Know About Plummer Block

Plummer block

Since bearings are designs that are the alternative applications, it is the most economical way to handle a given level of speed and load capacity. It requires weight and space to carry a given load at a desired speed.

Plummer block

Bearing housings are typically composed of grey cast iron, but different grades of metals may be used to come up with the same. We at RiccoTek believe in delivering quality tested products to the clients as they are very brand sensitive.

Plummer block

Since, there are various types of bearings and numerous applications can be hard to keep them all straight in line. Plummer block, also known as pillow block is a pedestal which works as a support to the rotating shaft along with compatible bearings and other accessories.

Plummer block

Generally made of cast iron or cast steel, these are housings that have a bearing fitted into them where the user don’t have to buy the bearings separately.

Plummer block

These pillow blocks are typically mounted in cleaner environments as they are intended for lesser loads in the general industry.

Plummer block

The rotation of the bush inside the bearing housing is arrested by a snug at the bottom of the lower brass. The cap is tightened on the Plummer or pedestal block by means of bolts and nuts.

Plummer block

The Plummer block enables safety in their outer ring to be stationary and at the same time allowing rotation of the inner ring. The housing is bolted to a foundation through the holes in the base.

Contact Us

RiccoTek Bearing Suppliers

Yindou NanLi, JimeiDistrict. Xiamen, China 361021TEL: +86 592 5759801FAX: +86 592 5759802

Website:http://www.riccotek.com