Welcome to Dutest Established In 1980, Dutest is one of the first and most

experienced third party inspection bodies and suppliers of lifting equipment throughout the UAE.

Products and Services

Dutest contains two inter-divisions that cater to servicing the market of petroleum, metal manufacturing, shipping, contracting and crane rental companies to name a few. These inter divisions are inspection and supply. The inspection division inspects tests and certifies the entire range of lifting gear and equipment, as well as other industrial equipment. The supply division aids the inspection division through a variety of lifting accessories as well as catering to general market demand.

About Dutest Dutest is one of the most experienced third party inspection companies throughout the UAE. Established in 1980, our services have extended across an exhaustive list of prestigious clientele. We understand the local market and the growing importance of occupational safety throughout the Middle East and, henceforth, the necessity to provide proficient, robust and consistent goods and services. The implementation of various quality management systems, such as ISO 9001:2008 and ISO/IEC 17020:1998, as well as an international member of the British Standards Institute, verifies our commitment to providing a quality-consistent product, all backed up by an experienced LEEA (Lifting Equipment Engineers Association) qualified engineering team. This, considering our professional approach, competitive rates, exemplify why we remain one of the market leaders today.

SEE OUR BRANDS:

Divisions Manufacturing & Tradinging

The supply division of Dutest provides a wide range of lifting accessories and safety equipment. This division aims to complement its inspection and testing division, whilst also satisfying general demand for such products in the market. Some of the product range fall under the headings of Wire Rope Slings and Accessories, Chain Slings, Webbing Slings, Chain Blocks, Load Indicators and Load Cells. All of these products conform to internationally recognized standards such as BS EN, ASME and more.

Inspection & Testing

The Inspection division of Dutest is involved in third party inspection services of a wide range of heavy plant, cranes and lifting and marine machinery. Some of the brands that Dutest is specialized in servicing include Demag, Kone, Liebherr, Kato and Tadano. These inspection services are carried out with state-of-the-art technology such as Eddy Current, Thermal Imaging, NDT inspection (such as MPI and Dye Penetrant Testing). This, combined with quality engineers who have all been built on rigorous training and years of experience and who all are LEEA body audited, ensures the highest quality and reliable inspection and testing services.

Lifting Supplies Products

Chain Slings & Fittings

Wire Rope Slings & Fittings

General Lifting Gears

Shackles

Webbing Slings

Force Measuring Equipment's

Inspection & Testing Services The Inspection Division of Dutest is involved in third party inspection services of a wide range of heavy plant, cranes and lifting and marine equipment of brands such as Demag, Kone, Liebherr, Kato and Tadano to name a few. These inspection services are carried out with state of the art technology such as Eddy Current, Thermal Imaging, NDT Inspection such as MPI and Dye Penetrate Testing. This combined with quality engineers, which are all LEEA body audited, ensures the most highly qualified and reliable inspection and testing services. In addition, the company complies with highly regulated standards such as ISO 9001:2008 & ISO/IEC 17020:1998 that are both continually audited and renewed by Det Norske Veritas and Dubai Accreditation Center.

Dye Penetrate Testing :

Dye Penetrate is a method of detecting surface flaws (cracks) using a chemical ink and a developer. The basic principle is to spray the area to be checked with a penetrating ink (Red) which will leech in to any surface defects. This is then cleaned off. A developer (White) is then sprayed over the same area and any residual ink will show through the white indicating the location of any surface defects. The sample or area to be inspected must be clean and free from paint, corrosion or other surface coatings. Can be used on both ferrous and non-ferrous material, will only detect surface cracks.

Thermal Imaging

Thermal Imaging (Thermography) is an optical method of recording heat signatures of plant equipment and structures while in operation and location abnormalities or temperature differences. This can be used in several ways. As a preventative maintenance tool to show up items running hot, hot spots where an item may fail or cause a fire or heat loss through insulation or thermal bridges. It can also be used as predictive maintenance, where a bench mark image is taken and then compared with subsequent images taken at a set period (say six months). This will show up temperature changes, which may indicate deterioration of a process or equipment, allowing scheduled maintenance to be planned so as to minimize impact on production or services. Thermal imaging can also be used to investigate or locate leaks or water ingress and insect damage or just measure the thermal efficiency of a building.

Heavy Lifting Supervision Heavy Lifting Supervision is carried out by Dutest occasionally. One example would be the load out of 70 tons diesel generators from Sharjah Saif Zone, UAE to Afghanistan. Effectively, Dutest takes charge of the planning, supervision of a lifting operation from the early “Method Statement” phase, to “Lift Plan” and supervision and execution of the actual lift, choice of crane and lifting tackle.

Load Testing Load testing is part of Dutest’s normal crane and lifting gear examination and consists of applying a load of suitable proportions to establish the integrity of the item being tested.

Tirak / Minifor Services Tirak and Minifors are rope hoists manufactured by Tractel France. Dutest is one of the official service centers for these machines.

Crane Safety Equipment Installation, calibration and maintenance of safe load indicators and tensile cells, as well as training services for the Dutest SLI brand of load indicator are available in association with Cantek (Australia). EOT Crane installation, maintenance and repair services also available.

Recognition Dutest one of the leading lifting inspection companies in the region. The quality and reliability of our service is backed by a set of certifications, in-line with both national and international standards.

ISO 9001:2008 Quality Management System Det Norske Veritas approved manufacture, renewed and audited annually

Lifting Equipment Engineers Association Accredited engineers with over 25 years experience:

Accredited and audited by the Dubai Accreditiation Center as per ISO/IEC 17020 : 1998.

Dubai | Abu Dhabi

PO Box 5389, Dubai, UAE.

Tel: +971-4-8067700

Fax:+971-4-8067701

Email: dutest@bindasmal.com

Website: www.dutest.com

At Your Service- contact

OMAN | KSA | QATAR PO Box 1084, P.C. 130, Al Misfa New Industrial Area, Sultanate of Oman Tel: +968 2443 7226 Fax: +968 2443 7220 Email: dasmaltrading@bindasmal.com Web: www.dasmaltrading.com

Regional Sales Network: