Embed Size (px)
DESCRIPTION
Get high quality liquid ring vacuum pump from PPI Pumps that is a leading vacuum pump manufacturing company in India providing wide array of vacuum pumps including liquid ring vacuum pump, single cone vacuum pump, two stage vacuum pump, close couple vacuum pump etc for various industrial applications. This slideshare presentation shows important features and applications of liquid ring vacuum pumps offered by PPI Pumps Pvt. Ltd. For more information and getting the best quote of this pumps, visit - http://www.ppipumps.com/products_lrvp_pl_series.htm
Citation preview
Welcome To
PPI Pumps Pvt. Ltd.
www.ppipumps.com
Liquid Ring Vacuum Pump
The liquid ring vacuum pump is designed to handle liquid, water, gas and air movement applications in various industries.
They are mainly used as vacuum pumps but can also be used as gas compressors.
PPI Pumps Pvt. Ltd.
PPI Pumps is a leading vacuum pump manufacturing company in India providing wide array of vacuum pumps including liquid ring vacuum pump, single cone vacuum pump, two stage vacuum pump, close couple vacuum pump etc for various industrial applications.
Liquid Ring Vacuum Pump from PPI Pumps Pvt. Ltd.
They are used in vacuum filtration, extracting moisture and removal from pulp during paper processing.
They are capable of handling high volumes of vapors, condensable and liquids.
They are the most used vacuum-producing machine in industry.
They are widely used in sugar mills, oil refineries, distilleries, coal, power plants and mines.
Applications of Liquid Ring Vacuum Pump from PPI Pumps
Central Vacuum Systems
Boiling Processes
Vacuum Condensing
Drying Systems
De-Aeration
Filtration
Distillation
Sterilization
Impregnation
Solvent Recovery
Vacuum Hold Down
Mineral Beneficiation
Ash Handling
Important Features of Liquid Ring Vacuum Pump offered at PPI Pumps
SEPARATOR / MANIFOLD
PUMP MOUNTED SEPARATOR
FREE STANDING SEPARATOR
AISI 316.NON-RETURN VALVE WITH LOW PRESSURE DROP
ATMOSPHERIC AIR (or gas) OPERATED EJECTOR.
AUTOMATIC DRAIN VALVE
VACUUM RELIEF VALVE
Separator / Manifold
The separator or manifold is installed in place of the discharge manifold. It separates the seal liquid from the gas. It is made of carbon steel or stainless steel.
Pump Mounted Separator
This is also part of the discharge branch. It separates the gas and the liquid. It is made of carbon steel or stainless steel pipes and fittings.
Free Standing Separator
Facilitates separation of gas/liquid mixture. It uses a circuit and cooled by a heat exchanger. It provides excess liquid drain valve and connection for pressure gauge.
Aisi 316.Non-Return Valve With Low Pressure Drop
The non-return valve is installed between the suction flange and counter flange of the suction pipe. It prevents backflow into the system if the pump stops. It has a very low pressure drop hence suitable for high vacuum conditions. It is made in a variety of materials.
Atmospheric air (or gas) operated ejector.
This is installed on the suction branch and uses air from the atmosphere as motive air.
Automatic Drain Valve
This is used to drain the pump casing down to the centre line when the pump is stopped. This Prevents starting the pump with the casing full of seal liquid and avoids heavy starting loads.
Vacuum Relief Valve
This is a manually adjustable safety valve. Used to control the degree of vacuum and assist in the prevention of cavitation.
Contact Us
PPI Pumps Pvt. Ltd.
14 & 16 E, Phase I,G.I.D.C. Estate, Vatva,Ahmedabad - 382 445,
Gujrat (India).
Phone:+91 (79) 25832273 / 4Fax:+91 (79) 25830578
E-mail: [email protected]
Thank You
PPI Pumps Pvt. Ltd.
