain

Eyepin

0.5mm Brass Wire

Side Cutting Pliers

Flat Nose Pliers

Round Nose Pliers

How to create your own charm necklace?

Step 1: Make the adorable charms and other components

How to make basic wire jewelry? Create your own charm necklace out of several drop beads, inches of

0.5mm brass wire and chains. All techniques required are simple and easy-to-master!

1st, take your brass wire and acrylic rhinestone

bead, use the technique: how to cover a

briolette to turn your beads into dangling

charms. Make 5 totally for one necklace;

2nd, get an eyepin, string one 12mm tube glass

bead, and make a simple loop at the other end.

Make 4 units total;

3rd, replace the tube bead with 10mm abacus

glass bead and make 2 units in the same way;

Supplies needed in the jewelry making project:

Done!

Would you like to try the way creating your own

charm necklace? Just stay tuned for more basic

jewelry making project! It’s actually a pleasure to

share all inspirations here with you guys!

Shop for different styles of beads please clicks:

http://www.pandahall.com/

Step 2: Assemble the 3 components

above

1st, open the loop of the tube bead unit, slide on

the acrylic rhinestone charm and then another

tube bead unit. Repeat this action until you use all

of them;

2nd, adorn one 10mm abacus glass bead unit at

two ends.

Step 3: Add on the rest chain

1st, cut two strands of chain, measuring

about 12.5cm long for each;

2nd, open the loop of 10mm abacus glass

bead units and attach the chain strands on;

3rd, add on the clasp.