Role of Quarter Turn Ball Valve in Various Industries In various industries a lot of new tools and devices are used for increasing efficiency and productivity. In this category, valves are getting widely popular. These valves are used in small as well as large scale industries to control and manage the flow of liquids and chemicals. The best part of this device is that it offers Great circulation capacity with Zero seat leak and positive convert off.

Quarter Turn Ball Valve is flow control devices that are used to control the circulation of fluids or some other liquid through a tube. In this valve, a ball is placed in a passage through which fluid moves. The ball has a hole, by which the device opens and closes. When the ball is in this way where the gap operates the same direction as the passage, the fluid simply moves through the gap, and the device is open. However, when the ball is in this way where the gap is vertical based on the passage, the fluid cannot pass through, and the valve is shut.

The ball is managed from outside of the device, often with a handle that can be turned 90 degrees, or a one fourth convert, back and forth for opening and closing the valve. Therefore, ball valve is an superb choice for shutoff programs.

Apart from this quarter turn valve, solenoid valves are also widely popular in the market. These electromechanical valves are managed by avoiding or running electricity through a solenoid, to be able to change the state of the device. A solenoid is a coil of cable that is magnetized when power operates through it. The solenoid device creates use of this solenoid to be able to stimulate a device, thus managing discharge, air circulation and other things with power. Basically, there are three types of solenoid valves, the general-purpose kind, low-pressure vapor kind and the high pressure vapor kind.

3 port solenoid valves also consists several parts such as the electrical connector, solenoid coil, bonnet nut, seal cartridge, O-rings, end connector, body and union nut. All these elements are critical to the overall performance of solenoid valves. If any breakdown, it will affect the entire function of the automotive starter system, as well as the commercial air hammer and the electric bell assembly. That is why this should always be managed and regularly examined to be able to keep the solenoid valves performing at their best.